Printing w/out gray formatting box

I am new to Numbers, moving from Excel. For some reason when I print my sheet/table (only one page) whether from print view or not, the gray formatting box is visible (in preview) and is then printed. How do I get rid of it?

what do you mean by formatting box? Do you mean the grid lines? Remember that Numbers is true Wisywig. Meaning that what you see is what your going to get. So if you see grids when the table is not selected, your going to see them when it prints. You will want to select your grids and set them to none.
setting grid line settings can be a bit confusing. I use the inspector to do it. I select my cells, then I pick what lines I want to set, then pick the "None" setting. So its select the cell(s), then which border you want to set, then color and thickness.
Hope this helps you.
Jason

Similar Messages

Greyed out Volume Format box in Disk Utility 10.4.

Hi,
i'm trying to open up more space on my hard drive by doing a full erase. Available space is about 6GB on a 80GB drive. Running OS X 10.4.11. on a Mac Book Black. Want to install 10.6. SL.
In Disk Utility the Volume Format box is greyed out. It's set as Mac OS Extended (Journaled).
How can i change it?
Thanks for any advice.
Mark

How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/

Connected wirelessly to Canon printer MX340. Duplex printing option is grayed out for me but not on my daughter's non-Mac laptop or husband's PC which is connected to the printer. Mine has two-sided option available at the Apple store. Any ideas?

We use a Canon MX340 series printer/fax/scanner. My husband has his PC hooked to it and my daughter prints wirelessly from it with no problem with her non-Mac laptop. I have trouble printing. Often it does not print and I have to delete the job from the queue. Other times it will print OK but two-sided printing is always grayed out in my printing options. When I took it to the Apple store and printed on their network (selecting their printer) the two-sided option was available. Makes me think the printer is set up wrong, but I am not certain. A fw times at home when trying to print I got an error message about incompatible fonts, but it printed anyway after deleting the job and starting over. Does anyone have any ideas? Thanks

OK, just an update.
Two years into this, I still find I can only do full duplex printing by using Windows XP running inside of VMWare. I've had occasional, ephemeral luck with duplex printing, but nothing long lasting.
I've tried this in Tiger and Leopard (now at 10.5.6), and I've had this issue with Canon printers MP780 iP4300 and MP610, direct connected to my Core2Duo 17" MBP. I also have this issue when printing over a network, but that's a much harder problem to solve.
Currently, this is my #1 most pressing issue for my Mac, because not being able to print from a computer when you print a lot is a really big drag, and using VMWare all the time is also a really big drag. Other people posting seem to be able to print in Duplex using the very same printers. What could be wrong with my MBP? I see the duplex box option, but most of the time it's grayed out as if my printer doesn't support duplex.
I've tried direct selecting printer drivers from the system preferences, but nothing seems to have an effect. And this is off of a clean Leopard install.
My wife now has similar problems with her new MBP - the Canon print drivers (CUSP & non CUSP) aren't allowing the Duplex box to be checked.
I am willing to pay good money to anyone who thinks they can fix this problem.
Thank you,
- Jeff

HP 4510 Prints Skew/Slant out of the box on 2 different printers

I have purchased and returned (2) 4510tn laser printers that prints skewed/slanted (very minor) right out of the box. Have worked with HP support to find a solution but they don't even acknowledgement that the problems exist. I believe this is a defect across the entire line since the same thing happened with two brand new printers. Has anyone out there experience the same problem?

Hi Chris,
This sounds interesting.
My first thoughts is that you have some sort of printer class configured, although this works as a load balancer for print jobs, it is not supposed to split a single job amongst the printers in the pool. Anyway, to check if this is set, you can open the Printer Setup Utility and look at the printer list. In the King column, you will see Printer Pool.
Another thought is network addressing. If you are using TCP/IP to connect to these printers, any chance there could be an IP address duplication?
Also, are the Mac's connected directly via IP to these printers or are they connecting via a share from a print server?

Framemaker 8 Embedded Graphic prints as a Gray box

Sometimes when I save my book as PDF, an imported graphic prints as a gray box in the PDF and then corrupts the framemaker source file.
It loses the graphic (an imported .WMF file) and substitutes a gray box.
Framemaker 8.0p277 on Windows XP SP2.
Has anyone else seen this problem ?

If it is imported by copy or as an OLE object, then it is known to happen. Try importing by reference.

Print Report in PDF format

I have a report region based on sql query. I want to print that report region in PDF or word format. How can I do that.
It may further be stated that I dnt have print server configured. Is it possible to do this wihout the configuration of report server.

Syed,
If you want to use the PDF printing functionality built into APEX 3.0, you do have to configure a print server, see this document for further information:
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
There have been discussions on other solutions on this forum, but whichever solution you choose, you'll need to install something that actually generates a PDF or Word (or RTF) document. As an alternative, you could perhaps use the CSV export to open your report in Excel, that option is available out of the box.
Regards,
Marc

Vanilla vs Out of the box implementation ?

hi all,
can some one please tell me whats the difference between vanilla implementation and out of the box implementation ?
regards,
deepak

Both are same thing
Vanilla means cheap, basic and plain. No customization only configuration changes UI related change such as change the color of application user message dialog mesages etc.This means that the product is used strictly in accordance with the way the product vendor intends it to be used
So Basically you can only configure the product using various parameters provided by the vendor as example you can add your parameters, region codes, user messages, dialog message, change print receipt format , logo changes etc you cannot change any functionality.
Regards
Kapil Pant

Not able to start out of the box approval workflow programmatically

We have a requirement to start an out of the box workflow from a .NET web service.
We are using the StartWorfklow method:
wfManager.StartWorkflow(item, association, association.AssociationData
we are getting the below error message at the above line of code: Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal
Then, we tried:
SPSecurity.RunWithElevatedPrivileges(delegate()
        wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Now, the workflow got canceled automatically with "Failed on Start" status. In the "Workflow History", it is showing 2 records with "was canceled by System Account." & "failed to start" in the description
column.
Please advise.

Hi Zhengyu,
1. I've already done that:
a) when "SPSecurity.RunWithElevatedPrivileges(delegate()"
is used, there are no errors showing up and code gets executed. However, the workflow failed to start.
b) When I don't use elevated privileges, the code is showing an error (Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal) when
it tries to start the workflow (StartWorkflow method).
2. The workflow starts with no issues through UI. I tried it using "System Account" and another account.
3. I tried also "Collect Feedback" workflow template. Same results...
You can find the code below:
public
stringStartItemWorkflow(stringsitePath,
stringlibraryName,
stringfileName)
stringreturnVal =
String.Empty;
stringwfName =
"VPApprovalWF";
SPUserTokentoken = GetSecurityToken(sitePath);
try
using(Microsoft.SharePoint.SPSiteportalSite
= newMicrosoft.SharePoint.SPSite(sitePath,
token))
using(SPWebportalWeb
= portalSite.OpenWeb())
                    portalWeb.AllowUnsafeUpdates =
true;
SPListlist = portalWeb.Lists[libraryName];
SPQueryfileQuery =
newSPQuery();
                    fileQuery.Query =
String.Format("<Where><Contains><FieldRef
Name='FileLeafRef' /><Value Type=\"User\">{0}</Value></Contains></Where>", fileName);
                    fileQuery.ViewAttributes =
"Scope='RecursiveAll'";
SPListItemCollectionlistItemCol = list.GetItems(fileQuery);
SPWorkflowManagerwfManager = portalSite.WorkflowManager;
SPWorkflowAssociationCollectionassociationCollection
= list.WorkflowAssociations;
if(listItemCol.Count > 0)
foreach(SPListItemitem
inlistItemCol)
if(associationCollection.Count > 0)
foreach(SPWorkflowAssociationassociation
inassociationCollection)
if(association.Name == wfName)
                                        item.Update();
                                        association.AutoStartChange
=
true;
                                        association.AutoStartCreate
=
false;
                                        association.AssociationData
=
String.Empty;
                                        StartWF(wfManager,
item, association);
                                        returnVal +=
"Workflow Started";
break;
else
                                returnVal +=
"No workflows are attached to the library.";
else
                        returnVal +=
"A file with the name provided doesn't exist";
                    portalWeb.AllowUnsafeUpdates =
false;
catch(Exceptionex)
            returnVal +=
"Workflow not started, reason: "+
String.Format("Source:
{0}. Stack Trace: {1}. Inner Exception:{2}. Message: {3}. Data: {4}", ex.Source, ex.StackTrace, ex.InnerException, ex.Message, ex.Data);
returnreturnVal;
SPUserTokenGetSecurityToken(stringsitePath)
SPUserTokentoken =
null;
SPSecurity.RunWithElevatedPrivileges(delegate()
            Microsoft.SharePoint.
SPSiteportalSite =
newMicrosoft.SharePoint.SPSite(sitePath);
            token = portalSite.RootWeb.EnsureUser(
"DOMAIN\\ADMIN-USER").UserToken;
            portalSite.Dispose();
returntoken;
privatestaticvoidStartWF(SPWorkflowManagerwfManager,
SPListItemitem,
SPWorkflowAssociationassociation)
SPSecurity.RunWithElevatedPrivileges(delegate()
            wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Thank you all for your help.
Regards,

HP Pavillion Does NOT work Straight Out of the Box after Purchase

My daughter bought a new HP Pavillion from Office Depot before starting computer classes at the university. The first one would not work at all and after the tech folks tried all that they could and it would not work, the Office Depot staff exchanged it for another one. Straight out of the box, it does not work. It crashes constantly. My daughter has spent HOURS that she needs for assignments on the phone with HP tech support. Here is where she stands with the situation now: She bought the extended warranty, but apparently that does not cover computers that don't work. The HP warranty....does not apparently assure that you get a working computer either, even when it's just days old and won't function. So....after spending from about 1p to nearly 6p today on the phone with HP tech support, she is not assured that it will work.
They are calling back on Friday to see.
So if it is NOT working, are we just out of luck with a piece of junk that does not function except as a word processor? That won't connect to the internet without crashing? We have been given no options or assurances.
( Post edited by Moderator) When you buy a computer, it should work when it's brand new. If you have a warranty, does that mean that HP stands behind their product and refund the consumer's money when it doesn't? The new HP Envy printer did not work, due to a defective ink cartridge enclosed with it. Does any HP product work at all?

@Mariellynne
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
I work for HP

Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t

Dear all,
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of the A/R Invoice
I have to Create a Print Lay out design of the A/R invoice for the Indain standrad please provide me some solutions for the following problems to locate the Tax combinations,Tax rate and the Tax amount in the PLD A/R Invoice ,
PACAKGE SAP B1 2005B
Need a standrad solution as per the requriment
Eg: Row Level
Tax Code created is BED+VAT
Tax combination details is
Name of Tax type   Rate
Excise                     16%
Ecess                    2%
Hcess                    1%
VAT                       4%
Row No     Item Qty   UnitPrice Tax code Total(LC)    Tax Amount
1             X      10     10000      BED+VAT   100000      21139
                                         (Excise =16000,Ecess=320, Hcess=160, VAT=4659)
2              Y      5      20000      BED+VAT    200000       42278
                                        (Excise =32000,Ecess=640, Hcess=320, VAT=9318)
In Print Lay out Design Requried is the deatils of Tax code combination , Rate and the Tax Amount in the followig way
Excise    16%   =48000
Ecess     2%    =960
Hcess     1%    =480
VAT       4%    =13977
Please send the feedback as early as possible urgently requried
for the further details send the feedback
Reagrds
Mr.Chitrasen

Hi experts,
       Pls anybody have an answer to my question, i'll be very thankfull to u,
                 I wanted to display the Tax Break ups in Invoice say,
ECess            25
Vat                 56
Excise duty    32
I've tried a lot with many of the SAP Forum thread but the results is not satisfactory..am using SAP Business One 2007 b
pls anybody who can guide me with step by step PLD creation for this problem.
I done the below steps in PLD
In Repetitive area 1
Field_1: Table-> OSTA
              Column-> Type
Field_2 : Table-> OSTA
              Column -> Code
Field_3: Table-> OSTA
              Column-> Rate
Field_4: Table-> OSTA
              Column-> Name
Field_5: Table-> A/R Invoice Tax amount per document
                Column-> Tax amount
Field_6 : Table-> A/R Invoice Tax amount per document
                Column-> Base amount
Field_7 : Formula -> Field_6 * Field_8
Field_8 :   Formula-> Field_1==1
      NOW I SORTED REPETITVE AREA 1 WITH 'SALES TAX AUTHORITIES;cODE' AND TICKED THE CHECK BOX 'SUMMARY'
    AND MADE THIS REPETITIVE AREA INVISIBLE.
IN Repetive area footer
F_01 :    Formula->   Field_4
F_02 :    Formula->   Concat(Round(F_rate,0), '%')
F_03 :    Formula->   Round(ColSum("F_tax_amount"),2)
I grouped the Repetitive area footer as Group 1
                            here i get the result but the Tax Rows are repeating and Tax amount varies for VAT for each rows
pls help me guys...
               Thanks in advance,
               Dinesh
Edited by: Dinesh S on Dec 23, 2011 1:28 PM

How do you get a list of your contacts nick names and their phone numbers on line and print them out?

How do you get a list of your contacts nick names and their phone numbers on line and print them out? I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site. Does anyone know how to do this?

Log into your online account. In the, 'I want to', box type, Manage Contacts.
Place your cursor over any contact, a pop screen will appear with the option to print your contacts

I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

Polly,
usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste.

12GB already used on out-of-the-box refurb MBP?

Hi-
Just a quick question--
My refurbished 15-inch MBP (2.2 Ghz, 120 GB hard disk) just arrived. I took it out of the box, started up and registered, and was planning to shift things from my old Powerbook G4 in Target disk mode, etc, but haven't done ANYTHING else yet. Out of curiosity I clicked on About this Mac, and saw that my HD has a capacity of 111.47 GB (I understand that "120 GB" probably means about 111 GB in reality), but that there is only 99.05 GB available, and 12.42 GB already used. Is that how much is needed for the basic Tiger (10.4.10) and applications that came preloaded on my MBP? If not, any ideas why 12.42 already used? Should I do an erase-and-install with Tiger OS? Do you think Apple didn't fully clean or erase the disk?
Thanks,
Samantha

When Apple says "120 GB hard drive" they mean 120 billion bytes. But strictly speaking, 1 GB is 10243 bytes, not 10003 bytes.
So when Finder says "111.47 GB capacity", it means 111.47 gigabytes, which is 111.47×10243=119.69 billion bytes. So your question is actually what happened to the missing 296 MB (or 0.31 billion bytes), and the answer is one of rounding error, disk overhead, or an extra partition on the hard drive used for booting. (The Boot camp forum has comments about an "extra" 300MB partition on the hard drive.)
Unfortunately, the misleading "x GB hard drive" label for what is really an x÷1.0243 GB drive has become an industry standard, and is always stated in the fine print.

Out of the box execution plan for Payables EBS 11.5.10

Has anyone else experienced performance issues with the out of the box execution plan for the Payables subject area for Oracle EBS 11.5.10? Our incremental ETL for this particular subject area is taking 8+ hours. I understand that there are several factors involved with performance and that there are a lot of AP transactions, but this is ridiculous for a nightly incremental ETL job.
In particular it is the SDE_ORA_APTransactionFact_Payment task that is taking forever. This query appears to have extremely high cost (see explain plan below). Has anyone been successful in rewriting or changing this query?
SELECT STATEMENT ALL_ROWSCost: 586,953 Bytes: 16,550 Cardinality: 50
            13 NESTED LOOPS OUTER Cost: 586,953 Bytes: 16,550 Cardinality: 50
                        10 NESTED LOOPS Cost: 586,952 Bytes: 15,800 Cardinality: 50
                                    7 HASH JOIN Cost: 468,320 Bytes: 11,693,526 Cardinality: 59,358
                                                5 HASH JOIN Cost: 429,964 Bytes: 9,200,490 Cardinality: 59,358
                                                            3 HASH JOIN Cost: 366,009 Bytes: 7,740,544 Cardinality: 60,473
                                                                        1 TABLE ACCESS FULL TABLE AP.AP_AE_LINES_ALL Cost: 273,240 Bytes: 15,212,604 Cardinality: 230,494
                                                                        2 TABLE ACCESS FULL TABLE AP.AP_INVOICE_PAYMENTS_ALL Cost: 45,211 Bytes: 715,512,860 Cardinality: 11,540,530
                                                            4 TABLE ACCESS FULL TABLE AP.AP_PAYMENT_SCHEDULES_ALL Cost: 39,003 Bytes: 309,648,420 Cardinality: 11,468,460
                                                6 TABLE ACCESS FULL TABLE AP.AP_CHECKS_ALL Cost: 28,675 Bytes: 130,126,920 Cardinality: 3,098,260
                                    9 TABLE ACCESS BY INDEX ROWID TABLE AP.AP_INVOICES_ALL Cost: 2 Bytes: 119 Cardinality: 1
                                                8 INDEX UNIQUE SCAN INDEX (UNIQUE) AP.AP_INVOICES_U1 Cost: 1 Cardinality: 1
                        12 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_HEADERS_ALL Cost: 1 Bytes: 15 Cardinality: 1
                                    11 INDEX UNIQUE SCAN INDEX (UNIQUE) PO.PO_HEADERS_U1 Cost: 1 Cardinality: 1

Hi Srini, All,
Thanks for the reply.
The payables documentation (i.e. User Guide) discusses about options that could be used in implementing EFT. However, if possible, we would like suggestions on what would be the better ways to implement EFT (US bank) using either XML or text formats. We would also prefer not using e-commerce gateway or EDI.
Thanks in advance.
MM

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out?

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.

Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
Hope this helps,
NEIL

Printing w/out gray formatting box

Similar Messages

Maybe you are looking for