Printout not sharp after replacing toner HP 100 NW175

My HP100 NW175 is just 1 year and 2 months old. Printouts are nog sharp, even the black printouts are vaguely. Replaced the toners for official HP toners, but the printouts are of bad quality (almost unreadable). We did a cleanup/checkup/restore factory default, but the printouts are still not good readable.
What to do?
Thks
Eric

This doesn't work to get it better. We now ordered a refurnished printer to replace the current one and use the new toner.
Thks

Similar Messages

My HP LaserJet 1536dnf Printer is printing black pages after replacing toner with a new one!

I changed out the toner cartridge for my HP LaserJet 1536dnf printer with a genuine HP toner cartridge and now it is printing out black pages. Any suggestions as to how to fix this?
Thanks!
This question was solved.
View Solution.

Hi @Beaglemom49779,
I see by your post that you replaced the toner and are now getting all black pages. I can help you with this.
Did you have the same issue with the printer before replacing the toner?
It could be a hardware or fuser issue with the printer.
If the issue just started after replacing the toner then most likely it is the toner.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Number one cause of toner issues.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, black on the drum, or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
Please call our technical support if the there is a issue with the toner and inquire about a replacement, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Desktop not sharp after installing Solaris 10 8/07 on an Ultra 10

Hi. I just installed the latest version of Solaris 10 on an Ultra10 and noticed that the desktop is not sharp. It's almost as though everything (background, Launch button, windows, etc) is misty. Oddly, the drop down menu displayed with right-click on the desktop is clear and sharp. Likewise, the contents of the Desktop Background Preferences window is OK, but the desktop selections and title bar are misty. If I try to change the resolution, an error is displayed saying 'The XServer does not suport the XRandR extension'.
Any ideas?
Andre.

I used to have a similar issue when connecting my computer by DVI instead the classic way.
After applying several updates the issue was gone for Solaris 10, but is still there for SXDE.
I think it has something to do with video card driver.

Black ink cartridge not working after replacing

I replaced the black ink cartridge on my HP Photosmart 6510 because the print was getting faded. Now the black will not print. I used an original HP replacement cartridge and inserted it according to specifications. I ran a test page and all colors printed except the black so I ran a printhead clean to no avail. I wet a paper towel and touched it to the ink and it is not dried up. Help!

It is definitely a hardware problem then. Try the steps in the document below. If that doesn't work, you will need to contact tech support. If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
Black Ink is Missing on Printouts
HP Technical Support Case Call Form

Hard Drive Not detected after replacing DC In Board

So after more than a year of jiggling an easliy bent AC adapter in the port to get my ibook G4 to charge it just quit and would not charge. I suspected it was the slightly loose DC in port (having no idea what was behind the little hole) so I took it to the Genius Bar at my local Apple Store where they confirmed it was likely the DC in board. I was told that just sending my little old ibook away to get fixed would cause an exorbitant $330 just to ship it out, never mind any parts, etc. It was suggested I just buy a new macbook and be done with it. But we've been through a lot and I didn't want to just toss her away so I found a DC In board and replaced it myself. Parts and directions courtesy of ifixit.com
So the part is working well enough that it detects the new AC Adapter (this one new and unbent), which is great. Now I have a slightly larger problem and that is the dreaded little finder/? flashing icon that comes up when I start the computer. It won't start in safe mode. I can't find the original disks (Panther OSX) that came with it. I popped in my Tiger Install Disk and that (Thankfully) came up so I was able to open Disk Utility and lo and behold no hard drive was detected. Just the optical drive and the Tiger DVD.
I was so careful! Did I poke the Hard Drive or something? Is she mad at me for opening her? If anyone has any advice on how I can repair this myself please let me know. I'm desparate to have my baby back.
Message was edited by: alemicia

It's possible that something was disrupted during the repair. You might go back to the ifixit site and look at the instructions for replacing the hard drive. You want to try and see if somehow you disconnected it or something like that. There's a good chance that it is something simple that you can fix. Looking at the pictures might trigger a memory of maybe something taken loose and not reconnected. And try to find your original discs--you will need them.
Good luck!

Pismo does not boot after replacing hard drive

We have had an old Pismo for several years now. Two or so years ago we decided to replace the stock 6GB hard drive, which was getting full, with a new 60GB drive. We cloned the old drive via target disk mode, popped in the new drive, copied the data back (again via target disk mode), and were surprised when we were met with the flashing question mark/system folder icon. Sort of left it at that and forgot about it.
I stumbled upon the Pismo again today and decided to see if I couldn't get it working. After going through a few "why won't this even turn on" sessions (the machine hadn't been powered on in a few years, so pulling the internal battery and resetting the PMU fixed that), I popped the old drive back in and the machine booted just fine. Cloned the original drive (again) using Carbon Copy Cloner via target disk mode to a disk image on my MacBook. Powered it down, put the new (60GB) drive back in the Pismo, cloned the disk image back to the new drive. The data's there, because I can browse it in target disk mode, but I can't boot off the new hard drive. I can't boot off my Tiger install DVD either - the DVD drive spins up and tries to access the disc, but won't boot. I'm going to try and get my hands on the CD version of Tiger to see if there's a difference using that.
Disk Utility on the MacBook says there's nothing wrong with the Pismo's hard drive, but I'm not convinced that's the case. I'd heard about Pismos being picky with certain types of hard drives, is this true? If not, what other issues might be leading to this behavior?

Is this perhaps an artifact of the drive being formatted via target disk mode on my MacBook
I suspect that the problem lies somewhere in that situation. I suggest that you boot from the install disk as I suggested previously and reformat the HDD and reinstall the OS.
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• Boot the MacBook Firewire Target Disk Mode.
• Insert install disk into MacBook's optical drive.
• Connect computers via firewire cable
• Option Boot Pismo.
• Select Install Disk for startup and click on the straight arrow.
• Select language
• Go to the Utilities menu (Tiger and later) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Apply/Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
cornelius

Windows 7 it's not genuine after replacing hdd

when i replaced my HDD it said my windows its not genuine
please help me with this diagnostic report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-X92GV-V7DCV-P4K27
Windows Product Key Hash: aU2z1/fnhnLHmhBm699qYZT2E6s=
Windows Product ID: 00426-OEM-8992662-00400
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {34E34A68-5F59-44BD-AFB9-4EFBF139FBD8}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.150113-1808
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-b063_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{34E34A68-5F59-44BD-AFB9-4EFBF139FBD8}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-P4K27</PKey><PID>00426-OEM-8992662-00400</PID><PIDType>2</PIDType><SID>S-1-5-21-3541619342-1083094025-1635991396</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Studio XPS 8100</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A04</Version><SMBIOSVersion major="2" minor="6"/><Date>20100510000000.000000+000</Date></BIOS><HWID>A47C3A07018400FE</HWID><UserLCID>4409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Malay
Peninsula Standard Time(GMT+08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>FX09   </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>83D84101F291D86</Val><Hash>gN+n9+Zg3Fc66TYV4mB8Ojpnl2g=</Hash><Pid>89388-707-4698546-65580</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/><App
Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600400-02-1033-7600.0000-2382010
Installation ID: 009590547984544452517161397686184321135374755541796886
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: P4K27
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/3/2015 5:00:04 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 3:2:2015 16:46
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: LgAAAAIAAAABAAEAAgABAAAAAQABAAEACrbCHBU/9tpagSq9d/ZQmRB6DHV2Vg==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value
OEMTableID Value
APIC
DELL
FX09
FACP
DELL
FX09
HPET
DELL
OEMHPET
MCFG
DELL
OEMMCFG
SLIC
DELL
FX09
OSFR
DELL
FX09
OEMB
DELL
FX09
ASF!
LEGEND
I865PASF
SSDT
DpgPmm
CpuPm

Dear chong2010,
what you are experiencing is not unheard of, part of the counterfeit protection on the MS OS involves taking note of certain aspects of the Hardware, including the hard drive, so changing the drive is VERY likely to trigger this reaction on part of
the OS.
All you need to do is to perform the validation process again, as you did when you initially installed the box (or initially used the box, if pre installed by manufacturer), using the same original windows key (you should have it in a label attached to the
box of the computer of in the supporting documentation of the purchase).
You can do this from "control panel" -> 'system security" -> "system" or by typing "
cscript slmgr.vbs /ato
in the command line (admin privs required in this command line)
Best Regards / Saludos, Marianok
Disclaimer: This post, and all included code and information is provided "AS IS" with no warranties or guarantees and confers no rights. Try it at your own risk, I take no responsibilities.
Aclaración: Esta publicación, y todo en código e información en la misma, es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún derecho. Pruebelo su propio riesgo. No asumo responsabilidad alguna.

Printer f2280 not printing after replacing ink

I have replaced ink cartridges on my deskjet f2280,but indicator showing empty. Followed few ideas of pressing power and cancel to reset and replugged cable but no change. Covered ink cartrige at the back to reset ink still no change???Kindly advise plz

Hello sergent6013,
Welcome to the HP Forums.
I see that after changing the inks in your Deskjet F2280 that the printer is still showing they're empty. I will try and assist you with this issue.
Here is a document: Blinking Lights, that may be of use to you. It would guide through steps and causes as to what my be going on based on indicators on your printer.
Also, this document: Faded or Dull Colors in Printouts, has a few steps that might be helpful too.
Try a combination of both, and see how things go. If you need further help, or have questions please let me know.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Windows XP (sp2) will not update after replacing the hard disk of my Presario V4435NR with a new one

Hi,
I had to replace my Presario V4435NR hard disk (80 GB) with a new 160 GB hard disk from Samsung. The original hard disk did not crash but was churning all the time and did not have enough space for all I wanted to put on it. I installed the new 160 GB hard disk (which of course did not have the recovery partition that my old one had on it) and ran recovery from the recovery DVD I made when I first bought the laptop. Everything worked fine until I tried to update my xp through windows update website. This is the error # I get from windows updates (0x80072EE2).
How can I get my xp to run updates sealessly as it used to before?
THank you
Abdul

I installed it already and things were fine (updates installed with no problems) for a while but the same problem resurfaced after I installed MS Office. Xp gave me the same error code when I tried to update. Woke up in the morning and tried windows update again and windows found lots of updates and installed them smoothly.
What is causing this inconsistency?
* Now, I'm unable to get any updates (windows updates website gives me the same error code)

Premier NOT sharp, After Effects very sharp.

I have this problem with Premiere Pro. I can't export and have SHARP video. I have tried many combinations, H264, AVI, Quicktime, etc. and all the Max settings with no avail, in particualr the dull Text.
When I use After Effects everything is crisp and sharp. I use Vegas Pro 12 with the same clip and it Renders very Sharp.
This is Windows 8, 12 GB memory. Cuda 670 Nvidea Card. I7 Quad Core.
Any pointers ? or reading material.
Much appreciated.

I've tried many combinations and getting these issues with Premiere, I have made some clips of what I am getting hoping you can point out what my issue is and help me out.
This is the Setting of a simple AE picture sequence rendered with sound.
http://img824.imageshack.us/img824/5269/aelossless.jpg
http://img69.imageshack.us/img69/9926/aebestsett.jpg (can't get the forum tools to work)
Here is the Screenshot of what was rendered with AE
http://img855.imageshack.us/img855/1153/aestraitoutofae.jpg
Here a shot of the above clip RENDERED through Premiere Pro (a part )
http://img153.imageshack.us/img153/1543/aepremiere1.jpg
Here is another continuos shot of what Premiere Pro puts out, it flickers between fuzzy and kinda sharp fequently.
http://img855.imageshack.us/img855/3883/aepremiere2.jpg
Here is the Premiere Pro Settings for the Render
http://img12.imageshack.us/img12/8017/aepremiere.jpg
Here is the same clip Directly from AE and Rendered Through Vegas Pro 12
http://img819.imageshack.us/img819/7030/aevegas.jpg
and Here are the settings for the Vegas Pro 12 for that render (no flicker)
http://img211.imageshack.us/img211/5613/aevegassetting.jpg
I'm sorry I could not use the Insert Image on the Forum, but it did not work for me.
Any suggestions, comments and help would be very appreciated.
Thanks.

A105-S4384 DVD drive not recognized after replacement.

I've seen the posts about deleting the filters from the registry on upgrade to Vista. That doesn't help my case.
I replaced the stock Mat**bleep**a drive when it stopped reading any type of disc. The replacement is a Toshiba TS-L632, which was sold as a compatible drive.
What I see is that in the BIOS, the drive is not recognized as Optical Drive, but on the Boot tab, the drive DOES show up as a boot option "TSST-L632H-..."
I do not see a CD/DVD drive option at all in the Windows Hardware Manager (ie. it isn't a matter of seeing an exclamation mark over the drive... it isn't there at all).
If I insert a disc, I hear the drive rev up and spin, but nada afterwards. There is no light active on the drive. Trying to install the L632's firmware is no good, as the installer just pops up a dialogue with "Drive not found!!" message.
I'm at wit's end. The Toshiba site isn't helpful in confirming the compatibility of the drive, but you'd hope that if they make laptops and laptop drives, they'd be compatible.

Although the drive shows up in the boot menu, can you actually boot from it?
Some Toshiba laptops needed the drives to be in CS (cable select) mode in order for them to function properly with the laptop. This can be done on an after-market drive by shorting two pins on the connector (and I have done it before, so it does work), but that may or may not be the problem. But the computer I had to do it to was quite a bit older than yours (M10-something).

Touchpad not working after replacing motherboard

Hello there, I had a bad motherboard a while back in my Pavilion g6t-2200 (Intel), After speaking with HP support, they told me they would replace it for $350, to which I declined, and opted to replace it myself. I bought a motherboard for a HP Pavilion g7-2240us motherboard, replaced it and everything works fine, all except for the touch pad. I have since checked and rechecked the connection to single ribbon cable to the motherboard. The LED next to the touchpad does not light up at all, and installing/reinstalling drivers does not do anything - keeps saying it cannot interact with the touchpad. It is NOT an issue where the touchpad is locked! Asking for your advice, please assist!
Gargamel314

Hello , Welcome back to the HP Support Forums! I read your post about the TouchPad, and wanted to assist you! Since you installed the motherboard for a HP Pavilion g7-2240us Notebook PC, have you tried installing the TouchPad Drivers for that model, instead of your current one? You can find the drivers for the model here, if needed:HP Customer Support - Software and Driver Downloads (HP Pavilion g7-2240us Notebook PC) You can also try reviewing the following document, as it may help to resolve the issue as well:HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad (Windows 8) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

LaserJet Pro 400 MFP M475dw doesn't print in color after replacing toner cartridges

Replaced all color toner cartridged when printer indicated they were empty. Printer is no longer printing in color. It's as though it doesn't recognize that new cartridges were installed. Is there something I need to reset on the printer?

Run a supplies status page from the report menu to see if any color appears. If it does you either have a driver issue or one or more of the colors cartridges is still reading as empty as there is a setting to print using black and white when one or more color cartridges are empty. I believe it is under the print quality menu.

Macbook Pro does not boot after replacing HD

I have a Macbook Pro that I bought in early 2007. It came with 10.4, and I have since upgraded to 10.5, and then 10.6.
I decided to upgrade the original internal HD to a 500GB HD. I used Time Machine to back up the orignal HD.
After performing the surgery, I turned on the MBP with my Snow Leopard install DVD. After a while reading the DVD, the MBP spits out the DVD and displays the folder with the question mark.
I then create a recovery disk on an 8GB Flash Drive, using the Snow Leopard install disk as a source. I plug in the drive, start the MBP and hold down the 'option' key. I get a grey screen with a mouse cursor, but no drive icons.
I'm puzzled. The install DVD seems to look fine on other computers, as does the flash drive. I'm planning on getting a HD enclosure and cloning my old drive to the new drive, but does anyone have any suggestions as to what's gone wrong?
Thanks!

Dale Weisshaar wrote:
After performing the surgery, I turned on the MBP with my Snow Leopard install DVD. After a while reading the DVD, the MBP spits out the DVD and displays the folder with the question mark.
Are you holding down the small case letter c the whole time. Keep holding it till the install screen comes up.
Did that, still tried to boot (sounded like the drive was reading), and still got the folder with the question mark, and the DVD was ejected.
Also, it has to be a retail disk of Snow Leopard. A machine specific disk that came with another Mac will not work. You need the universal copy.
Right, my MBP came with 10.4 originally, so this was a retail disk.

Mac Pro RAID 5 not rebuilding after replacing a failed drive?

I have a Raid 5 on a Mac Pro and one of the three drives failed. The RAID set was degraded so I replaced the drive and made it a global spare. At this point the Raid Utility is supposed to try and rebuild the RAID array but nothing happens. Any help?
Thanks.

It appears that the two drives (drive 2 and 4) that were part of the raid set JBODSet2 are not attached to any raid set now. How do I get the raid set back?
Mac-Pro:~ john$ raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 JBODSet1      480.10GB   IsMemberOfRAIDSet:JBODSet1 IsReliable IsJBOD
Bay #2 <none>          1.00TB   IsReliable IsNotAssigned IsRoaming
Bay #3 <none>          1.00TB   IsSpare IsReliable
Bay #4 <none>          1.00TB   IsReliable IsNotAssigned IsRoaming

Printout not sharp after replacing toner HP 100 NW175

Similar Messages

Maybe you are looking for