Prior H101 A/B Stage with Oasis Blue PCI control board

Greetings,
I have a Prior H101 A/B Stage driven by an Oasis Blue PCI control board. The control board has software that really doesn't fulfill my needs and I was wanting to roll my own solution via LabVIEW for controlling/programming the stage movement. I have built a LabVIEW library from the supplied DLL and .h files that works at least for what appears to be reading and writing registers on the board. However none of the activity commands (Homing the stage, move to location, etc.) responds to the associated calls.
Does anyone have any experience using LabVIEW with this board or stage? The company is not interested in assisting me, hence the appeal to the community. I've successfully done this with other DLL's but frustration is setting in early with this project, I suppose.
Any suggestions/ideas would be appreciated. The DLL/software library is available on the Oasis website (reluctant to post).
Thanks in advance.
TR
><><><><><><
Tommy R.
><><><><><><

The sample C code included in the manual appears to not set any registers. For example, the simplest program example calls "open", calls "InitializeXY", and calls "close" in order to have the stage recalibrate the limits (XY stage moves to limit switches in both directions).
I was thinking what you are suggesting might be necessary as well.
I can successfully set registers (ramp rate, max speed, etc), and read back those registers when the changes are made so I know I'm communicating with the controller, but the actuation controls (move x amt on axis {X}, goto x,y, etc.) don't actuate.
><><><><><><
Tommy R.
><><><><><><

Similar Messages

  • HT1689 my ipad mini retina display is disabled.  I believe I know the cause.  I packed it with my blue tooth key board in my back pack.  The key board likely entered various keys and the ipad believes these entries were invalid password attempts.  I am tr

    my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack.   How do I re-enable?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • FD Trinitron WEGA KV-30HS420 problem with Sony Blu-ray players

    I have a Sony FD Trinitron KV-30HS420 television, which has worked very well over the last 11 years or so.  I've owned a Sony BDP-S780 Blu-ray player for a few years, and it has worked very well with my TV.  I believe I updated the firmware on the blu-ray player a month or two ago, to the M07.R.0631 version from December 2014.  When I plugged a USB flash drive into the player - one I've used several times before successfully - the screen went black.  The only difference I can think of is that I created folders on the USB flash drive, and put the mp4s into the folders.  I think I may have had a similar problem with the blu-ray player a year or two ago when I also used folders on the USB drive, but I was able to fix the problem by unplugging the player and rebooting.  That did not resolve this issue. Now, if I try to turn on my player, which is hooked to my TV via HDMI, the "Sony Blu-ray" symbol appears as usual, then the thin blue line that stretches partially accross the screen horizontally, but at the stage where the screen will usually flicker and the blue line will expand to fill the whole length of the 16:9 screen, the screen instead turns black.  It appears the player is still functioning (as I'll explain below), but the TV is no longer able to process the signal. I spent several hours with Sony tech support going through everything - checking the connections, swapping HDMI cables, lowering the resolution on the player, and changing other player settings, but I still have the same problem.  If I hook the player up to a newer Vizio HD television, everything works fine - which is why the player seems to be functioning ok.  If I hook my HD DVR to my television, it continues to work fine as well - so I don't think it's a problem with my HDMI connection on my TV.  It appears to be a communication issue between the blu-ray player and the TV. I have been meaning to buy a second blu-ray player anyway, so I purchased a Sony BDP-S5500, thinking that might resolve the issue.  But the exact same thing happens when I plug it into my Sony TV.  That blu-ray player also works fine with the newer Vizio TV.
     I spent several additional hours with Sony support making sure there wasn't an issue with the new Blu-ray player.  This included about an hour of hold time, and being forwarded to over 4 different support staff, including an "escalated" forward to a "Level 5" support staff.  I had to repeat the issue several times to the staff, including Yeng (Employee #C8WZ), Charlie (Employee #C75Y), and Mel (Employee #C822).  The first staff I spoke with - Eric - told me he'd call back the next day after checking compatibility issues.  Neither he, nor any other Sony staff, called back after 2 days, so I called support again - they had no record of my conversation with Eric, and I had to start the whole process over again.  The Sony phone support so far has been very disappointing, to say the least. Any help would be appreciated.  I'm guessing that by plugging in the USB with the folder structure, it somehow triggered a setting on the older BDP-S780 blu-ray player to use an updated setting - a setting that is common with the software on the newer blu-ray player.  Has anyone else had a similar issue with one of the FD Trinitron WEGA tvs?  Thanks for your help.

    Your older TV is not capable of displaying either 1080P or any progressive program at tthat. On a standard definition (SD) non-progressive CRT like yours, blu-ray is a complete waste. Even if it could accept the signal, it wouldn't look any better.
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • I have a 2008 iMac 21.5" 10.6.8 Snow Leopard with 4.1.3 VMWare and windows 7.Mountain Lion initially refused to down load as I had back up on the HD. this was removed and installation was accepted but froze in the initial stages with 33 mins to go.

    I have a 2008 iMac 21.5" using 10.6.8 Snow Leopard with VM Ware 4.1.3 supporting Windows 7. Initially ML OSX refused to install due to Back up on HD which I removed to trash.It then proceeded but froze up in the initial stages with 33 mins remaining. I was lucky enough to quit and restart using 10.6.8. With all the problems on this chat line, it appears it may be best to leave Mountain Lion well alone, and cut losses rather than tempt fate.Has anybody anything positive to say or help with?

    Welcome to Apple Communities
    1. Open Disk Utility and repair permissions
    2. Open Finder, go to your user's folder > Library > Caches and delete everything
    3. Verify disk
    4. See if your apps are compatible with OS X 10.8 > http://www.roaringapps.com
    You can also do a backup and create a DVD or USB drive to install OS X > http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/ When you start in 10.8 installer, open Disk Utility, select your volume and erase the drive, and install

  • What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

    What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

    Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
    However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
    Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
    Are you using the track freeze option to manage the track count and subsequent demands on your machine?

  • Unable to delete photos from  my desktop , I get a drop down box with continued blue/ white bars - now 6 hours

    Having dragged 8 photos onto my desktop from iphoto  for the purpose of easy addition to an email , I now find that when I  dragged them to the Trash bin , they fail to delete.
    I get a drop down box with continued blue/ white bars , stating "moving to trash " .
    It's now  6 hours and I cannot stop either. Tried to shut down my computer and reboot but it won't let me . I tried  turning the power off , but the problem remains .
    Any help would be welcome.

    Hey ! 
    I have found the solution myself  !!!
    Go ..... Apple in the toolbar - Force quite - select finder - then relaunch .
    Brilliant

  • A box with a blue outline appeared in my bookmark drop-down menu. I can't get rid of it, and it obstructs the view of the bookmarks as I scroll up or down. Help!

    I was trying to bookmark a page, using the "Choose" menu in the bookmarks. I must have touched a key by accident, and a box with a blue outline & the name of one of my folders appeared in my bookmark drop-down menu. At first the box contained the folder name, then I was trying to delete the box, and erase the name, thinking it might get rid of the box, but it didn't. I can't get rid of this box! It obstructs the view of what is underneath. It stays in the same position as I scroll up & down in the drop-down menu, and it hides what is underneath. Please help me get rid of this box. It is driving me crazy! Thanks!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Upgraded to ios6 on my iphone 3gs and email is not displaying images. It has a blue box with a blue question mark inside

    I just upgraded to ios 6 on my iphone 3gs and I noticed on a couple of incoming emails that the images and information are not being displayed. There is a blue square box with a blue question mark inside. I already tried to press the home key and power key to restart. The email still does not display correctly. I went on my laptop to retrieve that same email and I was able to see the graphics and information, so the problem is on the iphone. I received two emails like this, so I'm missing all the important information. I also tried to retrieve my email through the internet browser and I still have the same problem. Any suggestions? Thanks!

    I forgot to mention that I have an Ipad 2 also and I can view the email information on there also. I received an email from Party city and it said to click here to print out the coupon. So I click the coupon and there is the little blue box with the question mark. This is the first time I've seen this happen, as I have printed out the coupons before. Maybe it has to do with the IOS6 update, because this just started to happen right after the update.

  • I dropped my iphone 4s and the screen is black with some blue lines.  IS there a way to view my text messages on the computer?

    I dropped my iphone 4s and the screen is black with some blue lines.  IS there a way to view my text messages on the computer? 

    For instance, DigiDNA's DiskAid will let you extract your messages from the phone in human-readable format. Like .pdf.

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

  • My iphone will no longer pair with my blue ant st3 bluetooth

    We just upgraded an ipone 3 to an iphone5 and it will not pair with our blueant st3 bluetooth. My iphone4 is paired with my other blueant st3 and works fine. If I go into settings on my iphone4 and selett bluetooth it tells me the device is not compatiable and asks if i want to forget the device, after I reboot the iphone4, all is well. My iphone4 is running V6.0.1 and the iphone5 is running V6.1. Any suggestions?

    Mark your above reply as Solved so that others searching for this issue will find the Solution.
    Cheers.

  • My screen dims and shrinks with a blue outline around the window.  It won't let me do anything unless it goes back to normal, but it won't stay that way for long.  What is wrong and how do I fix it?

    When I start up my screen will rapidly shrink to a smaller size with a blue border around the window.  It rapidly goes from full screen to this smaller screen with the blue border and back again.  It seems to be affected by the use of the mouse.  My mouse was old so I bought a new one....didn't help.  When I have to tabs or two applications open they seperate, shrink, and appear simultaniously on the screen.  This just started happening.

    Put in the correct password.
    http://iforgot.apple.com or http://appleid.apple.com

  • Over some images my imac cursor has changed to a hand with a blue magnifying grid - how to I get back to normal?

    Sometimes when moving over an image, mt cursor changes to a hand with a blue magnifying grid. How can I disable this?
    Thanks!

    Thanks sberman ... unfortunately that option is & has been unticked. It has happened to me two or three times but my memory ain't what it used to be so I can't recall the exact circumstances. It went away by itself this morning after an overnight shutdown so I don't think it can be a "preferences" item. Only thing I had to do this morning was to change trackpad batteries. Maybe low batt power was the cause? Interestingly before I posted the query here, I was searching all over the net for a similar problem and could not find even one related post or comment anywhere. And this post has 53 views with only your reply so maybe it is a spurious / unique problem? I'll leave the post for now as the problem seemed to have fixed itself and if it happens again, I will re-try everything first, including checking batteries. Somehow I thought mnaybe I had hit a keyboard shortcut in error but I can't find any reference at all to this kind of behaviour. Wierd!! But thanks very much for your reply!!

  • Why when I try to download new apps does a blue circle with a blue square inside it come up and then it just says waiting and never downloads?

    I've been having this problem for a while, and I have no idea how to sort it out. It won't let me download or upadate and apps at all and when I press download it comes up with this blue circle and the app just says waiting when I look at the icon... Someone help me it's really stating to bug me now and I need it sorting out.the circle in question is above the ''related'' option on the page.

    You can't keep changing the ID you use with iTunes, you are limited to once every 90 days.

  • Trouble installing Creative Cloud Desktop. After running the installer  the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. New member here, thanks for the time.

    After running the installer  the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result.  New member here, thanks for the time.

    Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.

Maybe you are looking for