PRKC-1044 error which installing 2 node RAC
Hi All,
OS:OEL5
Database Version:10201_database_linux32
cluster ware:10201_clusterware_linux32
I am getting the following error when i try to install oracle clusterware using OUI.
PRKC-1044:failed to check remote command execution setup for node using shells /usr/bin/ssh and /usr/bin/rsh
I loaded SSH keys into the memory using the below commands
$ exec /usr/bin/ssh-agent $SHELL
$ /usr/bin/ssh-add
If i run
$ssh rac1 date and $ssh rac2 date ia m getting desired result with out supplying the password.
Even i run the runcluvfy.sh utility and the report displays nothing is failed on both the nodes which is a green signal to proceed for clusterware installation.
can any one help me to resolve this error?
Note:I am installing it on VMware server2.0
Thank You All
SM,
Have you verified if the SSH automatic connection between (referred below) nodes works WITHOUT prompting for a password?
Configuring SSH
[http://chandradba.blogspot.com/2007/09/configuring-ssh.html]
SSH: Automatic Configuration
[http://www.fadalti.com/OS/ssh%20-%20Automatic%20Connection.htm]
Similar Messages
-
PRKC-1044 Error When Installing Clusterware
Hi Friends,
This is my first time to install clusterware.
I already met the pre-requisites .
But when I run the installer, and add rdbms1 and rdbms2 nodes, I hit the following errors:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 114998 MB Passed
Checking swap space: must be greater than 150 MB. Actual 8191 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-08-09_04-03-41PM. Please wait ...[oraprod1@rdbms1 ~]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Caught Cluster ExceptionPRKC-1044 : Failed to check remote command execution setup for node rdbms1.titanic.gov.ph using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refused
[PRKC-1044 : Failed to check remote command execution setup for node rdbms1.titanic.gov.ph using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refused]]
messageThe specified nodes are not clusterable.
The following error was returned by the operating system:
PRKC-1044 : Failed to check remote command execution setup for node rdbms1 using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refusedHow do I resolve this please....
Thanks a lot,
Ms KThanks :)
I got this
[root@rdbms1 ~]# cd /11g_CD/
[root@rdbms1 11g_CD]# ls
doc install README response rpm runcluvfy.sh runInstaller source stage upgrade welcome.html
[root@rdbms1 11g_CD]# ./runcluvfy.sh stage -pre crsinst -n rdbms1,rdbms2
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rdbms1".
Checking user equivalence...
User equivalence check passed for user "root".
Checking administrative privileges...
User existence check passed for "root".
Group existence check passed for "oinstall".
Membership check for user "root" in group "oinstall" [as Primary] failed.
Check failed on nodes:
rdbms2,rdbms1
Administrative privileges check failed.
Checking node connectivity...
Node connectivity check passed for subnet "192.168.10.0" with node(s) rdbms2,rdbms1.
Node connectivity check passed for subnet "192.168.254.0" with node(s) rdbms2,rdbms1.
Interfaces found on subnet "192.168.10.0" that are likely candidates for a private interconnect:
rdbms2 eth0:192.168.10.212
rdbms1 eth0:192.168.10.211
Interfaces found on subnet "192.168.254.0" that are likely candidates for a private interconnect:
rdbms2 eth1:192.168.254.212
rdbms1 eth1:192.168.254.211
WARNING:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check passed.
Checking system requirements for 'crs'...
Total memory check passed.
Free disk space check passed.
Swap space check passed.
System architecture check passed.
Kernel version check passed.
Package existence check passed for "make-3.81".
Package existence check passed for "binutils-2.17.50.0.6".
Package existence check passed for "gcc-4.1.1".
Package existence check passed for "libaio-0.3.106".
Package existence check passed for "libaio-0.3.106".
Package existence check passed for "libaio-devel-0.3.106".
Package existence check passed for "libstdc++-4.1.1".
Package existence check passed for "libstdc++-4.1.1".
Package existence check passed for "elfutils-libelf-devel-0.125".
Package existence check passed for "sysstat-7.0.0".
Package existence check passed for "compat-libstdc++-33-3.2.3".
Package existence check passed for "compat-libstdc++-33-3.2.3".
Package existence check passed for "libgcc-4.1.1".
Package existence check passed for "libgcc-4.1.1".
Package existence check passed for "libstdc++-devel-4.1.1".
Package existence check passed for "elfutils-libelf-0.125".
Package existence check failed for "glibc-2.5-12".
Check failed on nodes:
rdbms2,rdbms1
Package existence check passed for "glibc-2.5-12".
Package existence check passed for "glibc-common-2.5".
Package existence check passed for "glibc-devel-2.5".
Package existence check passed for "glibc-devel-2.5".
Package existence check passed for "gcc-c++-4.1.1".
Group existence check passed for "dba".
Group existence check passed for "oinstall".
User existence check passed for "nobody".
System requirement failed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes. I see some failed check but sometimes they are optional :D
Which one is mandatory please...
Thanks -
PRKC-1044 - During Clusterware Install
Hi,
I am installing Oracle Clusterware 10.2.0.1, on a two nodes cluster.
I am using RedHat 4, Kernel 2.6.9-34EL, ASMLib 2, no OCFS installed.
ssh is working, no password is required to ssh between the nodes. I am also running the ssh-agent and add commands on the OUI session,
In the cluster configuration screen on the OUI, I get the following errors:
PRKC-1044 - FAILED TO CHECK REMOTE COMMAND EXECUTION...
Seems like something related to ssh or rsh. rsh is not configured on the cluster.
Any thoughts what can cause this error?
Thanks In advance,
Idan.After you set the dsa and rsa keys in to the authorized_keys file.
From NODE 1
ssh node1 date
ssh node2 date
ssh node1.domain.com date
ssh node2.domain.com date
ssh node1-priv date
ssh node2-priv date
ssh node1-priv.doamin.com date
ssh node2-priv.domain.com date
From NODE 2
ssh node1 date
ssh node2 date
ssh node1.domain.com date
ssh node2.domain.com date
ssh node1-priv date
ssh node2-priv date
ssh node1-priv.doamin.com date
ssh node2-priv.domain.com date
This may resolve ur issue. -
NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC
Dear Friends,
I have installed oracle 11gr2 clusterware software in two node RAC. While i run the CLUVFY.SH, It shows error in NTP configuration.
1)I add "-x" parameter in "/etc/sysconfig/ntp" configuration file. and start the ntpd service and run the cluvfy.sh . then i got the below error.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 no
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
=============================================================================================
2)Down the ntpd service in both nodes and run the CLUVFY.SH.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 yes
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
==========================================================================
3)Based on some website advice, I down the ntpd service and move the "/etc/ntpd.conf" to another location.Then i got the below error.
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
ERROR:
PRVF-5402 : Warning: Could not find NTP configuration file "/etc/ntp.conf" on node "rac2"
PRVF-5405 : The NTP configuration file "/etc/ntp.conf" does not exist on all nodes
rac2
PRVF-5414 : Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
=============================================================
What should i do to solve this issue?? Please help me ...Hi,
I start the ntpd start the service in both node and done the CLUVFY.SH.
The output is below,
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
========================================================================================
[oracle@rac1 ~]$ /u01/app/grid/oracle/product/10.2.0/db_1/bin/cluvfy comp clocksync
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@rac1 ~]$
================================================================================
I hope the problem solved. Am i correct?? -
Error while installing Clusterware for RAC Oracle 10gR2?
Hi ,
I am installing clusterware 10.2.0.1 on Windows XP Service Pack 3.While installing i got the below errors.
Checking operating system requirements ...
Expected result: One of 5.0,5.2
Actual Result: 5.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows XP Version 5.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
How can i overcome this problem? Can anybody helpme.
Thanks
RajeshWhich edition of Windows XP are you running? Home edition is not supported for Oracle products.
-
PRKC-1044 while installing Clusterware
Hi
i am installing Oracle Clusterware(10.2.0.1.0) on Solaris 10
and i am getting the above mentioned error PRKC-1044 - During Clusterware Install .
for that i have checked the SSH configuration and from both Parivate and public IP in can able to login without prompting for password .And i have created a Link file also for /usr/bin/ssh /usr/local/bin/ssh
when i run CVU it says that no user equliance ...
do we need any patch for cluster or i have install any OS cluster software for this issue...1. when i run CVU it says that no user equliance ...
As per the above looks like the OS user on all nodes don't have same id's ?
Can you check if the id is same on all nodes.
2. Before you start installation check if ssh is working fine or not.
$ssh <nodename> date -
Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?
Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R -
Error in installing Oracle Software while adding node in RAC
Hi All
Oracle Version: 11.1.0.6.0
Linux
In the RAC environment, I am in the process of adding a node to the existing rac environment.
I have succssfully installed cluster software in the new node. all gsd, ons and vip services are running perfectly for new node in the existing and new nodes.
Next step, I started installing oracle software by executing the script $ORACLE_HOME/oui/bin/addNode.sh.
Here after specifying the the new node information (public host, private host and vip details) and when I pressed next,
OUI is giving following error - "Error occured while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured".
I ran olsnodes -n, it is giving proper node number.
Can somebody help me in identifying the problem and solution.
ThanksI am hitting the same issue, my problem was when I added the new node initially it fails because of the hint8-priv1. I followed the link below to remove and cleanup the last install. olsnode show only my existing nodes NOT including the new node.
http://download-west.oracle.com/docs/cd/B12037_01/rac.101/b10765/adddel.htm
then I ran
./addNode.sh -silent CLUSTER_NEW_NODES={hint-8} CLUSTER_NEW_PRIVATE_NODE_NAMES={hint8-priv1} CLUSTER_NEW_VIRTUAL_HOSTNAMES={hint8-vip}
I am getting this when use command line:
Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
SEVERE:Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
also run addNode.sh via GUI, the new node name still listed and can't continue.
BTW, adding new node should support online, shutdown is not required -
Error - convert single node-RAC-ConvertTomydb.xml -
my single node init.ora file:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=mydb
# Diagnostics and Statistics
background_dump_dest=/u01/app/oracle/admin/mydb/bdump
core_dump_dest=/u01/app/oracle/admin/mydb/cdump
user_dump_dest=/u01/app/oracle/admin/mydb/udump
# File Configuration
control_files=("/u01/app/oracle/oradata/mydb/control01.ctl", "/u01/app/oracle/oradata/mydb/control02.ctl", "/u01/app/oracle/oradata/mydb/control03.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.2.0.1.0
# Processes and Sessions
processes=150
# SGA Memory
sga_target=1083179008
# Security and Auditing
audit_file_dest=/u01/app/oracle/admin/mydb/adump
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=mydbXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=360710144
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
my ConvertTomydb.xml ------------which is copy of ConvertToRAC.xml file
<?xml version="1.0" encoding="UTF-8" ?>
- <n:RConfig xmlns:n="http://www.oracle.com/rconfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/rconfig">
- <n:ConvertToRAC>
- <!-- Verify does a precheck to ensure all pre-requisites are met, before the conversion is attempted. Allowable values are: YES|NO|ONLY
-->
- <n:Convert verify="ONLY">
- <!-- Specify current OracleHome of non-rac database for SourceDBHome
-->
<n:SourceDBHome>/u01/app/oracle/product/10.2.0/db_1</n:SourceDBHome>
- <!-- Specify OracleHome where the rac database should be configured. It can be same as SourceDBHome
-->
<n:TargetDBHome>/u01/app/oracle/product/10.2.0/db_1</n:TargetDBHome>
- <!-- Specify SID of non-rac database and credential. User with sysdba role is required to perform conversion
-->
- <n:SourceDBInfo SID="mydb">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:SourceDBInfo>
- <!-- ASMInfo element is required only if the current non-rac database uses ASM Storage
-->
- <n:ASMInfo SID="+ASM1">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:ASMInfo>
- <!-- Specify the list of nodes that should have rac instances running. LocalNode should be the first node in this nodelist.
-->
- <n:NodeList>
<n:Node name="linux1" />
<n:Node name="linux2" />
</n:NodeList>
- <!-- Specify prefix for rac instances. It can be same as the instance name for non-rac database or different. The instance number will be attached to this prefix.
-->
<n:InstancePrefix>mydb</n:InstancePrefix>
- <!-- Specify port for the listener to be configured for rac database.If port="", alistener existing on localhost will be used for rac database.The listener will be extended to all nodes in the nodelist
-->
<n:Listener port="1521" />
- <!-- Specify the type of storage to be used by rac database. Allowable values are CFS|ASM. The non-rac database should have same storage type.
-->
- <n:SharedStorage type="ASM">
- <!-- Specify Database Area Location to be configured for rac database.If this field is left empty, current storage will be used for rac database. For CFS, this field will have directory path.
-->
<n:TargetDatabaseArea>+ORCL_DATA1</n:TargetDatabaseArea>
- <!-- Specify Flash Recovery Area to be configured for rac database. If this field is left empty, current recovery area of non-rac database will be configured for rac database. If current database is not using recovery Area, the resulting rac database will not have a recovery area.
-->
<n:TargetFlashRecoveryArea>+FLASH_RECOVERY_AREA</n:TargetFlashRecoveryArea>
</n:SharedStorage>
</n:Convert>
</n:ConvertToRAC>
</n:RConfig>
Ran the xml file
$ rconfig ConvertTomydb.xml
Got this below error.
[oracle@linux1 bin]$ sh rconfig ConvertTomydb.xml
<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
[oracle@linux1 bin]$
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/rconfig.log
[main] [0:14:4:4] [RuntimeExec.runCommand:175] Returning from RunTimeExec.runCommand
oracle.ops.mgmt.cluster.RemoteShellException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
at oracle.ops.mgmt.nativesystem.UnixSystem.checkRemoteExecutionSetup(UnixSystem.java:1880)
at oracle.ops.mgmt.nativesystem.UnixSystem.getRemoteShellCmd(UnixSystem.java:1634)
at oracle.ops.mgmt.nativesystem.UnixSystem.createCommand(UnixSystem.java:614)
at oracle.ops.mgmt.nativesystem.UnixSystem.removeFile(UnixSystem.java:622)
at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1352)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:4:16] [UnixSystem.isSharedPath:1356] UnixSystem.isShared: creating file /u01/app/oracle/product/10.2.0/db_1/CFSFileName126249561289258204.tmp
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1817] checkRemoteExecutionSetup:: Checking user equivalence using Secured Shell '/usr/bin/ssh'
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1819] checkRemoteExecutionSetup:: Running Unix command: /usr/bin/ssh -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -o NumberOfPasswordPrompts=0 linux2 /bin/true
oracle.ops.mgmt.cluster.SharedDeviceException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
at oracle.ops.mgmt.nativesystem.UnixSystem.testCFSFile(UnixSystem.java:1444)
at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1402)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:35:152] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:152] [UnixSystem.getCSSConfigType:1985] configFile=/etc/oracle/ocr.loc
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrconfig_loc props.val=/u02/oradata/orcl/OCRFile propValue=/u02/oradata/orcl/OCRFile
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrmirrorconfig_loc props.val=/u02/oradata/orcl/OCRFile_mirror propValue=/u02/oradata/orcl/OCRFile_mirror
[main] [0:14:35:157] [Utils.getPropertyValue:292] propName=local_only propValue=FALSE
[main] [0:14:35:157] [UnixSystem.getCSSConfigType:2029] configType=false
[main] [0:14:35:158] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:168] [OCRTree.init:201] calling OCRTree.init
[main] [0:14:35:169] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:177] [OCRTree.<init>:157] calling OCR.init at level 7
[main] [0:14:35:177] [HASContext.getInstance:190] Module init : 24
[main] [0:14:35:177] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:177] [HASContext.getInstance:249] HAS Context Allocated: 4 to oracle.ops.mgmt.has.ClusterLock@f47bf5
[main] [0:14:35:177] [ClusterLock.<init>:60] ClusterLock Instance created.
[main] [0:14:35:178] [OCR.getKeyValue:411] OCR.getKeyValue(SYSTEM.local_only)
[main] [0:14:35:178] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 6
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: value is [false] dtype = 3
[main] [0:14:35:179] [OCRTreeHA.getLocalOnlyKeyValue:1697] OCRTreeHA localOnly string = false
[main] [0:14:35:180] [HASContext.getInstance:190] Module init : 6
[main] [0:14:35:180] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:180] [HASContext.getInstance:249] HAS Context Allocated: 5 to oracle.ops.mgmt.has.Util@f6438d
[main] [0:14:35:180] [Util.<init>:86] Util Instance created.
[main] [0:14:35:180] [has.UtilNative.Native] prsr_trace: Native: hasHAPrivilege
[main] [0:14:35:184] [HASContext.getInstance:190] Module init : 56
[main] [0:14:35:184] [HASContext.getInstance:214] Local Module init : 32
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: allocHASContext
[main] [0:14:35:184] [has.HASContextNative.Native]
allocHASContext: Came in
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: prsr_initCLSR
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: CLSR context [1]
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: retval [1]
[main] [0:14:35:185] [HASContext.getInstance:249] HAS Context Allocated: 6 to oracle.ops.mgmt.has.ClusterAlias@18825b3
[main] [0:14:35:185] [ClusterAlias.<init>:85] ClusterAlias Instance created.
[main] [0:14:35:185] [has.UtilNative.Native] prsr_trace: Native: getCRSHome
[main] [0:14:35:186] [has.UtilNative.Native] prsr_trace: Native: getCRSHome crs_home=/u01/app/oracle/product/10.2.0/crs(**)
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1328] DATABASE.ASM.linux1.+asm1 does exist
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1329] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:280] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:281] [OCR.getKeyValue:411] OCR.getKeyValue(DATABASE.ASM.linux1.+asm1.ORACLE_HOME)
[main] [0:14:35:281] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 36
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: value is [u01/app/oracle/product/10.2.0/db_1] dtype = 3
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1346] getASMInstanceOracleHome:ohome=/u01/app/oracle/product/10.2.0/db_1
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1367] Releasing shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:282] [has.ClusterLockNative.Native] prsr_trace: Native: unlock
[main] [0:14:35:802] [nativesystem.OCRNative.Native] keyExists: procr_close_key retval = 0
[main] [0:14:35:802] [ASMTree.getNodes:1236] DATABASE.ASM does exist
[main] [0:14:35:802] [ASMTree.getNodes:1237] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM
[main] [0:14:35:802] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:803] [OCR.listSubKeys:615] OCR.listSubKeys(DATABASE.ASM)
[main] [0:14:35:803] [nativesystem.OCRNative.Native] listSubKeys: key_name=[DATABASE.ASM]
[main] [0:14:35:809] [GetASMNodeListOperation.run:78] Got nodes=[Ljava.lang.String;@11a75a2
[main] [0:14:35:809] [GetASMNodeListOperation.run:91] result status 0
[main] [0:14:35:809] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[main] [0:14:35:810] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:858] [ASMInstance.setBestDiskGroup:1422] sql to be executed:=select name from v$asm_diskgroup where free_mb= (select max(free_mb) from v$asm_diskgroup)
[main] [0:14:35:864] [ASMInstance.setBestDiskGroup:1426] Setting best diskgroup....
[main] [0:14:35:888] [SQLEngine.doSQLSubstitution:2165] The substituted sql statement:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:888] [ASMInstance.setTemplates:1345] sql to be executed:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:892] [ASMInstance.setTemplates:1349] Getting templates for diskgroup: oracle.sysman.assistants.util.asm.DiskGroup@170888e
[main] [0:14:35:892] [ASMInstance.setTemplates:1357] template: PARAMETERFILE
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DUMPSET
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DATAGUARDCONFIG
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: FLASHBACK
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: CHANGETRACKING
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: XTRANSPORT
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: AUTOBACKUP
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: BACKUPSET
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: TEMPFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: DATAFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ONLINELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ARCHIVELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: CONTROLFILE
[main] [0:14:35:894] [ASMInstance.createUtilASMInstanceRAC:113] Diskgroups loaded
[main] [0:14:35:894] [LocalNodeCheck.checkLocalNode:107] Performing LocalNodeCheck
[main] [0:14:35:894] [OracleHome.getNodeNames:270] inside getNodeNames
[main] [0:14:36:116] [OracleHome.isClusterInstalled:252] bClusterInstalled=false
[main] [0:14:36:120] [Step.execute:251] STEP Result=Clusterware is not configured
[main] [0:14:36:121] [Step.execute:280] Returning result:Operation Failed
[main] [0:14:36:121] [RConfigEngine.execute:67] bAsyncJob=false
[main] [0:14:36:124] [RConfigEngine.execute:76] Result=<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/mydb/sqllog
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database FALSE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database FALSE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
Please help me where I am making mistake.
Thanks1) I have created single node standard database called mydb in /u01/app/oracle/product/10.2.0/db_1 home (hostname linux1)
2) installed crs and asm on linux1 and linux2 and shared storag on ASM(which external HD running ieee1294 cards and ports) . no database is created on linux1 or linux2
3) I want to convert mydb to RAC DATABASE called mydb1 instance on linux1 and mydb2 on linux2 machine respectively.
4) copied and modifed xml as you see above called ConvertTomydb.xml to $ORACLE_HOME/bin directory
5) when I run
$rconfig ConvertTomydb.xml from $ORACLE_HOME/bin directory , i get the following error
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC>
$
Please see my crs_stat -t command output
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE linux1
ora....X1.lsnr application ONLINE ONLINE linux1
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora....SM2.asm application ONLINE ONLINE linux2
ora....X2.lsnr application ONLINE ONLINE linux2
ora.linux2.gsd application ONLINE ONLINE linux2
ora.linux2.ons application ONLINE ONLINE linux2
ora.linux2.vip application ONLINE ONLINE linux2
ora.orcl.db application ONLINE ONLINE linux1
ora....l1.inst application ONLINE ONLINE linux1
ora....l2.inst application ONLINE ONLINE linux2
ora....test.cs application ONLINE ONLINE linux1
ora....cl1.srv application ONLINE ONLINE linux1
ora....cl2.srv application ONLINE UNKNOWN linux2
please see the output from olsnodes command
[oracle@linux1 bin]$ olsnodes
linux1
linux2
[oracle@linux1 bin]$
What is your cache fusion interconnect strategy?
I don't about this, please let me know where can i find the answers. what kind of command do i have to use get the answer
damorgan , Please let me know, if I gave answers to your questions. if not please let me know, i can give as much as possible. i really appreciate for your help
Thanks -
Error when installing RAC on windows 2000
Hi,
I'm installing Oracle 9i(9.0.1.1.1 EE) RAC for the first time. It has been an interesting experience,
with many bumps in the road. But now I'm stuck.
I have installed the 9i EE software, but when I try to create a database ( using DBCA), I get an error :
PRKR-1005 : adding of cluster database cludb configuration failed, PRKC-1018 : Error getting coordinator node
The error occurs after I have finished configurating, and the actual database creation starts.
I did get another error earlier : PRKR-1028 "raw device \\.\srvcfg is invalid, [HINT: initialize raw device by using
'srvconfig' tool]
That error disappeared after running srvconfig -init.
I have restarted the Oracle GSD services on both machines, but I still get the same error.
The OS is Windows 2000 Advanced Server, running on a Compaq Cluster.
Br,
StefanFor more information about it:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez -
Install mulutple RAC databases on 2-node RAC cluster
I am installing 5 RAC databases on a 2-node RAC cluster. I have setup SCAN using 3 IP addresses.
Do I have to use SCAN listener for all databases?
When installing the 3 database, I get ORA-12537: TNS connection closed error.
ENV: 11gR2 2-node RH5.x
Thanks!I have setup SCAN using 3 IP addresses.
Do I have to use SCAN listener for all databases?These 3 scan ip will work for youe all database running under this cluster setup.
you may also use VIP to make connection like 10g.
I get ORA-12537: TNS connection closed error.Appear some connectivity/configuration isue,please try MOS doc contain detail on this.
How to Troubleshoot Connectivity Issue with 11gR2 SCAN Name [ID 975457.1] -
Hi all,
i have an error while installing 10g in laptop which has already have 9i on it.
10g version was 10.2.0.3, i know it will not support in xp, but in other system which has xp it was working fine.
System details,
1GB Ram,Win XP Laptop.
Oracle 9i already installed.
when i clicked on 10.2.0.3 setup.exe i get OUI.exe has encountered a problem and needs to close.
that same oracle setup file is working fine in other win xp system, but in this laptop system it is not starting itself, beginning only i will give error as mentioned above.
software is present in c:\a\b\c\d\e folder, i shared only e folder and in other system i opened that file it is successfully opening. i don't know why it is not opening in this laptop.what may be the problem. what i should do to resolve this issue.
Please help me out,
Regards,
veeresh shi,
thanks for replying, actually that software has included with demantra product, that same 10.2.0.3 will work in other systems which as XP, i like to tell 1 thing,
that software is present inside many folders like c:\a...\b....\c....\d....\e.... in this folder the software is present, is this could be the issue.
i shared only e.... folder and from other system when i click on setup.exe the OUI will open only in this laptop it is not opening.
please suggest me
Regards,
veeresh.s -
Exchange Passive Node Failover - Getting An Error While Installing Mailbox Role in Passive Node
Hello,
I was having Exchange 2007 CCR in Two Nodes, Due to hardware fail my passive node is crash. Now i want to recover my passive node i follow this steps
http://www.msexchange.org/articles-tutorials/exchange-server-2007/high-availability-recovery/re-installing-cluster-nodes-exchange-2007-ccr-based-mailbox-server-setup-part2.html
Evict the Damaged Node from the Cluster
Install Windows Server 2003 on the replacement node
Use the same drive letters and folder structure for the database and log file drives
Install the same service packs & software updates as the cluster active node
Use a unique computer name
for the replacement node
Join the replacement node to the domain
Add the replacement node to the Cluster using Cluster Administrator
When im installing Passive node i'm getting an error when mailbox role is installing "Object refernce not set to an instance of an object"
Please Advise[1/6/2015 12:28:31 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[1/6/2015 12:28:31 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:28:31 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:28:31 PM] [2] Beginning processing.
[1/6/2015 12:28:31 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[1/6/2015 12:28:41 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
Compiling 3 assemblies:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll ...
Microsoft.Exchange.Rpc, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {A77F7B45-C91D-4B18-94DB-D563EB0D1F84}
Source HASH: 1c8367b62a1131417ed73fe3e751c3828b38a5a1
NGen GUID sign: {66199311-02ED-4287-D82B-3AB75FED547C}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\11931966ed028742d82b3ab75fed547c\Microsoft.Exchange.Rpc.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.VisualC, Version=8.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{1483EE61-9ACA-4942-AC0A-402784F7E1B9}
Sign:40be9432586208c4bb49866ff7ea31bc16665a6b
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll ...
Compiling assembly Microsoft.VisualC, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
Microsoft.VisualC, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Source MVID: {1483EE61-9ACA-4942-AC0A-402784F7E1B9}
Source HASH: 40be9432586208c4bb49866ff7ea31bc16665a6b
NGen GUID sign: {01CF6F39-E4D3-0686-274B-9F5584B1BA3D}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1">
<IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Flags="SkipVerification"/>
</PermissionSet>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.VisualC\396fcf01d3e48606274b9f5584b1ba3d\Microsoft.VisualC.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.VisualC, Version=8.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{1483EE61-9ACA-4942-AC0A-402784F7E1B9}
Sign:40be9432586208c4bb49866ff7ea31bc16665a6b
Finished compiling assembly Microsoft.VisualC, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
Compiling assembly System.Data.SqlXml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 ...
System.Data.SqlXml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Source MVID: {9F0BE212-39D8-4977-8C55-D2ADED637952}
Source HASH: b97802318037f8b266acd7d3f0e16e3a9fb92384
NGen GUID sign: {92C14596-C6E1-628A-572D-F352D8489683}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\System.Data.SqlXml\9645c192e1c68a62572df352d8489683\System.Data.SqlXml.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
System.Data.SqlXml, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{9F0BE212-39D8-4977-8C55-D2ADED637952}
Sign:b97802318037f8b266acd7d3f0e16e3a9fb92384
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
System.Xml, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{2B8AEF52-78D4-4F03-BA8B-F0B5272945C8}
Sign:218b87cdd9259fa6d554495522606b60250a72d6
Hardbound Guid:{D76087B7-4045-EE39-A98A-147340E84C24}
System.Configuration, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{933D8A04-B103-4B70-BE89-87F8F370AEC4}
Sign:f825e55c996a6136191e393eadffe07e2ed2b984
Finished compiling assembly System.Data.SqlXml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 ...
[1/6/2015 12:28:41 PM] [2] Process standard error:
[1/6/2015 12:28:41 PM] [2] Ending processing.
[1/6/2015 12:28:41 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:28:41 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:28:41 PM] [2] Beginning processing.
[1/6/2015 12:28:41 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[1/6/2015 12:28:41 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
Compiling 1 assembly:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll ...
Microsoft.Exchange.Common.IL, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {2C563679-AE56-41C7-8A80-8A0D965AFF9E}
Source HASH: 318bf726c3ec004b8db6dfa3ad02a4eae82b4890
NGen GUID sign: {DBE4EF23-FE16-7D26-5A96-72F3C43A5B66}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\23efe4db16fe267d5a9672f3c43a5b66\Microsoft.Exchange.Common.IL.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll ...
[1/6/2015 12:28:41 PM] [2] Process standard error:
[1/6/2015 12:28:41 PM] [2] Ending processing.
[1/6/2015 12:28:41 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:28:41 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:28:41 PM] [2] Beginning processing.
[1/6/2015 12:28:41 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[1/6/2015 12:29:01 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
Compiling 2 assemblies:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll ...
Microsoft.Exchange.Diagnostics, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {8CBFBD3F-1859-44DB-B85B-3DE8CA01DF33}
Source HASH: 1a70943ea983aa1742e98704ccbfb40bfef33c23
NGen GUID sign: {77300B68-787B-A1CA-3298-EFA73DB0406B}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\680b30777b78caa13298efa73db0406b\Microsoft.Exchange.Diagnostics.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.Exchange.Data.Common, Version=8.0.681.0, PublicKeyToken=31bf3856ad364e35:
Guid:{F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Sign:b8f148b173ec7d9e604f21424493a289b6e9873a
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
Microsoft.Exchange.Rpc, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{A77F7B45-C91D-4B18-94DB-D563EB0D1F84}
Sign:1c8367b62a1131417ed73fe3e751c3828b38a5a1
System.Configuration, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{933D8A04-B103-4B70-BE89-87F8F370AEC4}
Sign:f825e55c996a6136191e393eadffe07e2ed2b984
Microsoft.Exchange.Common.IL, Version=0.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{2C563679-AE56-41C7-8A80-8A0D965AFF9E}
Sign:318bf726c3ec004b8db6dfa3ad02a4eae82b4890
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll ...
Compiling assembly Microsoft.Exchange.Data.Common, Version=8.0.681.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 ...
Microsoft.Exchange.Data.Common, Version=8.0.681.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Source HASH: b8f148b173ec7d9e604f21424493a289b6e9873a
NGen GUID sign: {7A773BF5-FF43-09DF-08EF-86BA364EACF8}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\f53b777a43ffdf0908ef86ba364eacf8\Microsoft.Exchange.Data.Common.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.Exchange.Data.Common, Version=8.0.681.0, PublicKeyToken=31bf3856ad364e35:
Guid:{F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Sign:b8f148b173ec7d9e604f21424493a289b6e9873a
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
System.Configuration, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{933D8A04-B103-4B70-BE89-87F8F370AEC4}
Sign:f825e55c996a6136191e393eadffe07e2ed2b984
System.Xml, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{2B8AEF52-78D4-4F03-BA8B-F0B5272945C8}
Sign:218b87cdd9259fa6d554495522606b60250a72d6
Finished compiling assembly Microsoft.Exchange.Data.Common, Version=8.0.681.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 ...
[1/6/2015 12:29:01 PM] [2] Process standard error:
[1/6/2015 12:29:01 PM] [2] Ending processing.
[1/6/2015 12:29:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:29:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:29:01 PM] [2] Beginning processing.
[1/6/2015 12:29:01 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
[1/6/2015 12:29:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
Compiling 4 assemblies:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll ...
Microsoft.Exchange.Common, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {090DC806-FB68-4A89-A969-BD125452394C}
Source HASH: b982dcf50fe022b926a03529b85ca2e23a60d148
NGen GUID sign: {792B0253-E3BE-1EFA-9121-A58ACC443015}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\53022b79bee3fa1e9121a58acc443015\Microsoft.Exchange.Common.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.Exchange.Data.Common, Version=8.0.681.0, PublicKeyToken=31bf3856ad364e35:
Guid:{F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Sign:b8f148b173ec7d9e604f21424493a289b6e9873a
System.ServiceProcess, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{B5D02EE9-B8F4-493D-98DE-B99067CAF039}
Sign:346c2ee41e7e70d67ce4640726edd8203d3f276f
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
Microsoft.Exchange.Diagnostics, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{8CBFBD3F-1859-44DB-B85B-3DE8CA01DF33}
Sign:1a70943ea983aa1742e98704ccbfb40bfef33c23
Microsoft.Exchange.Common.IL, Version=0.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{2C563679-AE56-41C7-8A80-8A0D965AFF9E}
Sign:318bf726c3ec004b8db6dfa3ad02a4eae82b4890
System.Xml, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{2B8AEF52-78D4-4F03-BA8B-F0B5272945C8}
Sign:218b87cdd9259fa6d554495522606b60250a72d6
System.Configuration, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{933D8A04-B103-4B70-BE89-87F8F370AEC4}
Sign:f825e55c996a6136191e393eadffe07e2ed2b984
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll ...
Compiling assembly System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Source MVID: {B5D02EE9-B8F4-493D-98DE-B99067CAF039}
Source HASH: 346c2ee41e7e70d67ce4640726edd8203d3f276f
NGen GUID sign: {9B9F9598-687E-0C63-2CA3-B8EDA6232888}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\System.ServiceProce#\98959f9b7e68630c2ca3b8eda6232888\System.ServiceProcess.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
System.ServiceProcess, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{B5D02EE9-B8F4-493D-98DE-B99067CAF039}
Sign:346c2ee41e7e70d67ce4640726edd8203d3f276f
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
System.Configuration.Install, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{D5488AB9-12B4-4921-AA95-21DB22B1179F}
Sign:f4643c4fbc352b9201db4aed87752b52241d6f41
System.Windows.Forms, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{1FF9D862-38A6-4352-A1BC-17E1C0B67EC2}
Sign:7779b2d88e7f75ffc31828f7112e7066410162e8
System.Drawing, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{A3205C19-31D6-4357-9F8E-A9513306DEC7}
Sign:fb709be7704fcf1fd7055d39ebaf4388194d2889
Finished compiling assembly System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
Compiling assembly System.Configuration.Install, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
System.Configuration.Install, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Source MVID: {D5488AB9-12B4-4921-AA95-21DB22B1179F}
Source HASH: f4643c4fbc352b9201db4aed87752b52241d6f41
NGen GUID sign: {C503523D-FD52-F19C-05CB-4B7336D79A49}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\System.Configuratio#\3d5203c552fd9cf105cb4b7336d79a49\System.Configuration.Install.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
System.Configuration.Install, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{D5488AB9-12B4-4921-AA95-21DB22B1179F}
Sign:f4643c4fbc352b9201db4aed87752b52241d6f41
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
System.Runtime.Serialization.Formatters.Soap, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{13BC79E5-AB8A-48B6-B2CC-0854119DCBDA}
Sign:1014fd9f161aff328c98924d6088ae65aa3030d7
System.Windows.Forms, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{1FF9D862-38A6-4352-A1BC-17E1C0B67EC2}
Sign:7779b2d88e7f75ffc31828f7112e7066410162e8
Finished compiling assembly System.Configuration.Install, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
Compiling assembly System.Runtime.Serialization.Formatters.Soap, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
System.Runtime.Serialization.Formatters.Soap, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Source MVID: {13BC79E5-AB8A-48B6-B2CC-0854119DCBDA}
Source HASH: 1014fd9f161aff328c98924d6088ae65aa3030d7
NGen GUID sign: {34727167-AFF5-E848-9451-78BC72A62EC8}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\System.Runtime.Seri#\67717234f5af48e8945178bc72a62ec8\System.Runtime.Serialization.Formatters.Soap.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
System.Runtime.Serialization.Formatters.Soap, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{13BC79E5-AB8A-48B6-B2CC-0854119DCBDA}
Sign:1014fd9f161aff328c98924d6088ae65aa3030d7
System.Xml, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{2B8AEF52-78D4-4F03-BA8B-F0B5272945C8}
Sign:218b87cdd9259fa6d554495522606b60250a72d6
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Finished compiling assembly System.Runtime.Serialization.Formatters.Soap, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a ...
[1/6/2015 12:29:04 PM] [2] Process standard error:
[1/6/2015 12:29:04 PM] [2] Ending processing.
[1/6/2015 12:29:04 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:29:04 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:29:04 PM] [2] Beginning processing.
[1/6/2015 12:29:04 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
[1/6/2015 12:29:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
Compiling 1 assembly:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll ...
Microsoft.Exchange.Core.Strings, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {E671C74F-10AB-419E-8A0F-4C027B3981B5}
Source HASH: bef5663bd404d89f1c9e4e8df9e17b782e4ce766
NGen GUID sign: {C4BFD0BF-BC1A-FF4C-DACE-61165E6BEE7C}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\bfd0bfc41abc4cffdace61165e6bee7c\Microsoft.Exchange.Core.Strings.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
Microsoft.Exchange.Data.Common, Version=8.0.681.0, PublicKeyToken=31bf3856ad364e35:
Guid:{F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Sign:b8f148b173ec7d9e604f21424493a289b6e9873a
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll ...
[1/6/2015 12:29:04 PM] [2] Process standard error:
[1/6/2015 12:29:04 PM] [2] Ending processing.
[1/6/2015 12:29:04 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[1/6/2015 12:29:04 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[1/6/2015 12:29:04 PM] [2] Beginning processing.
[1/6/2015 12:29:04 PM] [2] Starting: C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
[1/6/2015 12:29:13 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.42
Copyright (C) Microsoft Corporation 1998-2002. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
Compiling 3 assemblies:
Compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll ...
Microsoft.Exchange.Net, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {9177A7BE-2ECC-40D4-B5FB-0C643A1130E4}
Source HASH: 2d34ca7cbaf2359fe068828351a1d8d30e21a536
NGen GUID sign: {BBAEC190-74C2-84D5-C4B9-F7BA04A86E4E}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
File: C:\WINDOWS\assembly\NativeImages_v2.0.50727_64\Microsoft.Exchange.#\90c1aebbc274d584c4b9f7ba04a86e4e\Microsoft.Exchange.Net.ni.dll
Dependencies:
mscorlib, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{F107DDB2-5499-4106-A503-4AA24B5E4A4F}
Sign:c2219dc660a826c6a3b4bc7e85de9105086db23d
Hardbound Guid:{687FCFEB-5108-AC0C-E27B-D065DA0AE3B9}
System, Version=2.0.0.0, PublicKeyToken=b77a5c561934e089:
Guid:{71EFBB87-F94E-4397-8D46-76BB8FF60448}
Sign:d464740812db1d60e65c51092d09f67028463192
Hardbound Guid:{D5F143E5-1AD8-CB94-12D2-3D4AFFC46E22}
Microsoft.Exchange.Data.Common, Version=8.0.681.0, PublicKeyToken=31bf3856ad364e35:
Guid:{F2CA7D1F-DA42-4E38-AF97-547F51FA377C}
Sign:b8f148b173ec7d9e604f21424493a289b6e9873a
Microsoft.Exchange.Common, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{090DC806-FB68-4A89-A969-BD125452394C}
Sign:b982dcf50fe022b926a03529b85ca2e23a60d148
System.ServiceProcess, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{B5D02EE9-B8F4-493D-98DE-B99067CAF039}
Sign:346c2ee41e7e70d67ce4640726edd8203d3f276f
Microsoft.Exchange.Diagnostics, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{8CBFBD3F-1859-44DB-B85B-3DE8CA01DF33}
Sign:1a70943ea983aa1742e98704ccbfb40bfef33c23
Interop.CertEnroll, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{0E330E86-15D9-46AE-A943-0160454E3570}
Sign:10641c56e63c1e3b9be7bfb997e948658dc1e2d1
System.DirectoryServices, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{E467B35C-E345-465C-8CCB-F6D3E2E81276}
Sign:ad9b0b1379315a2b0fc5d0367fa95cf9bd4681c9
Interop.XEnroll, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{678158A1-9581-44D6-BF1A-126EA654836E}
Sign:01a0beca7e00e08f1291a22cfe2830785bf7f0ab
System.Configuration, Version=2.0.0.0, PublicKeyToken=b03f5f7f11d50a3a:
Guid:{933D8A04-B103-4B70-BE89-87F8F370AEC4}
Sign:f825e55c996a6136191e393eadffe07e2ed2b984
Microsoft.Exchange.Core.Strings, Version=8.0.0.0, PublicKeyToken=31bf3856ad364e35:
Guid:{E671C74F-10AB-419E-8A0F-4C027B3981B5}
Sign:bef5663bd404d89f1c9e4e8df9e17b782e4ce766
Finished compiling assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll ...
Compiling assembly Interop.CertEnroll, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 ...
Interop.CertEnroll, Version=8.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Source MVID: {0E330E86-15D9-46AE-A943-0160454E3570}
Source HASH: 10641c56e63c1e3b9be7bfb997e948658dc1e2d1
NGen GUID sign: {671C04E0-0279-45A6-2B1C-22C0FA104F19}
OS: WinNT
Processor: amd64
Runtime: 2.0.50727.926
mscorwks.dll: TimeStamp=46D8E98C, CheckSum=009E1083
Flags:
Scenarios: <no debug info> <no debugger> <no profiler> <no instrumentation>
Granted set: <PermissionSet class="System.Security.PermissionSet"
version="1" -
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
-
Oracle Single Node RAC - Oralce Clusterware Install
Hi
I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
However - I do not want to use ASM in any of my set-up.
We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
Is this possible?
All the documents I have include reference to ASM
If I try and install Grid - I am also asked for ASM information.
I find ASM an un-necessary overhead given the storage we have and do want to use it,
Can anyone help?Hi,
no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
What you should use in conjunction with NFS however is dNFS.
Regards
Sebastian
Maybe you are looking for
-
Error while running a pro*c executable
Hi, i have a proc*c executable and i decided to schedule it in crontab, but when at the time of execution, it gives the following error, ld.so.1: cms2sap1: fatal: libclntsh.so.8.0: open failed: No such file or directory Killed iam on a solaris os, al
-
Unloading a movie clip from a for statement
Hi, I have this code: //create empty movie clips to place bin top, flame and bin bottom in that order this.createEmptyMovieClip("holder_mc2",this.getNextHighestDepth()); this.createEmptyMovieClip("holder_mc",this.getNextHighestDepth()); this.createEm
-
Intercompany Billing through the EDI
Hi Experts, I have configured the Intercompany Billing and it is working fine. But, I have to do it through EDI so that the Posting in the Delivering company is made automatically through EDI. I guess this can be done but I don't know the Steps of Co
-
CRM Sales Order Not getting transfer to ECC System
Hi, We had created one sale order in CRM and created sale order is not getting transfer to ECC system. BDOC are ending into error status and following are the error which is getting generated ERP adapter is called item is not to invoice0000000010 Ser
-
Hi - Word for Mac 2011 has been working fine. Yesterday suddenly couldn't edit into Powerpoint pptx from a PC (something I used to be be able to do). Got the latest update for Word for Mac 2011, so now running v. 14.4.1 on my iMac, which operates und