PRKC-1044 - During Clusterware Install

Hi,
I am installing Oracle Clusterware 10.2.0.1, on a two nodes cluster.
I am using RedHat 4, Kernel 2.6.9-34EL, ASMLib 2, no OCFS installed.
ssh is working, no password is required to ssh between the nodes. I am also running the ssh-agent and add commands on the OUI session,
In the cluster configuration screen on the OUI, I get the following errors:
PRKC-1044 - FAILED TO CHECK REMOTE COMMAND EXECUTION...
Seems like something related to ssh or rsh. rsh is not configured on the cluster.
Any thoughts what can cause this error?
Thanks In advance,
Idan.

After you set the dsa and rsa keys in to the authorized_keys file.
From NODE 1
ssh node1 date
ssh node2 date
ssh node1.domain.com date
ssh node2.domain.com date
ssh node1-priv date
ssh node2-priv date
ssh node1-priv.doamin.com date
ssh node2-priv.domain.com date
From NODE 2
ssh node1 date
ssh node2 date
ssh node1.domain.com date
ssh node2.domain.com date
ssh node1-priv date
ssh node2-priv date
ssh node1-priv.doamin.com date
ssh node2-priv.domain.com date
This may resolve ur issue.

Similar Messages

PRKC-1044 Error When Installing Clusterware

Hi Friends,
This is my first time to install clusterware.
I already met the pre-requisites .
But when I run the installer, and add rdbms1 and rdbms2 nodes, I hit the following errors:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB.   Actual 114998 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 8191 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 65536    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-08-09_04-03-41PM. Please wait ...[oraprod1@rdbms1 ~]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Caught Cluster ExceptionPRKC-1044 : Failed to check remote command execution setup for node rdbms1.titanic.gov.ph using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refused
[PRKC-1044 : Failed to check remote command execution setup for node rdbms1.titanic.gov.ph using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refused]]
messageThe specified nodes are not clusterable.
The following error was returned by the operating system:
PRKC-1044 : Failed to check remote command execution setup for node rdbms1 using shells /usr/bin/ssh and /usr/bin/rsh
rdbms1.titanic.gov.ph: Connection refusedHow do I resolve this please....
Thanks a lot,
Ms K

Thanks :)
I got this
[root@rdbms1 ~]# cd /11g_CD/
[root@rdbms1 11g_CD]# ls
doc install README response rpm runcluvfy.sh runInstaller source stage upgrade welcome.html
[root@rdbms1 11g_CD]# ./runcluvfy.sh stage -pre crsinst -n rdbms1,rdbms2
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rdbms1".
Checking user equivalence...
User equivalence check passed for user "root".
Checking administrative privileges...
User existence check passed for "root".
Group existence check passed for "oinstall".
Membership check for user "root" in group "oinstall" [as Primary] failed.
Check failed on nodes:
        rdbms2,rdbms1
Administrative privileges check failed.
Checking node connectivity...
Node connectivity check passed for subnet "192.168.10.0" with node(s) rdbms2,rdbms1.
Node connectivity check passed for subnet "192.168.254.0" with node(s) rdbms2,rdbms1.
Interfaces found on subnet "192.168.10.0" that are likely candidates for a private interconnect:
rdbms2 eth0:192.168.10.212
rdbms1 eth0:192.168.10.211
Interfaces found on subnet "192.168.254.0" that are likely candidates for a private interconnect:
rdbms2 eth1:192.168.254.212
rdbms1 eth1:192.168.254.211
WARNING:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check passed.
Checking system requirements for 'crs'...
Total memory check passed.
Free disk space check passed.
Swap space check passed.
System architecture check passed.
Kernel version check passed.
Package existence check passed for "make-3.81".
Package existence check passed for "binutils-2.17.50.0.6".
Package existence check passed for "gcc-4.1.1".
Package existence check passed for "libaio-0.3.106".
Package existence check passed for "libaio-0.3.106".
Package existence check passed for "libaio-devel-0.3.106".
Package existence check passed for "libstdc++-4.1.1".
Package existence check passed for "libstdc++-4.1.1".
Package existence check passed for "elfutils-libelf-devel-0.125".
Package existence check passed for "sysstat-7.0.0".
Package existence check passed for "compat-libstdc++-33-3.2.3".
Package existence check passed for "compat-libstdc++-33-3.2.3".
Package existence check passed for "libgcc-4.1.1".
Package existence check passed for "libgcc-4.1.1".
Package existence check passed for "libstdc++-devel-4.1.1".
Package existence check passed for "elfutils-libelf-0.125".
Package existence check failed for "glibc-2.5-12".
Check failed on nodes:
        rdbms2,rdbms1
Package existence check passed for "glibc-2.5-12".
Package existence check passed for "glibc-common-2.5".
Package existence check passed for "glibc-devel-2.5".
Package existence check passed for "glibc-devel-2.5".
Package existence check passed for "gcc-c++-4.1.1".
Group existence check passed for "dba".
Group existence check passed for "oinstall".
User existence check passed for "nobody".
System requirement failed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes. I see some failed check but sometimes they are optional :D
Which one is mandatory please...
Thanks

PRKC-1044 error which installing 2 node RAC

Hi All,
OS:OEL5
Database Version:10201_database_linux32
cluster ware:10201_clusterware_linux32
I am getting the following error when i try to install oracle clusterware using OUI.
PRKC-1044:failed to check remote command execution setup for node using shells /usr/bin/ssh and /usr/bin/rsh
I loaded SSH keys into the memory using the below commands
$ exec /usr/bin/ssh-agent $SHELL
$ /usr/bin/ssh-add
If i run
$ssh rac1 date and $ssh rac2 date ia m getting desired result with out supplying the password.
Even i run the runcluvfy.sh utility and the report displays nothing is failed on both the nodes which is a green signal to proceed for clusterware installation.
can any one help me to resolve this error?
Note:I am installing it on VMware server2.0
Thank You All

SM,
Have you verified if the SSH automatic connection between (referred below) nodes works WITHOUT prompting for a password?
Configuring SSH
[http://chandradba.blogspot.com/2007/09/configuring-ssh.html]
SSH: Automatic Configuration
[http://www.fadalti.com/OS/ssh%20-%20Automatic%20Connection.htm]

Running root.sh during clusterware install fails

Attempting to set up Clusterware/RAC for the first time. Running into a problem running root.sh after the clusterware installation.
I get the following output.
sh root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Failed to upgrade Oracle Cluster Registry configuration
Looking at the log for root.sh, I see the following.
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2008-05-27 13:35:22.424: [ OCRCONF][2538024640]ocrconfig starts...
2008-05-27 13:35:22.424: [ OCRCONF][2538024640]Upgrading OCR data
2008-05-27 13:35:22.426: [ OCRCONF][2538024640]OCR already in current version.
2008-05-27 13:35:22.429: [ OCRCONF][2538024640]Failed to call clsssinit (21)
2008-05-27 13:35:22.429: [ OCRCONF][2538024640]Failed to make a backup copy of OCR
2008-05-27 13:35:22.429: [ OCRCONF][2538024640]Exiting [status=failed]...
Any ideas on how to fix this?

Here is the output from running runcluvfy.sh stage -pre crsinst -n linuxdb1,linuxdb2 -verbove
I X'd out some ipaddresses. I have ran this previously before attempting to install the clusterware software, and all checks say 'passed', but at the bottom, it says it was unsuccessfull. I have been unable to determine was wrong from looking at this output.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "linuxdb1"
Destination Node Reachable?
linuxdb2 yes
linuxdb1 yes
Result: Node reachability check passed from node "linuxdb1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
linuxdb1 passed
linuxdb2 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
linuxdb1 yes passed
linuxdb2 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
linuxdb1 exists 505
linuxdb2 exists 505
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
linuxdb1 yes yes yes yes passed
linuxdb2 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "linuxdb1"
Interface Name IP Address Subnet
eth0 XXX.XXX.X.XX XXX.XXX.X.XX
eth1 192.168.3.49 192.168.3.0
Interface information for node "linuxdb2"
Interface Name IP Address Subnet
eth0 XXX.XXX.X.XX XXX.XXX.X.XX
eth1 192.168.3.81 192.168.3.0
Check: Node connectivity of subnet "XXX.XXX.X.XX"
Source Destination Connected?
linuxdb1:eth0 linuxdb2:eth0 yes
Result: Node connectivity check passed for subnet "XXX.XXX.X.XXX" with node(s) linuxdb1,linuxdb2.
Check: Node connectivity of subnet "192.168.3.0"
Source Destination Connected?
linuxdb1:eth1 linuxdb2:eth1 yes
Result: Node connectivity check passed for subnet "192.168.3.0" with node(s) linuxdb1,linuxdb2.
Suitable interfaces for VIP on subnet "XXX.XXX.X.XX":
linuxdb1 eth0:XXX.XXX.X.XX
linuxdb2 eth0:XXX.XXX.X.XX
Suitable interfaces for the private interconnect on subnet "192.168.3.0":
linuxdb1 eth1:192.168.3.49
linuxdb2 eth1:192.168.3.81
Result: Node connectivity check passed.
Checking system requirements for 'crs'...
No checks registered for this product.
Pre-check for cluster services setup was unsuccessful on all the nodes.

Prkc 1002 during clusterware installation

Hi,
At the time of oracle cluster installation i got the below error :
WARNING: Error while copying directory /u01/app/oracle/product/10.2.0/crs_1 with exclude file list 'null' to nodes 'prod2'. [PRKC-1002 : All the submitted commands did not execute successfully]
so i later come to know that my time are not in sync so next time again started from scrtach and this time with help of ntp i syncronise the time and node 2 was 3 seconds ahead but still the same error and this is what i got from the above mentioned file : /u01/app/oracle/oraInventory/logs/installActions2011-07-25_01-05-27PM.log
prod2:
/bin/tar: ./bin/vipca: time stamp 2011-07-25 13:13:54 is 202 s in the future
/bin/tar: ./bin/crs_unregister: time stamp 2011-07-25 13:13:22 is 170 s in the future
/bin/tar: ./bin/ocrdump: time stamp 2011-07-25 13:13:21 is 169 s in the future
/bin/tar: ./bin/crs_relocate: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/clsfmt: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/evmlogger: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/crsctl: time stamp 2011-07-25 13:13:21 is 166 s in the future
/bin/tar: ./bin/gsdctl: time stamp 2011-07-25 13:13:21 is 165 s in the future
/bin/tar: ./bin/cluutil: time stamp 2011-07-25 13:13:23 is 166 s in the future
/bin/tar: ./bin/ocssd: time stamp 2011-07-25 13:13:21 is 164 s in the future
/bin/tar: ./bin/crs_getperm: time stamp 2011-07-25 13:13:23 is 166 s in the future
/bin/tar: ./bin/crs_stop: time stamp 2011-07-25 13:13:22 is 165 s in the future
/bin/tar: ./bin/srvctl: time stamp 2011-07-25 13:13:21 is 162 s in the future
/bin/tar: ./bin/crs_stat: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmshow: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmwatch: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmd: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/lsnodes: time stamp 2011-07-25 13:13:23 is 163 s in the future
/bin/tar: ./bin/evminfo: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/clscfg: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/oifcfg: time stamp 2011-07-25 13:13:23 is 160 s in the future
/bin/tar: ./bin/evmmklib: time stamp 2011-07-25 13:13:22 is 158 s in the future
can anyone please help ............. iam struggling with this since 3 days
Edited by: abc on Jul 25, 2011 1:35 PM

abc wrote:
Hi,
At the time of oracle cluster installation i got the below error :
WARNING: Error while copying directory /u01/app/oracle/product/10.2.0/crs_1 with exclude file list 'null' to nodes 'prod2'. [PRKC-1002 : All the submitted commands did not execute successfully]
so i later come to know that my time are not in sync so next time again started from scrtach and this time with help of ntp i syncronise the time and node 2 was 3 seconds ahead but still the same error and this is what i got from the above mentioned file : /u01/app/oracle/oraInventory/logs/installActions2011-07-25_01-05-27PM.log
prod2:
/bin/tar: ./bin/vipca: time stamp 2011-07-25 13:13:54 is 202 s in the future
/bin/tar: ./bin/crs_unregister: time stamp 2011-07-25 13:13:22 is 170 s in the future
/bin/tar: ./bin/ocrdump: time stamp 2011-07-25 13:13:21 is 169 s in the future
/bin/tar: ./bin/crs_relocate: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/clsfmt: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/evmlogger: time stamp 2011-07-25 13:13:22 is 168 s in the future
/bin/tar: ./bin/crsctl: time stamp 2011-07-25 13:13:21 is 166 s in the future
/bin/tar: ./bin/gsdctl: time stamp 2011-07-25 13:13:21 is 165 s in the future
/bin/tar: ./bin/cluutil: time stamp 2011-07-25 13:13:23 is 166 s in the future
/bin/tar: ./bin/ocssd: time stamp 2011-07-25 13:13:21 is 164 s in the future
/bin/tar: ./bin/crs_getperm: time stamp 2011-07-25 13:13:23 is 166 s in the future
/bin/tar: ./bin/crs_stop: time stamp 2011-07-25 13:13:22 is 165 s in the future
/bin/tar: ./bin/srvctl: time stamp 2011-07-25 13:13:21 is 162 s in the future
/bin/tar: ./bin/crs_stat: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmshow: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmwatch: time stamp 2011-07-25 13:13:22 is 163 s in the future
/bin/tar: ./bin/evmd: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/lsnodes: time stamp 2011-07-25 13:13:23 is 163 s in the future
/bin/tar: ./bin/evminfo: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/clscfg: time stamp 2011-07-25 13:13:22 is 162 s in the future
/bin/tar: ./bin/oifcfg: time stamp 2011-07-25 13:13:23 is 160 s in the future
/bin/tar: ./bin/evmmklib: time stamp 2011-07-25 13:13:22 is 158 s in the future
can anyone please help ............. iam struggling with this since 3 days
Edited by: abc on Jul 25, 2011 1:35 PM- Please make sure your date on all node.
- use runcluvfy.sh to verify before install
runcluvfy.sh cluvfy stage -pre crsinst -n all -r 10gR2
- What is OS?

PRKC-1044 while installing Clusterware

Hi
i am installing Oracle Clusterware(10.2.0.1.0) on Solaris 10
and i am getting the above mentioned error PRKC-1044 - During Clusterware Install .
for that i have checked the SSH configuration and from both Parivate and public IP in can able to login without prompting for password .And i have created a Link file also for /usr/bin/ssh /usr/local/bin/ssh
when i run CVU it says that no user equliance ...
do we need any patch for cluster or i have install any OS cluster software for this issue...

1. when i run CVU it says that no user equliance ...
As per the above looks like the OS user on all nodes don't have same id's ?
Can you check if the id is same on all nodes.
2. Before you start installation check if ssh is working fine or not.
$ssh <nodename> date

Clusterware install cannot see raw partitions during ocr/votedisk selection

I have made 4 extended logical drives from EMC shared storage to be visible from my two nodes on 64bit windows 2003 server. During Clusterware installation while selecting the disks for OCR and Voting file, I cannot see the raw shared volumes.
The following is the output of cluvfy utility for component shared storage accessibility,
# runcluvfy.exe comp ssa -n node1,node2
Verifying shared storage accessibility
Checking shared storage accessibility...
Shared storage check failed on nodes "node2,node1".
Verification of shared storage accessibility was unsuccessful on all the nodes.
I also get exectask.exe encounter a problem and needed to close meassage aswell.
[email protected]

One more important point I noticed is that for RAC on windows 2003 Enterpriser Edition Server 64bit it is must that one should automatically mount the shared disks. For this do the following on command prompt.
c:\>Diskpart
Diskpart> automount enable
This command will automount the shared storage on the server. This should be done manually as it is not enabled on windows environment and it should be done only once.
[email protected]

Root.sh fails on second node during clusterware installation

I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...

Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html

CRS PRKC-1044

Hi,
I have a problem that I don`t understand concerning installation of CRS Oracle.
Yesterday I was installing CRS and on stage: 'Remote Operations Pending' I had problem with „/bin/tar”. Now I know that this was the fault of bad configuration NTPD.
I deleted all installed files from destination directory (and oraInventory) because I wanted make reinstallation
But after this event I really had a problem then, because on stage 'Specify Cluster Configuration' I received information in console:
+[PRKC-1044 : Failed to check remote command execution setup for node PK.localdomain using shells /usr/bin/ssh and /usr/bin/rsh+
+PK.localdomain: Connection refused]]+
and pop-up that: nodes are not clusterable...
I met this error earlier, but now my SSH configuration is correct (in my opinion :) - yesterday i was installing CRS(!))
This is very different, my CVU says that:
Checking node reachability...
Check: Node reachability from node "PK"
Destination Node Reachable?
MB yes
PJ yes
PK yes
Result: Node reachability check passed from node "PK"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
PK passed
PJ passed
MB passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
PK passed
PJ passed
MB passed
Verification of the hosts config file successful
Interface information for node "PK"
<censored> ;)
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
PK:eth1 PJ:eth1 yes
PK:eth1 MB:eth1 yes
PJ:eth1 MB:eth1 yes
Result: Node connectivity passed for subnet "192.168.1.0" with node(s) PK,PJ,MB
Check: TCP connectivity of subnet "192.168.1.0"
Source Destination Connected?
PK:192.168.1.117 PJ:192.168.1.115 passed
PK:192.168.1.117 MB:192.168.1.116 passed
Result: TCP connectivity check passed for subnet "192.168.1.0"
Check: Node connectivity of subnet "<censored>.0"
Source Destination Connected?
PK:eth0 PJ:eth0 yes
PK:eth0 MB:eth0 yes
PJ:eth0 MB:eth0 yes
Result: Node connectivity passed for subnet "<censored>.0" with node(s) PK,PJ,MB
Check: TCP connectivity of subnet "<censored>.0"
Source Destination Connected?
PK:<censored>.17 PJ:<censored>.15 passed
PK:<censored>.17 MB:<censored>.16 passed
Result: TCP connectivity check passed for subnet "<censored>.0"
Interfaces found on subnet "<censored>.0" that are likely candidates for VIP are:
PK eth0:<censored>.17
PJ eth0:<censored>.15
MB eth0:<censored>.16
Interfaces found on subnet "192.168.1.0" that are likely candidates for a private interconnect are:
PK eth1:192.168.1.117
PJ eth1:192.168.1.115
MB eth1:192.168.1.116
Result: Node connectivity check passed
So? Some ideas?
Thanks for help,
Mariusz.

markoz wrote:
Hi,
Can you ssh from one to another node without password?I can use ssh beetween any nodes without pass., this is the proof:
#Notice: I have 3 nodes: mb, pk, pj (public domain), private domain: pmb, ppk, ppj
[oracle@PK /]$ ssh pj date
nie, 30 maj 2010, 23:30:47 CEST
[oracle@PK /]$ ssh pj.localdomain date
nie, 30 maj 2010, 23:30:58 CEST
[oracle@PK /]$ ssh pk.localdomain date
nie, 30 maj 2010, 23:31:04 CEST
[oracle@PK /]$ ssh pk date
nie, 30 maj 2010, 23:31:17 CEST
[oracle@PK /]$ ssh mb date
nie, 30 maj 2010, 23:31:21 CEST
[oracle@PK /]$ ssh mb.localdomain date
nie, 30 maj 2010, 23:31:28 CEST
[oracle@PK /]$ ssh pmb.localdomain date
nie, 30 maj 2010, 23:31:39 CEST
[oracle@PK /]$ ssh ppj.localdomain date
nie, 30 maj 2010, 23:31:49 CEST
[oracle@PK /]$ ssh ppk.localdomain date
nie, 30 maj 2010, 23:31:54 CEST
[oracle@PK /]$ ssh ppk date
nie, 30 maj 2010, 23:32:00 CEST
[oracle@PK /]$ ssh pmb date
nie, 30 maj 2010, 23:32:05 CEST
[oracle@PK /]$ ssh ppj date
nie, 30 maj 2010, 23:32:09 CEST
[oracle@MB root]$ ssh pk date
nie, 30 maj 2010, 23:38:25 CEST
[oracle@MB root]$ ssh ppk date
nie, 30 maj 2010, 23:38:30 CEST
[oracle@MB root]$ ssh ppk.localdomain date
nie, 30 maj 2010, 23:38:35 CEST
[oracle@MB root]$ ssh pk.localdomain date
nie, 30 maj 2010, 23:38:39 CEST
[oracle@PJ ~]$ ssh pk date
nie, 30 maj 2010, 23:39:28 CEST
[oracle@PJ ~]$ ssh ppk date
nie, 30 maj 2010, 23:39:31 CEST
[oracle@PJ ~]$ ssh ppk.localdomain date
nie, 30 maj 2010, 23:39:37 CEST
[oracle@PJ ~]$ ssh pk.localdomain date
nie, 30 maj 2010, 23:39:41 CEST
and this is a reason, why I don`t understand this case, and I don`t know what I have to do now...
thanks for your try answering to my question...
Edited by: Mariusz Cypliński on 2010-05-30 14:57

New 11g Clusterware install encounters parkwebwin-v02.prod.mesa1.secureserv

Performing a new fresh install of Oracle 11g Clusterware and I continue to get the following error during the install:
ipAddress = 68.178.232.99
INFO: Query Returned: parkwebwin-v02.prod.mesa1.secureserver.net
INFO: Calling Query netQueries10.2.0.2.0 getMachineName
hostName = parkwebwin-v02.prod.mesa1.secureserver.net
INFO: Query Returned: parkwebwin-v02
INFO: Calling Query netQueries10.2.0.2.0 getMachineName
somehow these are show-stoppers for a fresh install of CRS on Red Hat Linux EL5.3 64bit.
Any Ideas on how to stop my linux server from seeing "parkwebwin-v02.prod.mesa1.secureserver.net ?
and IP: 68.178.232.99
Thanks

68.178.232.99 is not in either of my RAC nodes /etc/hosts files
During the Clusterware install the "Product-Specific Prerequisite Checks" are successful
At the "Specify Cluster Configuration" I have
rac1.domain.com rac1-priv.domain.com rac1-vip.domain.com and I add the following:
rac2.domain.com rac2-priv.domain.com rac2-vip.domain.com
THanks

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

Ora-01031: Insufficient Privileges error during 10g install on Suse 9.1

I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-Daniel

I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this!

Ora-01031: Insufficient Privileges during 10g install on Suse 9.1

I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-Daniel

I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this!

Toshiba M305D : blue windows screen during the install of Windows 7 / Vista, no Audio on Windows XP

Dear Users
Last week I had a clean install of Windows 7 64bit on my M305D-S4830 laptop.
I've used this OS on this machine before, and it worked fine.
After installing Win7, the device manager showed 2 unknown devices. First I've installed the O2 multimedia card reader, and it went ok. Secondly I've installed for the unknown device "hdmi audio" a hdmi audio driver from ATi, since the notebook has AMD 780V chipset and a Radeon HD3100 (it hasn't any hdmi output, but I didn't want to have any unknown devices).
And my nightmare begun.
While restarting after the driver upgrade, my brand new Win 7 boot hang on blue screen code: 0x00000124, which is common for many hardware and software faults. I ran safe mode to clean the system from the hdmi audio driver, but the catalyst install manager dind't let me to remove it. Since it was a fresh install on a formatted HDD, I took the time for another clean install (20 mins). But during the Win 7 install, the installer hang on blue screen, guess what, code: 0x00000124. I changed to the factory-backup Win Vista disks of my laptop, but Vista had the same problem, I couldn't install this OS either, blue screen during install, too.
I took a Win XP Prof SP3 as a last option, and I could finally install it. But after the install, I had problems with the Radeon HD3100, I couldn't install the driver from the .exe, I had to make it from the device manager via properties/I choose to/graphics adapters/own disk. So I don't have the control centre, but the display works in 1280x800.
The bigger problem is: no sound.
The device manager in Win XP shows only one unknown audio device: the hdmi audio. I can't install the conexant drivers, because it says I don't have the device for that. When I install the ATi hdmi driver for XP, I get the blue screen with the error 0x00000124. Nice.
I have updated bios, and made a proper format with the partititons deleted, but it didn't helped. I think the Vista/7 install crashes at the point, when it tries to install the audio driver during OS install, because the XP was running until I have tried to install it, too. But I can't configure the Vista/7 install not to try loading it.
So my laptop is only comnpatible with XP, the install of Vista or 7 crashes. And in XP, I have got no audio devices, therefore no sound. You can imagine, how glad I am looking at my Harman/Kardon speakers right now...
Any ideas?
Alex

Satellite M305D-S4830
Any ideas?
Alex, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If you didn't burn them, order the discs.
Order Toshiba Recovery Media
If it doesn't run properly after that, you have a hardware malfunction.
-Jerry

Error during BIBeans instalation on Jdeveloper 9.0.3.3 - 1205

I cannot install version 9.0.3.6.0 of BIBeans on Jdeveloper 9.0.3.3. During the instalation Universal
Instaler shows this error:
Oracle BI BEans component will not be installed since Jdeveloper files of version 9.0.3.1035 9.0.3.1.1107 9.0.3.2.0 (or higher) were not found in the current Oracle Home (C:/Oracle/JDEV903).
I think, Jdeveloper is installed correctly, i don't why i can't install BIBeans.

1. Save JDeveloper file %JDEV_HOME%\jdev\bin\jdev.conf as jdev.conf.old
2. Replace the last line in file %JDEV_HOME%\jdev\bin\jdev.conf as follows.
Old contents: AddVMOption -Dproduct.version=9.0.3.1035
New contents: AddVMOption -Dproduct.version=9.0.3.1.1107
Then resave file %JDEV_HOME%\jdev\bin\jdev.conf
3. Now BIBeans 9.0.3.4.0 can be installed correctly into the Oracle JDeveloper 9.0.3.1 (Build 1107) home directory with Oracle Universal Installer 2.2.0.14.0
4. After step 3 has finished, replace file %JDEV_HOME%\jdev\bin\jdev.conf with file jdev.conf.old (from in step 1).
Greetings
Damian

PRKC-1044 - During Clusterware Install

Similar Messages

Maybe you are looking for