Pro*C: status? fix? (being worked on?)

Anyone have succeeded using Pro*C?
My experience has been segmentations faults and missing includes
(case problems with names, etc, see previous posts).
The question is: * is there a (consistent... :-) workaround?
* will be a new version fixed?
I'm interested more in connecting local processes to oracle in
other machines (and OSes) than running a server locally.
So far the EAP release has worked for me pretty well for the
later, but not for the former (unable to locally compile with
ProC, compiling in another platform and moving the .c's works for
small apps, but big apps core dumps, etc).
Any experiences / suggestions?
New release in our future?
-cristian
null

Cristian Ferretti (guest) wrote:
: Anyone have succeeded using Pro*C?
: My experience has been segmentations faults and missing
includes
: (case problems with names, etc, see previous posts).
: The question is: * is there a (consistent... :-) workaround?
: * will be a new version fixed?
: I'm interested more in connecting local processes to oracle in
: other machines (and OSes) than running a server locally.
: So far the EAP release has worked for me pretty well for the
: later, but not for the former (unable to locally compile with
: ProC, compiling in another platform and moving the .c's works
for
: small apps, but big apps core dumps, etc).
: Any experiences / suggestions?
: New release in our future?
: -cristian
Hi
Missing headers problem can be solved by applying patches 1 and 2
from support -section of technet.oracle.com.
Pro*C coredumps can be avoided either by Pro*C compiler option
PARSE=NONE or Pro*C compiler option LTYPE=NONE
At least I have been able to compile and run Pro*C-programs with
EAP-version.
Hope this helped
Tervo Salminen
null

Similar Messages

Macbook Pro 1.83ghz Woes - continiously being fixed - never working :(

I have a Macbook Pro 1.83Ghz Intel Core Duo - with lots of problems.
Back in November, it had problems with the Fans making a clunking / grinding noise and - the fans were replaced as well as the LogicBoard... This worked for up until a few weeks ago and then the right fan started playing up with the same issue and MBP was getting extremely hot - fans were running at 6-7000 RPM - even though iStat Pro isn't completely accurate - it was showing the .c temperature running at 85 degrees centigrade - pretty hot!!!
So 3wks ago, the right hand fan was replaced as well as temperature sensor on the Logicboard. Once fixed this worked for 3 days and then the fans went crazy and the MBP went stupidly hot again - right fan going crazy, rattling and clunking.
Installed Leopard 10.5.2 update > asked to restart > then HD failed to boot > No OS available etc. Took to be repaired, right fan replaced again and internal HD replaced.
Got the laptop back after parts replacement and testing, worked for a few hours and then right fan started its old tricks but then the left fan started doing the same - now both fans are whirring and making grinding noises AND the HD makes clunking noises (like the heads are slipping) when the disk gets busy!!
What can I do now? I'm gonna send it direct to Apple rather than this ****** 3rd party Apple Center that continuously fails to fix this Laptop.
Hopefully Apple can sort this out for good
Chris

This is sounding more and more like a lemon. I'd call AppleCare, tell them of your experiences, and if they won't replace your machine, ask to be patched up to Customer Relations and get a case number. This being a user to user board all we can do is offer you sympathy. Now if you are at a stage where you just got back the machine and it hasn't yet failed we can offer some tips to prevent failure.
AppleCare can be reached here:
http://www.apple.com/contact/phone_contacts.html
And don't give in to any excuses. Just take it through the chain until you get the response that satisfies you.

My macbook pro's camera isn't working. How do I fix that?

My 2011 Macbook Pro's camera is not working. It is updated to the latest OS X, and I have done troubleshooting. What else can I do to fix this problem?

http://support.apple.com/kb/HT2090
Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

My macbook pro's camera isn't working ! how can i fix it?

my macbook pro's camera isn't working ! how can i fix it?

Alegarledzm wrote: my macbook pro's camera isn't working ! how can i fix it?
How to Troubleshoot iSight

Pro 9500 mark 2 status monitor not working

My status monitor stopped working on my 9500 mark2.I uninstalled driver and software and reinstalled,no luck.Changed usb cable and usb port.Printer is still working but status monitor can not commuicate with printer.
Thanks
MIKE

Hi, Mike!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
I apologize if there's a similar thread out there, I couldnt find one. -

Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
No it will not.
Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
If there is no backup of data, get that off the machine using a external boot drive.
To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
How to erase and install Snow Leopard 10.6
Install/upgrade RAM or storage drive in Mac's
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

MacBook Pro late 2008 no longer working with Airport Express

Hi,
since a few days I have big problems with my MacBook Pro (late 2008) and my Airport Express. The MacBook can't find the airport express anymore, even not with the airport utility...
The Airport Express is correctly configured as my Ipod, Blackberry and Dell pc are connecting to it and do have internet access...
I can only manage the Airport Express when I'm directly connected to it with an ethernet cable.
My brother has an airport expreme, I tested it with my MacBook Pro and there it just works fine...
Can anyone help me? Has it something to do with an update for Mac OS X or the firmware from the Airport Express?
Many thanks in advance!

Thanks for the response,
1. I live in Atlanta, close enough to an Apple store. But I just know that going there will probably mean I'll have to get the logic board replaced.
2. The only thing I noticed before the first USB port started acting funny was that my battery status changed to "Service Battery". I plan on replacing it this week too.
3. Nope only difference is that my battery drains kind of fast. After about 3-4 hours of my normal usuage with it (Internet, music, videos, and sometimes using Logic) it will be time to hook up the charger.
Would replacing the battery do anything? I'm not thinking it would but figure it'd be worth a shot since I've got to replace it anyway.
And to goofyziggy,
I too noticed that most people who had this problem had some version of OSX 10.8.x

HP Officejet Pro 8600 Duplex Printing Not Working

I am running Windows 7. Duplex printing is not working on my Officejet Pro 8600. It has worked in the past, but I cannot get it to work now. I have reset the printer and restarted by laptop. I have not made any changes that should affect the duplex printing. Thank you.

Hi there beachlover.
Hope you are doing wel and welcome to the HP forums;
The Hardware Diagnostic tool can help you find common hardware issues and in most occasions fix them Give it a try by going to this link www.hp.com/go/tools Let me know the results and include any errors that the utility finds
I will try my best to help you .
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Macbook pro (early 2008): Trackpad not working under Windows XP

My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
What shall i do now? Thank you for any advices.

since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback

Operation status 'Fixed' in Production order

Hello all,
We are facing an issue with Operation Status 'Fixed'. If we go to transaction /sapapo/rrp3 and double click on Production Order (R). Then clcik on Operation , say 0100, at right side you will see multiple Operation status. One of them is 'Fixed'. We can make this indicator active ny fixing the order in planning board (right click=> Fix).
Here we are facing an issue. We are not fixing any order through planning board and still I see Operation status 'Fixed'. Even I unfix it, next day it gets fixed automatically. I suspect that either any job in APO or R/3 do this activity. Please note that in this case 'Date_Fixed' indicator is not checked. Like when you fix the order from planning baord, system check the checkbox for 'Date_Fixed" and for operation status 'Fixed'. In our case only Operation status becomes 'Fixed.
Please let me know what are the different ways to fix the operation status.
Regards,
Nitin

Thanks for the reply.
As you mentioned, if the operation is scheduled at non-working hours then it gets fixed. I checked with the user and they confimred that they are not using the non production hour while rescheduling the order. It means they are not using the check box of non-working hour from DS startegy or Heuristic.
Please let me know what are the different possibilities which can schedule the operation in non-working hours.

Confirmation status "Currently being transferred"

Hi,
We are using Extended classic scenario in SRM 4.0 with SRM server 5.0.
Some of the confirmations posted for the POs are in status Currently being transferred or Error in process.
We need to delete some of those confirmations but we the Delete and Return delivery buttons are disabled in those confirmations.
When I checked the header status of confirmation it is showing that Currently being transferred. But the confirmation has been transferred to back end.
If the status is in "Transmitted to back end" then the Delete and Return delivery button will be enabled.
Is there way by which we can change the status of the confirmations.
Please help me.
Thanks.

Hi,
SAP OSS notes 644963 and 1143245 solve the issue.
An explanation about reproducing the issue as it follows:
Create PO. ( i.e 3.5 units)
Confirm 2 units. An entry in table BBP_document_Tab is created.
Clean_reqreq_up runs.Cleans entries in the BBP_docuement_TAB.
Confirm 1.5 unit.An entry in table BBP_document_Tab is created.
Cancel Confirm 2 units. The entry in the BBP_Document_Tab is overwritting the last GR of 1.5 unit. Here is the root cause of the issue.
Clean_reqreq_up runs.Cleans entries in the BBP_docuement_TAB.
Summary:
All confirmations are posted succesfully in both systems, but the confirmation of 1,5 units remains in the "Currently being transferred status" as Clean_reqreq_up has never processed an entry for this GR an the status "Currently..." has never been put inactive.
SAP note 644963 cleans the wrong GR.
SAP note 1143245 fix the gap in the code and prevents the error ocurring again.
I hope this helps.
Regards,
Abraham

Satellite Pro L20: WLan adaptor stopped working and will not enable

Hi,
I have a Satalite Pro L20 which has been working fine. However, just before Christmas 2006, the wireless adaptor, (Atheros AR5005G), stopped working.
Windows XP Pro SP2 can see the adaptor, and network connections shows it as being enabled, but it doesn't see any networks.
The Atheros Client Utility Troubleshooter says that the adaptor pases it diagnostics up to the Radio test, when it says that the Radio is disabled and needs to be enabled in the Client Utility.
"Excellent!", I thought, opening up the utility with anticipation. Looked under the Action menu to find 'Enable Radio' is greyed out!!!
HELP!!
Any assistance is very welcomed.
Cheers,
Barry Smith.

Is there any hardware option to turn on and off your Wlan card? (switch)
Did you upgrade your Wlan driver recently? (if yes, maybe with wrong driver?)
I've had a similar issue once and solved it through driver updates... wanna give it a try?
You can download the generic Atheros driver (Version 5.0.0.107) available from here:
http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip
Regards
electrochain

Healing brush or eraser in CS4 smears or erases a part of the photo not being worked

While healing or erasing in Photoshop CS4, often it doesn't affect the area being worked, but smears or erases a different part of the photo. If I am zoomed in and don't notice the problem, it can ruin the photo and cause me to have to start over. Anyone know a fix for this?

The typical (and usually correct) advice is to update your drivers for your video card and tablet (if any).
Also make sure you have the latest Photoshop update (11.0.2).
-Noel

Fix not working to disable http trace in iPlanet 6.0 SP5

Hello.
I'm running iPlanet web server 6.0 SP5 on Solaris 8. A recent security compliance scan disclosed a number of vulnerabilities, among them the fact that I have HTTP TRACE enabled. I applied the fix to obj.conf described at http://sunsolve6.sun.com/search/document.do?assetkey=1-26-50603-1&searchclause=security
stopped and restarted the server, but the TRACE did not disable. The way I test this is
<code>
telnet server-name http-portnum
TRACE / HTTP/1.1
HOST:hostname
</code>
Rather than generating an error (501?) as it should it comes back with
<code>
HTTP/1.1 200 OK
Server: Netscape-Enterprise/6.0
Date: Fri, 13 Aug 2004 20:31:44 GMT
Content-length: 36
Content-type: message/http
</code>
In addition if , instead of TRACE / HTTP/1.1 I use the command
<code>
OPTIONS * HTTP/1.1
</code>
I get
<code>
HTTP/1.1 200 OK
Server: Netscape-Enterprise/6.0
Date: Fri, 13 Aug 2004 20:32:03 GMT
Content-length: 0
Allow: HEAD, GET, PUT, POST, DELETE, TRACE, OPTIONS, MOVE, INDEX, MKDIR, RMDIR
</code>
So clearly it's not disabled.
Here is a snippet of the obj.conf file showing the inserted "fix" :
<code>
# Sun Netscape Alliance - obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="default">
<Client method="TRACE">
AuthTrans fn="set-variable" remove-headers="transfer-encoding" set-headers="cont
ent-length: -1" error="501"
</Client>
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service type="magnus-internal/jsp" fn="NSServletService"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service fn="shtml_send" type="magnus-internal/parsed-html" method="(GET|HEAD)"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
AddLog fn="flex-log" name="access"
</Object>
</code>
Can anyone suggest why this isn't working? I've beaten this one to death. Thanks. Peter.

1) Why would TRACE and OPTION request specifying HTTP 1.0 vs. 1.1 yield such different results?
Web Server 6.0 only implements the TRACE and OPTIONS methods for HTTP/1.1, not HTTP/1.0. This is reasonable as TRACE and OPTIONS are part of the HTTP/1.1 protocol and not the HTTP/1.0 protocol.
In other words, TRACE is always disabled for HTTP/1.0 requests, even if you don't use the set-variable work around.
2) Is the OPTIONS command a legitimate test of whether this fix works? If it is, has anyone managed to have the command return an "Allow:" line MINUS the TRACE?
Nope, not in Web Server 6.0. OPTIONS will always list TRACE. (Note that in Web Server 6.1, TRACE is not as tightly integrated into the server core. As a result, OPTIONS will conditionally list TRACE in 6.1.)
3) Has anyone managed to generate a 501 error message after specifying TRACE / HTTP/1.1 instead of 1.0?
Nope, not in Web Server 6.0.
4) Does this fix really work?
I wouldn't call it a fix; it's a work around. However, it does effectively disable TRACE. The work around is a bit of a kludge, resulting in the odd 413 status code.
The real "fix" appears in Web Server 6.1 where you can disable TRACE simply by commenting out the Service method="TRACE" fn="service-trace" line in obj.conf.

Pro*C: status? fix? (being worked on?)

Similar Messages

Maybe you are looking for