Proactive monitoring of failed processes

Hi there,
We have a requirement to generate an alert in an external system when a process fails. I understand how to work with failures at an activity level using result handlers and I can execute a custom failure alert process in each activity, however, I would like to trigger this custom process at the process level, not the activity level as it is not feasible to configure the result handler for every single activity of every process. Is this sort of technique possible? Within CPO is there there some way of monitoring for failed processes?
Thanks in advance for any guidance!
Dave

There is a "Process Failed" trigger that you can use to monitor for failed process instances.

Similar Messages

Failed process not in SXMB_MONI_BPE list

Hi,
I'm on Pi7.1 and have a BPM monitoring related problem: In SXMB_MONI I can see, that my process was aborted due to a faild send action (target system not reachable). When I invoke SXMB_MONI_BPE the process instance is not contained in the list of failed processes. Analyzing the BPM inbound processing queue (SQM2) I can find a stuck queue exposing the error messages "Permanent error in BPE inbound processing".
Does anybody have an idea, why the related business process is not contained in the list of faild processes in SXMB_MONI_BPE? - this was the case on XI3.0 -
Kind regards,
Heiko

Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,

Business Process Monitoring: Activate Business Processes

Hi!
I am on SAP Solution Manager 7.0 and have the following SAP landscape:
SAP XI/PI, SAP ERP 2005.
I would like to monitor the IDOCs sending from SAP ERP to SAP XI in Business Process Monitoring.
I successfully acitvated the Business Process Monitoring.
My problem:
I cannot choose/see any business processes in the area Business Process Monitoring Setup --> Business Processes.
I already defined the Solution Support Organization with 2 members and choossed all the monitoring roles.
Qurstion
How to make visible any business processes in this area?
Thank you very much!
regards
Thom

Hello Thom,
perhaps you should also have a look into the Setup Guide for Interface Monitoring under https://service.sap.com/bpm --> Media Library --> Technical Information.
Regards
Volker

Transaction Monitor u2013 Services Processes into BI

Hello Experts,
I'm wondering if it is possible to get tickets information from Solution Manager and have some statistics in BI.
For instance the average time of ticket resolution, number of tickets per team/person/month, etc, etc
At this moment Iu2019m using the ZNTP transaction in solution manager to access Transaction Monitor u2013 Services Processes.
I would like to install BI Content to have some summary queries about the activity within ZNTP.
I already connected BI to SMP and also replicated metadata, however the data sources available just by the name donu2019t help me much.
Perhaps I should check the content version within solution manager and BI but I don't know how to performe such verifications.
Thanks

using rsa3 in the source system I'm getting the follow error:
The extraction program does not support object 0CRM_SRV_PROCESS_H
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0CRM_SRV_PROCESS_H.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Can you help me?

Retrying a particular failed Process Task for all the OIM Users

Hi,
We are using OIM 11.1.1. On a particular day one of the systems was unavailable hence all the process tasks for that system failed for a number of users. Is there any way of viewing all the failed process task and retrying them together, there are over 3000 users and it is not possible to go through them one by one.
Any method either through the console or doing it programatically would be very helpful.
Thanks in advance.
UZ

The OTI table has all the rejected task information. You can use it to link to user and resource instances through the OIU table as well.
You can then take the SCH_KEY and then use code like this to process them:
public void completeTask(){
long[] task = new long[] {123123,3242134,23432,43534,34656,456456};
int counter = 0;
for (long key:task){
try {
counter++;
provIntf.retryTask(key);
System.out.println(counter + "|" + task.length);
} catch (Exception e) {
-Kevin

FAIL: process disp+work.EXE Dispatcher not running

Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
Peerasit

Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

Proactive monitoring

Hi Expert,
I would like to implement a proactive monitoring system to keep check the end to end performance and service level agreement (SLA) for different network equipment and systems. For example, three web servers are in production environment (2 routers and 16 ethernet switches, 3 firewalls ... ect), I would like to ensure that the network delay within SLA (e.g. less than 10ms), the service availability of web server / network (e.g. 99.5%), .. etc
Any Cisco product (application) would offer above feature and function?
Anita

Hi Anita,
Checkout Solarwind IP SLA monitor:
http://www.solarwinds.com/products/ip-sla-monitoring/info.aspx
Also, OpenNMS is a great NMS which can do hell lot of thing from a single box, only downside is that it is open source and hence you might have to do a bit of R&D to make it customise as per your needs:
http://www.opennms.org/
HTH,
Smitesh
PS: Please rate helpful posts...

Objects Locked by Failed Process Chain

HI,
I cannot update certain infopackages as they are locked by a failed Process Chain update, however I have checked sm12 and there are no locked items showing, also I have gone into RSA1 --> tools Attrib Change Run and into the InfoObject List and ther are no objects so i cant run the Atrrib change run from their either.
So if there is no locked items in Sm12 well then how do i unlock them?
Do i need to mark the failed Process chain as complete or something?
Thanks.

Is this in the Source Code tab? Sorry i do not see where i should input the Timestamp or where i actually run the RSDDS_AGGR_MOD_CLOSE function module?
This is the code i see when i Run SE37 with RSDDS_AGGR_MOD_CLOSE
FUNCTION RSDDS_AGGR_MOD_CLOSE.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(I_CNSID) TYPE RSSID
*" EXCEPTIONS
*"      X_MESSAGE
DATA: l_timestmp type rs_timestmp.
get time stamp field l_timestmp.
UPDATE RSDDAGGRMODSTATE set   closedfl     = rs_c_true
                                TIMESTMP_END = l_timestmp
                          where cnsid = i_cnsid.
IF SY-SUBRC NE 0.
    perform x_message using 'RSDDS_AGGR_MOD_CLOSE-1-'.
ENDIF.
ENDFUNCTION.

How do I monitor the listener process

After starting the listener, I have to wait for few min. before I connect to the database.
Otherwise I get the following error.
How do I monitor the listener process and make sure, still it is trying to
establishing connection with oracle instance ?
thanks
siva

After starting the listener, I have to wait for few
min. before I connect to the database.That's normal when the registration is dynamic (no SID_LIST in listener.ora). This does not happen if the listener is started before the DB. See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/architecture.htm#sthref429
But you can force the registration. As sysdba do
SQL> alter system register;
or you can statically configure your DB within listener.ora, SID_LIST section.
How do I monitor the listener process $ lsnrctl status
and
$ lsnrctl services

FAIL: process hdbdaemon HDB Daemon not running - HANA

Hello guys,
I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
I've already check the free space on the files systems as you can see here:
I can't figure out what is happening. Any suggestions?
Regards.

The startup error is somewhat misleading as Serge commented above:-
> FAIL: process hdbdaemon HDB Daemon not running
In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
> Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
It turned out that the profile was edited with the incorrect instance number <nn>. After correcting this error, HANA DB started up successfully.

Best proactive monitoring tool

HI,
Please advise the best network proactive monitoring tool, that can raise auto-alert tickets with Remedy software.
Thanks

1 Spotlight works in about the same fashion as Grid Control/OEM, so you need a database to store metrics
2 Grid Control can also take care of Oracle patches, notifying you a patch has been released, and optionally install it, and even of O/S patches
3 Spotlight is a product of a third party, so it will always be less tightly integrated with Oracle
4 The Grid Control is interfaced by means of a browser, whereas Spotlight needs a fat client. If you want to have Spotlight on multiple systems, you have to buy it multiple times.
Sybrand Bakker
Senior Oracle DBA

Does CUOM v2.3 monitor the dialer process from an ICM PG

Hi.
Does anyone know if CUOM vers 2.3 is able to directly monitor a 'Dialer Process' on a PG (ICM vers 7.2(5))?
From the screen-shot below it seems to be able to monitor all other PG related Processes without issues...
Thanks,
Niall

Just for the record, TAC have told me that there is no support for the 'dialer process' for any release of CUOM (current or future).
There is however aleerting for the PIM's which kind of gets around this!
Cheers

JRockit - Monitor JRockit java process

Hello everyone, We have Weblogic installed in our environment (Windows Server 2008R2) which is using JRockit as Java platform. I ran into issue where I cannot monitor the java process (connect to JVM) through the JRMC (JRockit Mission Control) as this java process is running from SYSTEM user account. Therefore it's not displaying as local JVM. If I run it through my account I can monitor it fine. Anyone can suggest how to monitor the java process which was ran from the SYSTEM account. I cannot login as the SYSTEM to the server tho. Thank you, Viktor Ozerov

Yes, that correct. You could enable ssl and/or authenticate to avoid that,
but I also think it's possible to enable only the local management agent, if you specify:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.local.only=true
(I think local.only defaults to true if you don't set any of the port properties, but I need to find out more about this)

Resending the Mesage in Message Monitoring is failed again & again

H i ! All
In Scenario Idoc to File , the connectivity between XI server & FTP was down , Now is up ,
a message is failed , now again i am re-sending the message from Message Monitoring , showing the belolw error , FTP Connection is UP now , in SXMB_MONI message is processed
Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/102/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
what can be the reason ???
Thanks
Abhishek

The prolem is stil the same .....
today more than 300 mesages get prossed . I can see on FTP , but 23 messages get failed ....using same communication channel ....
I am putting the details
Sucessed messges
Write to FTP server "10.10.100.205", directory "\STORES\0019\sapoutbound", file "ZINV01_ZINVMSG_001920090705-172939-687.XML"
failed messages
Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/193/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
Thanks
Abhishek
Edited by: Abhishek Agrahari on Jul 6, 2009 8:00 AM

How to handle delta failed process chain steps

Hi All,
I have a query regarding process chains were in processstep has delta load and there is dependency between the predeseccor and successor process steps,then
if the delta load fails due to any one of the following reasons
1) due to remote_icp locked the prtclr Infoobject the process step is executing .
2) due to any psa records errors and so on
Then how to handle delta and see that correct delta records were updated .
Because again for the nextday loads if the previous delta is incorrect it will give pop-up message that it is not possible.
If any suugestions pl guide me.
thanks
Venkat
[email protected]

1)Remove the lock by force from sm12 or wait till the lock is gone.Then see if the delta data has come till the PSA.Mark failed delta load RED and back it out from target.Then read everything in manually from PSA to target.
In process chains u can go the monitor entry for the failed load by..highlight chain..click log icon..give selection..for proper selection..see the failed node..right click..display messages..click on process monitor.
Sometimes even if infopackage is run successful manually,next steps in the chain do not kick off.
Use Siggi's excellent blog on this..(it works really well)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
2)Make request RED and back it out from target.
Correct records in the PSA and read everything in manually from PSA to data target.
Then use Siggi's blog.
If data hasnt come to PSA do a delta repeat.
Always check yesterday's chain run about 1-2 hrs before today's chain kicks off.
cheers,
Vishvesh
Message was edited by: Vishvesh

Proactive monitoring of failed processes

Similar Messages

Maybe you are looking for