Problem about tdp for sap rman error

I installed tdp for sap and scheduled a online backup , after the backup finished, I checked the log.
all data files were backuped successfully. but there is an error about rman. I do not know how to do about that? Could you help me? I think the backup could be successful without rman, why in the backup log, it shows a rman error .
I checked the initDEV.sap and initDEV.utl, there is no entry about rman, I do not use rman_util.
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Sun Mar 8 13:34:21 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: DEV (DBID=3672496816)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28> 29> 30> 31> 32>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of catalog command on default channel at 03/08/2009 13:34:23
ORA-19564: error occurred writing 8192 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27041: unable to open file
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 3
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
BR0279E Return code from 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance DEV failed
BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
BR0532E Cataloging backups of all database files failed

Hello Victor,
we need the RMAN commands that were executed and at which step this error occurs.
Maybe it is a problem with the snap controlfile for the AUTOBACKUP or many other scenarios are possible.
We are also using the TDP for mySAP, but without RMAN support.
If you want to use just RMAN (like we do for non-SAP systems / no BR*Tools) you can save a lot of license/service costs, if you are using TDP for Oracle, but keep in mind that you are losing the support for that by SAP. You can directly open a call by oracle for these situations.
If you want this scenario as described we need more detailed information. Maybe a "LIST BACKUP" would also be nice.
Regards
Stefan

Similar Messages

Problem about tdp for sap

I installed tdp for sap and scheduled a online backup , after the backup finished, I checked the log.
all data files were backuped successfully. but there is an error about rman. I do not know how to do about that? Could you help me? I think the backup could be successful without rman, why in the backup log, it shows a rman error .
I checked the initDEV.sap and initDEV.utl, there is no entry about rman, I do not use rman_util.
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Sun Mar 8 13:34:21 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: DEV (DBID=3672496816)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28> 29> 30> 31> 32>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of catalog command on default channel at 03/08/2009 13:34:23
ORA-19564: error occurred writing 8192 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27041: unable to open file
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 3
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
BR0279E Return code from 'SHELL=/bin/sh /oracle/DEV/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance DEV failed
BR0280I BRBACKUP time stamp: 2009-03-08 13.34.23
BR0532E Cataloging backups of all database files failed
Edited by: victor on Mar 9, 2009 2:30 AM

Victor,
Looks like you have permission problems. Please check attached note to correct them.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=113747]
Hope this helps.
Manoj Chintawar

Problems with TDP for Oracle

Hello, I'm having problems setting up TDP for Oracle. When I run a backup, I get the following error stack from RMAN:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on t1 channel at 02/21/2007 09:40:52
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
IBM AIX RISC System/6000 Error: 106: Reserved errno was encountered
Additional information: 7011
ORA-19511: Error received from media manager layer, error text:
SBT error = 7011, errno = 106, sbtopen: system error
I'm running AIX 5.2, TDP 5.3, level 3
Oracle version 9.2.0.4
My libobk.a file is linked in the following manner
libobk.a@ -> /usr/lib/libobk64.a
/usr/lib/libobk64.a@ -> /usr/tivoli/tsm/client/oracle/bin64/libobk64.a
I'm not sure if the version of AIX i'm running is 64 bit or not, does anyone know how I can check this?
Oh and the sbtio.log file is empty.

Check this website for the error stack:
http://www-1.ibm.com/support/docview.wss?uid=swg21197242
This command will tell you 32 or 64 bit, more exactly when it is 32bit you will see bos.64bit not installed.
lslpp -l bos.64bit
Werner

Crystal Report doesn't prompt for SAP credentials / errors out on refresh

2 Environments tested with same results:

BOE XI 3.1 SP2 & BOE XI 3.1 SP2 FP2.5 
SAP Intg Kit on mirrored SP/FP levels in each environment.

We've been successfully creating Crystal Reports against BEx queries in BW for months now as well as ECC master data. We've also built universes and have WebI reports actively working against similar BEx queries in the same. However, we're getting some curious behavior when we refresh the Crystal Reports against BEx queries in BW. Verified all necessary transports and authorizations have been provided for both authoring, as well as refreshing/viewing on demand, etc.

We've setup all the Crystal Reports we're testing to:

a) Use custom database logon information specified here. 
b) Specify a custom driver, leveraging the crdb_bwmdx driver 
c) Prompt the user for database login

We have not enabled SNC as of yet.

1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.

2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected

However:

3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:

Interactive Viewer: "Error in File %reportname%: Encapsulating Page Failed" 
Java Viewer: "Error in File %reportname%: Database Connection Error"

Nothing glaring in the event logs on the BO servers or in the Crystal logs that I can see, however just because it isn't spitting a specific error in the crystal logs doesn't mean I'm not missing something because I don't know what to look for behavior wise. To reduce the liklihood that it has to do with the way the report was built, we've tried against the same query by building a report using standard methods, as well as the SAP Toolbar using a very plain jane report. Same behavior.

Thoughts?
Edited by: Jay Riddle on Mar 1, 2010 8:55 PM

Hi,
1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.
>> Which authentication are you using to logon to InfoView ? Whats the configuration in the Universe Connection for Authentication ?
2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected
>> The user is using which authentication ? and against which system does he log on ?
However:
3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:
>> The user is using which authentication ? and against which system does he log on ?
>> You mentioned security restrictions and I assume we talk about BI authorizations in form of data level security. If so - does the BW query include the authorization variables ?
Ingo

About future for SAP XI?

Hi Experts,
Im new to SAP.
Im an MCA fresher and im planning to go for SAP XI training with my friend's suggestion.
Just i wanted to know the openings for XI and Future for XI.
Can i start my career as XI fresher?
what are the basic requirements i should have if i go for XI training?
Kindly do needful.
regards,
Arvind.

Hi Arvind Subramaniam ,
>>Can i start my career as XI fresher?
Yes. It is a good Netweaver technology & u can either try as a developer or at Admin side. But there r good oppurtinities as a XI Developer.
>>what are the basic requirements i should have if i go for XI training?
XI is configuration type & maximum stuff wil be mapping . But , sometimes there arises a need to import JAVA code into XI. Hence if u know JAVA/J2EE it's a added advantage.
All the best for u'r success in future!
These r some excellent websites on basics of XI which familarizes u with XI:
SAP Exchange Infrastructure 3.0 Integrating Heterogeneous Systems with Ease
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1ebea490-0201-0010-faad-a32dd753d009
SAP NetWeaver Technology Overview
http://www.gi-ev.de/regionalgruppen/aachen/vortraege/abstract/04/21-04.pdf
SAP NetWeaver Visual Composer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sdn-meets-labs-walldorf-05/sap%20netweaver%20visual%20composer%20in%202005.pdf
SAP Exchange Infrastructure for Developers ( This is an excellent website for free pdf book for XI)
http://www.sap-press.de/download/dateien/1191/sappress_exchange_infrastructure.pdf
Exchange Infrastructure : XI Transaction Codes
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xiTransactionCodes&
A Beginner's Guide to SAP XI Settings part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
A Beginner's Guide to SAP XI Settings part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
SAP XI AND SLD
http://www.sappro.com/downloads/nov06/XIandSLD.pdf
Exchange Infrastructure Learning Map
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/learning+map&
SAP Exchange Infrastructure eLearning Catalog(U wil get all downloads regarding XI starting from basics to end)
https://www.sdn.sap.com/irj/sdn/xi-elearning
All Articles on SAP NetWeaver Exchange Infrastructure(This website gives al articles on XI)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f04b44aa-fe06-2a10-859e-82ad4965781d?startindex=101 [original link is broken]
Mastering SAP Netweaver XI - Programming( PDF Book for XI)
http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
SAP XI Learning Guide
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html
SAP Exchange Infrastructure 2.0
http://www.sun.com/third-party/global/sap/collateral/SunSAPWP_final.pdf
http://help.sap.com/bp_bpmv130/Documentation/Planning/TechnicalInfrasture.pdf
Process Integration with SAP Netweaver new features and functions
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4042611d-04e5-2910-bd9d-f97627b1c164
SAP NetWeaver Process Integration 7.1 Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
End To End Process Integration Features in SP15 and higher incl. SAP NetWeaver 2004s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/54f20a2e-0801-0010-f787-87653d356508
cheers!
gyanaraj
****Pls reward points if u find this helpful

About Oracle for SAP.

hai,
For SAP we can use ordinary Oracle 8.1.7 ?
or for SAP, is there any seperate Oracle we have to use.
thanks in advance.

Ashok
SAP Uses Oracle database and it's regular Oracle only but version depends on SAP version.
Hope this helps
Thnaks
sat

About license for SAP JVM

My partner in China is look for alternate JVM to replace Oracle JVM in their solution.
They want to know the following thing about SAP JVM.
1.) Can SAP JAVA be opened to the third partner?
2.) Can the third partner can sell their solution ,which embedded with SAP JVM?
3.) Can SAP provide the relevant documents(include performance , interface and license authorized information)?

Hi Kevin,
it is only allowed to use the SAP JVM in combination with SAP Products.
For more information/details you can contact me directly.
Best regards,
Michael

OLE with c# for SAP AL - Error calling application via OLE GUIScanDoc

Hi,
I am creating a small scanning application which should be accessible from SAP. I read the documents from SAP side which says, we need to create an OLE 2.0 Enabled application. I created an OCX application in vb6 and configured with SAP. the call is going to my ocx application but dont know how to implement "GUIScanDoc @AID,N" in my application. I tried to create a function named GUIScanDoc () in ocx but getting the same error stating *"Error calling application via OLE GUIScanDoc".
If anyone has solution then plz plz help me out.
Thanks in advance.
P. Ramesh
Edited by: rapr04 on May 22, 2011 2:37 PM

I think you posted this in the wrong section of the forums, this area is just for SDK's relating to the BusinessObjects products.

Problem about Notification Order (SAP PM/CS)

I found problem in notification order have unit of breakdown duration is 'H'.
Could you help to find the way for chang to 'Min' unit?
In Notification Order . Can see in 'Malfunction' tab.

Please check the sales area in the notification and the contract.

Problem about checkbox for script generator

Hi friends,
I wish successes to everybody!
My question is such:
When i change the value of the following code (value="0") that is shown in the situation to checked
But when i click the submit button nothing is generated so how to get my page on checked state?
Program side:
List<ClassProperty> mainList = new ArrayList<ClassProperty>();
for (int i = 0; i < classPropertyList.size(); i++) {
ClassProperty classProperty = (ClassProperty) classPropertyList.get(i);
if (classProperty.getSelected() == 1) {
mainList.add(classProperty);
JSP page:
<html-el:checkbox name="scriptGeneratorForm"
property="classPropertyList[${ctr}].selected"
styleId="classPropertyList[${ctr}].selected" value="1"
tabindex="1"/>

thank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again.

A technique problem about integration on sap and pos equipment

hi~everyone
   I have two questions to need every's friend help.
   (1) I have some business data,i want to create the idoc file by ABAP and save
        the idoc file to application server.
   (2) The external system create a idoc file and send it to sap application server,
        i want to read the idoc file and create a invoice by idoc message .
I want to come true the function hereinbefore,what should i do ? give some code
   or cues please ,thank you evey much !

Hi,
IDOCs are used to direct communicate between two systems, sometime there may be a middleware(like XI) involved.
Why do you want to save the data to applications server then?
Regards,
Atish

ABAP for SAP HANA

Is there any difference in normal ABAP and ABAP for SAP HANA ? If yes , then please guide me how to proceed for learning ABAP for SAP HANA ?

Hi Ruchi,
There is a slight difference between ABAP and ABAP for HANA. If you are well aware of all ABAP concepts then you can easily understand the ABAP for HANA concepts.
Some of the differnce which I observed.
1. New syntax for Open SQL is introduced, which includes support for comma separated lists, enhanced string expressions, the definition of host variables in a more standard fashion, and fewer restrictions for joins.
eg: SELECT so.matnr, so.mtart FROM mara AS so INTO TABLE @it_mara UPTO 10 ROWS.
2.It uses the TOP DOWN approach so we can use HANA databases capabilities. you can get more information on this in this blog ABAP for HANA and "Code Push-Down"
3. CDS (Core Data Services) View, AMDP (ABAP managed database procedures) are again new features. Refer this document. http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b01089ed-dead-3110-f28e-caa12aeb5e27?QuickLink=index&…
Please go through this link It is helpful for you. https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0CCsQFjAD&url=http%3A%2F%2Fsapinsid…
If you want to learn more about ABAP for SAP HANA then please register for the self placed course on OPENSAP. Here is the link (ABAP Development for SAP HANA - Dr. Jasmin Gruschke and Jens Weiler). I have completed this course and it was very helpful for me to understand the concepts of ABAP for HANA, so I will suggest you to enroll for this course.
Hope this will help you.
Regards,
Sneha.

Error: There was a problem logging on to SAP BusinessObjects Enterprise

I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
   Unable to Logon
     There was a problem logging on to SAP BusinessObjects Enterprise.
       Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
       persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.

Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent.

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Problem about tdp for sap rman error

Similar Messages

Maybe you are looking for