Problem adding third party emails on replacement 9300

Hi, can anyone help?
I had a 9300 with an enterprise email plus I had a number of btconnect email accounts that I had successfully set up.
The phone became faulty and Vodfone replaced it with a new 9300 with Blackberry 6.0.
I have tried adding the btconnect accounts but without success.
I have gone through the usual email set up, have used the correct 'provide my own settings', I get a message that says the account has been set up and I also receive an email (on the pc) telling me that account is set up.
However, there are no mailbox icons on the BB for the new accounts and I do not receive any emails to the handset and obviously nor can I send them.
Any ideas? I have also ensured that my Outlook is configured to keep messages on the server.

donniezazen wrote:@Thaodan Is there any fix for it?
For now the only solution is to downgrade sip & pyqt4. kdebindings-python2 needs to be rebuilt but it doesn't build against sip 4.15:
https://bugs.kde.org/show_bug.cgi?id=323899

Similar Messages

  • Problem with 'third party email'

    I've just switched to bt broadband in the last 48 hours.  Since that time I have been trying to find the correct settings so that I can access my old freeserve email account using outlook.  Unfortunately I only seem to be able to find information and settings linked to authentication with a bt yahoo account.  This option is not available to me.  The only account I can and have opened is a bt mail account.   If there are definate instructions could somebody please tell me where they are?

    thanks for link.  Regret to say have looked at this a number of times.  Setting up incoming and outgoing servers as per these instructions simply seems that on testing neither server responds and times out.  The only way I have been able to get any form of activity is to set inocoming server to port 110 and outgoing server to 25 and not enable SSL.  Using these settings I can get a successful test of both incoming and outgoing servers. 
    Problem that remains is that while I can recieve incoming mail ok any message I try to send simply sits in the outbox regardless of the test saying its good to go.

  • How do I use Thunderbird to send third-party email through Verizon SMTP?

    What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
    Based on other posts, I have set:
    server name: outgoing.verizon.net
    port: 587
    CHECKED 'use name and password'
    username: entered verizon username
    use secure connection: 'no'
    When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

    Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Port 25/587 and third-party email account

    Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
    I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
    I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
    My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
    What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
    I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
    Thanks.
    Solved!
    Go to Solution.

    It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
    For the sake of example, we are going to pretend that we are setting up  your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The settings for using Verizon's servers would be:
    Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
    Reply Address: [email protected]
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
    Hope this helps. If you still have questions, please let me know.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Looking for a third party utility to replace a file's "modified Date" field

    For video files, apparently the organizer displays the thumbnails with the date taken from the file's "modified date" field. For some wierd reason (which I'm discussing with Adobe CS) the organizer changed the date of all my videos in the "modified date" field, so now the chronology of all my video clips in the organizer went down the drain.
    Is there a third party utility to replace the "modified date" field of a file with the original shot date? (which in W7 is shown in the "Date" field).
    In other words: for every video file in my library, I want to take the date from the "Date" field and put it in the "Modified Date" field
    Thanks for your help.

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • For third party email users

    AKA anything that isn't @verizon.net (ie @hotmail.com, @juno.com)
    Verizon is blocking port 25, please check: http://www22.verizon.com/ResidentialHelp/HighSpeed/General+Support/Top+Questions/QuestionsOne/124274...
    Reason:  Most common email viruses are sent using port 25 to infect computers. Often times the user never knows their computer has been infected. In order to protect our customers, Verizon has turned off the ability to send email using port 25 for all users other than those using a @verizon.net email address.
    They give some step by step instructions for anyone who are using a third party email here:  http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
    Just an FYI if your non Verizon email suddenly stops working in outlook, macmail etc.  Simply change the outgoing smtp port from 25 to 587.  You won't notice any difference.
    Just thought I'd give everyone a heads up if you didn't know about this.

    I have a non-verizon email account, and must run everything through the verizon server.  I have changed the smtp port to 587, I have it marked to authenticate. The outgoing server is smtp.vzwmail.net    I still cannot send email.  I can receive, but not send.  Can anyone help?

  • Does adding third party ram void the warranty?

    Will adding third party RAM, like Crucial, void the original Apple warranty or Apple Care warranty extension? Does the latency rate matter? Am adding a second stick of 512 mb ram to new iMac G5 (rev B actually). Is this ram ok for my iMac rev B as a second stick?
    "Crucial 512MB 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered System Memory Model CT6464Z40B"

    Adding third-party RAM to your machine won't void the warranty unless you damage the machine during the installation. That module matches the specifications your iMac calls for.
    (9216)

  • I took my iMac 2010 to a "Third Party" company to replace my hdd, they did, but now it will not boot. if i took this to the Apple store, how much would it cost to fix? if i buy my own SSD (£70) Thanks a LOT!

    I took my iMac 2010 to a "Third Party" company to replace my hdd, they did, but now it will not boot. if i took this to the Apple store, how much would it cost to fix? if i buy my own SSD (£70) Thanks a LOT!

    DewiRobbo wrote:
    Well, this "third party" is going to put my old hdd back and not charge me any money (as he did not fix it) but i think its better off taking it to an AASP because i have a feeling Apple store will charge way too much.
    The way I read that comment – you seem to suggest the Mac was broken before the third party replaced the disk - is that the case or was it working before the HD was replaced?
    Since the Mac is out of warranty you will have to pay for any repairs wherever you take it. Authorised Apple service centres will be able to get parts whereas any non certified technicians will have to use 'grey market' parts since Apple will not sell parts to the public. These may be reconditioned or not official parts - it's a risk to use them. Visit the Apple store & ask them - there is no point in lying about it being handled by a third party. An Apple tech may be able to tell when they open the case, depending on how meticulous your third party was. 
    If you are handy with a screwdriver & have tools and a lot of patience you could use a guide on iFixit.com, but there is no indication of why this Mac not booting up.
    It could be that the disk is not formatted correctly.
    Are you sure the tech copied an OS onto the disk? Did they install the OS for you or did they clone the old disk?
    Can you boot from a backup disk or from an install disk? Does the disk appear in Disk Utility when booted from another OS (either the installer or a backup).
    'Not booting' can mean so many things, what does booting do exactly? Grey screen, black screen, any noises or tones, any signs of life at all…?
    If you look at the iFixit guides you will see many fiddly connectors, if the tech failed to hook them all back up it could explain the failure, or perhaps you just have a disk that is 'dead on arrival' - sometimes that happens. A properly trained technician should be able to figure that one out.

  • Help!!! Entourage 08' At&t Uverse Third Party Email Setup

    I have a macbook and use Entourage 08' for my emails. I started a new job today and am trying to add my new work email address to entourage. I have tried everything, read every forum, and even my IT guy at work cannot figure it out. I can use either POP or IMAP and would prefer IMAP. How do I set up this new third party email because I have Uverse as my internet provider and do not want to pay the Techconnect fees? In the meantime, I am being forced to use webmail. Any thoughts or help at all?

    AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
    Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
    https://discussions.apple.com/message/22291865
    Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)  
    > click the gear at upper right of screen next to your name
    Navigate to Settings > Accounts > Add
    Add your non-AT&T mail accounts/  Enter info they require
    U-verse will send a verification email to those mail accounts.
    After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
    as you have Mail configured.

  • Third party email setup

    ice successfully setup a third party email account on my iPhone(IMAP),but my phone can only receive mail. Whenever I try to send an email, it says that connection to the outside server(send.Columbia.edu) has failed. Any idwas as to why my ipjone is having trouble connecting to the outside server?
    On a side note, is there an easy way to check how many txt msgs youve sent?

    If you are connecting via AT&T EDGE, the connection will seem to come from an outside network. Your outgoing mail server may be rejecting your attempts to use it from outside its network.
    You can use cwmx.com (no ID, no password) as the outgoing server. This will work whenever you are using EDGE to connect. However, this connection will not work if you connect to the internet using WiFi. AT&T's outgoing mail server does not allow you to connect to it from outside its network.
    You can also get a free GMail ID and use their outgoing server information. GMail's outgoing server works from both EDGE and any WiFi network. You will need to add you personal email ID as an authorized "Sent From" ID in the Settings section of the GMail web interface, and use the "Other" mail account shortcut on the iPhone to configure your account. You can specify your IMAP server as the incoming mail server and the GMail SMTP server as the outgoing server.

  • Sync third party email accounts to iOS

    Hello guys,
    does anybody know how to sync third party email accouns to ios since itunes can't do it? Is there an app for this? I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    pserik

    I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    That's the only way to do it.

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • SharePoint 2013 on-premises integration with third party email account

    the Email sending issue from SharePoint is causing too much time waste 
    First let me explain how our SharePoint is deployed
    Sharepoint version : 2013
    Deployment type : on-premise
    Authentication : from Domain controller also hosted locally 
    domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
    SharePoint computer name on local DNS :  sharepoint.domain.com
    OS and IIS : 2008 r2 , IIS 7.5 
    Network firewall : 25 26 ports  opened for sharepoint , both incoming and outgoing.
    Server firewall : turned off
    Email configuration Attempts by IIS 6.0 
    We tried following setting on IIS 6.0 SMTP local server properties
    In General tab
    qualified name was shown as : sharepoint.dts-solution.com
    IP assigned : sharepoint server IP  , advanced putted two entries of IP with ports as 25,26
    In Access tab
    Authentication : selected as Anonymous 
    Connection : All except below list : empty list
    Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
    in Delivery tab
    outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working 
    outbound connection: all default values and port = 25
    Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked 
    On sharepoint central management settings
    Outbound email = sharepoint.domain.com
    from and reply to address = [email protected] 
    IIS 7.5 SMTP settings 
    In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port  .
    Godaddy account 
    Our website hosted on godaddy with same name as domain.com
    open relay not possible on emails.
    Results
    After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
    success. 
    Tech Learner

    Hi,
    As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
    From SharePoint side, I'd suggest you refer to the link below to configure email integration:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
    I'd recommend you contact their support engineer for more assistance:
    https://support.godaddy.com/help/category/154/email
    https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
    Thanks for the understanding.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Third-party hard drive replacement

    I want to upgrade the hard drive in my ca. March 2006 MacBook Pro (2.0 GHz) with something bigger than the original 100 GB Seagate that came in it. I have looked online at the various places that offer directions for doing this yourself and, frankly, don't feel comfortable trying this myself. Because I live in a rural area, I am not close to any Apple Authorized Repair Centers, and so I would like to send it off to have the hard drive replaced. I had good luck in the past with iResQ (they fixed a dead Titanium PowerBook that I used before I got this MBP) and I have seen a few other places online.
    I would appreciate hearing from anyone with first-hand experience with any of these third-party places doing hard drive replacement. Any and all comments (or suggestions - except telling me that I can do it myself) will be appreciated.
    Thanks in advance.

    Quite true--I should have phrased that more along the lines that you risk voiding your warranty if a non- Apple authorized person does the repair. I believe that if an Apple authorized repair person inflicts damage while in the computer, Apple will still honor the warranty because the damage was done by someone that they authorized to do the work. If someone unauthorized does the work, there is always the possibility that some future problem may be blamed on the unauthorized work and won't be covered. And if the unauthorized person causes actual damage, you're on your own, for that damage anyway. Applecare should still cover something totally unrelated.
    The one thing that does change is that the new drive itself will not be covered by Applecare any more. However, it will be covered by the manufacturer's own warranty, which is usually 3-5 years. Everything else in the machine should still be covered by Applecare.

  • Problems with third party package and file access

    I am using a third party package that allows me to decode
    multipart forms that I use to upload files to our server.
    I have been able to write my own code (JSP) that both reads and
    writes to our filesystem. However, when I try to upload a file
    using the third party package the method I am using fails with
    the following IO exception: The error message is "access is
    denied." But the files get written and are usable (even binary
    files). I have checked the directories and all the dirs I am
    writing to have read, write and execute permission.
    I have access to the code so when I duplicate the actual
    methods used for writing (FileOutputStream.write(foo)) in my
    JSP, it writes fine without exceptions. In fact, I use
    FileOutputStream.write() in other code and it works fine. My
    question is: why would FileOutputStream work in packages we have
    developed and not in a third-party package. I have added the
    codebase and filePermissions to <weblogic_home>\weblogic.policy
    without any changes.
    I am running WLS 5.1 and NT 4.0 with SP5.
    Does this problem sound familiar to anyone?
    thanks for any and all help,
    saulj

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

Maybe you are looking for