Problem after starting OracleMSCSService on standby system

Hello All,
Platform : Windows-2008Server 32 bit,Oracle10gStandard,OracleFS 3.4
I have two cluster nodes with Microsoft clustering and Oracle Fail Safe. All my services were up and running on primary node but the OracleMSCSService was offline on the standby Node.
Now I want to know, If I manually start OracleMSCSService on the node which is standby at that time, does this cause Fail over to happen (i.e. Switching resources and services from primary node to standby node).
I encountered the following errors and failover happened when I started the OracleMSCSService on the Standby node
Error 1) Is alive poll failed on resource OracleOraDb10g_home1TNSListenerFslnjseprdb with error code 1
Error 2) Error bringing resource OracleOraDb10g_home1TNSListenerFslnjseprdb online with error code 10066.
I am trying to understand what went wrong and why did Failover happen after my above action?
Edited by: user5865877 on Mar 4, 2010 7:27 AM

Any idea on this buddies, haven't anybody is using Oracle Fail Safe
Edited by: user5865877 on Mar 4, 2010 8:13 PM

Similar Messages

No connection after starting or restarting the system

Hi,
I have a problem.
There is no internet connection after start or restart.
Until last week there had been no problems. There was an automatic connection with my SPEEDTOUCH9FF4D8.
But suddenly it does not connect automaticly. I can select SPEEDTOUCH manualy and than it works...
Thank you for your answers.
Mac Book Mac OS X (10.4.10)

Hi im slightly confused by your post whether its the computer not connecting to the network automatically or whether there is no internet connection to the router at all but heres a few things to try anyway!
First of all, if the internet goes down and restarting the router doesn't solve, then unplug your cable modem for at least 5 mins, the cable modem needs to forget the MAC address of the previously plugged in device. Then start it up and when the ready lights are on the router (or about a minute after starting the router) then plug in the router and the connection should work!
Secondly, if your computer doesn't automatically connect to the network anymore (presumably your on mac osx) then go to System Preferences / Network then select configure AirPort. Make sure 'By Default, join' is Automatic, then go to options at the bottom and select 'Automatically Join and Open Network'
Hope this helps!

Num lock problems after start

I have just startet my HP Pavilion 500-106eo today with windows 8.1. The problem is, that num lock is off after start and restart, and bios is set correctly to on and value in H-key is 2 ( num lock on after start) I have tried to shut down fast start up and it didn't work either. I can manually set num lock on after start....Help me solve this issue, please.
This question was solved.
View Solution.

Eskil4930, welcome to the forum.
The reason that you can't change "fast startup" is because you have to click on the phrase at the top of the page "Change settings that are currently unavailable". Once you click on it the settings that you weren't able to change will become available. Uncheck "Turn on fast startup (recommended) and close the Control Panel and restart the computer.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problems after starting the Enterprise Manager agent

Hello,
I have a problem, the agent of the enterprise manager does not start, do not know how I can do to reinstall the agent, in executing the command emctl start agent, inevitably show that the agent can not be started, I've done many things and not know what else can do, I have the version oracle 10gR2 10.2.0.5.0 on AIX 6.1, additionally do not know what operating system processes or daemons must be up to work.
thanks for the help you can give me

Look, this is the result of instructions:
[saray]]/etc/rc.d]>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log
[saray]]/etc/rc.d]>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log
[saray]]/etc/rc.d]>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
ps: invalid list with -o.
ps: illegal option -- -
Usage: ps [-ANPaedfklmMZ] [-n namelist] [-F Format] [-o specifier[=header],...]
[-p proclist][-G|-g grouplist] [-t termlist] [-U|-u userlist] [-c classlist] [ -T pid] [ -L pidlist]
[-@ [wparname] ]
Usage: ps [aceglnsuvwxX] [t tty] [ProcessNumber]
Starting Oracle Enterprise Manager 10g Database Control .... started.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log

Problem after rename datafile belongs to SYSTEM tablespace

Hi
I've renamed one file belongs to SYSTEM tablespace.
Then I brought database online and dropped the old file, now I can open database,
but I can't run backup.
I delete previous one so I can't restore that file from backup, I have the file because I clonned db,
but when I restore file and run recover from RMAN database got recovered.
After that I still can't run backup.
Do you have idea what to do???
SYS@orcl >select * from v$recover_file;
FILE# ONLINE ONLINE_
ERROR CHANGE#
TIME
14 OFFLINE OFFLINE
OFFLINE NORMAL 0

RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 500 SYSTEM YES /u01/app/oracle/oradata/ORCL/datafile/o1_mf_system_48fprop3_.dbf
2 245 UNDOTBS1 YES /u01/app/oracle/oradata/ORCL/datafile/o1_mf_undotbs1_48fprovo_.dbf
3 260 SYSAUX NO /u01/app/oracle/oradata/ORCL/datafile/o1_mf_sysaux_48fpropg_.dbf
4 40 USERS NO /u01/app/oracle/oradata/ORCL/datafile/o1_mf_users_48fprowb_.dbf
5 100 EXAMPLE NO /u01/app/oracle/oradata/ORCL/datafile/o1_mf_example_48fpw04c_.dbf
6 100 DBA1 NO /u01/app/oracle/oradata/ORCL/datafile/dba1.dbf
7 5 TEST NO /u01/app/oracle/oradata/ORCL/datafile/test_reorg0
9 10 UNDO1 YES /u01/app/oracle/oradata/ORCL/datafile/undo01.dbf
10 10 VAL NO /u01/app/oracle/oradata/ORCL/datafile/val.dbf
11 100 INVENTORY NO /u01/app/oracle/oradata/ORCL/datafile/o1_mf_inventor_4tts3q24_.dbf
14 260 SYSAUX NO /u01/app/oracle/oradata/o2_mf_sysaux_48fpropg_.dbf
15 500 SYSTEM YES /u01/app/oracle/oradata/ORCL/datafile/o2_mf_system_48fprop3_.dbf
17 100 RCVCAT NO /u01/app/oracle/oradata/ORCL/datafile/rcvcat01.dbf
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 61 TEMP 32767 /u01/app/oracle/oradata/ORCL/datafile/o1_mf_temp_48fpvnpt_.tmp

Problems after Starting in Safe Mode

I booted my computer up in safe mode in order to resolve a separate software issue. When I restarted my computer, I got to the blue screen with the apple logo and the spinning progress icon, and it just stays there for about a minute and shuts down again. Now I can't get past this screen no matter what I do. I tried holding down shift for safe mode again with no luck.
Any suggestions would be greatly appreciated.

Try resetting PRAM:
Restart Mac while holding down "option/alt", "command", "P", "R" (all 4). Keep all 4 keys depressed until the audio signal is heard 2 times (some say 3). Hopefully, this may solve your problem.

Problem after starting

Hello i have a macbook pro 13 inch from end of 2010 and sometime when i start my laptop and when the desktop apear evrithing is locked, i see my desktop but i can t use nothing, so i have to force the shutdown and restart until evrything ok.
Do someone know why sometime this thing happens
Exuse my french but i try to do my best in english
Fred

Any idea on this buddies, haven't anybody is using Oracle Fail Safe
Edited by: user5865877 on Mar 4, 2010 8:13 PM

After downloading the new operating system on my iPhone I am having problems connecting to my email.

Can anyone help with connecting to email problems after downloading the new operating system on my iPhone 4?

did you find a solution for this?

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

BO Edge Cold Standby System

Theoretically, if I create a cold standby BO Edge system that remains off unless the primary system goes down, will pointing it to the (1) primary filestore (I/O FRS') and (2) primary CMS system & audit databases (SQL 2005) cause any problems so long as the standby system isn't running at the same time as the primary system?
In a scenario where there aren't any continuously or regularly mirrored copies of these databases, and only the backups (*.bak), this would be in order to avoid having the additional manual process of restoring the backups to a secondary system and audit databases before switching on the standby BO Edge system.
So long as there is a network available backup of the filestore available, I could point the standby system to that filestore -- but unless the system & audit DB is backed up at the same time I'm fearful of synchronization issues.

This is allowed in the sense that (installing a cold standby, using a Production key) is not expressly forbidden in the license. That said, you could always remove the key from the stand by server once BO Edge is installed and configured, add the key when your primary server goes down.
The license is [here|http://www.businessobjects.com/pdf/products/licenses/description_product_use_rights.pdf]

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion?

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?

No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD?

Hi, I got a big problem. I restored my mac and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my CD, and I don't have an ID with lion purchased

Hi, I got a big problem. I restored my macbook pro and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my installing CD, and I don't have an ID with lion purchased, so what should I do? Do you sell the system software?

This is a user forum; we're not  Apple.
Please contact the Apple Support folks directly for issues related to hardware and software purchases.
The particular model of MacBook Pro is a key detail here, as the Mac model will determine the oldest version it can boot, as well as whether it'll boot more current software.
AFAIK there is and was no Lion installer DVD available. It was a download. AFAIK, the last DVDs commonly available were for Snow Leopard 10.6. Snow Leopard DVDs are still available in the Apple online store in various countries, if your MacBook Pro is old enough to be able to boot that version.
If your MacBook Pro purchase with Lion wasn't registered with Apple, then you'll have to discuss this directly with the Apple Support folks, or repurchase Lion from the Mac App Store (which will usually involve a call to Apple for a redemption code as it's old software), or you'll "purchase" (it's free) Mavericks OS X 10.9 and wipe and install that assuming your MacBook Pro supports Mavericks. If you didn't purchase the MacBook Pro from Apple (and it was shipped with an older release), then you'll end up acquiring a redemption code from Apple for Lion, or installing Mavericks.
For completeness and given you're probably already aware of this, the usual approach for restoration with recent OS X versions is via the recovery boot (more details). If the disk is wiped and you can't get Lion, then you'll probably end up reinstalling with Target Disk Mode using another Mac with a compatible FireWire or Thunderbolt port and a cable. Or visit the local Apple Store.
sputniki: Once OS X 10.7 or 10.9 has been reinstalled, yes, getting Time Machine configured and going is undoubtedly on the agenda. But had there been a viable backup here, I expect jianghua would have used it.

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Logical standby Slow after starting auditing

Hi:
I have logical standby, which was keeping with the primary database, then we started auditing on the primary database(Database auditing.) , After starting auditing my Logical standby not keeping with primary, after doing reasearch we found out that there are so many sql statement from sys schema on AUD$ table, and they are doing full tablescan on it, which is of 3GB as off now. Also This table is own by sys and by default all sys objects should be excluded from logical standby apply. But this is not, when I tryed to skip it by my self, then apply process gives ora-600 and stops.
I think it is a bug or what ???
Any help on this will be appriciated.
Regards
Bhushan

Hi Guys:
After taking my time we decided to truncate the sys.AUD$ on the LOGICAL STANDBY and that solved our problem.Now LS is catching up fast as I can see the progree is verry fast.
Still if anybody from "ORACLE CORP" is reading this thread they should give us the reason why the sys.aud$ table is beging replicated on the LOGICAL STANDBY site. is this a BUG in oracle?
Regards
Bhushan

Possible to start MXI-3/PXI system after PC booted?

Hi,
I'm new here, so I just asked this question in another thread through a reply. I didn't notice that it was already marked as solved, so I'm going to ask again in my own thread.
My problem may seem very related to the one of Kobi, but there are some differences which are holding my hopes up that the problem could be solved. The system setup summarized:
- PC (MXI-3)
->PXI1002 (Chassis1)
   ->PXI8335 (port1 - in)
   ->PXI8335 (port2 - out)
   ->PXI5122 (measurement)
     ->PXI1002 (Chassis2)
      ->PXI8335 (port1 - in)
      ->PXI5122 (measurement)
The aim is, as it is easily guessed, to be able to start the additional measurement devices at any time, even while the pc is already running.
The situation differs to Kobis' in one specific point: in my case the cards and all the equipment is at all times visible in MAX, even though I startet it after the pc booted. What does change is the pattern of the leds, and that the PXI cards don't pass the self test in MAX. The following screenshot shows the konfiguration of the system how it is observed after both ways of starting the complete system (pc first or PXI first).
(Even though I'm using an english labview version my MAX partialy remains german, I hope this is no problem.)
I tried to identify the PXI system and chassis, but couldn't get a different result. The NIscope VIs are orderly initialising and resetting all the sessions, but only if I switch on the PXI systems first.
So what do you think, could it be possible to achieve the goal of making it work, or should i stick to booting the pc after switching on the PXIs? I did some research and I know, that the installation guides do specify the order of switching the devices on, but I thought that this was only meant for installation/first run.
I would be really thankfull for any advice in this.
Regards
Max1744
Solved!
Go to Solution.

Hi Max,
there is no way around to first start the PXI. You always have to start the PXI System an d then the PC.
regards
Tobias

Problem after starting OracleMSCSService on standby system

Similar Messages

Maybe you are looking for