Problem at installation FixPack 3.3 on BOE XI 3.1 SP3
Hi Colleagues.
When I try to install FixPack 3.3 on BOE XI 3.1 SP3, I have a problem-progress of installation is stoped on 17% in phase "Running Post Install Actions".
You can see the last strings in setup's log file (BusinessObjects_FP_3_3.12.3.log):
========================================================================
====== [1294737999] Running Post Install Actions
========================================================================
========= [1294737999] doInstallAction: PostInstall
[info] Action type: 'Perl', source: '/sapboe//setup/InstallActions/BOBJInitAudit.pm', target: 'StopSIA'
=== [1294737999] Begin: Execution of function StopSIA from perl module /sapboe//setup/InstallActions/BOBJInitAudit.pm
[info] Stopping SIA
=== [1294737999] Begin: /sapboe/bobje/ccm.sh -stop all 2>&1
[info] Working directory: /sapboe/setup/Installer
I think installation process could't to stop SIA and therefore could't go to next phase of installation.
OS is HP-UX v.11. Also I have a installed BOE XI 3.1 SP3. User for BOE in UNIX is "boeadm".
I started installation by root. Maybe the problem in this?
Maybe I should was to start installation by user "boeadm"?
Please help..
thanks®ards,
Yessen
Well to answer my own question it looks like you do need to run the repair as the same user that did the original install.
/srv/sap/sap_bobj/ccm.sh -stop all 2>&1
Warning: This product was installed under username: sap-cr
Current username is:
Press Enter to continue...
After running as the correct user I get this:
/srv/sap/sap_bobj/ccm.sh -stop all 2>&1
Stopping all...
Stopping server_name
Similar Messages
-
Problem with installation CF7 on W2K3
//Original message //
Здравствуйте,
отдел
поддержки
Macromedia(Adobe). //
// Проблема:
При
установке
ColdFusion MX 7 на
операционную
систему Windows 2003
Server на //
// любой
web-сервер
(пробовал
на Apache и на IIS) в
лог-файле
следующее: //
// Installation: Successful with errors. //
// 1736 SUCCESSES //
// 0 WARNINGS //
// 1 NONFATAL ERRORS //
// 0 FATAL ERRORS //
// Web Server Connector Configuration Error //
// Status: ERROR //
// Additional Notes: ERROR - JNDI port 2920 for server
coldfusion//
// is not active //
// Раньше у
меня
программа
была уже
установлена
на Windows Server 2003, но
произошла //
// какая-то
ошибка и
после я
переустанавливал
и
программу
и OS - никаких
результатов.
// Может
быть
необходимы
какие-нибудь
настройки? //
// ColdFusion
устанавливался
на чистую OS
без
каких-нибудь
программ.
Без
файрволла
и //
брандмауэра.
На windows XP
ставится
отлично,
без ошибок.
// Если ColdFusion не
поддерживается
на Windows Server 2003,
тогда
почему
раньше он //
// работал? //
// C глубоким
уважением
всем
сотрудникам
Macromedia и Adobe,
Шильдяков
Алексей из
России. //
// [email protected] //
// Translated message //
// Hello, a department of support Macromedia (Adobe). //
// Problem: At installation ColdFusion MX 7 on operational
system Windows 2003 Server on //
// any web-server (tried on Apache and on IIS) in a log-file
the following: //
// Installation: Successful with errors. //
// 1736 SUCCESSES //
// 0 WARNINGS //
// 1 NONFATAL ERRORS //
// 0 FATAL ERRORS //
// Web Server Connector Configuration Error //
// Status: ERROR //
// Additional Notes: ERROR - JNDI port 2920 for server
coldfusion//
// is not active //
// Earlier at me the program was already established on
Windows Server 2003, but //
// there was any mistake and the ambassador I reinstalled
also the program and OS - //
// nothing results. It can be necessary any adjustments? //
// ColdFusion it was established on pure(clean) OS without
any programs. Without //
// firewall and a fireproof wall. On windows XP it is put
perfectly, without mistakes. //
// If ColdFusion it is not supported on Windows Server 2003
then why earlier it(he) //
// worked? //
// Deep respect to all employees Macromedia and Adobe,
Shil'djakov Alexey from Russia. //
// [email protected] //
// translated by X-Translator of PROMPT:
http://www.prompt.ru and online
translate in //
http://www.translate.ru //
//// Sorry for possible mistakes while translating ////
///// [email protected] /////quote:
Originally posted by:
<newbie />
Make sure IIS and CF is running and then run wsconfig.jar to
configure
IIS. Do a search on your hard-drive(s) to see if this jar is
exists. Traverse
to that directory using a command prompt and type:
prompt>java -jar wsconfig.jar
I installed Apache Server 2 and uninstalling IIS. Why I doing
that CF will work in Apache2 -
Problem with installation on PIV
I have a problem with installation Oracle 9.0.1 database on my
RedHat 7.1 and 7.2 dist.
My machine is PIV 1.4/768MB/40Gb
On PIII 933/786/40 everethin works fine.
Where is solution for my problem ??Hello,
PIV isn't problem on Linux. (I am tried)
What is your problem ?
regards
peco -
Problem with installation - Augigy
I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
Help?same problem here, is there a possibility zu force installation?
-
Problem on installation of linux through the vmware software on compaq CQ60
Problem on installation of linux through the vmware software on xp operating system. My laptop is Compac CQ60.
The error message is no device found compatable for the installation.user12190571 wrote:
The error message is no device found compatable for the installation.The question after this kind of information is usually : What is the exact error you got, from who and when you were doing what. -
I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?
You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html -
Problem with installation and activation
Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>> -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
Problems with installation on Windows XP Pro with SP1
Hi! I've two problems during installation.
I try to install Oracle 10g Enterprise
First:
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Second:
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckServicePack' from ruleset 'ServicePackChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczServicePackChecks.checkServicePack' has thrown an unhandled exception [For input string: "Pac"]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Install the recommended Service Pack.
What I should to do?
Message was edited by:
user465581Hey Guys,
I am Srinivas Here who had been trying to install Oracle Database 10G on Windows X86 on Windows XP Professional.
If you have Win-XP Professional as your Operating System. Do not download the oracle Database using windows - XP Professional because XP will block certain installation files while downloading. In your machine install Windows 2000 or any other Windows version as a dual boot. First the download Database Zip files using your other version of Windows Operating system and then when you Unzip the files it will create a folder called Database and all the files will be present in it.If you want to store the same to cd for having to install the 10G Rel 2 database through CD then copy the contents of the unzipped database folder and store only the contents of the database folder and write them to CD's. Please see to it that while writing on cd's do not copy the folder itself .
After this, restart the system and get into windows XP Professional (Your XP Professional should be with Service Pack 2 in order to install 10G Database on windows XP - The Basic requirements for Oracle Database 10G on Windows X86).
I request you to check the software and hardware requirements from oracle Documents before you install the Oracle Database 10G on Windows x86 as well as Oracle Database 10G on Linux X86 or any other operating systems.
Finally, After you run the Oracle Universal installer in the last you will get messages for all products installed Success and finally it will ask the password for DBA and open the password management and give the password and reenter password and on the left you will have to unlock the items you would like to use.
In the last it will give you various URL links for Isqlplus, DBA, Enterprise Manager and a log report stored into oracle directory stored in your C:\Program files\Oracle folders. The correct link will be given at the end and you will have to watch the installation carefully.You can find DBCA and other options working. Try login in to Oracle through Command prompt, Sqlplus prompt availabe in Start ->Programs->Orahome10G->application Development-sqlplus as well as login through isqlplus link- Before this you should login at the command prompt as SYSDBA. YOU CAN SEE THAT YOUR DATABASE IS NOW WORKING IN WINDOWS XP PROFESSIONAL.
THANKS IN ADVANCE TO ALL FORUM MEMBERS WHO GAVE ME IDEA AND SUPPORT
REGARDS,
SRINIVAS -
Problem with installation of Adobe Air 2.6
Hi,
I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
[Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
[setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
[setup:11894][INFO] Commandline is:
[setup:11894][INFO] No installed runtime detected
[setup:11894][INFO] Relaunching with elevation
[setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
[setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
[setup:11894][ERR] Runtime Installer end with exit code 7
How can I solve this problem? Thanks in advance for help.I'm not certain that Mageia 2 Linux is supported. This Release Notes page and this Install Help page don't mention Mageia, just
Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
Roy -
Problem during installation of oacle patchset 10.2.0.2
I am facing the following problem during installation of oracle patchset 10.2.0.2 with SAP SRM 3.0 (with EBP 4.0) on HP-UX IA64. Already my system has oracle patchset 9.2.0.7 installed. Experts' opinion required urgently please..
prompt> ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1796 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_01-40-53PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-14_01-40-53PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
prompt>hi ben. I ran the runinstaller with the debug option. This is what it gave: (might be helpful for your analysis of the problem)
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1684 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_07 -42-47PM. Please wait ...unzip: cannot find ../stage/102_64/Components/oracle.s wd.jre/1.4.2.7.0/1/DataFiles/.jar, ../stage/102_64/Components/oracle.swd.jre/1. 4.2.7.0/1/DataFiles/.jar.zip or ../stage/102_64/Components/oracle.swd.jre/1.4.2 .7.0/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-14_07-42-47PM. Please ensur e that this directory is writable and has atleast 69 MB of disk space. Installat ion cannot continue.
: Error 0 -
Hello everyone!
I've a problem during installation of Itunes 10.7 on Window 7 x64. I had installed v11 but i don't like it, so i've uninstalled correctly this version and i have downloaded v10.7
The message, translated in english, is:
UNKNOWN \ Components \ ... \ 2B0163E6D0340BE2758E9BEDD8.
Make sure you have sufficient access to that key, or contact your support staff.
I don't know how to do...I don't want to format my pc
I have already tried to erase all the "apple" folders on directory C:\, but nothing to do...
Is there anybody that can help a poor italian boy, please?
Thanks a lot,
TeoThx Polydorus!
this evening i'll try and i'll tell you if it works!
Teo -
Problem during installation of EHP4 on IDES with preinstalled EHP3
I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need helpWhen checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis -
Problem in installation of Oracle Express
I have problem in installation of Oracle Express 6
My problem is that when i click the setup file it doesnt go anyfurther and the computer does not hang even.And even if i try to run the setup file again i get the same response.
i am installing all this on Windows Server 2000.
Can anyone help me.It's rare to get apps assistance in the database forum. You might have better luck going to 'http://forums.oracle.com' and asking in the appropriate foum. Look for
E-Business Suite
Applications Technology
* • XML Publisher
* • Managing Oracle Applications
* • OA Framework
* • Install and Upgrade <-------
* • More... -
Hey, I had met a problem with installation. Can any one help me?
Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ThanksRe: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!
Maybe you are looking for
-
Crystal reports- Calculation between two reports
Hi Experts I have designed a sales and purchase transaction report using crystal reports and i have designed another report for accounting transactions like Excise Duty payable and receivables, Vat payable and receivables, Expenses(like EB, Maintenan
-
Fnd_profile.value('user_id')
hello Guys, In the APPS customized form, I have one column which stores the fnd_profile.value('user_id') , on the basis of this user_id , i need to retrieve the employee ID which is linked with this user_id. any tip how can i get this? Regards
-
I uploaded the newest version and itunes stopped working!
I uploaded the newest version and itunes stopped working! This on my windows computer at home, can anyone help? Sorry, by not working I mean I click on the icon and itunes starts up - shows me the library screen with all my music on it, says acces
-
Identify material ledger activation
hi, how to identify material ledger activation date through document. regards. Lodhi.S
-
Why does my camera connection kit not work with my ipad 1 after updating on ios 5?
Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?