Problem: BlackBerry Maps

Hi,
I´m Giulia and I've a BB Curve 9320.
I can't use BlackBerry Maps: I'm not able to see the map!
Help me, please!

Hi ! Try to upgrade the OS, or which package do you use? BIS or BES?
Please give me +like, very helpful for me

Similar Messages

Problem loading BlackBerry maps

Hi.
I've only just bought my 8800 and it's driving me crazy. It was supposed to be loaded with the maps, but wasn't. I tried downloading them from the BB website, but got the message that no BlackBerry device was found. This was despite the desktop manager telling me that I was connected. After trying different USB ports on the computer and still getting no success, I tried the same thing on my laptop. I again received the same message that no BlackBerry device could be found, even though the desktop manager was again telling me that I was connected.
What do I do? Please help.

Hi,
The Blackberry Maps program only works in certain countries - other countries just show a blank "green/grey" screen. if you zoom out to max you can se the map of the world...
To download maps, you need to have a Working Blackberry Data connection.
Do you get emails to the handset using BIS or BES?
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

BlackBerry Maps on Torch 9810

I just upgraded from a Torch 9800 to Torch 9810. When I open BlackBerry Maps I shows my current location but the BB button the return key don't do anything. On the touch screen the search and Get directions don't do anything either. I uninstalled the app and reinstalled it using BB Desktop and it is the same no change. The only thing I can do is press hang up to get out of the app. But the app stays active. I can see it on switch applications and there is no way to close it.
Has anyone else had this problem?

I'm not sure if that's a common problem or not but because it's obviously a software glitch, you should try a battery pull if you haven't already. Battery pulls are recommended quite often in these forums because they do wonders at solving many minor issues. So with your phone powered on, go ahead and remove your battery. You can then put it back in a few seconds later.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

My BB CUrve 9320 are not support Blackberry Map(GPS)

Why I can't open Blackberry Map(GPS) in my BB Curve 9320?

kyachinumog wrote : yes i am from India..n its Airtel India...so can i know when India people get BB map service...why india r negleted ? Hi kyachinumog No I sorry but you are mistaken ! RIM never neglected India or any Asian country ,Infact they are doing much more for us as compared to America or Europe. Regarding the support for BlackBerry Maps questions have been raised regularly. As it an Open Forums I don't want to explain all the facts but certain policies of Our Government restricting those Services in India and a few neighboring countries.I hope you understand. Prince____________________________________________________________________________ Click " Like " if you want to Thank someone.If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

No tengo Blackberry Maps en Curve 9380

Hola tengo un problema con mi Curve 9380, cuando lo compre ya de fabrica no me vino con el Blackberry Mapas, y tampoco me deja instalarlo mediante Blackberry World ya que "no tiene los requerimientos nesesarios".. Si me pudieran dar una respuesta..
Gracias.

Estimado Usuario, lamentablemente este foro es solo para el idioma Ingles, sin embargo lo podemos ayudar en el foro especializado en Español, esta es la dirección donde gustosamente lo podemos atender:
http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
Muchas gracias
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry Maps Search

Why does BlackBerry Maps search work so poorly? I type in something I want to find and items hundreds of km or miles show up before the results around me, even when the local results are exact matches.

I have not had this problem yet.
Their is a new update that was released today for blackberry maps.
"version: 10.1.0.790
See if its available to download yet in your blackberry app. if not probably give 24-48 hours for server to get updated.
It might help fix your issue.

How to get the official blackberry maps

Hey guys i was deleting some apps from blackberry bold 9650 and i deleted blackberry maps by misstake is there any way to get back if you do know how to get back pls send a link replys thank you.

Hi reynardo
Try this link to download BlackBerry maps : BlackBerry Maps.
God luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

BlackBerry Z10 STL100-1 update Blackberry Maps 10.1.0.805 install failed

Device: BlackBerry Z10
Model: STL100-1
Software Release: 10.1.0.273
OS Version: 10.1.0.1720
Carrier: Beeline KZ
Country: Kazakhstan
1. Update for BlackBerry Maps downloaded but not installed. What may be the problem?
2. Maps are not available for Kazakhstan now. When do you plan to run the support of this country?
Solved!
Go to Solution.

Recently there was a problem with an update of Maps. Maybe they haven't sorted yet. It would install and then crash. I always end up buying an after-market map system that runs on GPS using maps on board the SD card. Interesting, I'm going to Kazakhstan next month. How's the weather in September?

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
   xmlns:xsd="http://www.w3.org/2001/XMLSchema"    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
    <Envelope>
     <Body>
       <Complaint_Request> (My previous message Type)
        <caseNo>
        <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

Problem in mapping remoteobject on server side

Hello all
I am trying to use remoteobjects in Flex and PHP via Zend_AMF. I am having problem in mapping the data object in flex with the one in PHP.
Here's my code....
private function getAuthors(event:Event):void
     serviceRO = new RemoteObject();
     serviceRO.endpoint = "http://localhost/sampleproj/public/";
     serviceRO.destination = "zend";
     serviceRO.source = "MyService";
     serviceRO.addEventListener(FaultEvent.FAULT, faultListener);
     serviceRO.getData.addEventListener(ResultEvent.RESULT, resultListener);
Now, here's the server side directory structure that works for me....
webroot
+ sampleproj
++ public
+++ index.php (index file for the webapp)
+++ MyService.php (this is the service class)
+++ VOAuthor.php (this is the Value Object class)
Since the index file, and the service file and value object are all in same directory, it works.
This is what DOESN'T work....
webroot
+ sampleproj
++ services
+++ MyService.php (this is the service class)
++ vos
+++ VOAuthor.php (this is the Value Object class)
++ public
+++ index.php (index file for the webapp)
The error that I get is:
Channel.Connect.Failed error
Here's little of something that's going on in index.php
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
require_once ( realpath(dirname(__FILE__) . '/../services/MyService.php') );
$server = new Zend_Amf_Server();
$server->setClass("MyService"); // adding the class to AMF server
$server->setClassMap("VOAuthor", "VOAuthor"); // mapping the ActionScript VO to PHP VO
echo($server->handle());
?>
My guess is that in ActionScript code I have to do something with RemoteObject's endpoint.
Can anybody please help me out with this?
Thanks and Regards
ShiVik

The problem turned out to be in the php code.
Here's how I changed it
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
$server = new Zend_Amf_Server();
// the following methods provide the lazy loading of services and value objects
$server->addDirectory( realpath(dirname(__FILE__) . "/../services/") );
$server->addDirectory( realpath(dirname(__FILE__) . "/../vos/") );
echo($server->handle());
?>
Earlier I wasn't taking into account the change of directories for service and value object files.
Thanks and Regards
ShiVik

Problem in mapping with multiple values

Hi all,
I am facing a problem during mapping. I am explainning the problem with a example.
Suppose i have a source table named Employee which has two columns emp no and account no. I have a target table Emp_account which has also the same columns.
One employee may have more than one accounts. In source table this account nos are stored in account no column in one row corresponding to emp no. The multiple values in account no are separated by comma for one record in source table.
But in the target table Emp_account a single record will be inserted for each employee's separate account. There should not be multiple values separated by comma in account no column of target table.
So if any employee has two accounts this will be stored as one row in source table but in target table it will divided into two different rows for each account.
EMPLOYEE(Source)
emp no account no
10 101, 102
EMP_ACCOUNT(Target)
emp no account no
10 101
10 102
Think I explained the requirement.. How can i made this in OWB mapping editor..Is it possible?...Can any operator perform this task...If any of u know about this plzz give some solution..It's very important ..
Thanks & Regards,
Sumanta Das

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

Problem in mapping after migration from 3.x to 7.x infosource

HI Experts,
I have a problem while mapping the data source 2lis_03_bf to info cube 0ic_cs01.
we have a flow like this now after migration done.
Datasource->transfer rules->infosource->transformation->info cube
Now we dont require infosource and its respetive transformation, we are going to map directly from data source to info cube.but we have routines available in info cube related transformation.i.e. coming from infosource to info cube .
I would like to create a new transformation directly from Datasource to info cube but all the source fields are not available in target cube. How to map them.do i have to map all the target fields or i have to map according to the transfer rules target fields. what is the funda to make a transformation and mapping the source and target fields.
Could anyone please through some light here..
Thanks much in advance.

sunil kumar wrote:
Hi,
>
> As said above convert transfer rules to transformations (right click on transfer rules -> additional prop -> create transformation)
>
> Then right click on datasource -> Migrate
>
> After doing this, your datasource will be linked to Infocube directly with one transformations automatically.
>
> Regards,
> Sunil
Hi Sunil & Sravan,
THanks for ur quick reply.As you said click on transfer rules and create transformation.As i can see in my system i have a transformation from data source to infosource .i.e. starting with RSDS_ and then another transformation from info source to info cube.i.e. starting with TRCS_ . what i did was created a transformation by right click on info cube and by giving data source name as 2LIS_03_BF .this is a manual transformation i am mapping manually.Is this a correct way? Please tell me how to do it.
as i have to do this immediately.
Thanks in advance

Problem in mapping a many to many relation to a list

Hi,
I have a problem with mapping a many to many relation to a list.
I have a Many to Many relation in my database between tables baskets and products. This relation is implemented with a join table basket_products, which has two fields which correspond to the foreign keys to tables baskets and products. The join table need to have another one column "order", which defines the order of the products for the specific basket.
In my mapping I have:
@Entity
@Table(name = "baskets", uniqueConstraints = {})
public class Components implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY)
     @JoinTable( name="baskets_products",
                         joinColumns=@JoinColumn(name="b_id", referencedColumnName="pr_id"),
                         inverseJoinColumns=@JoinColumn(name="pr_id", referencedColumnName="pr_id"))
        //This of course doesn't work!!
       //@OrderBy(value="order")
     public List<Products> getProductses() {
          return this.productses;
     public void setProductses(
               List<Products> productses) {
          this.productses = productses;
@Entity
@Table(name = "products", uniqueConstraints = { })
public class Products implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY, mappedBy = "productses")
     public Set<Baskets> getBasketses() {
          return this.basketses;
     public void setBasketses(Set<Basket> basketses) {
          this.basketses = basketses;
     }In the EJB spec I read that :
"The property or field name must correspond to that of a persistent property or field of the associated
class."
What to do if I want to use a field from the join table to do the ordering of the list??
My problem is that the field "order", is not defined to the EJB container as a persistent field, so it cannot be used. But for my needs it is necessary that this field is included in the join table.
I thought that I could use the secondary table annotation to map the join table to the Baskets class, as well, so that I can define the order field, but this solution seems to me as a really wrong one.
Can anyone help me??
Thanks,
Elenh.

Hi Martin-
Can you please help me. Here are the details:
We have created an AQ in Oracle DB which will have the following message Structure:
CREATE OR REPLACE TYPE enqueue_payload AS OBJECT
( field1 VARCHAR2(100),
field2 VARCHAR2(100),
field3 DATE,
field4 VARCHAR2(100),
field5 NUMBER,
payload CLOB,
In the Payload field we are enqueing an XML message.
We have to use a OSB proxy service to dequeue the message from the AQ, transform it to another format and send to a SOA Composite.
We created a AQ Adapter in Jdeveloper 11g and imported the WSDL, XSD and .jca jca binding file into the OSB project. And configured the OSB proxy service using the WSDL imported.
However in OSB proxy service message flow when I try to create an XQUERY transformation, I see that the Payload field does not expose the structure of the XML message that is being enqueued. I even changed the message structure definition to have the payload field as XMLType. But it didn't help.
On analyzing the XSD created by AQ Adapter, I see that the payload is being defined as "string" in the XSD.
Inputs Needed
=========
1. How can we parse the payload field defined as CLOB/XMLType in OSB so that I can see the structure of the XML message it holds ?
2. Is there any in-built function in OSB to convert it to XML ?
3. Any other inputs in order to transform the XML message coming in the payload field as CLOB/XMLType
Please provide your inputs and I hope that I have clearly explained my use case.
Thanks in advance for your time and help!!
Regards,
Dibya

Problem: BlackBerry Maps

Similar Messages

Maybe you are looking for