Problem creating a database on RH 6.1 for O8.1.5i

Hi,
I am trying with Oracle8i but seems that I am doing something wrong. Please if somebody can look at this bug and let me know how to solve it.
I would appreciate it if you reply to ([email protected] with the answer!)
I follow the process of creating a database and then save the script. After that I follow the instructions to execute crdb1.sh, to create a database manually, but when I do that I get the attached error.
[oracle8i@spark create]$ ./crdb1.sh v8i815
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Release 8.1.5.0.2 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> LRM-00105: 'log' er ikke en gyldig boolsk vfrdi for 'log_archive_start'
ORA-01078: failure in processing system parameters
SVRMGR> 2> 3> 4> 5> 6> 7> 8> 9> CREATE
DATABASE "i815"
ORA-01034: ORACLE not available
SVRMGR> Disconnected.
SVRMGR> SVRMGR> Server Manager complete.

Looks like there is a problem with the 'log_archive_start'-parameter in you init.ora file. What you can try is to put a # in front of the parameter in the init.ora to make Oracle ignore it. When the database-creation is succesful you can then put your database in Archive log Mode.
Edwin Kessels
OCP-DBA
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by falocite ():
Hi,
I am trying with Oracle8i but seems that I am doing something wrong. Please if somebody can look at this bug and let me know how to solve it.
I would appreciate it if you reply to ([email protected] with the answer!)
I follow the process of creating a database and then save the script. After that I follow the instructions to execute crdb1.sh, to create a database manually, but when I do that I get the attached error.
[oracle8i@spark create]$ ./crdb1.sh v8i815
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Release 8.1.5.0.2 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> LRM-00105: 'log' er ikke en gyldig boolsk vfrdi for 'log_archive_start'
ORA-01078: failure in processing system parameters
SVRMGR> 2> 3> 4> 5> 6> 7> 8> 9> CREATE
DATABASE "i815"
ORA-01034: ORACLE not available
SVRMGR> Disconnected.
SVRMGR> SVRMGR> Server Manager complete.<HR></BLOCKQUOTE>
null

Similar Messages

Problems creating a database with DB config assistant

I've just installed Oracle for the first time. I'm a newbie. When I create database using the configuation assistant I get the following error:
ORA-00101:invalid specification for system parameter MTS_DISPATCHERS
Then I hit Ignore and I get the following error:
ORA-00102: network protocol )ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP)
Then I hit Ignore and I get the following error:
ORA-0103034:ORACLE not available
Then when I hit ignore again, I keep looping to the above error message and I'm forced to abort.
Please help me figure out this problem.
null

Hi, I checked the files... ORACLE_HOME\assistants\dbca\logs, was empty and
ORACLE_BASE\admin\SID\create have this:
ORA-27102: out of memory
OSD-00026: Message 26 not found; product=RDBMS; facility=SOSD,
During the installation I create a Database called TESIS, the SID is TESIS, but when i try to connect by PLSQL with SYSTEM/ORACLE or any other user, show me: ORA:12545 "no se ha podido resolver el nombre del servicio" , I checked the services, and the Listener is running , and the OracelServicesTESIS too, what could be the problem??
I hope u can help me...
Thanks!
Message was edited by:
Tere

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

Problem creating a database link

Hi,
I tried to create a database link, but it doesn't work. When I connect to the database via SQL*Plus or SQL Developer, the entries in the tnsnames.ora work.
create database link DBOPBWS2.BAG connect to demo identified by demo
using 'DBOPBWS2.BAG';
Entry in tnsnames.ora:
DBOPBWS2.BAG =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST =serv01.server.spub-systeme.de)(PORT = 1485))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = DBOPBWS2)
Entry in sqlnet.ora:
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
select * from [email protected];
Error:
ORA-12154: TNS: Angegebener Connect Identifier konnte nicht aufgelöst werden
12154. 00000 - "TNS:could not resolve the connect identifier specified"
What is wrong with the datbase link?
Please help me
Siegwin

Hi,
You could also "skip" the TNSNAMES use :Scott@my11g SQL>create database link DBOPBWS2.BAG connect to demo identified by demo
using '(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =serv01.server.spub-systeme.de)(PORT = 1485)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = DBOPBWS2)))'
Database link created.

Labview database problem: Create a database table from user defined fields

I am trying to create a new table in an access database opened by an ODBC connection from information entered a table stored in the database, but every time I try to create the table, the Labview Database connectivity toolkit VI for creating a table throws a cryptic error
"Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition. in NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->DatabaseCreateHeaders.vi"
I think this is becuase I am trying to re-create the database column variable type, but I am not sure what I am doing wrong. Everything seems to be fine as the data types go, and everything works as long as I use a constant to create the database columns. I even tried putting all of the information into the format labview defined, changed that to a variant, and redefined it as the labview database column type.
I have attached a simplified VI and a picture of what I am trying to
do, but I would appreciate any help I can get. Hopefully I won't have
pulled out all of my hair by the time some one replies!
Solved!
Go to Solution.
Attachments:
DatabaseUserDefinedTable.vi ‏14 KB
UserDefinedColumns.JPG ‏48 KB

Hi everyone. I am new to the database tool kit using labview. I am using labview 9.0f2 on Windows Xp. I am required to create a database (task is to create a table and to insert values into the table using Microsoft access 2007). I am trying to learn using the Create Database table.vi found with the software. I understand that need to create an access file and also had a mdl file which is name after it.(I had created them). Looking at the example given, I would like to add a few more variables, to be exact 6 more variables(therefore i would have 6 colum in my access file rite?). From the "connection information" the help information shows that it contain an 1D array of DB tools colum. ctl and also a cluster of 4 elements. the link to the access file, LabVIEW.udl shows that it restrict the colum in the access file.eg it has only stringcol,intcol,doublecol. I need to add more colum but cant add just like tt.
qn1: How to i add insert more varibles into the database so that it will apprears in access.
qn2: I cant drag and insert the "connection information" just to have more input. how do i do it?
qn3: where can i edit the info so that i can add more cluster into the access? when i drag out the input turn greyish.

Problem creating an IC Billing document in VF01 for a CC STO

Dear,
We are experiencing problems once we try to create an (Intercompany) Billing document. We have a Cross-Company Stock Transport Order scenario in which Company code/Plant 1000/100 delivers Material X to Company code/Plant 2000/200.
We are now at the point where the Stock Transport Order (NB) has been delivered (by means of a Replenishment/Outbound Delivery) and posted Goods Issue, so we want to create an IC-Billing document (Billing Type IV) in VF01 for our Replenishment/Outbound Delivery. For that, we have first created a Condition (Condition type PI01 - Inter-company Price) for Material X with VK11.
Now the problems: once we run VF01, SAP comes up with a pricing error stating that condition PR00 is missing. For our scenario, PR00 makes no sense since Material X is a ROH being used in Plant 200 for production purposes, not sales.
We analyzed the error and it appears that Pricing procedure for IC-Billing ICAA01 is used. We checked on our Client 000 that ICAA01 is a standard Pricing procedure, set exactly in the same manner as in our own development-Client.
In customizing for Pricing procedure ICAA01 we ticked Condition PR00 as NOT mandatory (V_T683S-KOBLI) and retried VF01. But now, SAP states the following error message:
Conditions of category b are not permitted in company code 1000
Message no. KM745
Diagnosis
No multiple valuation approaches / transfer prices are active in company code 1000. The condition type you are using has condition category b.
System Response
Conditions with category b are only permitted if transfer prices are active.
Procedure
Use only condition types with condition categories other than 'b', 'c' or 'h'.
Further in the Pricing procedure ICAA01 we could not find Condition type PI01
Our question is: what should we customize in order to solve this problem?
Thanks a whole lot in advance for any clues!!
Kind regards,
Bart Jongen

Hi
SAP 11
Please maintain CHAPTER ID of the said material with zero basic excise duty ( If u r not selling this material as a duty paid ) and select non movatable mateial. Parellaly u please maintain customer excise indicator as 0 no excise ( If this cutomer code is not lifting duty paid material for you).
This way u can create billing without excise.
Please try.
Thx

Problem Creating Oracle Database

I installed Oracle 8.1.5.0.1 on intel Linux Red Hat 6.2.
When I go to server manager and I run by create database script I get an error Oracle
not logged on.
If somebody cab help me out of these, its highly appreciated.
Thanks
deba

Once I get to Configuration Tools - Oracle Database Configuration Assistant, there is an error ... NLS_LANG environment variable incorrectly defined. Remove the variable from the environment or set it to a correct value. I originally had NLS_LANG='english_united kingdom.we8iso8859p1' then I changed it to NLS='AMERICAN.AMERICA.US7ASCII', finally I completely removed the NLS_LANG variable - still I get the same error message. Any help would a greatly appreciated =)

Creating standby database using RMAN

When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.

OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database?

Creating new databases after latest security patch applied

10.2.0.4
If I create a database AFTEr applying the opatch for the October 2009 security patch, do I need to also run:
@catbundle.sql cpu apply
Or is it included in the create database? I use the DBCA to create new databases.

user8574962 wrote:
This is what Oracle states on metalink doc id: 422303.1
Once the bundle patch or the Critical Patch Update (CPU) patch is applied on an ORACLE_HOME should you run post-installation scripts for every newly created Oracle database using the same ORACLE_HOME?
Solution
This should be documented in the patch's README as the answer will vary with each patch.
If the patch's README is not documented, then the Post Install tasks should be run.
And this is what the OCTCPU09 README says:
3.3.3 Post Installation Instructions for Databases Created or Upgraded after Installation of CPUOct2009 in the Oracle Home
These instructions are for both non-RAC environments and RAC environments when a database is created or upgraded after the installation of CPUOct2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files into the Database" for any new database only if it was created by any of the following methods:
Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
Using a script that was created by DBCA that creates a database from a sample database
Hope that helps.Point taken that it could vary by patchset, but those particular instructions quoted square exactly with what I had said. To quote with emphasis:
"You must execute the steps . . . for any new database *only if* it was created by any of the following methods . . ."
And what are those methods? Creating the database from a sample (pre-patch) database. If one uses dbca to create a 'custom' database, the resulting scripts will start from scratch with a CREATE DATABASE command - no pre-patch version sample or seed database involved.
:-)

Best practice to create a database

please can you send me the best practice to create a database which is want to be used in the future for a dataware house

Hi,
For Dataware housing purpose only means you can create the database by using DBCA. or for only transctional purpose means you can create manyally. like create control file , datafiles and all.
Thanks and Regards
Venkat.K.Raju
Mindlance,
Oracle Applications Team
BANGLORE..66
Mobile:+919986556688
Land:080-41464843 Ext-4942
[email protected]

Help with creating a database instance and populating it

the project given to me is to create a database and populate it in berkeley DB. use that as the backend to the Oracle Business Intelligence tool and run some tests.
with other databases like oracle, sybase and teradata, there were user interfaces both GUI and CLI to create a database. they provides sql interfaces for DDL/DML execution to create objects and populate them. basically these utilities helped me do my project successfully. but in berkeley DB i find very minimal utilities and they dont correspond to those provided by other databases.
is there an interface in berkeley db for sql execution
in general how do i create database and populate data in berkeley db
thanks
[email protected]

Hi Prasanna,
is there an interface in berkeley db for sql executionNo, Berkeley DB does not provide an SQL interface. It is a library that can be used to store and retrieve key/data pairs in a database. The Berkeley DB reference guide is a good place to look if you want to get an overview of Berkeley DB functionality:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/toc.html
in general how do i create database and populate data in Berkeley db You generally need to write code to do that. There are a number of programming language bindings provided for Berkeley DB, including a Perl binding. So you can write your testing code in the Perl scripting language if that suits you.
If you intend to measure performance I would recommend using the C or C++ APIs to build your application. The best way to become familiar with using Berkeley DB is with the Getting started guides found here:
http://www.oracle.com/technology/documentation/berkeley-db/db/index.html
Or by familiarizing yourself with the example applications that are shipped with the source distribution.
Regards,
Alex

Problem creating database during installation Oracle 8i

Hi!
When I was installing Oracle 8i a problem appeared. This problem was about Database creation, when the program of the Oracle installation was creating the database an error message was appeared : ORA-01034:ORACLE NOT AVAILABLE. I aborted the creation of the database and Oracle 8i was installed successfully.Now I'm trying to create the database with dbassist program but the same error is showed. Is there some solution?
In addition, I'm installing Oracle 8.1.7 in a Sunblade 100 Sparc with Solaris 8.0.
With best wishes, Jordi Carrasco.

did you define the variable ORACLE_SID and ORACLE_HOME?

Having problem creating Database on Oracle8i installed on a stand alone NT 4.0

Hi,
I have installed Oracle 8i Enterprise Edition on my stand alone Windows NT4.0 work station (Service Pack 3). After installation, it tries to create a sample database and just hangs there. I also tried aborting it and creating it using "Database Configuration Assistant" and still facing the same problem. It doesn't show any error but just hangs indefinitely at the database creation menu. I observed that the listener is not running.
Kindly let me know if there are any precautions to be taken while installing a Oracle 8i on Stand alone Windows NT. My NT is NOT CONNECTED to any network. Also, let me know how I can create a database when listener is not running.
Regards,
Sheshachala

I installed 816 EE on my home NT40 workstation without any troubles. Please make sure that you've suttisfied all installation requirements as written in the Installation Guide.Install other version of Servis Pack. I am usinn SP6. Alo you can try to copy a sample database from cd without creating it
Yours.

[b][u]JSP create mysql DataBase problem[/u][/b]

While i try to create mysql database through JSP program using query,
the qurey statement doesn't work
stmt.executeUpdate("create database employee;"); is not executing.
The code is as follows : Please Help Me......
try {
Connection con = null;
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
con=DriverManager.getConnection("jdbc:mysql://localhost:3306/bedrock","Dude1","");
try {
Statement stmt=con.createStatement();
stmt.executeUpdate("create database employee;");
System.out.println("Statement Executed");
catch(Exception e) {
System.out.println("Statement not Executed");
catch (SQLException ex) {
while (ex != null) {
System.out.println("sql exception"+ex);
ex = ex.getNextException ();
" THANKS IN ADVANCE "

It's not common to create databases with Java. I'd say this is especially true of JSPs. You'll have to GRANT permission to access and create tables to every single user that comes in? Are those tables cleaned up when users are done, or does the number of tables grow as the number of users grows? One table per customer? Sounds more like session or cookies to me. Do you validate users to make sure that only authorized users can create tables? Lots of problems, and it doesn't appear that you've addressed any of this from the code you've posted.
It's a bad idea to have code like this in a JSP. Those are for view only. Better to put database code on the server side where it belongs.
%

The Critical Problems for Creating Standby Database

The Critical Problems for Creating Standby Database:(I want to create a physical standby database on the same system of the primary database)
1. Should I copy all the backup datafiles, standby controlfile and password file to a same directory before the first time to mount the standby database?
2. Before mounting the standby database, Should I change the datafile's name to a new one in the standby controlfile? How to change them?
3. When issuing the command to mount the standby database, should I specify the controlfile's name.(using which controlfile to mount)
These problems are not clearly secified in Oracle documentations.

Can you point us to the Windows specific documentation you refer to?
The parameter DB_FILE_NAME_CONVERT should take care of the new mapping for your datafiles (and LOG_FILE_NAME_CONVERT for logs), so you should be able to put them where you want and use the parameter to point Oracle to the correct location. You should not need to change the name in the controlfile.
Place your standby controlfiles where you have the control files defined in your parameter file and Oracle should recofgnise that it is a standby db. You should not need to specify which controlfiles to use (if this is even possible), your CONTROL_FILES init parameter points to them.
Not sure about the password file....my instances are on separate boxes and the password file has the same name on both primary and standby.

Problem creating a database on RH 6.1 for O8.1.5i

Similar Messages

Maybe you are looking for