Problem creating record in FB4/Coldfusion

I am trying to insert a record into a mysql database using ColdFusion called from Flashbuilder.
Nothing I have tried has worked.
Is there a simple form somewhere what has all the code I can look at?
Just insert a name into a table would do fine.
This has srceview and cfc views
http://www.bluerosedetail.com/Test/
What am i missing?
Thanks so much
Dan Pride

Similar Messages

Problem while createing record using plsqlEO

Hi,
I called API in insertRow() method of plsqlEO to create record and the primary key person_profile_id is the out parameter of this API and it'll generate by the API.
But while submitting the page its throwing an error message as
the attribute person_profile_id is required.
So I couldn't able to create record. What might be the reason behind this?
The insertRow method is given below,
protected void insertRow()
Diagnostic.println("Inside insertRow!!!!");
Object obj = null;
HzPartyV2Pub hzpartyv2pub = new HzPartyV2Pub();
oracle.apps.ar.hz.v2api.HzPartyV2Pub.PersonRec personrec = new oracle.apps.ar.hz.v2api.HzPartyV2Pub.PersonRec();
BigDecimal[] x_party_id = new BigDecimal[1];
String[] x_party_number = new String[1];
BigDecimal[] x_profile_id = new BigDecimal[1];
String[] x_return_status = new String[1];
BigDecimal[] x_msg_count = new BigDecimal[1];
String[] x_msg_data = new String[1];
Diagnostic.println("Before calling initializePersonRec");
initializePersonRec(personrec);
Diagnostic.println("After calling initializePersonRec");
try
OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl)getOADBTransaction();
OracleConnection oracleconnection = (OracleConnection)oadbtransactionimpl.getJdbcConnection();
Diagnostic.println("Before calling createPerson");
HzPartyV2Pub.createPerson(oracleconnection, "T", personrec, x_party_id, x_party_number,
x_profile_id, x_return_status, x_msg_count, x_msg_data);
Diagnostic.println("After API Call Return Status is:" + x_return_status);
catch(Exception exception)
Diagnostic.println("Inside Catch Exception: " + exception);
checkErrors();
How to solve this issue? please suggest.
Thanks & Regards,
Sagarika

The SQL statement generated by TopLink is as follows -
UPDATE PR_SUPP SET CNTC_PRSN_NAME = ''
, REMK = 'Remark 123 !', LAST_CHNG_DTTM = {ts '2002-11-29 10:59:56.0'} WHERE ((S
UPP_CODE = 'A0001') AND (LAST_CHNG_DTTM = {ts '2002-11-29 10:46:01.0'}))
The coloumn name in the generated statement conform to the coloumn names in the table. The exception is being thrown for all 'update' queries for all objects in the application.

Unable to create records in database using PHP Data Service

Hello, I've been stuck on this for a few days and search up and down for this on the net, no response I've found has worked, so I come to you...
Here are the steps I've taken, I think it's pretty standard
1. I have a macbook pro running osx 10.7.3
2. I installed MAMP all default (I've acually reinstalled this because someone suggested this might fix it)
3. Thru phpMyAdmin I created a database called my_test
4. In that database I created a table, this is the export of that table: (I've also tried this with InnoDB which is the default)
CREATE TABLE `customer` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`name` varchar(50) NOT NULL,
`email` varchar(150) NOT NULL,
PRIMARY KEY (`id`),
UNIQUE KEY `id` (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=1 ;
5. I created a new Flx Project (Running Flash Builder 4.5.1 Premium)
     Project Name: PHPTest
     Application Type: Desktop (Although I've done the same thing with Web and got the same results)
     >> Next
     Application Server Type: PHP
     Web Root: /Applications/MAMP/htdocs/
     URL Root: http://localhost:8888/
     Clicked 'Validate Configuration' and that worked
     Output Folder: /Applications/MAMP/htdocs/PHPService (default by Flash Builder)
     >> Finished
6. On the Data/Services tab on the bottom I click 'Connect to Data/Service...'
     Select 'PHP'
     >> Next
     Select 'Click here to generate a sample'
     Select 'Generate from database' radio button
     Username: root
     Password: root (default for MAMP)
     Host name: localhost
     Server port: 8889 (default for MAMP MySQL port, the HTTP port default is 8888 which in both cases seem to work but every video I've seen that uses MAMP on youtube uses 8889)
     Database: my_test
     Click 'Test Connection' (works)
     Table: customer
     Primary Key: id (this field is greyed out and Flash Builder selects 'id' which it figures out from the SQL table)
     >> Click OK
7. Then if I don't have the Zend Framework folder in my /Applications/MAMP/htdocs/ folder it tells me its going to create that and I say alright. Then Flash Builder says stuff about how this is really only for testing and not production server ready and I say alright.
8. Then it takes me back to the Form from Step 6 when I get the chance to select 'Click here to generate a sample'
     These fields are now filled with this data automaticly:
     PHP Class: /Applications/MAMP/htdocs/PHPTest/services/CustomerService.php
     Service name: CustomerService
     Service package: services.customerservice
     Data type package: valueObjects
     >> Click Next (shows all the functions that will be now availible)
     >> Click Finished (End of the forms and it opens Dreamweaver to the php file it created CustomerService.php which I have no need to edit so I close that down)
9. Back in Flash Builder I switch to design view and drag a datagrid onto the big white area in the middle, whatever that is called.
10. Then below in Data/Services tab on the bottom I click drag the function 'GetAllCustomer' on top of the datagrid.
     I say yes to rebound and click ok and the view of the datagrid is updated with the colums from the 'customer' table in mySQL.
(Now let me say that when I hit save and compile this, if I actually had records in this table that I insert thru phpMyAdmin, this does show in the datagrid. So for the whole CRUD thing I am able to get the R which is Read)
11. Now going back to the design view in Flash Builder I will create a form to create records in the table... (I guess this isn't really a step)
12. In the Data/Service tab on the bottom I select 'createCustomer' function and then there is an icon called 'Generate Form' that looks like a white piece of paper with a gear on the bottom of it.
13. This opens up a new form and since I don't have a crazy bunch of fields in my table I just click Finished (If you click next you can specify which fields you want to exclude from the form but this time I don't need to)
14. This actually creates 2 forms if you look at the code, the second just shows the return type from when you click 'CreateCustomer' button on the first form. Because they overlap in design view I drag the form out of the way so you can see the input form, the return form, and the datagrid
15. Then I save and compile...
(Also if your actually reading this I didn't remove the id form field, I get the same result either way, but if you do remove the form field in the code/design you also have to update the button function to not deal with the id before it gets sent off to the php page since in this case the MySQL table is set to auto_increment the id, sorry this doesn't make much sence but this little area doesn't matter much either way)
16. Now fill in whatever data you want for name and email, try differnt numbers in the id field like 0, nothing, 1, 1000 and click 'CreateCustomer'
(For me nothing happens, no return is put in the return field, no error pops up and the datagrid is not updated with the new record, also going over to phpMyAdmin and checking out the table browse doesn't show any changes either, I know the button is calling the function because if I add a state change in that function it changes, it would seem that the line:
createCustomerResult.token = customerService.createCustomer(customer2); doesn't do anything)
So any idea what is wrong here, I'm convenced it's something stupid easy simple I just can't see it.

In case you need more info, here is a code dump on a mxml project that has this problem:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx"
                       xmlns:customerservice="services.customerservice.*"
                       xmlns:valueObjects="valueObjects.*"
                       currentState="State1">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.events.FlexEvent;
            protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                getAllCustomerResult.token = customerService.getAllCustomer();
            protected function button_clickHandler(event:MouseEvent):void
                var customer2:Customer = new Customer();
                customer2.id = parseInt(idTextInput.text);
                customer2.name = nameTextInput.text;
                customer2.email = emailTextInput.text;
                currentState = "Test";
                createCustomerResult.token = customerService.createCustomer(customer2);
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="State1"/>
        <s:State name="Test"/>
    </s:states>
    <fx:Declarations>
        <s:CallResponder id="getAllCustomerResult"/>
        <customerservice:CustomerService id="customerService"
                                         fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
                                         showBusyCursor="true"/>
        <valueObjects:Customer id="customer"/>
        <s:CallResponder id="createCustomerResult"/>
        
    </fx:Declarations>
    <s:DataGrid id="dataGrid" includeIn="State1" x="330" y="10" width="392"
                creationComplete="dataGrid_creationCompleteHandler(event)" requestedRowCount="4">
        <s:columns>
            <s:ArrayList>
                <s:GridColumn dataField="id" headerText="id"></s:GridColumn>
                <s:GridColumn dataField="name" headerText="name"></s:GridColumn>
                <s:GridColumn dataField="email" headerText="email"></s:GridColumn>
            </s:ArrayList>
        </s:columns>
        <s:typicalItem>
            <fx:Object id="id1" email="email1" name="name1"></fx:Object>
        </s:typicalItem>
        <s:AsyncListView list="{getAllCustomerResult.lastResult}"/>
    </s:DataGrid>
    <s:Form includeIn="State1" defaultButton="{button}">
        <s:FormItem label="Id">
            <s:TextInput id="idTextInput" text="{customer.id}"/>
        </s:FormItem>
        <s:FormItem label="Name">
            <s:TextInput id="nameTextInput" text="{customer.name}"/>
        </s:FormItem>
        <s:FormItem label="Email">
            <s:TextInput id="emailTextInput" text="{customer.email}"/>
        </s:FormItem>
        <s:Button id="button" label="CreateCustomer" click="button_clickHandler(event)"/>
    </s:Form>
    <s:Form includeIn="State1" x="0" y="204">
        <s:FormItem label="CreateCustomer">
            <s:TextInput id="createCustomerTextInput" text="{createCustomerResult.lastResult as int}"/>
        </s:FormItem>
    </s:Form>
</s:WindowedApplication>

Create records in Data Manager - System creates dublicates

Hello MDM-Experts,
I have a kind of strange questions: has anyone ever had the following situation in MDM Data Manager?
When creating one (1) record manually in Data Manager, the system dublicates the records, and suddenly, we have 2 or even up to 4 identical records in the system. Only the auto id is of course different.
When looking at the create date, the time difference is only a few seconds (4 to 5 seconds difference).
There is no entry in the log files, so I do not really know, what the problem is.
Has anyone else ever had that? Is there a keyboard combination, that forces that?
Thanks for all your help and answers!
Best reards,
Stefanie

Hello Rajeev,
I am assuming something like that. We even assume by now, that the system can not kope with merging and creating records. Two collegues where doing that at the same time on the same repository, but not on the same records.
When the merging one stopps, the records are created exactly.
Will test your suggestion.
Thanks,
Stefanie

Loyalty application error when creating records.

I am new in Siebel world and we have just installed Siebel loyalty and the Siebel Customer eLoyalty Portal on a sandbox to learn the product features.
The database has no data yet so I would like to create records.
So I start Siebel Loyalty 8.2.1 client, connect to the server, go to Loyalty Program Administration and click new to create a new program. I put a entry for the Name field and I have nothing to select from the Program owner pick channel window because I did not create a partner yet. So I start the Siebel Partner manager ENU application 8.2.1, connect to the server. I go in the partner tab and try to create a new partner entering a partner name.
Then I get this error when I press enter:
An error has occurred writing to a record.
Please continue or ask your systems administrator to check your application configuration if the problem persists. (SQL-DBC-00111) ORA-01400 cannot insert NULL into ("SIEBEL"."S_ACCNT_POSTN"."POSITION_ID")
I have Siebel admiinistrator access.
What I am missing here to be able to enter data. The only field mandatory is the Partner name...
Thank you for your help

You probably want to create an account, link a partner to the account and then create the program.
- Hashim

Error in Forms while creating the trigger- WHEN-CREATE-RECORD

Hello,
Right now I am using 11g client side and 10g database.
I am constantly getting an error while creating triggers in 11g.
I have created a sequence in SQL developer using the following code:
create sequence loc_id_sequence
start with 14;
After creating the sequence. I am trying to write the PL/SQL code in forms builder for the trigger WHEN-CREATE-RECORD
declare
loc_id number;
begin
loc_id := loc_id_sequence.nextval;
end;
But I have been getting the following error constantly. Can anyone please help me?
"Error 0 at line 5, column 4
SQL statement ignored".
Can anyone please tell me why I am getting that error

In fact, even I thought there might be some problem with the connectivity with the 10g database and 11g client but the other DB related code works.
I just have the problem with using sequence for the trigger WHEN-CREATE-RECORD.
In fact I also tried using WHEN-NEW-RECORD-INSTANCE smart trigger instead of WHEN-CREATE-RECORD for the same sequence. But even that doesn't work.
Do u have any idea of what that error means?
"Error 0 at line 5, column 4
SQL statement ignored"
Edited by: Pooja 1985 on Feb 26, 2013 5:43 PM
Edited by: Pooja 1985 on Feb 26, 2013 5:44 PM

How to cause a form to reload with a newly created record?

I hope this is easy and I'm just missing it.
I have a form based on a table (a "parent" table.). The parent table uses a trigger to generate the PK.
When a new parent record is created with the form, I want the page to reload with the newly created record still in the form. Then some conditional regions based upon child-tables would appear, with options to populate the detail records.
My problem is simple: how can I access the value of the primary key of the newly created record once it is submitted to the database, so I can use it to reload that record into the form?
Thanks very much for your help!

John - The DML process (Automatic Row Processing) has a Return Key Into Item option. That's what you need.
Scott

Hotkey "Create Record" while the form is in enter-query-mode

pressing the hotkey F6 for create-record while the block is in enter-query-mode results in the error - message:
Function key not allowed. Press Ctrl+F1 for list of valid keys.
The error-occurs although I created a trigger KEY-CREREC. The trigger isn't executed
In older Forms versions the behaviour was different. Is there a way to let the form work like in the old versions?

thnx for reply.Problem not solved.
i m trying to assign the value of text item to a variable in pre-query trigger. i m able to get the value into variable when the string in the text item does not startwith <,>,=. but when the string starts with any one of the operator (<,>,=) it gives error.
lenth of variable is 1000 charaters, and text item's max leanth is just 4 charactres.

FRM-41106 You cannot create records without a parent record.

Hello!
Forms 6i.
I have a Parent-Detail-Relationship. At the Detail-Block a "When-create-record" sets some default values on the Detail-Block.
I got error "FRM-41106 You cannot create records without a parent record" when the Parent-Block executes a execute_query.
I debuged the problem an found out, that the error appears in the standard-programunit "Clear_All_Master_Details".
The error appears, when the code is deleting the detail-block "code: Clear_Block(NO_VALIDATE)".
This is strange: The error appears only when I uses the "When-create-record"-trigger on the detail-block.
If a comment out the trigger, no error appears.
Why Is a "When-create-record"-trigger initiated when deleting the detail-block?
Default-Code of "Clear_All_Master_Details":
-- Clear all the detail blocks for this master without
-- any further asking to commit.
currel := Get_Block_Property(trigblk, FIRST_MASTER_RELATION);
WHILE currel IS NOT NULL LOOP
curdtl := Get_Relation_Property(currel, DETAIL_NAME);
IF Get_Block_Property(curdtl, STATUS) <> 'NEW' THEN
Go_Block(curdtl);
Check_Package_Failure;
Error appear here----> Clear_Block(NO_VALIDATE);
IF :System.Block_Status <> 'NEW' THEN
RAISE Form_Trigger_Failure;
END IF;
END IF;
currel := Get_Relation_Property(currel, NEXT_MASTER_RELATION);
END LOOP;
Thx in advance,
Wolfgang

Wolfgang,
To be honest, I've always done this kind of thing in the Pre-Inse rt or Pre-Upda te triggers. Why is it so important for the user to see the value of these field BEFORE the IN SERT or UPDAT E? Once the record is commited, they will see these values in your form. In my experience - users are typically satisfied with this approach. If your users are not OK with this approach, perhaps you could us a When-Validate-Record trigger instead of the When-Create-Record trigger.
I think the When-Create-Record option would still work, but your code will need a little tweak. Give the following a try:
   IF ( NVL(:termin.best_nr,'MSTR') = NVL(:pos.best_nr,'DTL')
        AND NVL(:termin.best_jj,'MSTR') = NVL(:pos.best_jj,'DTL')
        AND NVL(:termin.best_pos,'MSTR') = NVL(:pos.best_pos,'DTL') ) THEN
       <<...set_values..>>
   END IF;Remember, NULL values do not always get evaluated correctly so it is always best to use the NVL function to ensure fields are evaluated correctly.
BTW, you indicated that you ran DEBUG on your trigger, when your IF statement was evaluated did the "set_Values" section of your code run? If it didn't - do you have other code in your WCR trigger that is setting values outside of your IF statement?
Craig...

Problems Creating PDFs

A lot of problems creating PDFs come from using the wrong printer to create the PDF or underlying printfile.
You should use Adobe's Distiller printer instance to create a PDF. This comprises the latest Adobe Postscript printer for your operating system plus the Distiller PPD.
Don't use an HP printer to create your PDF. PostScript, or otherwise.
Don't use a Xerox printer to create your PDF. PostScript or otherwise.
See #1.
Note: If you are outputting to a service bureau, you might want to use something other than the Distiller printer instance. However, if you encounter problems with your particular PDFs, try using the official method with the Distiller printer to see whether any problems are limited just to your setup. If problems persist, you might have to create your PostScript output using one printer driver and the PDF using Adobe's Distiller printer instance.
Common problems include:
Black and white, or greyscale, PDFs created from color FrameMaker books and documents.
Distiller terminating the PDF creation process early, thus no PDF is created.
Troubleshooting:
For lack-of-color problems, first check you don't have Spot as Black set in the Frame Print dialog.
Update the printer you are using to the latest Adobe PostScript printer driver version.
Uninstall the printer you are using to create PDFs and to reinstall the latest version from scratch.

FAQ: Creating PDF Files from FrameMaker Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!
Dov Isaacs - 07:02pm Dec 6, 2001 Pacific
An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48" What does this mean?

When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?

a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

When-create-record ora-03114

This error occurs if you open a cursor, or if you use SYSDATE in a trigger when-create-record.
Can anyone help me?

Telling us you have forms 11 and database 11 is a very unspecific statement considering there are 2 major versions for each (11gR1 and 11gR2 for both forms and database) with each having several patchsets. So all in all there are a lot of combinations you could have, which probably could be the cause of your problems.
What I'd do is take a look at the alert.log of the database, and bring both forms and the database to the latest patchlevel of whatever major release you are using.
cheers

Skype Problem with recording device

After the windows 10 update it keeps saying "Problem with recording device" my camera works but, my microphone doesn't it worked fine before. The thing I use is a really old camera I don't know if that has anything to do with it.

Due to the age of the camera and lack of support from Creative your options are limited. I would suggest you connect the device directly to a free USB port on your machine. If you share it with several devices on a hub or extension the device can easily work intermittently. That type of issue can cause the audio to fail to be initialized, creating the problem. This can also occur if the audio half or both halves of the camera/cabling is intermittently failing as well. You have the option of switching to the generic Microsoft Video and Audio drivers to see if that helps as well. Below is a graphic on you how to update the drivers to the generic "USB Video Device". You can do the exact same thing for the audio half of the camera by updating it to "USB Audio Device" (which is what you might want to try first in this scenario).

Problem Creating Hyperlink to another workbook

I am having a problem creating a hyperlink to a worksheet in another workbook.
Here is what I have done:
Created the master and detail reports in 2 different workbooks.
Executed the master worksheet to display the data
Right clicked the field in the first row where I want to create the hyperlink, and chose Manage Links
Clicked the New Link button
Chose Worksheet for Where do you want to link to?
Clicked Browse by the Destination Worksheet
Clicked the detail report from the list of workbooks but the select button is grayed out
Does anyone have any idea why it won't let me select the detail report to link to?
I have OracleBI Discoverer Plus 10g
Any suggestions would be deeply appreciated.

Yes, I did add a parameter to the detail report so that I could get detail just for that one item. The part that is giving me trouble is specifying the Destination workbook/worksheet. I see the detail report when I browse but the Select button is grayed out so I haven't made it to the part where you identify what values to pass to the detail report yet.

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

Problem creating record in FB4/Coldfusion

Similar Messages

Maybe you are looking for