Problem dialing some other users in my friends' li...

Hi, I just installed Skype on Windows 8.1 Pro. I have a problem dialing some of my friends in the list and they cannot dial me too. Some I can dial though. Very strange! Any solution?

There's no really good way to do what you want. Sharing files safely among users requires a client-server setup. What you should do is keep separate copies of the files in each account and pass copies back and forth. So you and your wife each have a copy of a spreadsheet. When she makes a change, she makes a copy and puts it in the Dropbox folder of your home folder. You make a copy of that copy and add it to your files.
Otherwise, the best practical option would be to put the files on an external drive and check the box labeled Ignore ownership on this volume in the Finder Info window. Alternatively, you could put the files on a disk image and do the same thing, but then the disk image won't be backed up by Time Machine while it's mounted. Another option is to set access-control lists for the files, but that's an advanced technique. If you want to try it, use an application called "Tinker Tool System" to manage the ACL's.

Similar Messages

  • HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

    I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open.  First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Logo displaying in productin but not displaying in some other user

    Hello experts,
    I developed payment advice sheet using scripts and transported to production successfully.In production also the output is dispalying correct but some other user (clnt uses different user in that only logo is not displaying) remaining output is correct.
    But only logo is not displaying.But in production logo is displaying.What is the problem?
    please help me in this?

    Please clarify your posting...
    In production, the logo displays correctly for all but one user?
    Or, did you mean that in the production instance, the logo is correct, but in other SAP instance(s), such as training, etc., the logo does not appear? 
    If the second case, check to see that transport completed in all target instances.
    If the first case, sorry, no ideas about what would cause that.

  • Error while updating a task - Task acquired by some other user

    Hi,
    I have a task assigned to a Group (AdminGroup). To update the outcome of task ie to approve task i am first acquiring the task and then updating the task outcome.
    But while doing so i am getting following error:
    Invalid action on workflow task.
    Action OUTCOME_UPDATE on task 101d12624092f7d9:-1f79044d:124e34e8057:-7b4e is not valid because of The task has been acquired by some other user..
    Contact oracle support if error is not fixable.
    at oracle.bpel.services.workflow.task.impl.TaskService.performPreActionValidation(TaskService.java:3408)
    at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcomeAndEvaluateRoutingSlip(TaskService.java:1074)
    at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:941)
    at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:920)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.updateTaskOutcome(TaskServiceBean.java:410)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:396)
    at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.TxRequiresNewInterceptor.invoke(TxRequiresNewInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at TaskServiceBean_RemoteProxy_68d4144.updateTaskOutcome(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    The code that i am using for updating the task outcome is as follows:
    The error should not come as the context of user is same for acquiring and updating.
    IWorkflowContext wfCtx=wfSvcClient.getTaskQueryService().authenticate("oc4jadmin", "oc4jadmin",
                   "jazn.com", "admin");
                   ITaskService objITaskService=wfSvcClient.getTaskService();
                   objITaskService.acquireTask(wfCtx, strTaskID);
                   objITaskService.updateTaskOutcome(wfCtx, strTaskID, "APPROVE");
    Here admin is the user that belongs to group AdminGroup and the task is assigned to AdminGroup.
    It was working fine a week ago on the same enviornment but from past few days am getting this error.
    The BPEL version is 10.1.3.0.
    Help appreciated!!
    Regards,
    Bhavik

    hi,
    Thanks Marc for the reply.
    Before acquiring the task , I have checked the acquiredby column in wftask table in orable schema and its value is null.
    So it allows me to acquire the task. The error that i am getting is on updating the task outcome.
    While updating it is giving error as: task already acquired by some other user.
    This should not happen as the workflow context that i am using for acquiring the task and updating the task is same.
    Regards,
    Bhavik

  • Record has been changed by some other user

    Hi All,
    i am working on a network when i make some update in my database through a form on first updation it works fine, while on second updation it gives me an error 'Record has been changed by some other user' wile no other user is currently working on the same form.
    Plz tell me what i can do.
    Wating 4 your reply.
    Thanks in Advance.

    You probably have a database trigger which changes the value of a column which is also part of your form.
    The solution depends on the version of Oracle forms and the database that you are using.
    Oracle forms 6 introduced a DML returning value (block level) which you can set to Yes so that the value(s) changed by the server will automatically be updated within the form. However, you must be running against an Oracle8 (or later) database for this to work.

  • SYSDBA - problem with viewing other users package body texts on sys account

    Hi,
    SQL Dev 1.0.0.15.27 has problem with correct display of other users package body texts on sys account. All bodies have "create or replace" text instead of all pck. bodies text.
    I guest it's problem with SYSDBA role. On system account text is displayed correctly. Quest SQL Navigator 5.x has no problem with this. Any ideas ?
    Regards,
    MM

    Hi Everyone,
    Just so I can close the case on this issue, although I was successful in
    using CSS to resolve the issue, actually, the issue was not really
    resolved. There was (for me) still the problem of rollover images not
    working in IE, and if I were ever to get another good night's sleep, I
    would need to resolve it -- so I did. Recall me saying earlier about the
    sizes being brought in to the javascript code by Dreamweaver? The original
    issue with having the size of the small image in the code caused the code
    to see the larger image as small also! However, when I deleted those size
    attributes' numbers, I failed to delete the words "width" and "height"
    along with the double quotes following each. So, while the other browsers
    ignored these "blank" attributes within these double quotes, IE apparently
    didn't, reading these "blank" values as some very small value, thus
    displaying the image in the absolutely smallest size possible! Wow! When I
    removed these two blank attributes, my problem went away! Live and learn!
    So, to all who were desperately trying to assist me, please accept my
    deepest and most sincere apologies. All the while I was blaming IE, I was
    the guilty one!!! Shame on me, and thanks for the wonderful responses I
    received from the Dreamweaver forum team. I will go and stand in the corner
    for 8 hours with my dunce cap on...
    Joe Dardard

  • Streaming problems and some other questions

    1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this? is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where? thank you! x p.s. i just tried with wifi now, and it doesn't stream at all, it says i may have either javascript turned off or old version of adobe flash player........
    2) can we not have adobe flash?...because i can't stream any video off any website...
    3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
    4) under 'setup' there is an 'interactive' button. what i that for?
     5) BLUETOOTH PROBLEM: i've paired it and tried (when to media and done the 'recieve using bluetooth') and it didn't work. so i deleted the pair and tried it without, and still nothing. i've tried fixing some options in settings but still nothing...i think i played with the options a bit too much now...lol. but is there an ideas? please help. also, is there anything in options that i have changed which might be hindering the process (i.e. firewall)? 
    p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
    thank you! x
    Message Edited by mtpac2001 on 08-02-2009 10:03 PM
    Message Edited by mtpac2001 on 08-02-2009 10:04 PM

    mtpac2001 wrote:
    1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this?
    Many possible reasons -- poor coverage area, old OS, trying to use the full YouTube rather than their mobile site, etc.
    mtpac2001 wrote:
    is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where?
     http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    mtpac2001 wrote:
    2) can we not have adobe flash?...because i can't stream any video off any website...
    No. Flash is not available for BB's at the present time. I'm pretty sure that your "any" words are overstated -- perhaps the sites you try cannot stream, but there are others who can stream, so any is a bit over the top.
    mtpac2001 wrote:
    3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
    Just send yourself another attachment...then pay attention when you save it, then go there and that should be the same place that older PDF should have gone.
    mtpac2001 wrote:
    4) under 'setup' there is an 'interactive' button. what i that for?
    Sorry, no clue...might be something specific from your carrier.
    mtpac2001 wrote:
    p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
    thank you! x
    Your support is, by contract, provided by your carrier...that is how it works. For general use of the devices, these forums are, frankly, the best place as the folks here are other users just like you.
    Cheers!
    Message Edited by sdgardne on 08-02-2009 02:06 PM
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • More email problems - same as other users

    Same as other users, suddenly my BT email account refuses to let me receive or send messages, whether using Outlook on a PC or the Apple client on an iPad or iPhone.  All worked yesterday!
    Interestingly, I am also unable to login to btyahoo, it says "Invalid ID or password". 
    I see that there are posts out there saying it is an "intermittent" problem.  Does that mean BT don't know what the problem is?  Do I just have to wait and cross my fingers in the hope that it suddenly starts working again? 

    Here you go, don't know if this helps, on this tracert it was indeed going to 217.12.13.134, but I do occasionally get other servers.  At this stage I am contemplating paying for a third party email host......
    >tracert mail.btinternet.com
    Tracing route to pop-smtp.bt.mail.fy5.b.yahoo.com [217.12.13.134]
    over a maximum of 30 hops:
      1     *        3 ms     1 ms  192.168.0.1
      2    25 ms    25 ms    25 ms  esr16.kingston5.broadband.bt.net [217.47.66.147]
      3    33 ms    26 ms    25 ms  217.47.66.13
      4    27 ms    30 ms    27 ms  213.1.69.130
      5    33 ms    28 ms    26 ms  217.32.24.66
      6    28 ms    28 ms    26 ms  217.32.24.182
      7    29 ms    29 ms    27 ms  acc2-10GigE-0-1-0-6.l-far.21cn-ipp.bt.net [109.1
    59.249.222]
      8    34 ms    34 ms    30 ms  core1-te0-15-0-2.ilford.ukcore.bt.net [109.159.2
    49.145]
      9    29 ms    27 ms    28 ms  peer1-xe10-0-0.telehouse.ukcore.bt.net [109.159.
    254.122]
     10    38 ms    29 ms    28 ms  ge-1-1-0.pat1.the.yahoo.com [195.66.224.129]
     11    30 ms    34 ms    28 ms  ge-4-1-0.msr2.ukl.yahoo.com [66.196.65.213]
     12    38 ms    35 ms    31 ms  te-8-4.bas-a2.ukl.yahoo.com [217.12.2.219]
     13    31 ms    30 ms    30 ms  pop-smtp1-a.bt.mail.vip.ukl.yahoo.com [217.12.13
    .134]
    Trace complete.

  • I am logged in as a 'guest' on a computer that is used by others. I would like to totally hide my browsing history by 'resetting safari' but wonder if this will cause problems for the other users....Or does the resetting just apply to the guest?

    I am logged in a computer (that is used by others) as a 'guest'.  I would like to completely hide my browsing history and I hear this is done by 'resetting Safari'.  My question is, will this mess things up for the other people who logg into use the computer?  Or does the resetting apply only to the guest?

    Hi Chris
    anything, including resetting, that you do as guest should not affect other users who log into their own accounts. Just logging out of guest should remove the obvious history/cookies etc although of course it's possible for an admin of that computer to keep track of some info.

  • Same problem as some others, can't install iTunes 10.6.1 on WIN 7 64-bit !

    After deleting all apple components from my system, the installer each time shows the error message, that it's not able to finish the installation cause a required program doesn't work correct. The installation on the same computer (Virtual PC WIN XP 32bit) was no problem. Pleas help, if possible
    wallaguenna

    the installer each time shows the error message, that it's not able to finish the installation cause a required program doesn't work correct.
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Power Supply problem or some other piece of hardware...?

    Hi, I have recently upgraded my video card, Ram, motherboard and Hardrive. My motherboard is a MSI KT6 Delta-FISR and I brought 2x512mb pc3200 Vdata Ram chip, a Seagate 80GB SATA Hardrive, ATI 9700pro, and a Thermaltake SILENT PUREPOWER SERIES TT-420AD W0009RAC 420 watt power supply. I orginally purchased an ICUTE 400 watt PSU which proved insufficent for my system(or so I thought). a week or so I posted a topic asking about what new PSU I should get(becuase of my crappy ICUTE PSU) and was told that the Thermaltake PSU I was considering buying should be sufficent for my needs. Now thats all well and good(thanks for the advice guys ) but I am now expriencing exactly the same syptoms i had with my ICUTE PSU.
    The voltage on the shiny new Thermaltake PSU is as follows:+3.3V@30A;+5V@40A+12V@18A
    The voltage on my shiny new(but crappy) ICUTE PSU is as follows:+3.3v@28A;+5v@40A;+12v@18A
    Very similar I know, but I presumed that because ICUTE isn't exactly the best brand around they were in someway lying about the Amps avilable. So I take my Thermaltake PSU out of its box looking foward to finally getting my newly upgraded computer NZ$1000 later, working.
    Alas it was not to be. Screw in the PSU,  connect all the connecters to the drives/video card/motherboard and finally plug it into the power cable and press the power button on the case. The computer powers up fine( and also A LOT quieter than the ICUTE PSU)  and runs the POST screen. Goes through all of that crap and then starts to load the windows setup. Setups first screen flashes for 1 second then the computer turns itself off. OOOOOO DEAR! EXACTLY the same syptoms as the ones I experenced with my ICUTE PSU.
    Now before I had brought my new Thermaltake PSU I had tried two other PSU's.
    Now bear in mind these are fairly generic cheap PSU's
    First one I tried was a 300watt Hynea(i think!) PSU which had about 14A on the 12v rail and predicably It did the same thing as  my ICUTE PSU.
    Second psu was a "Olympics" 320watt PSU. Now very very strangly this PSU which had 12v@16A;5v@30A;3.3v@28A Ran my system fairly stably for about 3 days( having problems with XP setup, and still am so I could only run 95,98 on it) but the fact is it ran of for about 3 days then Started turning off every 10 seconds like the others.
    Now what I'm really hoping is that someone can tell me what the hell is going on with my machine!Computer runing on low spec 320watt PSU's and not on much higher spec 420watt PSU's, this could only happen in a crappy country like NZ

    hi all, Well I ran memtest-86 for 17 hours! and got these results:
    test: 0 Errors:0
    test: 1 Errors:0
    test: 2 Errors:1
    test: 3 Errors:498
    test: 4 Errors:
    test: 5 Errors:12533
    test: 6 Errors:27635
    test: 7 Errors:26162
    test: 8 Errors:863
    test: 9 Errors:0
    So those are the results. But im wondering if I was meant to run the test for so long cause 6 hours into the test it had NO errors. I could of left the test going for even longer but I got sick of waiting. How do you know when its finished? Also does the test scan only RAM cause it says on the chart:
    Pass
    16
    And there are certainly not that many sticks of RAM in the computer.I'm not familar with memtest so could someone please explain these results.
    Note: I took the RAM out of my machine and ran them in another computer.
    thanks

  • Batch locked if some other user using same batch

    Dear All,
    I am facing the batch lock error which say like this :
    Batch XXXX of material XXXX is already locked by userXXX. Message no. M3682
    Now practically we have the same batch at different distribution centres at different plants. so even if any 1 person is doing anything on that batch than system gives this error message to other person.
    Can you please give me any solution to overcome the same.
    Thanks in advance......

    Firstly please check if you have activated the batch level as 'Batch unique at material level'. If yes, we have to confirm that the system behavior that you are facing is the standard system design.
    Please, consider that when you define the batch at material-level, then,the batch data is not plant-depended. This means that a lock on the batch will have effect on postings in all plants.
    However, you might want to consider a modification to this standard behavior, see the following  notes:
    157423 - Message M3682 for goods movement to the same batch.
    633750 - MIGO: Message M3682 with goods movement to same batch.
    1422983 - MIGO: Message M3682 during goods movement to same batch

  • HT4061 I tried to update dictionary but couldn't do so and it got hanged up the icon on my mobile screen shows waiting i can't delete it as it is not installed also same waiting problems appears some other programs please tell me how delete this shoes wai

    Please let me know over come this problem

    Try to restart your phone by holding the sleep/wake and home buttons until the phone turns off ignoring the slide to power off message. Then press the sleep/wake button to turn it back on.

  • Tomcat problem or some other

    i am succesfully running my code in tomcat under Java home with j2sdk.1.3.1_12.but moment i changed Java home to j2sdk1.4.2_07 tomcat stop working .its giving in following error messages in catailna.out
    WARNING: Duplicate name in Manifest: Class-Path
    Catalina.stop: java.net.ConnectException: Connection refused
    java.net.ConnectException: Connection refused
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158) at java.net.Socket.connect(Socket.java:452)
    at java.net.Socket.connect(Socket.java:402)
    at java.net.Socket.<init>(Socket.java:309)
    at java.net.Socket.<init>(Socket.java:124)
    at org.apache.catalina.startup.Catalina.stop(Catalina.java:579) at org.apache.catalina.startup.Catalina.execute(Catalina.java:402) at org.apache.catalina.startup.Catalina.process(Catalina.java:180) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203).
    hope for a postive respnse from you people.

    You'll need to post it in a JavaScript/VBScript forum.
    Your code is not running at the server (Tomcat) but at the client (the browser).

  • Isight problem like thousand of other users !!!

    I don't believe it but I am having the same problem like many other users. I am getting my masters in computer science next year and I know how to handle a computer, just to make this clear.
    What makes me really mad is that many other users are struggling with the same problem as I do, but there is no help coming from apple, as it seems to be.
    So anyway, my problem is that my webcam on my macbook pro works for a few minuits or sometimes for a few seconds, then I have this **** black screen, but the led is green.
    If I do the pmu or whatever it is called, the camera works sometimes again, but as I have written, sometimes for a few minuits/ seconds, then it stops .
    Since I searched the web or this forum here, there are so many guys complaining about the same problem, but seriously, did everybody go to the service ?
    I just bought my notebook three months ago, but this problem seems to be familiar for at least two or three years now. This problem should have been fixed by now. !
    Any suggestion ? Maybe someone solved the problem and would like to share his idea :)?

    Apologies, I don't have the issue (but I do have a Masters degree in computational science) - does the screen go black, or just very, very, very dark, ie. if you turn all the lights on, do you get anything one the screen.
    Trying to establish if the exposure metering is wrong, or if it's a physical issue with the camera (in which case you can have this fixed under AppleCare).
    Which applications are you using when the isight loses it ?
    Are you using any of the quartz effects ?

Maybe you are looking for