Problem. Does not refresh language change in ADF components

I have three recource bundles designated to change the language in a user interface.. The problem is that not all elements get refreshed.. Where could be the problem?

I use af:selectOneChoice component to choose the language. If i choose a language I must click a submit button which instantaneously executes a submit action which reloads the page. Problem is when browsing other pages (after changing the language) not all the elements contain chosen lang. some of them still show previous one.. the only way to cope with it is to log off or restart the application... then everything is ok.. until I change the language actually... Can this be a problem with rendering or smth? Any ideas?

Similar Messages

JDEV 11g R1: Static Lov does not refresh on changing locale

Hello,
I have created a static view object. Then created another view object that has an attribute defining a LOV using the former view object. In the web application I change the locale programmatically. I'm trying to set locale in ViewRoot, and also in the binding container:
      JSFUtils.getFacesContext().getViewRoot().setLocale(new Locale(localeStr));
      ADFUtils.getApplicationModuleForDataControl(AMDC).getSession().setLocale(locale);
      ADFUtils.getDCBindingContainer().getBindingContext().setLocaleContext(new DefLocaleContext(locale));
      ADFUtils.getDCBindingContainer().execute(); The problem is that the values of static list will not be translated. Though after executing rollback operation, they will show the translated values.
I suppose it has to do with caching LOV values.
Do you have any suggestion?? How can I make this LOV refresh??
Thanks, Eniko

Hi,
taking it from:
+"However , if we refresh the table or reload after save , the toop tip also get change . but we need to update the tool tip on change the lov . any suggestion ? "+
The autput text component is part of a table ? If so then the table needs to be refreshed as the values in there are stamped. If I am wrong with my table assumption and the output text is part of a form, try setting clientComponent="true" for the output text field
Frank

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

NWDS WebDynpro views are not refreshing after changes in layout...

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Hi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
I'll let this question unanswered until this fix comes out.
Cheerio !
JV

NWDS view not refreshing after changes in layout

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Jesus,
Do you have IE7 on your machine?? IE7 with a certain patch causes this issue.
Check this thread for more details
Probblems Net Weaver Developer Studio (NWDS) caused by Internet Explorer 7
Chintan

My JSP file does not reflec the change of a Bean

My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
null

SangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]

When the screen saver turns off my front panel does not refresh.

when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

Finder window does not refresh under yosemite

I have a weird effect on my rMBP with the latest Yosemite:
Very often (not always) when I save a file from an application an open Finder window to the save location does not refresh. The new file is not shown! I can go in with Terminal and everything is fine, the file is there. I can edit its contents (eg. with vi or pico) and I can rename the file. However the Finder still does not show it. Not even closing and re-opening the folder help. The only way I found is to create a new folder and immediately delete it. That forces the Finder to update the window. It looks as if the Finder does not get *some* update events.
I do have XtraFinder installed, but deinstalled it and even after a reboot nothing changed, Finder still does not refresh its display. I cannot tell exactly when this started, but incidentally I run an update some days ago and installed Server 4.0.3 and upates to the latest Pages/Keynote/Numbers (however I do not use those, I am still and will stay with iWork'09).
I use Server on a MBP with dynamic address because I needed virtual domains for local testing, nothing really "serverish". It just provides a nice GUI for easy setting-up of virtual domains.
Any ideas? What can I do?
Thanks
---markus---

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Advanced Table does not refresh after database level action

Hi,
I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
This is very critical requirement for the client, any inputs will be greatly appreciated.
Thanks a lot in Advance.
Here is the code snippet from my CO's processRequest:
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
if(tblbean!=null)
tblbean.setRendered(true);
OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
tblam.invokeMethod("initQuery");
tblbean.getTableData();
Here is my AM - initQuery() code:
public void initQuery()
//clearVOCaches("RecastLineEO",true);
clearVOCaches(null,true);
getRecastLineVO1().init();
Here is the VO - init() code:
public void init()
System.out.println("****************************executing...");
OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
if (tx.getTransientValue("RECAST_ID") !=null)
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("recastId: "+ recastId);
setWhereClause("RECAST_HDR_ID = :1");
setWhereClauseParams(null); // Always reset
setWhereClauseParam(0, recastId);
executeQuery();
}

hi,
This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
This is very critical...
Thanks
Srini
public void validateRecast(String respKey)
OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("*********************validateRecast().RecastId: " + recastId);
OracleCallableStatement ocs = null;
Connection conn = tx.getJdbcConnection();
String strOut="", strErr="";
Number respId = null;
try
respId = new Number(respKey);
catch(Exception e)
throw new OAException("Invalid Responsibility");
String stmt = "BEGIN " +
"GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
"END;";
try
ocs = (OracleCallableStatement)conn.prepareCall(stmt);
ocs.setNUMBER(1,recastId);
ocs.setNUMBER(2,respId);
ocs.registerOutParameter(3,OracleTypes.VARCHAR);
ocs.registerOutParameter(4,OracleTypes.VARCHAR);
ocs.execute();
strOut = ocs.getString(3);
strErr = ocs.getString(4);
ocs.close();
System.out.println("Returned with: " + strOut);
if(strOut.equalsIgnoreCase("ERROR"))
//throw new OAException(strErr);
tx.putTransientValue("ERROR",strErr);
tx.commit();
getApplicationModule().clearVOCaches("RecastLineEO",true);
RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
lineVo.init();
System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
catch(SQLException e)
tx.rollback();
if(ocs!=null)
try
ocs.close();
}catch(SQLException e1)
throw OAException.wrapperException(e1);
throw OAException.wrapperException(e);
}

PDF output does not refresh data in BI Publisher, XML and HTML do refresh

I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
Francisco

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

Discoverer 10.1.2 does not refresh new added column

Hello,
I need help to add a new item to EUL Business Area folder for a new added column in the database table.
When I refresh the folder in the BA EUL, the result shows no difference between the folder and the underlying table in the database; however, when I quey the table in the database, a new column is there. The refresh of the folder in the Discoverer Admin tool cannot find the newly added column. Weird!! The first time saw this problem.
Could someone shine some light on it? Would be really appreciate it!
Ping

I have a slightly different problem and can't solve it! When I refresh the EUL, the result shows the differences between the folder and the underlying tables in the database. However, it does not refresh the EUL in Discoverer Administrator 10g. Nothing happens! When I try to refresh again, the same list is shown... Does anyone know what could be happening?
Thanks

Hyperlinked JSP Page does not refresh contents

I have a very typical problem.
In my application whenever I call a jsp page using hyperlink without any querystring attached to it the page called does not refresh. However when I press refresh on the browser it does refresh the contents. Basically in this page I am using some session variables to fetch data. So I do not call the page by passing querystring instead set the attributes of session variables and then the page is called as a hyperlink.
However if I call the same page using submit the values are refreshed.
Help on this urgently will be appreciated.
Thanks
Manish

Just set 'no-cache' option for the jsp page and test it. It should work. only you need to do is
response.setDateHeader("Expires",0);
     response.setHeader("Pragma","no-cache");
     if(request.getProtocol().equals("HTTP/1.1")) {
          response.setHeader("Cache-Control","no-cache");
have fun!!
---rajsekhar

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

Problem. Does not refresh language change in ADF components

Similar Messages

Maybe you are looking for