Problem in alv report coumn header in the background while using salv

Hi  all,
        now i am working on  alv report for this i have used salv i mean oops alv ,So here i am facing one issue while executing the report  in background
        the report column headers are not displaying properly as it is displaying in front end.
       In the back ground it is always displaying column header as data element field label short text. i have written a code to pick the long text
       but it is working fine if run the report in the frontend where as in the backgroiund it is always displaying short text but it is wrong.
here i am attaching the output screen shots in front end and background.

Hi Satish,
I have tried this scenario with Reuse ALV grid 1st i found the same issue as u said in background job,
then i set in field catalog as,
wa_fcat-ddictxt = 'L'. Now its working fine. L stands for long text.
Before...
After...
For LVC u can try the below fields in fieldcatlog.
COLDDICTXT = 'L'.
SELDDICTXT = 'L'

Similar Messages

  • Is it possible to play audio from video in the background while using a different app?

    I would like to be ale to play audio from a video file in videos (or av player hd) in the background whie using a diffent app in my iPad 2. (ie watching a video while taking notes on the content or highlighting an e-textbook).
    Is this possible? Either through the original iPad functionality or by downloading a separate app?
    Thanks,
    mji

    Is it important that the music come from a video, or are you just looking to listen to music in the background, while doing something else.  If the later, you can certainly play music from the Music App, Pandora, or iHeart Radio, etc., and with the music playing, tap your home button to go to your home page and open anything else you want and the music will continue.
    I don't have any videos to try out right now, but you try the same thing out and if the music continues, it works.  If it doesn't, it doesn't.

  • Good evening, How can I check if there are downloaling programs running in the background while using an IPod. I want to eliminate them because my internet dowload volume has increased dramatically.

    How can I check if I have a software(s) installed on my Ipod touch (4th generation) that download information all the time in the background? My internet downlaod consumption has increased dramatically lately and I cannot solve the problem. An online support person from my internet provider suggested to check that out.
    Thanks for your¸help.

    HI northangel,
    you can press the home button double times and the bottom of the screen and it will show apps that are running in the backround.

  • Data of alv report in  excel file in background processing using open datas

    Hi Experts,
    I have developed report for purchase register . if i execute this report in background process i am not able to get the downloaded file in excel and output is also not coming properly, columns are going to overlap.
    i used open dataset  read dataset and close dataset but still problem is not solved. so if anyone have code with this and also which will have concatenate statement in the code send it.
    Regards,
    Rahul

    Hi Rahul,
    Ur code shud be like below:
    DATA : l_filename2 TYPE string,
                v_extn.
        SPLIT p_filename AT '.xls' INTO l_filename2  v_extn.
        CONCATENATE l_filename2  'downloaded'  INTO l_filename2  SEPARATED BY '_'.
        CONCATENATE l_filename2  'txt'   INTO l_filename2 SEPARATED BY '.'.
        OPEN DATASET l_filename2 IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
        IF sy-subrc <> 0.
          MESSAGE e499(sy) WITH text-e02.
        ENDIF.
        LOOP AT it_order_number INTO wa_order_number.
          TRANSFER wa_order_number TO l_filename2.
        ENDLOOP.
        CLOSE DATASET l_filename2.
    Now, go to tcode AL11 and check it in the Application server itself.
    Hope this helps,
    Regards,
    Arnab.

  • Problem in ALV report

    Hi Friends,
    I have the following 2 problems in ALV report
    1) Logo is not getting displayed in the report.
    2) When i click on the Purchase order number in the report  the interactive report is not working,i am not able to see report of First interactive level.
    can you help it out friends.
    Thanks and regards
    Dinesh
    REPORT  YSDBALV1
    tables: ekko , ekpo .
    type-pools: slis .
    Table for Display Header
    data:i_header type slis_t_listheader with header line.
    *Fieldcat Declaration
    data:fieldcatalog type slis_T_fieldcat_alv  WITH HEADER LINE.
    *Table of Events
    data:i_event type slis_t_event with header line .
    For Layout
    data:i_layout type slis_layout_alv .
    data: text(30) .
    *Internal Table Declaration
    data: begin of it_final occurs 0 ,
          ebeln like ekko-ebeln ,           "Purchasing Document No.
          bedat like ekko-bedat ,           "Purchasing Document Date
          matnr like ekpo-matnr ,           "Material No.
          netwr like ekpo-netwr ,         "Net Order Value in PO Currancy
          meins like ekpo-meins ,           "UOM
          chk(1) ,
          light(1) ,
          change like ekpo-menge ,
          end of it_final .
    **select option Declaration
    selection-screen begin of block block.
    select-options: s_ebeln for ekko-ebeln  .
    selection-screen end of block block .
    selection-screen begin of block block1 .
    parameters:grid radiobutton group r .
    parameters:list radiobutton group r .
    selection-screen end of block block1 .
    at selection screen
    at selection-screen .
    select single * from ekko where ebeln in s_ebeln .
    if sy-subrc <> 0 .
       message e000(8I) WITH 'No Data Exists' .
    endif .
    start-of-selection .
    if grid = 'X' .
    perform get_data .
    perform event using i_event[] .
    perform field using fieldcatalog[] .
    perform layout using i_layout .
    perform grid_display .
    endif .
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    form get_data .
    *DATA Retrieval from tables
    SELECT EKKO~EBELN
           EKKO~BEDAT
           EKPO~EBELP
           EKPO~MATNR
           EKPO~NETWR
           EKPO~MEINS
           EKPO~MENGE
           EKPO~BPRME
           INTO CORRESPONDING FIELDS OF  table IT_FINAL
           FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
           WHERE EKKO~EBELN IN S_EBELN.
           APPEND IT_FINAL.
    endform.                    " get_data
    *Getting the Event for Top of Page display.
    *&      Form  event
          text
         -->P_I_event[]  text
    form event  using    p_i_event type slis_t_event.
      clear p_i_event .
      refresh p_i_event .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
       I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = p_i_event
    EXCEPTIONS
       LIST_TYPE_WRONG       = 1
       OTHERS                = 2
    read table p_i_event with key name = slis_ev_top_of_page into i_event.
          if sy-subrc = 0.
                 move 'TOP_OF_PAGE_PO' to i_event-form.
                 modify p_i_event from i_event index sy-tabix transporting form.
          endif.
          clear i_event.
    endform.                    " event
    *Display Top-of –Page Details and Logo
    form top_of_page_po .
           clear i_header .
           refresh i_header .
           write sy-datum to text.
           i_header-typ = 'H'.
           i_header-info = 'PURCHASE OREDER DETAILS'.
           append i_header.
          *Logo Display
          CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
                 EXPORTING
                     it_list_commentary       = i_header[]
                     I_LOGO                   = 'ENJOYSAPLOGO'.
    endform .
    *Field Catalog Append
    *&      Form  field
          text
         -->P_fieldCATALOG[]  text
    form field using  p_fieldcatalog type slis_t_fieldcat_alv.
         clear fieldcatalog.
          fieldcatalog-fieldname   = 'EBELN'.
          fieldcatalog-seltext_m   = 'Purchase Order No'.
          fieldcatalog-col_pos     = 1.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'BEDAT'.
          fieldcatalog-seltext_m   = 'PO Date'.
          fieldcatalog-col_pos     = 2.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'MATNR'.
          fieldcatalog-seltext_m   = 'Material No'.
          fieldcatalog-col_pos     = 4.
          fieldcatalog-outputlen   = 20.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'NETWR'.
          fieldcatalog-seltext_m   = 'Net Value '.
          fieldcatalog-col_pos     = 5.
          fieldcatalog-outputlen   = 20.
          fieldcatalog-do_sum = 'X'.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'MEINS'.
          fieldcatalog-seltext_m   = 'Units'.
          fieldcatalog-col_pos     = 6.
          fieldcatalog-outputlen   = 4.
          append fieldcatalog .
          clear fieldcatalog.
    endform.                    " field
    *&      Form  layout
          text
    form layout  using    p_i_layout TYPE SLIS_LAYOUT_ALV .
    i_layout-zebra  = 'X'.
        i_layout-lights_fieldname = 'LIGHT'.
        i_layout-lights_tabname = 'IT_FINAL'.
        i_layout-box_fieldname = 'CHK'.
        i_layout-box_tabname  = 'IT_FINAL'.
        i_layout-edit = ' '.
    endform.
    *To display Buttons in the MENU BAR if needed
    FORM SET_PO_PF_STATUS USING  P_I_EXTAB TYPE
                     SLIS_T_EXTAB.
                     SET PF-STATUS 'MENUPO'.
      ENDFORM.
    *Event for Interactive display of ALV report
    form USER_COMMAND  using r_ucomm like sy-ucomm
                             rs_selfield type slis_selfield .
      if r_ucomm = '&IC1'.
      READ TABLE IT_FINAL  index   rs_selfield-tabindex.
      write:/ IT_FINAL-ebeln.
      endif.
    endform .
    *Parameters of FM  REUSE_ALV_GRID_DISPLAY
    *&      Form  grid_display
          text
    -->  p1        text
    <--  p2        text
    form grid_display .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        I_CALLBACK_PROGRAM                = SY-REPID
       I_CALLBACK_PF_STATUS_SET          = 'SET_PO_PF_STATUS'
        I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
        IS_LAYOUT                         = I_LAYOUT
        IT_FIELDCAT                       = FIELDCATALOG[]
        IT_EVENTS                         = I_EVENT[]
      TABLES
        t_outtab                          = IT_FINAL.
    endform.                    " grid_display

    *& Report  YSDBALV1
    REPORT  YSDBALV1.
    tables: ekko , ekpo .
    type-pools: slis .
    Table for Display Header
    data:i_header type slis_t_listheader with header line.
    *Fieldcat Declaration
    data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
    *Table of Events
    data:i_event type slis_t_event with header line ,
         wa_event type line of slis_t_event.
    For Layout
    data:i_layout type slis_layout_alv .
    data: text(30) .
    *Internal Table Declaration
    data: begin of it_final occurs 0 ,
    ebeln like ekko-ebeln , "Purchasing Document No.
    bedat like ekko-bedat , "Purchasing Document Date
    matnr like ekpo-matnr , "Material No.
    netwr like ekpo-netwr , "Net Order Value in PO Currancy
    meins like ekpo-meins , "UOM
    chk(1) ,
    light(1) ,
    change like ekpo-menge ,
    end of it_final .
    **select option Declaration
    selection-screen begin of block block.
    select-options: s_ebeln for ekko-ebeln .
    selection-screen end of block block .
    selection-screen begin of block block1 .
    parameters:grid radiobutton group r .
    parameters:list radiobutton group r .
    selection-screen end of block block1 .
    at selection screen
    at selection-screen .
    select single * from ekko where ebeln in s_ebeln .
    if sy-subrc <> 0 .
    message e000(8I) WITH 'No Data Exists' .
    endif .
    start-of-selection .
    if grid = 'X' .
    perform get_data .
    perform event using i_event[] .
    perform field using fieldcatalog[] .
    perform layout using i_layout .
    perform grid_display .
    endif .
    *& Form get_data
    text
    --> p1 text
    <-- p2 text
    form get_data .
    *DATA Retrieval from tables
    SELECT EKKO~EBELN
    EKKO~BEDAT
    EKPO~EBELP
    EKPO~MATNR
    EKPO~NETWR
    EKPO~MEINS
    EKPO~MENGE
    EKPO~BPRME
    INTO CORRESPONDING FIELDS OF table IT_FINAL
    FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
    WHERE EKKO~EBELN IN S_EBELN.
    APPEND IT_FINAL.
    endform. " get_data
    *Getting the Event for Top of Page display.
    *& Form event
    text
    -->P_I_event[] text
    form event using p_i_event type slis_t_event.
    clear p_i_event .
    refresh p_i_event .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = p_i_event.
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2.
    read table p_i_event with key name = slis_ev_top_of_page into wa_event.
    if sy-subrc = 0.
    move 'TOP_OF_PAGE_PO' to i_event-form.
    modify p_i_event from i_event index sy-tabix transporting form.
    endif.
    clear i_event.
    endform. " event
    *Display Top-of –Page Details and Logo
    form top_of_page_po .
    clear i_header .
    refresh i_header .
    write sy-datum to text.
    i_header-typ = 'H'.
    i_header-info = 'PURCHASE OREDER DETAILS'.
    append i_header.
    *Logo Display
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary = i_header[]
    I_LOGO = 'ENJOYSAP_LOGO'.
    endform .
    *Field Catalog Append
    *& Form field
    text
    -->P_fieldCATALOG[] text
    form field using p_fieldcatalog type slis_t_fieldcat_alv.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'EBELN'.
    fieldcatalog-seltext_m = 'Purchase Order No'.
    fieldcatalog-col_pos = 1.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'BEDAT'.
    fieldcatalog-seltext_m = 'PO Date'.
    fieldcatalog-col_pos = 2.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MATNR'.
    fieldcatalog-seltext_m = 'Material No'.
    fieldcatalog-col_pos = 4.
    fieldcatalog-outputlen = 20.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'NETWR'.
    fieldcatalog-seltext_m = 'Net Value '.
    fieldcatalog-col_pos = 5.
    fieldcatalog-outputlen = 20.
    fieldcatalog-do_sum = 'X'.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MEINS'.
    fieldcatalog-seltext_m = 'Units'.
    fieldcatalog-col_pos = 6.
    fieldcatalog-outputlen = 4.
    append fieldcatalog .
    clear fieldcatalog.
    endform. " field
    *& Form layout
    text
    form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
    i_layout-zebra = 'X'.
    i_layout-lights_fieldname = 'LIGHT'.
    i_layout-lights_tabname = 'IT_FINAL'.
    i_layout-box_fieldname = 'CHK'.
    i_layout-box_tabname = 'IT_FINAL'.
    i_layout-edit = ' '.
    endform.
    *To display Buttons in the MENU BAR if needed
    FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
    SLIS_T_EXTAB.
    SET PF-STATUS 'MENUPO'.
    ENDFORM.
    *Event for Interactive display of ALV report
    form USER_COMMAND using r_ucomm like sy-ucomm
    rs_selfield type slis_selfield .
    if r_ucomm = '&IC1'.
    READ TABLE IT_FINAL index rs_selfield-tabindex.
    set parameter id 'VL1' field it_final-ebeln.
    call transaction 'ME23N'.
    endif.
    endform .
    *Parameters of FM REUSE_ALV_GRID_DISPLAY
    *& Form grid_display
    text
    --> p1 text
    <-- p2 text
    form grid_display .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    IS_LAYOUT = I_LAYOUT
    IT_FIELDCAT = FIELDCATALOG[]
    IT_EVENTS = I_EVENT[]
    TABLES
    t_outtab = IT_FINAL.
    endform. " grid_display
    Regards,
    Rusidar S.

  • Excel option problem in ALV report output.

    Hi,
    In the output of the ALV report, if I click the Microsoft excel button, the following error is occured.
    "View cannot be switched: Product is not installed or integration is not active".
    We are using SAP GUI 7 and patch level 12.
    Please advice what shall be done to overcome this.

    Hi
    Try this.....
    Open Excel, go to Tool->Macros-->Security
    And you will see a window, Make sure that the two options at the bottom of the window are checked. Save all, close window and try again.
    And when excel asks about enable or not macros always select enable macros.
    Hope this helps.....

  • Page breaks appear in the spool output of report when run in the background

    Hi All,
    Report is using fm 'REUSE_ALV_GRID_DISPLAY' to display the report. parameters passed to this fm for display are :it_fieldcat,is_layout,it_events,t_outtab.
    Page breaks appear in the spool output when report is run in the background.These page breaks needs to be removed. When executed in the background, the excel extract should be the same as if pulling directly from the report itself.
    How to remove the page breaks in background?
    Thanks & Regards,
    Abhishek Singh

    Hi
    You can use the below code , which the reprt run in background. If you run the report in background thenyou need to use  'REUSE_ALV_LIST_DISPLAY'
    if sy-batch = ' '.
    call 'REUSE_ALV_GRID_DISPLAY'.
    else.
    call 'REUSE_ALV_LIST_DISPLAY'.
    endif.
    if you are using OO alv then write this code..
    CALL METHOD cl_gui_alv_grid=>offline
    RECEIVING e_offline = off.
    IF off IS INITIAL.
    CREATE OBJECT g_custom_container
    EXPORTING container_name = g_container.
    ENDIF.
    Regards

  • What is an ageing report? What are the data sources used to develop an agin

    Hello BW gurus,
    I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
    Thank you.
    TR.
    •     Developed AR ageing report, created invoice layout and processed invoices.
    What is an ageing report? What are the data sources used to develop an aging report
    •     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts. 
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    •     Involved in the end to end implementation of BW at Reliance Group as a team member.
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
    a full life cycle project?
    •     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
    What are aggregates why do you need them?
    •     Prepared design documents from the Business Requirement documents and identified the
    relevant data targets for satisfying the customer requirements.
    What are the design documents does one prepare, please give an example. 
    Is cube a data target?

    What is an ageing report? What are the data sources used to develop an aging report
    Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
    customer (credit)  for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
    Requirement gathering, blueprint creation, development etc
    Refer to posts on Sap Methodology  and Sap lifecyle
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
    Please check these links
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    What are the design documents does one prepare, please give an example.
    Design document is basically a document to say  how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets  to be used and how data shld be stored  for providing the client a solution they need.
    Is cube a data target?
    Yes cube is a data target.
    Hope this Helps
    Anand Raj

  • Is anyone experiencing electrical discharges into the ears while using the iPhone 5 or 5S earbuds?

    I have been experiencing at first mild, then much stronger electrical discharge in my ears while wearing the iPhone 5/5S earbuds. I went back to the Apple store, where they immediately exchanged them for a new pair. Yet upon first use the same problem recurred, leaving me with lingering pain in my ears. This has never happened with any other earbuds before. I read that it's static electricity caused by excessive dryness in the air, polyester clothing, etc. none of these conditions applied to me.
    Are other people experiencing this problem?

    If I am not mistaken, the inablilty to use data and phone is a limitation of the LTE format. Not a Apple specific problem.

  • My mac book air suddely disconnects many times the wifi while using wifi

    my mac book air suddely disconnects many times the wifi while using wifi

    Lots of things can impact wifi connections.  If you are at the marginal edge of the wifi range (which depends not only on distance, but what's between you and the transmitter) you may find the connection dropping in and out.  Sometimes a minor repositioning of the computer or transmitter can solve the issue.
    As well, interference can also create problems.  For instance, microwave ovens are really good at disrupting 2.4Ghz signals, and that the frequency used most often in wifi routers--so if someone turns on the microwave and it's between you and the transmission point it won't be surprising if the connection drops.  As well, metal blocks the signal fairly effectively, so if (say) ductwork is between the CPU and the wireless router there can be problems.
    Finally, I've run into some combos of devices and routers that just don't seem to like each other :-) .  That said, I've not hit that problem with either Air I'm running (an 11" and a 13"), though obviously I've not tried to connect them to every type of router out there.
    Just this week I was at a hotel and in my room the hotel wifi was "interesting" with every device I tried (iPhone, Android phone, Kindle Fire, iPad and the two Airs) dropping connection regularly from the work desk.  Turned out if I moved the devices over to the nightstand on the other end of the room (not the best work environment) all of the problems went away, so it clearly was a signal issue and the exact layout of that room and the hotel's wifi.
    If the machine has a problem when positioned close to a variety of routers, then I'd suspect a hardware issue with the wifi card in the Air and get that checked by Apple.  Similarly, if your problem is with your home router, I'd check to see if other devices also are getting dropped, since there could be a hardware issue on the router.

  • How to schedule the background job using current selection screen field val

    Hello Friends,
    How to schedule the background job using current selection screen field values.
    after completion of the job the spool should be sent as a mail to SAP Inbox.
    Is there any way to create the variant dynamically by reading the current selection screen values.
    Thanks,
    Ravi

    Hi,
    To get the variant details you can use teh following FM.
    'RS_VARIANT_CONTENTS'.
    Regards,
    Ankur Parab

  • I need help running a Pandora app in the background while on the web

    I cannot run Pandora in the background while on the web

    If you create a console app and place it in a executable jar file, the program will run invisably, even if you have println statements. This is cos the jar file does not launch a console window, so no output will be displayed.
    Hope that is what you wanted

  • Live type files look grainy and do not fill the background when used for green screen backgrounds.

    live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

    What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
    The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
    The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
    The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
    Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

  • I can not connect to the internet while using my ipad I get a message saying Safari could not open the page because the server stopped responding need help thank you

    I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • TS1398 I can't connect to the internet while using wi fi on my iphone 4S.

    I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.

    LeeinSunnyIsles wrote:
    I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.
    If you have truly tried "everything" then there is no hope of it ever working again. However, have you tried rebooting your router?
    Have you tried Settings/General/Reset - Reset network settings?

Maybe you are looking for