Problem in Archiving for object FM_BEL_CA

Dear all,
Currently I am working on archiving project who still use the R/3 4.7. One of the problems of archiving Archiving Objects is the FM_BEL_CA
My questions to this objects are the following;
1. At test run of Write process in t-code "SARA", the system only show the document type that can or cannot be archived. Is it possible in the SARA that the result of Write process also mention the document nr?
2 Why the system request full authorization for all FM area?
3. Is there any way to specify the the archiving is specified for certain FM area only?
4. When I check the information Structure of this object, there is no Information structure for this FM_BEL_CA.
5. Is it mandatory to create information structure for this object?
6. What is the impact to the report on application side if we do not maintain Information Structure in the T-code "SARI"
7. Is there any support package in relation to this Object?
Is there anyone out there can help me?
Thank you.
Azni

Hi Ajay, thanks for your information.
I have tried to make the info structure recommended. In the process of info structure creation, there is no object FM_BEL_CA in the Object List. Is there any reason for this?
My next question, in practice is it a common to archive these object?
My question raise after I read Note 114628. The impact of archiving this object will make the archived data become loss from data base and no way to retrieve it. So, if there is any payment received on the following period or Fiscal year after the archiving key date, will make the payment posted as unassigned revenue/expence.
Please your support.
Thank you so much.
Azni

Similar Messages

CO_ITEM: write archive for object PSG is cancelled by system

Dear Experts;
I have one more problem in archiving project at my client using R/3 4.7.
On preparation for this archiving project, we have simulated all objects on "development server" and they went OK and we also have executed what was recommended by sap note nr 613707.
Now, we move to the next step to QA server where the data is mirroring to Production server. Here the comes the problem on "CO_ITEM". The problem is, the system cancel the write process for object "PSG". For your information, we have checked all the parameter such as;
- Technical setting
- Residence time for CO line items
When we check the log it says: "ABAP/4 processor: TSV_TNEW_OCCURS_NO_ROLL_MEMORY"
What does it mean and are we suppose to do?
Your advise and support is highly appreciated.
Thank you,
AZNI

Since you QA system is a mirror of Prod it contains large number of CO line items as compared to Dev environment. Due to the large number of CO line items the buffer size is getting exceed resulting in the dump.
Check the OSS Note 888292 - Archiving CO_ITEM for orders terminates
Hope this helps
-Samanjay

File attachment problem in Services for object XK03

In XK03 when i try to create a attachment using Services for object icon it is giving an error message in SAP ECC 6.0 after selecting the file from the folder.
"Error occurred during import"
Error occurred during import
Message no. SO424
Diagnosis
An error occured during the import of a file.
System Response
The import was not carried out.
Procedure
If the document is still open in the application, you need to close it before you carry out a new import.
This error message may indicate a SAP-GUI problem. The cause could be an error during data conversion, for example. Report the error to your system administrator.
Does anybody knows about this...
thanks,
fractal

Hello Fractel,
Are you get rid of this issue?
We have just implemented some of SAP packs/patches and few users face this issue.
When I tried the same, I did not face this issue.
Please suggest.
Regards,
JPS

Creating a new Infostructure in archiving for Object PM_ORDER

Hi Guru's,
The SAP standard infostructures used when archiving PM Orders do not include 'Order Type'. I have created a new Z infostructure and included the Order Type in the field catalog and new infostructure but it doesn't get populated at the point of archiving. Does anyone know why not ? or how I can fix this ?

Hi Ben,
Has your custom archive infostructure been activated? Also, the infostructure gets populated during the delete phase of the archiving process, not the write phase. Have you tried manually filling the structure? If so, what does the joblog show? Does the tablespace the infostructure is in have enough space?
These are some things to check.
Hope this helps.
Best Regards,
Karin Tillotson

Query waiting for objects...

Hi,
I have a Pl/Sql query which when run is taking a long time to execute.
When i put a trace on it, i found that it is waiting for 2 objects and as soon as the wait is over the query produces the output immediately.
I tried puuting index on tables which had large records as i thought initially that it might be waiting due to full table scan, but its not of much help.
Earlier this query used to run within 5 minutes some 3 months back, but now it is taking about 1 hour daily and when the trace is on, it shows again it is waiting for 2 objects.
What im thinking is that, earlier when the query used to run within 5 minutes the data involved was not that heavy, but since the last 2 months the data is in millions every month.
Could you suggest me a possible solution to this problem of waiting for objects.
Thanks.
Database version being used - Oracle 10g

Hi,
When i put a trace on it, i found that it is waiting for 2 objects and as soon as the wait is over the query produces the output immediately.'it is waiting for 2 objects?' What exactly do you mean by that?
If you've done a trace then why didn't you post the tkprof output?
Please post the tkprof output (including wait events) and your PL/SQL procedure (or a representative piece of sample code)
Put this tag => before and after your tkprof output/code examples, so it says readable.

Attachment not shown in MIRO (service for objects)

We have a problem with services for object in MIRO transaction.
There's no "service for objects" icon in MIRO transaction, and through menu ("System=>Services for objets") we get this message:
"No service available".
But there's an entry with that object ID (invoice number) in table TOA01 with object type BUS2081 (Incoming invoice), which means there's A link for that object ID.
We checked customizing and compared it to other systems where it's fine and seems ok.
Can't understand why it doesn't work. Something missing in MM?
I'd really appreciate any clue.
Thanks in advance.
Regards,
J

Thanks for answering.
Well, we have same archivelink customizing in another systemo for MIRO transaction and it works fine.
There's a development, of course. There's a job that executes a program and attaches the pdf from a server, etc.
So we can attach pdf files when entering an invoice. Guess there's a missing step, but don't know exactly which.
Maybe basis people blocked something, but we don't have a clue.
Regards,
J

Archiving Object - Entry missing in Customizing table for object Z*********

Hello friends,
We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
"Entry missing in Customizing table for object Z******* "
I have matched my object with few other archiving objects and things looks similar.
Have you faced this kind of problem..
thanks
ashish

Hi,
I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
But when i enter ZSCS_TRAFO, i get this error :
Entry missing in Customizing table for object ZSCS_TRAFO
Message no. BA057
Diagnosis
A function cannot be executed due to a missing table entry.
Procedure
Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
However, a few other Z objects works well.
thanks
ashish

Problem with Java Memory "Could not reserve enough space for object heap"

Hi gurus,
I am not an expert with Java´s configuration, and I have a situation that I don´t understand. First of all, I am working at Centos 6.2 with jdk_1.6 and Tomcat 7.
The problem is...
- If I run Tomcat with JAVA_OPTS="-Xmx128m"* (at catalina.sh) all works fine.
- If I run Tomcat with JAVA_OPTS="-Xmx512m"* (at catalina.sh) an error appears:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
This appear when I run java -version or when I try to stop Tomcat, and the Tomcat isn´t able to stop.
The strange thing is that my server has more than 200M free in physical memory. So, why Tomcat isn´t able to stop? and Why Java doesn´t use the free memory in my server?
Thanks in advanced.

Hello EJP, thanks for your answer.
I have explained bad.
The server has 703M free when Tomcat is stopped. I had mentioned that my server has more than 200M free in physical memory when Tomcat is running with JAVA_OPTS="-Xmx512m", so I don´t understand why these errors appear.
Do you understand me?
Recently I have checked the swap memory, and it is disabled. In spite of swap memory is disabled I think java wouldn´t need this memory because it has free physical memory
Thanks again.

BP Creation Problem in Web UI for object BU_PARTNER-Answers would rewarded

Hi CRM Experts,
Need a help immediately.
Currently am working on CRM 5.2.
In SAP UI when I am creating a BP Type Organisation or Person system allows me to create But when i do the same in WEB UI i am having problem.
In Web UI when i am selecting New Account and creating New Corporate Account or Individual Account with Grouping and Role i am getting an error message as " For object BU_PARTNER , number range interval AB does not exist"
Message no. NR 751
Diagnosis
For object BUPARTNER , number range interval AB does not exist
Message no. NR 751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
I have already assigned number range interval because of which i could create and save BP in SAP UI where as am facing this problem in creating BP only in Web UI.
Do i need to do anything in SNRO? Please explain clearly what should be done to resolve this issue?
Let me remind you again that i could create and save BP in SAP UI without any issue.
Do i need to make setting for the message"settings are only in client 000"
Regds...Arup

this problem you will face if you don't select grouping in CRM webclient 5.2 while creating BP.
In my case the field was missing in Webclient due to which system was unable to get the number range for the transaction which was hidden. you need to make it visible with the help of T-code-nbsp_wd_cmpwb.
Please let me know for any clarification.
you take abaper's help for this as well.
Regds...

Detemining the free space for each tables before Archiving an object.

Hi Everyone,
I want to know,how can i get the information about the how much space will get free from each table which is related to an archiving object before i perform
archiving on that particular object.
Are there any transactions for the same, or some transaction which can be related to these.
eg:FI_DOCUMNT is related to lots of table, before i archive this object, i want to know that space that will be free from all the tables individually which are affected by this object.
Regards,
Nipun Sharma

Hi Nipun,
as far as I know: there is no easy tool to get this numbers. But on the other hand, you don't need exact numbers, estimations will do.
It's a good idea to start with the biggest objects: take DB02, make a detailed analysis where you select the biggest tables -> corresponding archive objects should be your main focus (for the beginning).
Count for the biggest tables in each objects the entries per year (or month, whatever periods you are interested in). Most tables have creation date to do so, otherwise go for number range. For some numbers you could search the creation date, the rest is estimation again.
Then you will have an idea, which volume was created in which time frame.
Still you need some test archive runs (in PRD or an (old) copy, at least for an example amount of data): you need to know, which % of the documents can technically be archived, how much will stay open because of missing closing. That's critical information (maybe 90% will stay in system) and can only be analyzed by SARA test runs - if you identify the missing object status, you can go on selecting this directly, but in the beginning you need the archive run.
With the volume / time frame and the percentage, which can be deleted you should be able to give estimations based on current total object size. Make clear, that you talk about estimations: every single object will be checked for having correct status - before this isn't done (in a test run), no one can tell exact numbers.
Hope, this will help you,
regards,
Christian

No archive information found for object type and document type

Hi All,
When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type and document type"
Diagnosis
    No information was found about optical archiving. This may be due to
    either of the following reasons:
    1. No valid archiving parameters were passed
    2. Your system is not configured for optical archiving
System Response
    Processing is cancelled.
Procedure
    Specify valid archiving parameters or check whether your system is configured for optical archiving
Regds,
CB

Hello,
You are trying to Print & also archive by selecting the option Print & Archive.
You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
Hope this will give you some understanding on archiving area.
-Thanks,
Ajay

Facing problem in Number Range Allocation for Objects in OM

Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
Tharak

Hi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu.

Services for Object in VF02 & VF03

Hi All,
Attaching a document through "Attachment list" option by the "Services for Object" icon in VF02. however some options are grayed out. Please read through for the explanation of the problem.
1) Go to transaction VF02.
2) Input a billing document and press Enter.
3) Click on "Services for Object" button and a dropdown list opens which has the following options -:
a. Create
b. Attachment list
c. Private Note
d. Send
e. Relationships
f. Workflow
g. My Objects
h. Help for Object Services
However the option "b" and "e" (i.e. Attachment list and Relationships) are grayed out. Can anyone please help on how to activate the above mentioned options. Is it done by BASIS team. Please help.
PS: "Services for Object" icon is found exactly BELOW the "Enter" (green tick icon in the top left) button.
Thanks & Regards,
Himanshu Bhusan Sahoo.

Hello,
Please check the roles related to the below authorization object.
Authorization Object
S_WFAR_OBJ
Value
NV
Value
VBRK
Value
YP3INVOICE
Value
03
archiving Related role will give you access to View the billing document in PDF.
Thank you
Regards
Bala

Content server for Document attachment through "services for object" Icon.

Guys,
I have typical problem in installation of Content server for storing external documents.
We all know that we can attach the document in SAP using the icon SERVICES FOR OBJECT. By this we can attach the document to the specific object we want.
-Since my client wants only document attachment method not to completely implement SAP DMS, I proposed this method of attaching documents through services for object method.
-If documents are stored though services for object ,The attached document will directly get stored in sap database(correct me if I am wrong) while in DMS it ask you to select the storage location while u check in for any document
-By storing the doc thru "services for object " For long run when we store the documents in sap database our system will drastically get slow down.
-In this regard I have a plan to incorporate external storage server.
-Now I should know that how I should customize content server configuration so that the attachment through services for object will store into this content server I need to know how to define Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port. (OACT & OAC0)
I appreciate for immediate solution and Points will be rewarded for sure.
Regards,
Murali.S

Hi Murali,
Don't Worry, its possible,
All attachments can be stored in SAP Content Server also, but through archiving process.
Set up a database storage system.
Preparation
Make sure that the HTTP plugin is active.
Transaction SMICM, "Display Services" function key (shift F1)). The list of services must contain a port other than 0 for HTTP.If not, you must adjust the relevant profile parameter.
Typical entry:
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
If no user is defined, then use transaction SU01 to create a new user. Use the "System" user type.Assign
the SAP_ALL and SAP_NEW profiles to the user. (Eg: HRUSER/PLMUSER/PPUSER etc)
Transaction SICF, select: default_host - sap - bc -contentserver. Select the function to display/change the service. Make sure that a user is defined.
Using the relevant data from the newly created user, maintain the anonymous logon data for the
/default_host/sap/bc/ service and save & activate the changes in transaction SICF. Double click on content server and give the user name which has been created (HRUSER/PLMUSER/PPUSER/MMUSER etc)
Check the system PSE.
Start transaction STRUST. Expand the system PSE. The system PSE must be "green" for each application
server.
Determine a suitable exchange directory.
The exchange directory must be accessible from each application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application server (for example,
server\share) is sufficient. You can generally use the global directory
(profile parameter DIR_GLOBAL).You can use the RSPARAM report to determine the profile parameters.
Setting up the storage
Create a table for storing the data. Using transaction SE11, create a copy of the SDOKCONT1
table. If you want to create the repository database, you can name the table ZCONT_DB, for example. Save the
table as a local object. Activate the table.
Create a repository.
Use transaction OAC0 to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, Z1
DocArea: ARCHLINK
Storage type: R/3 database
Storage subtype: normal
Version no. : 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Make sure that the exchange list ends with a \ (or /on Unix).If you are using a variety of platforms, you must use transaction FILE to define a suitable logical file name and use this name. Save the settings.
1. Maintain view table TOAAR_C, via SM31
 Cross client table displayed as information, forget it
2. In field 'StSytm' you must entered 'Z1' as your system need, or anything that you need but you must configure HR Archive link too.
3. In field 'Arch.path' (direct above Spoolpath), entered path in your system, this real path in your operating system. May be you should confirm to your Basis consultant where exactly you could store picture files. So if you enter '/', your file exists at root directory at your UNIX system.
4. Choose 'File store' radio button
5. Save.
First
1. You have to create a number range for SAP ArchiveLink.
 IMG: Basis Components-> Basis Services -> SAP ArchiveLink -> Basic Settings-> Maintain number ranges
 (Trxn OANR). Create number range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
 IMG: Basis Components->Basis Services->SAP ArchiveLink->System Settings->Maintain document types
 (Table TOAVE, Trxn OAC2).
3. Document type HRICOLFOTO must be linked to object type PREL and Infotype PA0002.
 IMG: Personnel Management->Personnel Administration->Tools->Optical archiving->Set up Optical Archiving
 in HR. (View V_T585O, no Trxn). In the first two columns there are minuses, the third (Date) has
 a plus - don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type
 PREL. IMG: Basis Components->Basis Services->SAP ArchiveLink->Basic Settings->Maintain Links (Table
 TOAOM_C, Trxn).
Test
Test the repository.
Use transaction SE38 to start the RSCMSTH0 report. Specify your repository (i.e. Z1) and start the test.
The report must run without errors. If no problems occurred, you can use the new repository with Archive Link after you carry out the Archive Link Customizing. If problems do occur, check whether one of the related
notes helps.
For More Details :
http://service.sap.com/archivelink.

NOTE:- Screen Shots are missing, i was not able to paste here, One more thing is we did this for uploading a PHOTOS into Content Server, Similarly you have to create a REPOSITORY and Z-TABLE to bring all the Attachments from all the selected Objects and then route them to the CONTENT REPOSITORY.
Your Senior ABAP guy would help you in this, if not i may try to help you more by monday.
Regards
Rehman
Reward Your Points if Satisfied.

Late Archiving for Contract Documents via OAWD.

Hi experts,
I am now configuring Late Archiving for Contract Documents but it seems that the document attachment cannot be viewed via J6NP/J6NY. My question is concerning the Business Object. When I use standard Business Object "BUS2095", documents are stored succesfully and documents can be viewed in J6NP/J6NY. But I cannot use BUS2095 because it only has Sales Document No as input. My users require fields - Sales Document No, Contract Start Date,Sales Organisation and Distribution Channel. Therefore I created a customized Business Object with those fields.These fields were taken from a new Customised Joint table between VBAK,VEDA and VBAP.
At OAWD, I am able to archive for the Document Type I created. It says that Document stored succesfully. But the problem is when I want to view the archive document at J6NP/J6NY, there is no attachments. I tested the J6NP configuration with BUS2095 and attachment can be viewed. But with my Customised Business Object, there are no attachments.
What must I look into and what do I need to check? I really need help here. Please..

Hello,
Can you check the configuration of OAC3?
Hope you have deleted the configuration of BUS2095 assignment to document type.
Instead, creation of new archivelink configuration for custom business object and assign to document type you have used earlier.
-Thank,
Ajay

Problem in Archiving for object FM_BEL_CA

Similar Messages

Maybe you are looking for