PROBLEM IN ASSIGNING DESKTOP TO A PARTICULAR USER
Hi Experts,
Iam facing a problem i.e
If iam assigning a desktop to a particular user the user is not reflecting any changes......
if iam keeping ***
then we are able to adapt the changes but i want only particular user to adapt the changes ..
how it is possible plz help me in this...
waiting for u r response.....
Regards,
Shilpa
Hi ,
If your are not sure about user name , use the wildcard pattern , but make sure you use only a single *
i.e
1)IF User = shilpa*
THEN Portal Desktop = dekstop path
2)IF User =* shilpa *
THEN Portal Desktop = dekstop path
Here 1st option will work , 2nd will not work. " use only a single * "
Regards,
Sunitha Hari
Similar Messages
-
How to assign theme for a particular user
Hi All,
I am new to portal development. I have make one theme Kuldeep_theme. I have already assign the rules and pages. But still its not working for the user given.
Kindly give the instruction to apply the theme to a user.
Thanks in advance
Regards,
Kuldeep VermaHi,
If you want to assign a standard theme to user means
goto Personalize -> Portal Theme -> Select the theme
to get the personlize option in your portal page (Top right side) assign eu_role to the user.
If you want to modify the theme and assign theme to particular user.
Themes:
System Administration
-->
Portal Display
-->
Theme Editor
-->
Choose a Theme
-->
Make Changes
If Any
--> Save It
-->
Desktop and
Display Rules
-->
Portal Content
--->
Portal Users
<--
Standard Portal
Users
<--
Copy [Default Frame
Work Page & Desktop]
<--
Paste it In a New Folder
Rename the Desktop
<--
1).Open The Renamed Desktop
2). Open Folder Themes (sys) and R.C
3).Add theme to DESKTOP.
4) Save it.
<--
Open ->portal Admin -> SuperADmin
<--
Open -> Master Role Collection
<--
Select a Role/user/group from Master Role Collection
<--
R.c on Renamed Desktop and add Portal Desktop To Expression".
<--
Open Renamed Dektop,Select the theme,
<--
Hit the Button "Set Default" (save)
<--
Logoff and Logon the Portal Page.
Regards,
Ramganesan K -
Correlating VPN assigned IP address with particular users - CSACS and ASA
We have an ASA running 7.0(6)8 and use CSACS v4.1
For remote access, we have VPN groups set-up on the ASA. Our remote users connect to our network, are authenticated via the CSACS server, then are assigned an IP address from the relevant address pool on the ASA.
At the moment, I can use "show uauth" on the ASA to determine which user has been assigned a particular IP address, as long as they are currently connected.
But, what I'd like to be able to do is determine which user had an IP address at a particular time in the past.
E.g. if our device logs show activity from a particular IP address, I'd like to be able to trace back to find out which user had been assigned that IP address at the time.
Can anyone suggest how I might achieve this? I'm guessing that I need to set-up some sort of accounting between the ASA and the CSACS server but I'm not really sure what exactly is required.
Any help/advice would be appreciated. Thanks.hi, thanks for the advice, that sounds good.
Do you know the exact commands required to achieve this on the ASA? It doesn't seem to have the same set of aaa commands as found on e.g. an IOS router so I'm not entirely sure what to configure.
E.g. on my ASA, the aaa accounting options are:
aaa accounting ?
configure mode commands/options:
command Specify this keyword to allow command accounting to be configured
for all administrators on all consoles
enable Enable
exclude Exclude the service, local and foreign network which needs to be
authenticated, authorized, and accounted
include Include the service, local and foreign network which needs to be
authenticated, authorized, and accounted
match Specify this keyword to configure an ACL to match
serial Serial
ssh SSH
telnet Telnet -
Problem in assigning custom role to a user
Hi everyone,
Can anyone tell me how to assign a custom role to a user?
I have created a set of IViews which are assigned to a workset and the workset is assigned to a new role.
I assign this new role to my user account.
But, I am not getting the role which I have assigned to my user account.
What am I missing???Hi Daya,
Check the below links:
[Setting up Portal Roles|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ba66fd-3c4e-2a10-1090-e1217a92c147?QuickLink=index&overridelayout=true]
Step by step guide to create roles and worksets. [Wiki blog|http://wiki.sdn.sap.com/wiki/display/EP/Makeiview,workset,pageandassignrole]
Check the [help.sap|http://help.sap.com/saphelp_nw70/helpdata/en/1e/89570091620b428807f5bce4b45e7f/frameset.htm] document to get idea about Portal Content Objects.
Regards,
Anand G -
Problem with BP. Assignment: Business partner person to user not unique
I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
JorgeHi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
How to assign the status profile to that particular user..?*
Hello Everyone..
I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
Now My problem is ,How to assign the status profile to that particular user..?
so that only the user is allowed to change the order.
ThanksHi,
Maintain authorization key (authorization code) in status profile.
We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
We assign T.codes to role and assign role to user.
Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
Click on authorization data .
Expand the Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
Click on Authorization key button, assign Authorization key.
Click on status profile. assign status profile.
Regards,
Chandra -
How do i assign new portal desktop to the specific user or group?
Hi all
I created new portal desktop, and i want to assign it to the specific user or group.
Can anybody help me regarding this.
Help appreciated
Thx
PRadeepHi Pradeep.,
1. add a new 'IF' rule.
2. Edit it in the edit section (above the 'IF's part) to 'user' (in the dropdownlistbox) = <userid> (free text).
3. Press 'Apply'.
4. Edit the 'Then' section of the new IF to show the new portal desktop. You can add the full desktop's id by right clicking on it in the 'browse content' section if the screen (where you opened the Display Rule from) and choosing 'add portal desktop to expression'.
5. Press 'Apply'.
6. Move your 'IF' up. Display rules are evaluated from top to bottom until the first one that applies.
Hope that helps,
Yoav. -
Events assignment to particular users in LMS 4.2.2
Hi,
Is it possible to assign events that are raising in LMS to particular users .
Is it possible to track the events in LMS 4.2Hi ,
You need to define operations and collector to achieve your goals.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/navigation/Guide/lms42_nav_guide/ipmtask.html#wp1076863
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-adhocdvmg.html
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-collectors.html
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-operations.html
Thanks-
Afroz
**Ratings Encourages Contributors *** -
Problem in assigning users to groups.
Hello,
After upgrading to EP 6.0 when try to add users to the groups we are getting the following error
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: com.sap.portal.heartbeats.PortalHeartbeat - user: Guest,
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.heartbeats/components/PortalHeartbeat)
#1.#82A8E000B002007300000035001A50D400048912426E7075#1276611423793#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#philippe.lerch#1376##n/a##e1de2253788511df80f482a8e000b002#SAPEngine_Application_Thread[impl:3]_22##0#0#Error##Java###04:17_15/06/10_0052_27056650
[EXCEPTION]
#1#com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.UserManagement/high_safety/com.sap.portal.usermanagement.admin/components/UserAdmin)
Regards,
VamshiVamshi,
It is a permissions issue, your guest user does not have the necessary permissions to do the task that you are trying to accomplish.
1. Navigate to the path shown in the error com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.heartbeats/components/PortalHeartbeart and add the permissions
for the guest user here.
or
2. Try assigning the groups with a user administrator role.
Good Luck!
Sandeep Tudumu -
Portal: Tab displayed but not assigned to any roles of user
HI Experts,
I have a problem need your great help.
When I logon portal as a specific user, there are 5 tab in home page. When I check the role list, 3 tabs doesn't assigned to any roles this user owned.
Then I try to copy current user into a new user, and logon in . There are only 2 tabs left, which belonged to assigned role.
How those 3 tab assigned into this user? Can we assign iView/Page/Workset directly to user without role?
Any suggestion appreciate. Thanks so much!
Edited by: Jalyn Liang on Nov 13, 2009 9:29 AM
Edited by: Jalyn Liang on Nov 13, 2009 9:30 AMJalyn Liang ,
You can find if the user id belong to a particular group with the following ways,
Log in as an admin and go to User Admin -> Users- > Seach -> Enter the user Id and serach for the user -> Select the 5th icon with the tool tip ->Assigned Groups"
or
User Admin -> Group -> Search for the group.
or
You can use UME API to find out whether the is belowng to a group though coding.
Ram -
Role not appearing in TLN for a particular user in portal
Hello All,
We are working on Federated Portal Network. We are facing problem where a user is not able to view a particular role assigned to him in Top Level Navigation in consumer portal. There are many users assigned to the same role and for them its visible. This problem is arising for this particular user only.
Steps we took to resolve the issue are:
1)Unassigned and then again reassigned the role to the user.
2)Cleared the consumer cache.
3)User tried to login from another machine but still found the same issue, so local machine settings are ruled out.
Suggest some solution.
Regards,
Priyanka SinghHi,
Give the enduser permissions to that user for that role and check.
Regards
Basha -
Ship-To Address not getting picked for one particular user
Hi SRM Gurus,
I am working on SRM5.0 system with ECC6.0 as backend.
For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
Can anyone tell me why this is happening for one particular user?
Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
Can anyone help me out?
Thanks n Regards,
AncyShip to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
now , when I am trying to create a SC and I have tried to add delivery address bby 2 types .
1. By adding through the portal
2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
I have also made it default however when I raise the SC it again shows me as blank :
I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !! -
Error while assigning an application to a user
Hi All,
I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ERROR: VIRTUAL PATH IS NULL" and when i wanted to assign the Sample application to a user through the user page, i got "Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10050: Rollback failure: java.sql.SQLException: Io exception: Connection reset by peer: socket write error "
So can any one help me how to resolve this error so that i can assign the application to a user?
Any help is welcomed.
ShrikantThanks Scott. I've also been looking for a pattern of consistency that would point to the cause of the problem but have been unable to find one. I was hoping that others may have experienced the same error and could help to shed some light here.
I dug around some and found that the wwv_flows_alias_idx constraint is a unique index on the alias and security_group_id columns of wwv_flows. My application has an alias that is the same for all installations so I thought that somehow a previously used value for security_group_id was being generated causing the unique constraint violation. Can you tell me how that value is generated during the install process? Is it some sort of hashing function?
Thanks -
Workitem not going to a particular user id
Hi,
I am having a workflow container element APPROVERLIST which stores the ids of the users to whom a particular workitem should go. But for a particular user id , the workitem is not going to that person, rather it is going to some other user ids. I checked if that id has been substituted but that is not the case.
Are there some other areas where I can check exception?
thanks in advance.
AbhishekDear all,
I have checked all the above scenarios.
There is no excluded agent existing . The bindings are correct. Let me describe the scenario little bit more in detail.
APPROVERLIST is a workflow container element ( multiline ). This container element is populated in a particular task. This task fetches the user ids from a table and stores it here.
In the next task which is a foreground task, in the "agents" APPROVERLIST is mentioned against EXPRESSION , so this workitem will go to all the users who are in APPROVERLIST.
Agent assignment is maintained correctly. Its not working for one particular id. Is there any place to check this outside the workflow design?
Also I checked the user id, it is existing.
regards,
Abhishek -
UI elements not being displayed for a particular user
Hi,
I designed two i/p fields and text view for the same in a view. All are static UI elements and no visibility property is set.
This view is displayed as a popup when i press the button in the main view.
This is working fine for all the users in production except for one user.
This particular user is able to see only one input field and the corresponding text view.The other i/p element is missed here.
The whole component is displayed in a portal as a tab with other components in the adjacent tabs.
Please help me out to resolve this issue.
Is this problem is related to webdynpro abap? or
Is this a portal issue?
Regards,
Bala.Hi balamurugan ,
may be check the user setting for the User id .
right click on the view click user setting . and check whether he hide that button .
look at the pic.
http://i46.tinypic.com/x3cyf9.jpg
If any UI element is made invisible it will show the option invisible elements .
you can restore it .
http://i46.tinypic.com/2vjpraf.jpg
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on May 28, 2010 4:59 PM
Maybe you are looking for
-
help me my apps won't update when i opened the app store and tap updates nothing shows up i can't update my apps.
-
External HD (Lacie d2 Quadra 500GB) random disconnects
Hi! I have a problem with my external HD (Lacie d2 Quadra 500GB). The problem occurs since the 10.6 upgrade. My external HD is disconnected every few minutes. Sometimes I only see one partition, but most of the time both partitions (one of them is my
-
Simply put, I do not like like the new color coding "dots" and I do not like having to press the Command key before double clicking to open files in a new window. How hard would have been to include the old version of these two features?
-
Special effects editing question for iMovie '09
Hi, I understand that iMovie '09 doesn't support many (any?) add-on software packages for special effects editing. Meanwhile, I'm editing some sports clips in iMovie '09,, in which I'd love to have a "spotlight" on a player, (where the other action/b
-
'There is a problem with this Windows installer package'
iTunes won't install. I keep getting the following message midway through installation; 'There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or packa