Problem in copying the function module.
Hi All,
I have to Copy the standard function modules "FI_ITEMS_DISPLAY" and "ITEM_DERIVE_FIELDS".
The Function group for both of above FM is "FI_ITEMS".
What i did is I went to SE80 ,I copied down the Function Group 'FI_ITEMS' to 'ZFI_ITEMS'.
later on i copied the standard function modules 'FI_ITEMS_DISPLAY' and 'ITEM_DERIVE_FIELDS'
to the 'ZFI_ITEMS_DISPLAY' and 'ZITEM_DERIVE_FIELDS' resp.in the same function group 'ZFI_ITEMS'.
Then i made some changes to these copied modules (I did change the structure of it_items from RFPOSXEXT to ZRFPOSXEXT in ZFI_ITEM_ITEM_DISPLAY,and same change in ZITEM_DERIVE_FIELDS but for the parameter s_item).
And finally i activated these FM..and it got activated also.
But later on when i used these FM in my report...error occured saying that -
"The name of the function module to be called is "ZITEM_DERIVE_FIELDS".
but "ZITEM_DERIVE_FIELDS" cannot be found in its function group. "
hence i thought of activating the function group ZFI_ITEMS,which was inactive before to this...but when i tried activatin this FM it was giving hell lot of errors showing conflict occured at diffrent places,I think just because of the change (structure of IT_ITEM chnged from RFPOSEXT to customised ZZRFPOSXEXT).
I am helpless in removing all this errors ...
Can anybody suggest where did i go wrong?
And what is the right way to copy the function module.?
If possible reply me ASAP.
Thanx in advance.
Hello Sanjay,
First, delete your new function group and
Do like this:
1. copy FI_ITEMS_DISPLAY to zFI_ITEMS_DISPLAY from Se37. here you find a button on the application toolbar to do it. It also asks about the Function group. GIve the FG as
ZFI_ITEMS.
Activate all the related objects
2. same for the other FM. Use the same FG. and activate the related objects.
Regards,
Naimesh
Similar Messages
-
Copy the Function Module one server to another server
Hi Guy's,
Please help me How to copy the Function module from one server to another server.
Present requirement is like this, copy the FM from DRH-100 to NRH-100.
Thanks and Regards,
Saiif it is a zfm, u might have assigned a TR when cretaing this FM.so u need to relese this TR to the desired system.contact ur BASIS for the transport lanscape.
if it is a standard FM, u better copy this FM to a ZFM and make it as RFC enabled if it is not RFC enabled and call this ZFM from the system in which want to call this FM by giving the logical system id in the destination while calling this FM. -
Hi,
can you suggest me how can i copy the function group.
for example:Zfun_01 having 10 objects and i need all the objects to Zfun_02 function group.
I tried from SE80 but I didnt get copied.
Thanks,
Sriiii.Hi
Check the below thread the same issue is discussed
Re: Function-Group
Regards
Pavan -
Error while copy the function module
Hi,
When am copying the some standard FM into my z function module and when am checking the syntex error it throwing the error "REPORT/PROGRAM statement missing, or program type is I (INCLUDE).".
Can you suggest.Hi All,
Thanks for your help.
Finally i did by my own.
the problem is we need to activate their mail program and all include which we can see in goto>main program.
Amit. -
Problem in facing the function module
hi,
i am creating a batch schedule program where i am passing the po no. from one z-table and the delivery is going to be generated and distibuted to another server.
But i am creating the delivery through BBP_INB_DELIVERY_CREATE function module, but it is throwing the error message-"No deliveries posted ,no records to display"Hi,
This solution is only as assumption.
I feel that no line items have been passed to the delivery, so the message 'No record'.
Pls check in bapi debug if line items are being passed to the FM .
Regards
Sajimon Chandran -
Problem in copying std function module
Hi friends,
I have this std function module .
MS_PURCHASE_ORDER_REPORTING
i copied it to ZMS_PURCHASE_ORDER_REPORTING,till here everthing fine. In above std fm in tables tab we have
po_xdata like srv_mdrv.
i want to change it to po_xdata like zsrv_mdrv.
I mean i created one view zsrv_mdrv, so i want to replace above std one with my view.
when i try to copy im gettign error as:
tables paramete are absolete.
Please help me out ,its very urgent.
rgds,
vamsiRamya,
I created my own view, in that i have some fields which are not in srv_modrv view.
this zsrv_modrv has to be add in place of srv_modrv in function module which i have changed to zfunction module.
something im gettign tables parameters are obsolete something.
even i tried with by changing parameter name and seen, then also its not taking..
please help me . its very urgent. -
Client copy Locked function module
HI,
I'm trying to make a client from client 400 to 420.
The problem is that the function module is locked by the current user (the same running the client copy); Then when It can't deletes the FM it states that it already exists:
"G_GLDB_POSTING_A already exists (include LGIVAU01)"
Afterwards the job gets cancelled due to a system exception ERROR_MESSAGE
The weird part is that it just happens for this client 420. There is also a copy from 400 to 410 and it works without a problem.
Any help would be greatly appreciated.Hi,
You can check the client copy lock from SCC4 also, but it really matters if your client copy finished or not.
If you still see the client copy lock there then it seems your client copy is not finished properly. Try to login your new client 420 and start deletion using SCC5 and after that you can start/schedule new client copy during weekends.
Regards,
Manish -
Problem with i_buffer_active in the function module
i_buffer_active in the function module "REUSE_ALV_FIELDCATALOG_MERGE"
hi folks,
i am using this function module "REUSE_ALV_FIELDCATALOG_MERGE" to develop a field catalog....but teh problem is that when i use this i_buffer_active and if a assign value 'X' to that parameter .......teh entire structure is not getting copied in to teh field catalog ...........and when i comment the line i_buffer active ........teh entire structure i sgetting copied ..........so can u guys please with ur valuable suggestion, the program name is RFITEMAPHi!
Check out the program BCALV_TEST_BUFFER.
Regards
Tamá -
Problem in transfer rules-- Calling the function module.
Hi All,
when we r extracting the data from r3, the infoobject 0wbs_elem the data pulled is in internal format in which wbs element is stored.
wbs element gets stored in a different way compared to front end.
Eg. The external format is /abc/123 the internal format is 00012300.
I have written a transfer routine using the function module CONVERSION_EXIT_ABPSP_OUTPUT.
the code goes like this
data ifield(30) type c.
call function CONVERSION_EXIT_ABPSP_OUTPUT
Exporting
input = tran_structure-wbselem (Field in transfer structure---name of the field in source system) .
Importing
output = ifield.
result = ifield.
End of code.
Problem
When I am Scheduling the package the job doesnt get completed for a long time and fails.Is there a problem with the code. When trying for the Simulation of the datapackets, the system says no data package number could be determined.
Please help me out...
Thank You
MaheshHi Mahesh,
Could you please check ST22 and see if there is any short dumps ?
try to do test run for the FMs using SE37 and see what is the output for your input.
Do you have PSA for the load ? It may also have been deleted. You get this message when there is no PSA available.
hope it helps
Thanks
Soumya -
Problem with the function module SO_DOCUMENT_SEND_API1
Hi Friends,
I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
i Have maintained my code lines same as below.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = wa_doc_data
put_in_outbox = ca_x
commit_work = ca_x
TABLES
packing_list = tb_packing_list
contents_txt = tb_mailbody
receivers = tb_receiver.
Can you please tell me soultion ,
Thanks
charan.Hi charan,
If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
once try to pass below parameter also.
t_receivers1-rec_type = 'U'.
For configuring mail setup u need to sit with ur basis guy.
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM -
Problem in the function module HAZMAT_PRI_DATA_GET
hi all ,
This is related to the shipment.
we are trying to print a form with details of dangerous goods
but function module HAZMAT_PRI_DATA_GET not returning values of the dangerous goods details when the MOT is 05 ie; air .
The function module is a standard one,Is there any SAP-note for this ?
thanks in advance,
Naval BhattDear All,
When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
Thanks
Yogesh -
Problem in the Function module
Dear All,
I am using the ECC 6.0 with all the service packs applied. when i am creating a function module, i am getting an error like " Tables parameters are obsolete". My requirement is to get the internal table structure what should i do???
Thanks in Advance.
Yogesh.Dear All,
When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
Thanks
Yogesh -
Error during generation of the function module..need help urgently
Hello everyone,
m trying to generate data source in BWDevelopment.
After mapping all the BW fields to Source Object elements I click on Generate DataSource(for UD Connect) so following error comes
'An error occurred in step 1 during generation of the function module'
RFC connection is fine, error free and extractor is also fine.
Where could be the problem?
Thanks & Regards,
PriyankaHello everybody,
my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
This problem occurs with BW version 3.5 level 17 or below.
Regards,
Priyanka
Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM -
Not able to use Commit after the function module STATUS_OBJECT_CREATE
I am using function module STATUS_OBJECT_CREATE
CALL FUNCTION 'STATUS_OBJECT_CREATE'
EXPORTING
CHGKZ = 'X'
CLIENT = SY-MANDT
OBJNR = LV_OBJNR3
OBTYP = 'IWE'
STSMA = 'ZS_RE_01'
IMPORTING
OBJNR = LV_OBJNR3.
STONR = LV_STONR.
IF SY-SUBRC = 0.
COMMIT WORK.
ENDIF.
i am getting error after the COMMIT WORK .
I am not getting any issue in the function module .after the function module i am using the COMMIT WORK and i am getting the following error message
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLBSVU
Application Component CA-GTF-TS-SMT
Date and Time 03/17/2014 07:01:29
|Short text |
| The ABAP/4 Open SQL array insert results in duplicate database records. |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLBSVU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| An exception occurred that is explained in detail below. |
| The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught |
| in |
| procedure "STATUS_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING |
| clause. |
| Since the caller of the procedure could not have anticipated that the |
| exception would occur, the current program is terminated. |
| The reason for the exception is: |
| If you use an ABAP/4 Open SQL array insert to insert a record in |
| the database and that record already exists with the same key, |
| this results in a termination. |
| |
| (With an ABAP/4 Open SQL single record insert in the same error |
| situation, processing does not terminate, but SY-SUBRC is set to 4.) |
|How to correct the error |
| Use an ABAP/4 Open SQL array insert only if you are sure that none of |
| the records passed already exists in the database. |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB" |
| "SAPLBSVU" or "LBSVUU01" |
| "STATUS_UPDATE" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
| The exception must either be prevented, caught within proedure |
| "STATUS_UPDATE" "(FUNCTION)", or its possible occurrence must be declared in |
| the |
| RAISING clause of the procedure. |
| To prevent the exception, note the following: |
|System environment |
| SAP Release..... 702 |
| SAP Basis Level. 0010 |
| |
| Application server... "sds6ci" |
| Network address...... "11.224.101.53" |
| Operating system..... "Linux" |
| Release.............. "2.6.18-194.el5" |
| Hardware type........ "x86_64" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 17 |
| Shortdump setting.... "full" |
| |
| Database server... "gctsdb01lds.hsi.hugh" |
| Database type..... "ORACLE" |
| Database name..... "DS6" |
| Database user ID.. "SAPDS4" |
| |
| Terminal.......... "GCTEMP02VDI" |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 720 |
| created (date)... "Sep 14 2013 05:28:14" |
| create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 use-pr130820" |
| Database version. "OCI_102, 10.2.0.5.0, V2, default" |
| |
| Patch level. 500 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 720 |
| Operating system..... "Linux 2.6, Linux 3" |
| |
| Memory consumption |
| Roll.... 1317248 |
| EM...... 0 |
| Heap.... 0 |
| Page.... 0 |
| MM Used. 1242912 |
| MM Free. 53400 |
|User and Transaction |
| Client.............. 160 |
| User................ "DV018458" |
| Language key........ "E" |
| Transaction......... "SE38 " |
| Transaction ID...... "5323C30FC9364665E10000000BE06533" |
| |
| EPP Whole Context ID.... "002655EE0F241ED3ABB7D81260A28C44" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "SAPLBSVU" |
| Screen.............. "RSM13000 3000" |
| Screen Line......... 2 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLBSVU" - in "STATUS_UPDATE". |
| The main program was "RSM13000 ". |
| |
| In the source code you have the termination point in line 60 |
| of the (Include) program "LBSVUU01". |
| The program "SAPLBSVU" was started in the update system. |
| The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in |
| procedure "STATUS_UPDATE" "(FUNCTION)", but it was neither handled locally nor |
| declared |
| in the RAISING clause of its signature. |
| |
| The procedure is in program "SAPLBSVU "; its source code begins in line |
| 1 of the (Include program "LBSVUU01 ". |
|Source Code Extract |
|Line |SourceCde |
| 30| LOOP AT jsto_upd WHERE chgkz = 'X'. |
| 31| CHECK: jsto_upd-chgnr > '000', |
| 32| jsto_upd-stsma NE jsto_upd-stsma_old. |
| 33| CLEAR jcdo_tab. |
| 34| MOVE-CORRESPONDING jsto_upd TO jcdo_tab. |
| 35| MOVE-CORRESPONDING chdat TO jcdo_tab. |
| 36| jcdo_tab-stsma_new = jsto_upd-stsma. |
| 37| APPEND jcdo_tab. |
| 38| ENDLOOP. |
| 39|* Änderungen zu Einzelstatus (Insert) |
| 40| LOOP AT jest_ins WHERE chgkz = 'X'. |
| 41| CHECK jest_ins-chgnr > '000'. |
| 42| CLEAR jcds_tab. |
| 43| MOVE-CORRESPONDING jest_ins TO jcds_tab. |
| 44| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 45| jcds_tab-chind = 'I'. |
| 46| APPEND jcds_tab. |
| 47| ENDLOOP. |
| 48|* Änderungen zu Einzelstatus (Update) |
| 49| LOOP AT jest_upd WHERE chgkz = 'X'. |
| 50| CHECK jest_upd-chgnr > '000'. |
| 51| CLEAR jcds_tab. |
| 52| MOVE-CORRESPONDING jest_upd TO jcds_tab. |
| 53| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 54| jcds_tab-chind = 'U'. |
| 55| APPEND jcds_tab. |
| 56| ENDLOOP. |
| 57|* Verbuchung Statusobjekte |
| 58| DESCRIBE TABLE jsto_ins LINES sy-tabix. |
| 59| IF sy-tabix > 0. |
|>>>>>| INSERT jsto CLIENT SPECIFIED |
| 61| FROM TABLE jsto_ins. |
| 62| ENDIF. |
| 63| DESCRIBE TABLE jsto_upd LINES sy-tabix. |
| 64| IF sy-tabix > 0. |
| 65| field-symbols <fs_jsto_line> like jsto_upd. |
| 66| loop at jsto_upd assigning <fs_jsto_line>. |
| 67| IF <fs_jsto_line>-chgnr = '000'. |
| 68| <fs_jsto_line>-chgnr = '999'. |
| 69| ENDIF. |
| 70|* on change of status profile delete user status related to old profile |
| 71| IF <fs_jsto_line>-STSMA NE <fs_jsto_line>-STSMA_OLD. |
| 72| DELETE FROM JEST CLIENT SPECIFIED WHERE |
| 73| MANDT = <fs_jsto_line>-MANDT AND |
| 74| OBJNR = <fs_jsto_line>-OBJNR AND |
| 75| STAT LIKE 'E%'. |
| 76| DELETE FROM JCDS CLIENT SPECIFIED WHERE |
| 77| MANDT = <fs_jsto_line>-MANDT AND |
| 78| OBJNR = <fs_jsto_line>-OBJNR AND |
| 79| STAT LIKE 'E%'. |i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
objnr = objektnummer
obtyp = 'ORC'
stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
i_objectkey = objectkey
obtyp = 'ORC'
stsma = 'STATSCHEM'.
importing
objnr = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
objnr_old = objektnummer
objnr_new = objektnummer_neu.
commit work.
Notes -
How to create a secondary list of alv grid inside the function module
Hi All,
My requirement is to create a RFC function module to display the alv grid of one table.
i have created that.
while clicking on the records of the alv it should open the secondary list of another table.
My problem is it is not fetching the records of the internal table of the primary list since it is created inside the function module(FUNCTION...ENDFUNCTION).
pls help me on this.
Thanks in Advance.hi,
READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
here sel_sheet is the internal table for the primary list..
i called the function module "reuse_lav_grid_display" inside Function...Endfunction.
so when i am using READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
inside the user command perform therecords in this internal table is not populating..
pls help me on this.
thanks in advance.
Maybe you are looking for
-
Using Multiple AD domains with ACS
Hi, Is it possible to use multiple domains for authentication with ACS? I need to use AAA to authenticate remote users into a centralised location but the users will be from different domains and I was hoping to use a single applicance to cater for a
-
Hello together, after I installed a new workspace to my local apex installation with the oracle 10g express database i become the following error when i try to login into my apllications in the "old" workspace. The login into a application of the new
-
Kamran, You fill BinaryData with string representation of integer, while you need to use pointer to integer instead. Try this: SIZEOF_LONG: integer = 4; bdata : BinaryData = new; val: ui4 = 5000; pcode: pointer to ui4 = &val; bdata.SetValue(pcode, SI
-
Application not in my library..
I purchased an app and then purchased the PRO version. I see the PRO version purchase listed in my account info, but it's not showing up in my itunes. I don't know how to get it on my computer and then synced to my phone. I go round in cirlces trying
-
Dear All Experts, I am not from SD module but i have a query related to MRP Run. In our plant we have STO and it uses the 641 movement type. As i know During MRP Run STO is considered in net requirement calculation. It is the standard process. But in