Problem in excise duty

Hi Guru if i am creating sales order system giving below warning.i checked in chapter id this material is maintained for chapter id.
Maintain the chapter ID for material 17207081 J_1IMTCHID.how can i correct this errror due to this error excise duty not coming in sales order.
regards
ajit

that is also not maintained.so for that i have to maintain 1 for exc indicator.
Yes certainly.  If the excise value to flow in sale order, billing and excise invoice, then maintain 1 as I stated above.  Create a new sale order and check
thanks
G. Lakshmipathi

Similar Messages

  • Problem with Excise Duty tax calcualtion in Invoice

    Hi experts,
    Need your rexpert advise on the below issue.
    We have MM invoice where by the tax is not calucalted correctly.
    The Material is subject to excise duty, on the GR the excise invoice is getting generated with Cenvat clering account with correct amount towards excise duty
    i.e. GR is done for amount - 52951.33 and corresponding Tax code is KE(10% excise duty, 3% Ecess and 2% CST) which comes correctly as 6214.73 approximately which is correct in case of GR
    But however when the Invoice is posted for corresponding GR, the amount of tax calculated is only 1307.50, which should have been 6214.73 as the amount on the GR.
    We really are not able to find out why their is diffrences in the calculation of excise duty.
    Request your expert advise on this regard.
    Thanks.
    Shahid.

    System will fetch the duties from J_1IGRXREF table into MIRO transaction. So firstly check whether duties are correctly updated for the respective Excise invoice in the said table.
    Secondly ensure you have selected the correct tax code in MIRO same as PO tax code. There may be a chance that user had changed the tax code after posting the GRN in the Purchase order.
    Finally check whether the condition records are valid for the selected tax code in FV13 transaction code and are not set to deleted.

  • Problem with Excise duty Scenario

    Hi Experts
        my Scenario is  ,  i am gieving PO say to vendor A , he is procuring material from vendor B , now the excise invoice  , given by vendor B is  forwarded by vendor A , but vendor A is increesing the basic value value of material Say A buy material from B At prise 100 , and he is selling to us at prise 200  ,  , and giving the excise invoice given by vendor B
    and i have create PO for vendor A is of 200 inr , (and i am getting the Excise invoice on 100 inr provided by vendor B)
    so can you please tell me how to map this scenario for Excise invoice because system calculating Excise invoice on 200 inr

    Search for Dealer Purchase Scenario on SDN, Your scenario can be mapped by the same. You can refer some links as below,
    [Dealer Process|Re: Second stage dealer process]
    [Dealer purchase |Re: dealer purchase]

  • Excise Duty rate problem

    Hi all
    here is problem in excise duty rate miantanance in JIID. our are purchasing material from the same vendor with different excise duty rates (for Ex: one is 16% and other 12%) in the same plant. can any body suggest how to maintain different rates for the same vendor in J1ID.
    regards
    Siva

    Hi,
    Please try to maintain in J1ID as
    Exceptional Material Excise Rate
    Hope this may solve your problem.
    Regards,
    Kiran S Neve

  • Excise duty not loaded onto inventory for non excisable plant

    Hello
    I am facing a problem in excise duty flow. I have two plants, one excisable and second non excisable. one vendor is supplying the material to both the plants, so vendor is sending the invoice having BED, ECess & SECess for both the plants.
    For excisable plant all the duty values are flowing correctly, but for non excisable plant BED is getting loaded onto inventory.
    For non excisable plant, I have maintained conditions records al plant level for JMIP (BED Inv %), JMX2 (A/P BED Inv), ZECN (IN:ECess Inv %), JEC2 (ECess Inv Total), JSEI (IN: A/P SECess Inv), JHX2 (IN: SECess Inv Total).
    During MIRO, BED is not getting loaded onto inventory, while ECess & SECess is getting loaded to material.
    Pl suggest, where to check the settings or any settings for condition types, tax procedure etc.
    Thanks & regards'
    Manoj Gupta

    Hi,
       The system behaviour of posting to stock account is controlled by account key NVV. Go to OBQ3, in your tax procedure TAXINN (or copy of that procedure) check for the condition types which account keys are assigned.
    System will never discriminate that BED is not getting inventorised but ECess and Hcess on BED get inventorised.
    Regards

  • Excise Duty not picking automatically during posting of GR Document

    Hi MM
    I have a problem related excise duty calulation. During the posting of GR document for excisable material, excise duty, cess & Edcess not picking automatically, users put manully all the duty along with base value.
    I done the all excersie relate exsie, like matain condition type, J1ID etc.
    Pls help me, it needful for me.

    pl check in p.o that setoff cond of duties are maintained or not ,in FV11 , this was the same issue i had after mainaining the set off then during MIGO all values were autom. appeared.
    pl reward
    ok
    sap11

  • I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

    while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
    I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
    we are not going through SD configuration and I mentioned evrything in Tcode J1ID

    Chek SAP Note 951938 is applicable to you
    Regards
    Sanil Bhandari

  • Excise duty Problem

    Hi all
    We are having Taxinj procedure
    I have made a PO in which excise duties are maintained
    PO val  100 Rs
    Excise duty 14 ,2 ,1
    So total PO value is 147
    ,During MIGO User is changing Excise duty and not the base value
    And Posting the PArt 2 entries
    Where as in MIRO the excise duties are picked up from PO and not the one that is entered in MIGO
    so there will be difference of the excise duty amount that has to be paid to the vendor
    What is the solution to solve this problem
    We have also ticked GR based invoice verification in PO(Would be thankful if anybody will throw more light on GR Based in voice verfication check box in PO)
    Thankz and regards
    shailesh

    hi
    you can give cr or dr enteris in through G/L account accordingly in the MIRO (G/L Account tab)
    so you can give exact amount through G/L account

  • Basic Excise Duty problem at the time of PO genration( Dealer).

    Dear All,
    We are implmentation ECC 6.0 version.We are facing a problem in basic excise duty.I am genrating PO for dealer at that time excise duty should be in amount,this amount maintain in purchasing  condition.When we assign tax code with 0 % BED in po.BED could not copy from purchasing condition type.
    I think there was a Alternative Key (354) use in TAXINN  pricing procedure,but this could not work properly.This key was proper key or any other key use in prcing procdure.
    Any one suggest for right conclusion.
    Regards,
    Abhijit Kulkarni

    U r ? is not clear
    Hear is the process for delear case
    in Delear case u will have to maintain all the details as per raw material case
    only diffence is in the % of bed ecess and secess put 0 instade of 16 2 and 1
    at the time of po u know that u vendor will give u material at say 100 Rs increse of excise which u dont now and 4 % vat on it
    So u r po will loke like 100 basic
    bed 0
    ecess0
    scess 0
    vat 4
    total 104
    now whe u do GR
    u come to know u have 8 bed 1.6 ecess 0.8 sccess
    at the time of gr in Excise tab value
    put the excise base as 100-8-1.6-0.8 = 89.6
    and in bed 8
    ecess 1.6
    secess0.8
    and in header tab of excise in miscellaneous tab tick MRP indicator
    save ur part one and 2 posted
    then do the miro
    on item line it will show 100 as amount change it to 89.6
    click on calculate tax
    and ur excate payment of rs 104 will be done to vendor
    this the the correct process of Delear case
    Hope this is help full
    Reward if usefull

  • Manual Excise Duty problem

    Hi All,
    As per my requirement I am using Excise condition with condition record and it is working prefectly, but in some rare case i want to use manual excise duty where i want when i will use manual excise codition system must deactivate autmatic codition of excise. so that system only take manual excise not automatic condition type at that time.
    Regards
    Shambhu

    Hi Lakshmipathi,
    Thank you very much for your relay,
    I am using JEXP for autmatic condition with condition record in pricing procedure
    which is taking base value of JASS (Assessable Value) below that I maintain JMAN condition (Manaul with C as u said) it is also same taking base value JASS.
    Now in one rare case I want to maintain the Manual condition JMAN where in pricing JEXP is also coming with condition record, and I want when i maintain JMAN system should only consider JMAN not JEXP.
    Hope u got my requirement
    thanks for ur valuable time.
    Regards
    Shambhu

  • Excisie duty updation problem during RG1 register update

    Dear All,
    During updation od RG1 register, excise duty has not been updated in Rg1 register. Transactional entry updated but Exice duty/ ecs/ CEss is showing zero value.
    It happened with two materials only. all excise master data has been maintained for that material.
    What will be reason ?
    Your valuable reply is appreciated. Thanks
    Regards
    Mangesh

    Hi Mangesh,
    I hope you are using the std transaction J1I5 for RG1 Register update.
    Normally we update the RG1 Register using the material documents.
    So check whether for the material documents which you updated whether an excise invoice has been created or not ? because std - J1I5 transaction doesnt check the same.
    If you have updated the RG1 register after creating the excise invoice for the above materials doc's then excise value will be updated in the same.
    IF its not happening then check if any SAP notes are available.
    Hope its clear.
    Regards,

  • Excise Duty (IS-OIL) - Invoice verification and accounting ED

    Hello experts,
    I have a case in my importation process with excise duty (IS-OIL). I have the following scenario: Purchasing Ed free material and receive it in ED paid Storage Location. So I use Handling type 00 and Valuation type TAX in the PO excise duty item data. I woul like to kwon Which is the standard process for the invoice verification of the excise duty cost when the handling type is 00 and the valuation type TAX?. And How can I do the invoice verification (MIRO) if there is not a specific line in the purchase order history for the excise duty cost?
    I have another case in the accounting of movement type 301 (transfer posting between 2 plants). The accounting posting is the following:
    Examle:
    Account                       Transaction
    1. STOCK FUEL          S                    BSX (Stock account)
    2. STOCK FUEL            H             BSX (Stock account)
    3. STOCK EXCISE DUTY     S             SVO (ED Account)
    4. EXCISE DUTY FUEL           H             ZZP (ED Account)     
    The problem is that the 4th account must be STOCK EXCISE DUTY ACCOUNT from SVO transaction.
    I would be grateful if someone could help me with these cases.
    Thank in advance.
    Pablo

    Dear Prashant,
    Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
    My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

  • Excise Duty is not captured in MIRO

    Dear,
    When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
    In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
    we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
    Please give us solution.
    Br,
    Swapnil

    hi,
    have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
    Regards,
    mukesh

  • Excise Duty is not gettig posted in accounting doc

    Dear Experts,
    In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

    Dear Prashant,
    Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
    My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

  • Excise duty for some line item of material document is not posted

    Dear CIN Exerts,
    In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
    In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
    Now the problem is that we wants to post excise Duty for those material WRT  material document for whom it was not posted.
    Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted)   in MIGO > Document Display> Excise items tab .
    Regards,
    Ashutosh

    Excise posting is not recommended by sap for movements 103 or 105.
    Refer or search for SAP notes with subject CIN Limited functionalities.

Maybe you are looking for