Problem in executing port reading concept.
Hi,
I tried to read a field, using the port reading concept in universal data reader. Even the graph is successful, but the data doesnt flow from the o/p. Help me to come over that.The configuration of the graph is
<?xml version="1.0" encoding="UTF-8"?>
<Graph author="123" created="Mon Oct 08 10:06:08 IST 2012" guiVersion="3.2.1" licenseCode="CloverETL Designer single license" licenseType="CloverETL Designer single license" modified="Mon Oct 08 10:06:08 IST 2012" modifiedBy="123" name="Default graph name" revision="1.0" showComponentDetails="false">
<Global>
<Dictionary/>
</Global>
<Phase number="0">
<Node enabled="enabled" fileURL="${DATAIN_DIR}/port.csv" guiHeight="80" guiName="UniversalDataReader" guiWidth="148" guiX="159" guiY="184" id="DATA_READER0" type="DATA_READER"/>
<Node dataPolicy="controlled" enabled="enabled" fileURL="port:$0.field1:discrete" guiHeight="80" guiName="UniversalDataReader" guiWidth="148" guiX="400" guiY="169" id="DATA_READER1" trim="true" type="DATA_READER"/>
<Node debugFilename="${DATAOUT_DIR}/Trash.csv" debugPrint="true" enabled="enabled" guiHeight="67" guiName="Trash" guiWidth="128" guiX="726" guiY="169" id="TRASH0" type="TRASH"/>
<Node enabled="enabled" guiHeight="67" guiName="Trash" guiWidth="128" guiX="698" guiY="290" id="TRASH1" type="TRASH"/>
<Edge debugMode="true" fromNode="DATA_READER0:0" guiBendpoints="" guiRouter="Manhattan" id="Edge0" inPort="Port 0 (input)" metadata="Metadata0" outPort="Port 0 (output)" toNode="DATA_READER1:0"/>
<Edge debugMode="true" fromNode="DATA_READER1:0" guiBendpoints="" guiRouter="Manhattan" id="Edge1" inPort="Port 0 (in)" metadata="Metadata1" outPort="Port 0 (output)" toNode="TRASH0:0"/>
<Edge debugMode="true" fromNode="DATA_READER1:1" guiBendpoints="" guiRouter="Manhattan" id="Edge2" inPort="Port 0 (in)" metadata="Metadata2" outPort="Port 1 (logs)" toNode="TRASH1:0"/>
</Phase>
</Graph>
Thanks in advance.
Dan,
I have posted the graph file and data in this reply. kindly take it for reference.
data file: porst.csv contains
Name
Laxmana
Bhaskar
saranya
suganya
graph file:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Graph author="123" created="Fri Oct 05 09:39:11 IST 2012" guiVersion="3.2.1" id="1349422261786" licenseCode="CLP1DENDEC48373255BY" licenseType="CloverETL Designer single license" modified="Thu Oct 11 15:14:38 IST 2012" modifiedBy="123" name="lastport" revision="1.18" showComponentDetails="true">
<Global>
<Metadata id="Metadata2" previewAttachmentCharset="ISO-8859-1">
<Record fieldDelimiter="|" name="error" previewAttachmentCharset="ISO-8859-1" recordDelimiter="\r\n" skipSourceRows="1" type="delimited">
<Field name="recordID" type="integer"/>
<Field name="fieldID" type="integer"/>
<Field name="data" type="string"/>
<Field name="error" type="string"/>
</Record>
</Metadata>
<Metadata id="Metadata1" previewAttachmentCharset="ISO-8859-1">
<Record fieldDelimiter="|" name="out" previewAttachmentCharset="ISO-8859-1" recordDelimiter="\r\n" skipSourceRows="0" type="delimited">
<Field name="field1" type="string"/>
</Record>
</Metadata>
<Metadata id="Metadata0" previewAttachmentCharset="ISO-8859-1">
<Record fieldDelimiter="|" name="recordName1" previewAttachmentCharset="ISO-8859-1" recordDelimiter="\r\n" skipSourceRows="1" type="delimited">
<Field name="field1" type="string"/>
</Record>
</Metadata>
<Property id="GraphParameter0" name="CONN_DIR" value="${PROJECT}/conn"/>
<Property id="GraphParameter1" name="SEQ_DIR" value="${PROJECT}/seq"/>
<Property id="GraphParameter2" name="DATAOUT_DIR" value="${PROJECT}/data-out"/>
<Property id="GraphParameter3" name="GRAPH_DIR" value="${PROJECT}/graph"/>
<Property id="GraphParameter4" name="PROJECT" value="."/>
<Property id="GraphParameter5" name="TRANS_DIR" value="${PROJECT}/trans"/>
<Property id="GraphParameter6" name="DATATMP_DIR" value="${PROJECT}/data-tmp"/>
<Property id="GraphParameter7" name="META_DIR" value="${PROJECT}/meta"/>
<Property id="GraphParameter8" name="DATAIN_DIR" value="${PROJECT}/data-in"/>
<Property id="GraphParameter9" name="LOOKUP_DIR" value="${PROJECT}/lookup"/>
<Dictionary/>
</Global>
<Phase number="0">
<Node enabled="enabled" fileURL="${DATAIN_DIR}/port.csv" guiHeight="80" guiName="UniversalDataReader" guiWidth="148" guiX="154" guiY="138" id="DATA_READER0" type="DATA_READER"/>
<Node dataPolicy="controlled" enabled="enabled" fileURL="port:$0.field1:discrete" guiHeight="80" guiName="UniversalDataReader" guiWidth="148" guiX="403" guiY="156" id="DATA_READER1" skipSourceRows="0" trim="true" type="DATA_READER"/>
<Node debugFilename="${DATAOUT_DIR}/Trash.csv" debugPrint="true" enabled="enabled" guiHeight="67" guiName="Trash" guiWidth="128" guiX="726" guiY="169" id="TRASH0" type="TRASH"/>
<Node enabled="enabled" guiHeight="67" guiName="Trash" guiWidth="128" guiX="698" guiY="290" id="TRASH1" type="TRASH"/>
<Edge debugMode="true" fromNode="DATA_READER0:0" guiBendpoints="" guiRouter="Manhattan" id="Edge0" inPort="Port 0 (input)" metadata="Metadata0" outPort="Port 0 (output)" toNode="DATA_READER1:0"/>
<Edge debugMode="true" fromNode="DATA_READER1:0" guiBendpoints="" guiRouter="Manhattan" id="Edge1" inPort="Port 0 (in)" metadata="Metadata1" outPort="Port 0 (output)" toNode="TRASH0:0"/>
<Edge debugMode="true" fromNode="DATA_READER1:1" guiBendpoints="" guiRouter="Manhattan" id="Edge2" inPort="Port 0 (in)" metadata="Metadata2" outPort="Port 1 (logs)" toNode="TRASH1:0"/>
</Phase>
</Graph>
Thanks
Similar Messages
-
If you're having problems with USB ports, read on...
i'm reading that alot of people on here are having problems with their front (or top) usb on their cases not working with their k7n2 boards. i have come across the correct solution to this problem in one of the posts (after having solved the problem on my own), however noone has posted the solution by itself on this forum so everyone can easily see it.
The trick is to make sure that pin 10 (at least on a K7n2 delta-L), the pin labeled USBOC (USB Open Connection), is wired to NOTHING. If the connector to your front usb ports is fused into one giant connector and it HAS a wire that will connect to this pin (labeled GND2 or Shield or something), CUT THAT WIRE. Pin 10 on JUSB2 (at least on a K7n2 delta-L) must be OPEN. If this pin IS connected to something (even if it is only GND), the motherboard will think something is connected to this usb port and you will get many unknown devices listed in your windows device manager and the rest of your usb ports may or may not work.
As a general rule of thumb, if a pin on a motherboard is labeled OC for "Open Connection" and you wire something to it, you're asking for trouble.
If you cannot understand this you should not be attempting to wire a motherboard in the first place.
Here is a picture to go along with this discussion. If you cannot see this picture, I am sorry for it has probably been removed from the place I posted it online as I cannot attach pictures physically to this post. If someone here has a way to permanently host this picture and post it to this thread permanently, that would be wonderful.
In summary: all usb ports/headers have only four pins associated with it (VCC, USB+, USB-, GND). If the connector (whether it's one big connector or individual sockets) to your front/top usb port has 5 sockets, don't connect the 5th socket to anything. That goes for any case/motherboard combination. This is what i'm talking about above. I have no idea why motherboard and case manufacturers have a 5th pin involved in any way on either the pin or socket side. It is not used for usb.
EDIT: I just noticed this has already been discussed in the trouble shooting guide in the above sticky post. oh well, now we have a pretty picture to go along with it (i hope).:-D)Hello guys,
as promised I come back here to give the results of my tests... and I have to say that you saved my day (even if I had to open back 60 secured cases).
So the solution was the right one, when I unplugged the "ground" end of the front USB connector cable from the USBOC pin, those connectors finally worked as expected with USB 2.0 compliant devices.
So thank you really much for this very usefull information !
And even if maybe it's not only MSI's fault, I still believe that more information on those connectors in the user's manual would be really usefull (who knows what USBOC means except a few people and who could imagine that pluggin on it a "ground" cable would make it unserviceable ??). And who ever saw a user's manual bundled with a case ?? it's pretty unusual
Hope that someone at MSI will read that and take it into consideration, not for me (because now I'm aware) but for the thousands other consumers that will feel a little bit "annoyed" with that issue. I don't think that adding one line about it in user's manuals would be so much expensive
But I'm quite lucky myself... being able to understand and write english (even if I still have some progress to do ) gave me the possibility to find the solution... but a lot of my french fellows can't do that... and there's no french forum here... How can they do ? They rely on user's manual
Best regards,
Nicolas -
Problem --serial port reading one character at a time
Hi Friend,
I reading the serial port one character at a time , i specified it in the "serial bytes to read" option in serial port read examples.
The problem is ----------i can able to read the data.
but only the first character is reading again and again...and "reading string indicator" in the serial port example shows only the first character sent ..only for a single time.since i am reading continously ----aleast the first character should display as many times i running the program
(i am running the vi by run continous option..........)..
please help me ....how to read the character one by one.....
regards
rajasekarHi jason...
I can able to read the serial port by 1 byte or 2 byte or 4 byte as i can specify it in the serial port read bytes option..(in visa serial read)..
I need to acquire 4 bytes of data and pass it to the Math-script node..and save these 4bytes of data in array (1 row and 4 column)..
And split this array(just like array-indexing.vi) and processing it each each column separately....
or suggest some method to achieve my task.....please.
one more thing the math-script node is placed in a while loop.....in order to read sequence of bytes continously.......
regards
rajasekar -
Port read access problems under WinNT
I'm using LabWindows/CVI for accessing a self made ISA-bus interface card. Each port read access fails, though the correct data is visible at the ISA-bus. Each port read (using inp()) returns 0xFE.
- operating system is WinNT 4.0
- the low-level support driver is loaded at startup
- write port access (using outp()) works
Can somebody help me in this topic?
Thanks,
MarkusHi Markus,
I collected some information on this problem. Please see if it works :
1. Try running the example program in this link and see if it works fine.
http://ae.natinst.com/devzone/explprog.nsf/41ee12ddba6c766a8625684700691463/4066173b8d98118a86256a79...
http://ae.natinst.com/devzone/explprog.nsf/41ee12ddba6c766a8625684700691463/78e7f3ac0de597fd86256aa2...
2. Please take a look at this discussions forum issue which might help you :
ref = "http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000... -
Problem of executing a process under Linux using Runtime.exec
Hi, All
I am having a problem of executing a process under Linux and looking for help.
I have a simple C program, which just opens a listening port, accept connection request and receive data. What I did is:
1. I create a script to start this C program
2. I write a simple java application using Runtime.exec to execute this script
I can see this C program is started, and it is doing what it supposed to do, opening a listening port, accepting connection request from client and receiving data from client. But if I stop the Java application, then this C program will die when any incoming data or connection request happens. There is nothing wrong with the C program and the script, because if I manually execute this script, everying works fine.
I am using jre1.4.2_07 and running under Linux fedora 3.0.
Then I tried similar thing under Windows XP with service pack2, evrything works OK, the C program doesn't die at all.Mind reading is not an exact science but I bet that you are not processing either the process stdout or the stderr stream properly. Have you read http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html ?
-
Re: [iPlanet-JATO] Experiencing problem while executing model.
Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed] -
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
Trying to open a streamed PDF in an IFRAME in Internet Explorer 9 on my Win7 64bit machine.
This results in the following dialog:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
The PDF is streamed (not read from disc) from a servlet in our Java WebSphere environment and the call looks like this:
https://intranetserver.com/myapplication/OpenDocumentServlet.pdf?documentToOpenID=1
The Servlet sets content-type header application/pdf and content-length and writes the bytes to the buffer.
Does the error dialog even come from Acrobat? When the dialog opens there is no active AcrReader process visible in task manager.
Please advise!
Meddelandet redigerades av: p b
Solved. Our IT dept. responsible for packaging and deployment repacked and redeployed 11.0.9. Unknown what changes were made to make it work.I don't know what acrofix.exe is; can you explain?
Issue
Nothing happens when you launch Acrobat 30 days after installing a CS6 suite.
Solutions
Important: Perform the solutions below in order. Do not continue further if an earlier solution resolves the problem.
Solution1: Install the patch for Acrobat installed as part of a CS6 (Windows Only)
1. Log in to your Windows computer as an Administrator.
2. Click the following link to download the patch file:
Acrofix.zip
3. When prompted "Do you want to open or save this file?,” click Open.
4. Extract the file. The location varies depending on your operating system and the utility.
5. Double-click the extracted Acrofix.exe to begin the execution.
6. If the execution is successful, Command Prompt closes automatically.
7. When the execution is complete, launch Acrobat.
or
Solution2: Install the patch for Acrobat installed as part of a CS6 using Command Prompt (Windows Only)
1. Run the Command Prompt as an Administrator.
2. Navigate to the location of the extracted hot fix in Solution 1 (Step 4).
3. Type Acrofix.exe to execute it.
4. If the execution is successful, Command Prompt shows Exit Code:0
5. When the execution is complete, launch Acrobat.
Solution 3: Reactivate Acrobat through another Suite product
I will try your cleaner, thanks
[private data removed] -
Problem While Executing T.CODE DP90
Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1. We are creating Sales Order and system will create Service order automatically as per the configuration.
2. In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PMHi Prashanth,
Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of Cost element and Blank activity type so, we are getting different material in DP90. -
Problem in executing a javascript link on a jsp page
I am having a problem in executing a javascript function from a link. For example if i click some link let say Discover and behind the scene some applet method is supposed to be called, but it is not called? However the the function name comes in the url area (address bar of internet explorer) like javascript:document.switchApplet.discover()
Can anybody help me solving this problem?
Moreover, just for a hint, i think i have deleted some registery value of such time so that's why it is not working. But i am not sure.what is d error u r getting ???
Is it java script error? yes then u can find the line no.
view the source code or ur page and find whether ur .js is including properly or not? means whether the path is correct ? -
Problem in executing EXE from browser-URGENT
Hi all,
I am facing a problem in executing "c exe" file from my web based application, iam using IAS
on Solaris. my program is able to catch the path but its not executing (this is wirking fine in windows) i am giving a sample code here
Runtime rt=Runtime.getRuntime();
Process pro=rt.exec("/datadisk1/java/runsol.exe");
pro.waitFor();
runsol.exe will generate s text file when executed, when i run this in a independent java program then it is executing, on browser it is not executing and output text file is not creating.
Note: i am working on Solaris / Oracle AS 9i
Thanks
Bye.Security issue. Calling .exe from applet not possible by default.
-
Problem when executing the same subVI in parallel.
Hey!
I have created a subVI that I am using in two applications that executes in parallel. For some reason the applications is using the same instance of the subVI, which creates conflicts when the applications are trying to use the same subVI at the same time. Is it possible to solve this problem?
/JakobOpen the SubVI and go to File>>VI Properties. Select Execution and check "Make VI reentrant". This should solve your problem. You should read more about reentant VIs and how they work in the site. They have different kind of uses.
Try to take over the world! -
Expdp problem when executing from pl/sql transportable tablespaces
Hello
i have a very strange problem for which your assistance is really appreciated. i am applying the transportable tablespaces approach and i have a problem when executing expdp from commandline in comparison to the procedure generated to make the exact same thing.
more precisely when running:
expdp etl/etl dumpfile=TBSP090609_DMP.dmp logfile=TBSP090609_DMP.log directory=EXPDP transport_tablespaces=TBSP090609 transport_full_check=y
the dmp file produced is over 200MB.
when runng the below pl/sql code the volume produced is around 50MB. any idea what i am missing?
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_LIST',
VALUE => '('''
|| tablespace_name
|| ''')'
dbms_datapump.start_job (job_handle);thanx you for your response. the problem was eventually managed to be resolved as follows:
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_EXPR',
VALUE => 'IN('''
|| tablespace_name
|| ''')');
dbms_datapump.start_job (job_handle); -
Problem while executing the transaction code FMBV (Reconstruct)
We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors. -
I just reinstalled Windows, but I still can't access my Ipod. It shows up on the toolbar as being present, but my ITunes (6.5) doesn't recognize it. Also, when I try to safely remove it, I get a message saying it can't be stopped, try again later. Would this be a problem with USB port? Shouldn't this have been fixed by reinstalling Windows with the factory settings? Any ideas would be greatly appreciated.
When did you buy your iPod? iPods purchased after
Sept. 2006 require iTunes 7. It can be downloaded
here: http://www.apple.com/itunes/download/.
I talked the store into getting a new ipod after my original one couldn't be fixed. i don't want to download itunes 7 because of all the problems i've read that it has caused. plus, the problem i'm having (not being recognized correctly) is the same problem i had with my original ipod, which i got on 1/21/05. -
Problem during executing Command Prompt
Hi All
My current code is executing system commands through java programme,like �dir�,�date� itc.Whenever I run the code the desired output comes.But when I am running the code continuselly then lots of command prompt open regularlly.
Is there any way to stop the code from execution untill unless the command prompt get closed manually?Here is my code.
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.IOException;
interface IPerlService
public String BZMCreateZone(String s);
public int BZMRenew();
public class Sample
public void BZMCreateZone()
Runtime runtime;
Process process;
String s=null;
String str=null;
try
runtime = Runtime.getRuntime();
process =runtime.exec("cmd /c start dir");
str=process.toString();
try
process.waitFor();
catch (InterruptedException e)
e.printStackTrace();
BufferedReader reader = new BufferedReader(
new InputStreamReader(process.getInputStream()));
s = reader.readLine();
catch (IOException ex)
ex.printStackTrace();
public static void main(String[] args)
Sample obj_Sample= new Sample();
obj_Sample.BZMCreateZone();
}I want to execute below commands programmatically.
devenv D:\TestApp\TestApp.sln /rebuild release
devenv D:\TestApp\TestApp.sln /rebuild debug
But I am not able to set the current directory path as "D:\TestApp\" programatically.
Through which API I can execute multiple commands on command prompt programmatically same as we do manually on cmd.
Why can you "not able to set the current directory path as "D:\TestApp\" programatically"? Are you forgetting to escape the backslashes?
Why to you need to set the current directory anyway?
What is the problem with executing multiple commands?
As to your basic goal, have you looked at
system()
ShellExecute()
ShelExecuteEx()
CreateProcess()
? Perhaps you should show us what you have tried.
David Wilkinson | Visual C++ MVP
Maybe you are looking for
-
I keep getting a timeout session notification when I try to update apps on my iPad 3.
I keep getting a pop up stating a time out session when trying to update my apps on my ipad
-
HOW TO RESET PASSWORD IN LENOVO X1 CARBON
Hi I could't get access to my lenovo x 1 carbon.I am having forefront identity manager. I have a problem in sign in ,getting an error of 40007.an authentication problem.
-
Down payments country spec. issue
This is one more country specific posting problem and it is related to down payment processing. When I receive down payment from customer I have to report it on separate GL account (DP on current assets). But difference then standard settings is that
-
My G-5 is not reading a cd. What do I do?
My G-5 does not read the cd.
-
I was looking to rip my DVD's to an external hard drive and was wondering if there was anyway for me to use Apple TV to play ripped DVD's? I want to make my entire collection on a hard drive so I can just scroll through and watch DVD's from the hd in