Problem in F4 help in sel. screen of report
Hello Experts,
I have problem regarding the list of values(f4 ) in selection screen of a report. The field displays list of as follows
status key
zpen e0001,
zope e0002 and so on
where as I want tht it should display as follows
status key
Pending e0001
open e002,
zpen and zope are the short description for the characteristic,where as I want to display long text in the valid list of values.
So i need a help on how can i control the display of list of values for a info-object
Regards
Priyanka
Hi Priyanka,
To see the text in F4 help, you have to one specific setting in Cube definition on which the query is based.
Go to the Cube definition in RSA1. In upper menu, go to Extras. There you will find one option "Structure specific properties..". You can specify "Key and Text" for the object you want to have F4 help on. Also make sure to specify long text there.
This will solve your issue.
Regards,
Yogesh
Similar Messages
-
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.
I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input. -
Error in generating a sel-screen.
friends,
am getting an error while activating a report saying that error in generating the sel. screen 1000 in line 0....also, am not able to select the selection-texts (in the goto->text elements), which says there aer serious syntax errors...pl help..thanks all..
here is my selection-screen declaration code
SELECTION-SCREEN BEGIN OF BLOCK APPLICATION WITH FRAME TITLE TEXT-002.
PARAMETERS:
PM_WERKS LIKE MSEG-WERKS OBLIGATORY DEFAULT '1000',
PM_MJAHR LIKE MKPF-MJAHR OBLIGATORY DEFAULT SY-DATLO.
SELECT-OPTIONS:
PM_MBLNR FOR MSEG-MBLNR NO-EXTENSION MEMORY ID MBN.
PARAMETERS :
PM_LGORT LIKE MSEG-LGORT OBLIGATORY DEFAULT '1001',
PM_BUDAT LIKE MKPF-BUDAT.
SELECTION-SCREEN END OF BLOCK APPLICATION.Hi Satish,
i am not facing any kind of problem with your code. can you check it once.
TABLES: mseg.
SELECTION-SCREEN BEGIN OF BLOCK application WITH FRAME TITLE text-002.
PARAMETERS:
pm_werks LIKE mseg-werks OBLIGATORY DEFAULT '1000',
pm_mjahr LIKE mkpf-mjahr OBLIGATORY DEFAULT sy-datlo.
SELECT-OPTIONS:
pm_mblnr FOR mseg-mblnr NO-EXTENSION MEMORY ID mbn.
PARAMETERS :
pm_lgort LIKE mseg-lgort OBLIGATORY DEFAULT '1001',
pm_budat LIKE mkpf-budat.
SELECTION-SCREEN END OF BLOCK application.
Regards
Vijay -
HP G56 System Recovery Problem after removing disk 4 black screen
hi everyone
this is my first time, im helping my nextdoor neighbours laptop hp g56,
the hard drive has been fried and i have intalled my old playstation 3 40 gb hard drive into it.
after the recovery system finished and told me to remove disk 4 it restarts and now have a black screen, does this mean its still installing because i turned it off and then on and now say no bootbale device.
windows 7
40 gb hard drive (ps3 40gb)pepe999 wrote:
selinacartwrigh wrote:
my system comes on and then stop before it opens the key board and say disk boot failure insert system disk how could find a disk I cant even get in
The message means that your internal hard has been damaged. This message always comes up when the file system is corrupted. I suggest to remove it, connect the hard drive into a different computer as an external drive (use usb caddy), perform a backup if possible and the format the hard drive and restore the factory settings. I'm afraid that you have to reformat the hard drive, a checkdisk scan won't help..
The error message means that the Boot Sector is corrupt or has been damaged. It does not mean that the hard disk is damaged.
This is a fixable issue. There are a few command line tools that can be used.
You will need to make an appropriate version (32-bit / 64-bit) of the Windows 7 repair disc from a working Windows 7 installation. You will need either a USB or CD to create your rapair CD/USB. Follow the instructions on this video to create the repair installation of your choice..You will will be using the manual boot sector repair that is described in this video to repair your Windows 7 Boot sector. Use the Windows 7 repair disc or repair USB thumb drive that you created earlier to accomplish the repair.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Portal crashes and intermittant problems..urgent help needed.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.system_admin_ws/com.sap.portal.themes/com.sap.portal.theme_editor/com.sap.portal.styleeditor
Component Name : null
Page could not create the iView.
I briefly describe the system setup.
sptltrex = central instance
sptl1 = app1
sptl2 = app2
sptldb = database instance.
sptltrex built with virtual name ourworld-0
sptldb built with virtual name ourworld-db
System setup with Oracle dataguard feature, so ourworld-0 and ourworld-db can fail over to disaster recovery systems sptldr and sptldevdb at another site. Although we installed using the SAPINST_USE_HOSTNAME for SCS/central instance the visual administrator and message server still pick
up sptltrex. We though setting the SAPLOCALHOSTFULL to ourworld-0.sap.serco.com had fixed this issue, but this generated many iview errors that
could not be found. When the SAPLOCALHOSTFULL was backed out everything
began to display again. Although there is still intermittant errors of screens not acting as required.
message server output
http://sptltrex:8100/msgserver/text/logon
version 1.0
J2EE1666800
J2EE sptl2.sap.serco.com 50000 LB=2
J2EES sptl2.sap.serco.com 50001 LB=2
P4 sptl2.sap.serco.com 50004 LB=2
P4S sptl2.sap.serco.com 50006 LB=2
J2EE13975600
J2EE sptltrex.sap.serco.com 50100 LB=2
J2EES sptltrex.sap.serco.com 50101 LB=2
P4 sptltrex.sap.serco.com 50104 LB=2
P4S sptltrex.sap.serco.com 50106 LB=2
P4HTTP sptltrex.sap.serco.com 50105 LB=2
JC_ourworld-0_PP1_01
SDM ourworld-0 50118
We have had numerous OSS messages for various continuing problems on the system. Today we have an complete up-to-date as possible patched system. SPS 9 with all the latest sub patches also. We have installed AIX TL 05 with service pack 2 so oslevel -s shows 5300-05-02 + a related db APAR, the IBM java JDK is SRS06. Full earlywatch go-live check parameters and options have been completed.
But still we have problems.
can anybody help......it's urgent....
thanks
saurabhhi!!
We have a 3-server portal installation with one j2ee dispatcher and two
j2ee servers on each server.
We are experiencing major issues with the consistency or
synchronisation between the servers and availability of portal applications.
For example the themes editor is only available on sptl1 server0, so if
you are lucky and log onto that server you can use this application.
THIS IS ONE OF MANY examples of this type of issue. How can we ensure
that the landscape is consistent? Screen shots from sptl1 showing the
themes application being available and not available.
A simple look at the filesystem reveals the following, and only the
themes editor directory and contents are on sptl1.
JSPM deployment finished successfully.
sptl1:root:/ > find / -name "com.sap.portal.themes.editor" -print
/usr/sap/PP1/J00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.themes.editor
/usr/sap/PP1/J00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/portalapps/com.sap.portal.themes.editor
sptl1:root:/ > ssh sptl2 find / -name "com.sap.portal.themes.editor" -
print
sptl1:root:/ > ssh sptltrex find / -
name "com.sap.portal.themes.editor" -pri>
thanks
saurabh -
Windows Help and Support screen glitch? And keyboard malfunction! Help!
I have 3 problems. At the log in screen of my hp stream notebook 11, I wasn't able to complete my password due to a malfunction in one of the keyboard keys. I shut down the computer and came back later to try again. It worked but when I logged in, the Windows Help and Support screen kept repeatedly popping up even when x'd out. I would let it repeatedly pop up (like a glitch) and I would x it out and it would go away. Also as I was typing in anything (wordpad, internet, search), every other key letters and numbers were acting as shortcuts to different screens such as apps, the log in screen, control panel etc. then the Windows Help and Support screen would pop back up again as a glitch. Please help!
Hi @aaliyah22
Welcome to the HP Support Forums!
You mention three different issues, and I am happy to assist with this. Obviously we need to start with the keyboard. As it is just the one key you describe as a problem, I would try a cleaning. You could see if some compressed air helps first as some debris may have gotten into it. Also you can look at these two pages and see if anything helps.
Notebook Keyboard Troubleshooting (Windows 8)
Cleaning your Notebook PC
The other two problems sound a lot like something like a software or possibly a malware related issue, but you can start with trying a system restore to a point before the problem began and see if that helps.Using Microsoft System Restore (Windows 8)
Then take a look at these.
Resolving and Preventing Viruses on Your Computer (Windows 8)
About Spyware, Adware, and Browser Hijacking Software
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Help and Support screen popping up unbidden
Just recently, the HP "Windows Help and Support" screen keeps popping up unbidden, so I have to keep closing it. Very annoying. What can I do about this?
Thank you for the additional information.
Here is HP Help and Support for Vista. I suggest uninstalling it and reinstalling it to see if it solves your problem. If not, you may have to do a Systems Recovery.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Hi Experts,
i am new to the SRM, i am facing problem in passing data from one screen to another.
my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
Thanks
TanveerHello,
What version of SRM are you on? Have you check for OSS Notes? I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues. The BADI works pretty well and it is called almost every time something happens to the shopping cart.
I have noticed that sometimes that values are not changed til the second calling of the BADI. I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check' button to flush things out.
I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
Regards, Dean. -
Problems when printing help topics from OHJ
We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
(1) Spacing Errors (all printers had identical results)
Text with special formatting (<b>, <i>) often has either too much space or not enough space.
Links often have extra spaces underlined before or after the link, itself.
(2) When printing multiple help topics from the TOC (an entire branch in the tree):
On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
Is this a problem with the Ice Browser?
Thanks for the help,
Wendy StudinskiThere are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
Not every font has this problem, so varying the font you are using might help the appearance when printed.
The other problem you report, problems with the images when printing multiple topics, is something that we will look into. -
Help! White screen and will not turn on again!
Can anyone please help?
My phone is suffering from the infamous white screen of death about once a day now. The only response I can then get from it is if I do a battery pull. When I return the battery the phone starts to reboot but never finishes and just turns off and is unresponsive to any buttons. The only way I have found to remedy this is by charging the phone. It then turns on as normal. I will make a point of noting that my phone is never out of battery when this happens. When I go to charge it, it starts off at whatever percentage of full it was previously on.
However, carrying around a phone charger and power source is a poor solution to this problem.
Any help would be greatly appreciated!
ClaireHey clmcguin,
Welcome to the BlackBerry Support Community Forums.
I would suggest to do a clean reload of the device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before restoring any data to the device.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
My ipod's screen is severely blurred, but sometimes it will go back to normal for a little while. I've reset and restored it many times, but it doesn't fix the problem. Please help...
I think you have to take it in to Apple.
-
HT1349 When I click on a help subject the screen that appears is frequently blank.
When I click on a help subject the screen that appears is frequently blank.
I also have this problem. The Number two shows up in the App Store screen. I go to purchases and there are no apps that require updating. The number two in the App Store still remains on my screen. Has anybody found the solution yet? I called Apple, Only to be told that I should back up to iTunes on the computer, and then restore my iPad from the computer to eliminate the number two on the App Store screen. I'm hesitating to do that. Suggestions?
-
Search help on selection screen.
I have a selection screen with
Report name
Variant name
Variant fields
Variant fields is attached to a search help 'Z_Search_variant' and this search help fetches values based on "Report name" "Variant name" on the selection screen.
I am using
AT SELECTION-SCREEN ON VALUE-REQUEST FOR Variant_field
PERFORM f4_help_variant.
FORM f4_help_variant.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = space
fieldname = space
SEARCHHELP = 'Z_SEARCH_VARIANT'
SHLPPARAM = 'REPORT'
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
VALUE = Report
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = 'X'
CALLBACK_PROGRAM = SY-REPID
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB = return_tab
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
How do I pass value to this search help? Currently I do not see this FM allowing this option? Any other options?Hi Vinita,
wat i figured out from your problem is u need how to get values from FM so u can do it in this way..
READ TABLE it_return INTO wa_return INDEX 1.
IF sy-subrc = 0.
wa_output-vkorg = wa_return-fieldval.
ENDIF.
IF wa_output-vkorg IS NOT INITIAL.
MODIFY it_output FROM wa_output INDEX row_id * it_output is final ITAB
TRANSPORTING vkorg.
ENDIF.
CALL METHOD c_alv->refresh_table_display.
CLEAR: wa_return,it_return[],wa_output.
Maybe you are looking for
-
I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?
-
Help! My Zen Micro is detected but not connected to zen media explorer & mediasou
Hi recently i just bought a creative zen micro at 5 GB. after installing all the drivers and programs using the installation CD that came with my player, I connected my player through the USB cable to my pc USB root hub. an auto-detect of my zen micr
-
Can someone tell why we define Alert categories and alert rules...
-
1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...
-
Photoshop CC crashed. Now cannot re-open. [was:Help]
I downloaded photoshop CC and everything was working for 2 hours, but then it crashed and I haven't been able to open it again since.