Problem in Newly created routinue in VOFM

Hi,
We created new routine in VOFM copying existing one.
After that we activated after saving. But i am not seeing that routinue active status in active column.
How to solve the problem
chidambaram

hi Buddi ,
u need to activate Routine also , not only the program.
come to MAIN--->after coding ur 9XX and activate it --->pick that one --->goto EDIT --->Active.
dont active all.
regards
Prabhu

Similar Messages

Problem uploading newly created page on to my Internet sit.

Using DW MX I created a new page using an existing page,
changing content then saving it under a new name.
I notice the Upload Arrow is not uploading my edited old page and newly created page.
I press on it and I get a box that states the following:
"An FTP error occurred - cannot make connection to host.
Your login or password is incorrect. Plese check your connection information."
Anyone know the problem might be?
rk

Hi
In the site definition are the details correct, and does the connection work when 'Test' is selected?
PZ

Mac to Mac file sharing - file permissions problem upon newly created files

Hi all,
At home I have two iMac's both running Snow Leopard.
iMac A/Users/*1 is sharing his iMac A/Users/*1/Documents folder.
The sharing & permissions - preferences of this folder and the files inside this folder are:
'*1' : (the iMac A's main user account) : Read & Write
'share' : (a Sharing Only account, set up from iMac A) : Read & Write
everyone : : No Access
iMac B/Users/*2 is able to read & write to this folder because he is connected with iMac A as 'share'.
So far so good. iMac A/Users/*1 can read & write to his own Documents folder
and so can iMac B/Users/*2 because he is connected to iMac A as 'share'.
But: this only applies to the folders and files that are _already in_ the iMac A/Users/*1/Documents folder,
because I once changed the sharing & permissions -permissions of iMac A/Users/*1/Documents as mentioned above and executed 'Apply to enclosed Items...'.
So the problem is: when I create a new file or folder on iMac A/Users/*1 or on
iMac B/Users/*2 and put it in iMac A/Users/*1/Documents, this new file or folder will only
have the standard sharing & permissions - preferences of any newly created file or folder
on the iMac X/Users/*Y it was created. The problem is those sharing & permissions - preferences
will not let the other iMac X"/Users/*Y" Read & Write to this new file or folder but only let himself
Read & Write. Following, the other iMac X"/Users/*Y" will only be able to Read the newly created
file or folder, because the standard standard sharing & permissions - preferences on
iMac A/Users/*1 as well as on iMac B/Users/*2 are the following:
'*Y' : (the iMac X's main user account) : Read & Write
staff : (Administrator accounts on iMac X) : Read only
everyone : : Read only
A pretty manual fix to this problem is walking to iMacX" and changing the
sharing & permissions - preferences of the newly created file or folder so that iMacX"
will also be able to Read & Write this newly created file or folder.
Does anyone know a better fix for my problem? Basicly I want to have Read & Write
sharing & permissions on the newly created file or folder for both iMac's,
not only the for the file or folder creator's iMac. And this without having to change
sharing & permissions - preferences of this newly created file or folder manually
each time.
Thanks in advance,
Vincent Verheyen.

Hi all,
I have found a thread wich i think also handles about my problem.
The standard sharing & permissions - preferences or privileges
can be changed apparently, this seems to have got something to do
with umask and changing this umask. The adress is the following:
*http://www.macosxhints.com/article.php?story=20031211073631814*
Other ways to change the above-mentioned umask may be
applications like SharePoints, TinkerTool or BatChMod.
All of them are also mentioned in the above-mentioned thread.
I haven't executed the solution as mentioned in the above-mentioned
thread yet, replies to the thread speak about insecurity and failures.
Further more I haven't found any other solutions to my problem,
so any help is still greatly appreciated.
Thanks in advance,
Vincent Verheyen.

Problem with newly created CM Repository NOT showing in Repositories Link

I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows). Here is what I have done so far...
1. Created a Windows file share
2. Configured a new CM Respository Manager (Persistence Mode FSDB)
I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
I restarted the service and still no luck...
How do I troubleshoot this??? I am not sure where to begin. Please be very detailed as this stuff is new to me.
Thanks,
Tom

I tried that and still no luck. Here is the interesting thing:
- If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
- If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
      "Startup Error: could not create directory:
172.xx.x.xx\folders\Root\Versions\versions"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The IP address is correct but where is the rest of this path coming from???
- If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
      "Startup Error: folder
172.xx.x.xx\folders\Root does not exist"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The folder does actually exist.
So confused...

Problem accessing newly created servlet in Sun IDM

Hi, I am trying to implement Jcaptcha in Anonymous enrollment user form.
I have done following steps to access the JCaptcha sample servlet...When i try to access this servlet am getting..."The requested resource () is not available"...I have a feeling that i am missing some configuration at some place....please let me knwo what i am missing here....
1.Created servlet called "SimpleCaptchaServlet" and compiled and generated jar file and placed under /WEB-INF/lib...
2. created entry in the web.xml as follows....
<servlet>
<servlet-name>simpletest</servlet-name>
<servlet-class>org.xyz.captcha.SimpleCaptchaServlet</servlet-class>
<load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>simpletest</servlet-name>
<url-pattern>/servlet/simple</url-pattern>
</servlet-mapping>
3. URL that am trying to access the same: "http://localhost:8080/idm/servlet/simple"

Hi, I am not sure of what you mean...I guess you want me to test sample servlet...even sample hello world servlet does not work...again the the steps that i followed...
1.Create a servlet and place it under ../WEB-INF/lib/sample.jar
2.Create entry in web.xml
ran as follows: "http://localhost:8080/idm/servlet/helloworld"
Note: I am using "SJS app server 9.1_01" and "IDM 8.x version"...
Thanks in advance

Newly-created Files & Folders Permission Problem

Hello. I have a Snow Leopard Server 10.6.8 with Snow Leopard and Lion clients.
When all Macs were running Snow Leopard, any client could create new folders and files on the Snow Leopard Server, and all other Mac clients can access and modify them (Read and Write permission).
I updated a few clients to Lion, and now when a Lion client created a new file or folder on the Snow Leopard Server, only that client has Read & Write permission. All other client now cannot modify the newly-created file/folder.
My temporary fix is to change the folder or file permission on the server so everyone can have access.
Does anyone know how to fix this? Is this the Lion client problem or the Snow Leopard Server problem?
Thanks.
Alex.

Hello. I have a Snow Leopard Server 10.6.8 with Snow Leopard and Lion clients.
When all Macs were running Snow Leopard, any client could create new folders and files on the Snow Leopard Server, and all other Mac clients can access and modify them (Read and Write permission).
I updated a few clients to Lion, and now when a Lion client created a new file or folder on the Snow Leopard Server, only that client has Read & Write permission. All other client now cannot modify the newly-created file/folder.
My temporary fix is to change the folder or file permission on the server so everyone can have access.
Does anyone know how to fix this? Is this the Lion client problem or the Snow Leopard Server problem?
Thanks.
Alex.

Problem in Tax Exexpiton for Newly created Wage type

Dear Gurus,
I Have tried to create a New Wage type for Allowance with Exemption IT582 created Amount. In pay roll results the IT582 Exemption amount is coming. In Wage type /132 Monthly Exemptions it says the Entire Amount which it created for the Particular wage type.
Example:
Newly created wage type 1010 : 10,000
Exemption Created : 6000
Payroll Results:
/132 : showing 10,000+800 Conveyance
MCAX : 6000 - Custom Allowance
MCMX :6000 - Custom Allowance.
By the above result the Gross value reduced to -10,000.
Please suggest me to complete this process.
Thanks in Advanc.
Anbu.

Hi Anbu,
I am lil bit confused abt the explanation u had given. anyway i will explain the configuration n step u need to perform-
configure a wage type in V_T7INA9 and V_T7INT9 view first.
maintain the amount, which employee has submitted as claim.
then pass the value in infotype 8 or 14 or 15 through the same wage type u have configure.
now minimum of 3(entry in V-T7INT9, infotype 8 or 15 or 14 and entry maintained in infotype 582) will b the exemption amount.
Regards,
Praveen
Edited by: Praveen-Sapping in SAP World on Mar 26, 2009 10:11 PM

Problem in logging in to newly created client in IDES mySAPERP ECC 6.0

Hi,
I have installed IDES mySAP ERP 2005 ECC6.0 and using client 800.I want to make a copy of the client 800.I created a new client 910 using SCC4.When I try to login to 910 using SAP* and password PASS (I tried both upper case and lower case) it does not allow. I also tried user SAP* with master password, 06071992, 19920706 and also the userid: idadmin and password: ides123 .But nothing worked. So I cannot proceed further in copying the client from 800 thro' SCCL. Can any one pls let me know what is the login ID and password that I need to use to get into the newly craeted client 910?
Thanks in advance,
V. Revathy

HI dear,
before logging into newly created cllient 910 you have to change the activate the kernal user SAP*
a) Set the profile parameter login/no_automatic_user_sapstar to 0.
b) Restart the application server.
c) Log on to the new client with kernel user SAP* and password PASS.
now do client copy. after finishing client copy again deactivate the kernel user SAP*
a) Reset login/no_automatic_user_sapstar to 1.
b) Restart the application server.
regards
abuzar

How to Apply a Newly Created Access Policy on Existing Users in OIM????????

How to Apply a Newly Created Access Policy on Existing Users in OIM?
When the rule is getting failed the user is getting removed from the group but resource is not getting revoked. This is happening only for the old uses..for the users which i created now it working fine..i mean its resource is getting revoked.
(Retrofit access policy" is checked on the Access Policyand Revoke if not longer applied is checked.)
For the old users i see the POl_Key is null, for new users i see a value '10'. So i updated the pol_key for old users same as it got generated for new users '10'.
i even updated the form version too but still revoke doesn't work.
I cant go for the below approach..
In order to apply a newly created Access Policy on existing users, one has to make sure that:
1) "Retrofit access policy" is checked on the Access Policy.
2) Then run the "Set User Provisioned Date" Schedule task to apply the Access Policy on the existing users in OIM.
Note: After 9.1.0.1 BP03 the access policy execution has been moved to a new scheduled task "Evaluate User Policies" as mentioned inDocument 839368.1 :How to Use Access Policies to Provision with Groups.
Is there any other approach i can try.. if you have any idea please reply me asap
Thanks..

Thanks for the reply kevin..
We decided to try the Schedule task (Set User Provisioned Date).
But i see one problem here after seeing this post in metalik --> Can Access Policies Manage The Life-cycle Of Users Created via Reconciliation? [ID 1136540.1]
According to this post Access Policies framework does not manage users who are obtained either through trusted reconciliation or target reconciliation.
Is there any custom way to achieve this??
How does the access policy framework revoke resource work? (revoke if no longer applies)??
Edited by: IDMuser19 on Jun 21, 2011 11:43 PM

Ps CS6 Action problem: New document created with "Preset: Clipboard" is misnamed

Ps CS6 v13.0.1
OS X 10.6.8
In an Action, File > New with "Preset: Clipboard" ignores the specified document name and uses one of the following names when the clipboard definitely does hold valid content:
1. The name that was applied by the previous invocation of File > New in a session.
2. No name if Action is run before File > New has been used in current session.
Only when the clipboard has no valid content will the newly created document be given the specified name.

The Color Profile seems to work differently between CS5 and CS6. In CS5 when I use menu File>New and there is something in the clipboard I see Preset clipboard as the dedault setting and see my current Photoshop color setting profile set in as the color profile. I pasted a ProPhoto selection into the clipboard. When I do the same in CS6 and use File>New I see Preset Clipboard as the default setting but the color profile is not my Photoshop Color setting its ProPhotoRGB the same as I pasted into the clipboard. However if I close CS6 down. Then start CS6 and do menu File>New I see Preset Clipboard as the default setting and the corol profile is my Photoshop color setting profile sRGB not ProPhotoRGB that in the clibpoard. So I feel the copy to clipboard from Photoshop triggers something internally to change the profile in CS6 it not something that gets set in the clipboard for the ProPhotoRGB override does not happen if I shut Photoshop down and restart it.
I think I like the CS6 change. Noel I wrote that for you I want you to know I don't think CS6 is all bad. This change should help one from getting profiles mismatches. CS6 is still the buggest Phoshop around. It does not stop working as smuch as it did befor the 13.0.1 update. And when it does there a chance Autosave may save the day. The last Photoshop stop working message I got from windows was when I tried to run a script. There were no open document so nothing to recover. After terminating CS6 and restarting it the script work without a problem.

Not inserting records in a newly created table

Hi everybody,
I have imported four tables in a source module and used the Join Operator in order to insert the rows in one newly created table.
This table - designed in a target module - was created in the desired schema , but without the relevant rows , as I expected...
NOTE : the where clause , i have defined in the Join Operator, is not the problem , as I removed it and the rows are not inserted...in the table
Also , the sample PL/SQL code which was created automatically , was exactly as I expected - I mean the 'insert into ... select.....' clause was right...
What may be the problem..?
Thanks , a lot
Simon

Hi Jaap,
thanks for your reply...
Sorry for being a little unclear ...
I have followed the instrunctions in the on-line help of OWB , and :
1) have imported four code tables into a source module . The tables are in an Oracle RDBMS 10g .
2)I have created manually a table - using the OWB client tool - which consisted of some of the columns found in the four tables .
3)I have inserted a Join Operator in order to correlate the four table columns with the columns of the target module.
4)I have defined the Join condition of the the four table columns. In my first post , unintenionally I have written that I removed the Join Operator. I meant the Join Condition in order to make sure that the join condition isn't the reason that the records are not inserted....
5)I have validated and generated the mapping without any errors - not even warnings.
6)I have selected Project->Deployment Manager and I selected the OWB_RUN user - which is the Runtime Repository owner.
7)I have selected the objects to deploy - the mapping , the one table I created in the target module. The deployment has succedded , and the table was created but no records are found in it.
Now , is there a possibility that this problem is caused by absence of the privileges to insert the rows...?
How can I check that the source tables are filled on the registered location of your source module?
Another basic question...
I have created a Runtime Repository owner - called owb_run- using the Runtime Repository Assistant . I use this user in order to deploy the mapping and the new table. I want -and it is created- that table in another schema (user his_dw) - even another database in the same server. Should I run the Runtime Repository owner in this schema (his_dw)???
Thanks , again a lot
Simon

How to read status of a newly created notification

Hello All,
I have implemented a BTE for the event PM000010 - Update Notification.
Now my problem is that I wish to read the existing statuses on the notification.
This works fine if the notification already existed before.
However, if the notification is newly created, then Function Modules STATUS_CHECK and STATUS_READ do not work.
This is only if the notification is newly created.
I am particularly interested to know if the status Notification In Process and Notification Completed are present on the order.
How do I achieve this since STATUS_CHECK and STATUS_READ are not able to fetch the statuses when the notification is newly created?
Thanks,
Mithun

hi
check out the below details
Where to get the table which is having user status with Notiifcation number. (not the system status).
By : Selva
1. From table QMEL get OBJNR(object number) using the QMNUM( notification number).
2. Using this OBJNR get STSMA( Status Profile) from table JSTO.
3. Using the OBJNR get STAT(object status) from table JEST.
You may/ may not get multiple object status for an Object number.
System status number will start from E.
User status number will start from I.
4. To get the text of the status, use the status number (STAT) and STSMA to get the status text from table TJ30T.
We have done this and working fine.

How to cause a form to reload with a newly created record?

I hope this is easy and I'm just missing it.
I have a form based on a table (a "parent" table.). The parent table uses a trigger to generate the PK.
When a new parent record is created with the form, I want the page to reload with the newly created record still in the form. Then some conditional regions based upon child-tables would appear, with options to populate the detail records.
My problem is simple: how can I access the value of the primary key of the newly created record once it is submitted to the database, so I can use it to reload that record into the form?
Thanks very much for your help!

John - The DML process (Automatic Row Processing) has a Return Key Into Item option. That's what you need.
Scott

JSC doesn't show newly created extended DataProviders

Hi,
I've been using JSC and Hibernate for a project.
According to Sun's how to using Hibernate + JSC (developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/hibernate.html) , I've created a wrapper class which extends ObjectListDataProvider, but instead of creating the property on the SessionBean, I did it on the PageBean.
The problem is that everytime I need to add another property to a page bean using one of my wrapper classes (extending ObjectListDataProvider), after following the how to instructions (compile the project, close and reopen), it doesn't appear as a property in the Outline panel.
After a while building, cleaning, etc. I managed to get it done in one page, but on newly created pages, the property doesn't appear on the panel.
Any ideas?
P.S.: If I instantiate a ObjectListDataProvider property, it's shown correctly.
Regards,
Leonardo Eloy

IMAP issue... fixed now.

Newly created photoshop images/icons missing in finder in Snow Leopard

Ever since installing Snow Leopard, whenever I create a new image in Photoshop and save it to a file, and then I go into that file to look for it, it is missing. The only way I can find the file is if I enter the name of the image in the finder window and do a search - then it says that the image is in the image folder - where I put it - but when I go there, it isn't there. So the only way to find and then open that newly created image, is to remember what I called it, and then enter it's name in the finder serach window. Crazy, Huh? What could be causing that, and how can I fix that?
The other problem that I notice with Snow Leopard is that the newly created icon images in finder are all blurry. The blurriness seems to be random. Some are, some are not. I did a search for that in the forum and it seems that just about everyone is experiencing this problem. You would think after a year of complaints that Apple would do something about this, but they have not. They are completly ignoring the problem.

What version of CS? what Mac even is this?
CS4 or later (CS5.x probably to be current).
http://help.adobe.com/en_US/Photoshop/11.0/WS9EF019E3-76FE-416a-853A-0F338265DB0 4a.html
http://help.adobe.com/en_US/photoshop/cs/using/WS9EF019E3-76FE-416a-853A-0F33826 5DB04a.html
http://www.bing.com/search?q=Adobe+photoshop+file+save+location

Problem in Newly created routinue in VOFM

Similar Messages

Maybe you are looking for