Problem in populating data to Logical System field

Hi All,
I am extracting GR data through Generic extraction. I am created a view using four tables MSEG, EKBE, EKKO and T001. I have a field LOGSY (Logical System). This field is in EKKO table. My problem is LOGSY field have no any data. I have to write a routine to populate data to this field. Can anybody plz tell me the code?
Edited by: Kasi Viswanath Aurangabad on Jun 18, 2008 7:50 AM

Hello,
the code is:
SELECT SINGLE logsys
FROM T000
INTO your_variable
WHERE mandt = sy-mandt.
Assign points if useful,
Best Regards,
Maciej

Similar Messages

  • Need help in Populating data in to new fields using BDT

    Hi all,
    in BDT,
    i have created  a VIEW and attached it to a subscreen,
    i am able to see the the fields and have problem in populating data into the fields,
    In the BEFORE OUTPUT FM, i am populating data into the screens, but its not available in the screen,
    Please help me in this.
    Thanks and regards,
    Sumanth.

    Hi,
    Use managedBean scope as pageFlowScope and try
    See
    http://tanveeroracle.blogspot.com/2011/02/pageflowscope-variables.html

  • To access the data from logical system to sap system

    Hi SDN SAPERS,
    I am getting a problem.
    So I need ur instant help.
    There is a  standart report named Rptcc106 having select-options logical system.
    And there is a check box and we have to click it named general idoc.
    But the issue is when I execute it should be retrive the data from logical system.
    The data are not in the logical system.
    It is a time management system blongs to sap hr.
    What are the time input and time output  a employee put in a punching machine the times should be update in sap hr.
    sapcdt45 is the standard report to time events.
    Regards
    Debasish
    [email protected]

    Yes, you can use regular TCP/IP or UDP communication for LAN communications. There is however no built-in support for much else then WebRequests, so if you want to use any other protocol you will either have to implement it yourself on top of TCP/IP or
    look for community projects that add said support (I'm currently not aware of any but it's worth looking around).

  • Logical System field in BD10/BD14 need as a Mandatory Field

    Hi All,
    Good Day,
    We have Logical System field in BD10 or BD14 etc.. TCodes and I would like to make this field as a Mandatory field. The reason for this is, while sending the Materials using BD10, and If I haven't enter any value for this field, IDOCs are getting generated and sending to all the logical systems say Dev, Quality and Production too. I want to avoid this.
    So Is there anyway where we can make the filed "Logical System" as a mandatory field.
    Thanks in Advance.
    Param.

    HI Param,
    try  BAPI_IDOC_INPUT1and check it in WE57 tcode.
    hope this helps
    regards
    Aakash Banga

  • Problem while populating data from database dynamically.

    I am having two combo box
    First one displays list of table Names
    Second one displays list of the corresponding field Names.
    Now when the user selects the table name the corresponding field names appear in the second combo box & now when the user selects the field name then the requirement is to get the data of the corressponding field of the table on the screen on the button click.
    I want to do this thing dynamically through coding.
    My requirement is only the data of those columns that have been queried should appear on the screen whereas other column data should not appear.
    Can any body help me out.

    I'm not sure if you want to populate the combobox dynamically based on any selected data source.
    If so it is kind of tricky, but do-able. You need to write little bit of coding yourself.
    First you need to get the Database metadata. For details see
    http://java.sun.com/j2se/1.4.2/docs/api/java/sql/DatabaseMetaData.html
    where you can get the table names.
    Then using the result set metadata of the selected table you can get the column information. For details see
    http://java.sun.com/j2se/1.4.2/docs/api/java/sql/ResultSetMetaData.html
    If you want to display the data of selected table and column value (statically filled combo box), then it is easy.
    you can create your own SQL statement based on the selected tabe and column and set it to the rowset dynamically in the code (may be in the method beforerenderresponse).
    - Winston

  • Problem with Populating data while cascading dynamic parameters

    <p>Hi</p><p>I have a Crystal Report 11 connecting to Oracle stored Procedure. The report has 6 input parameter fields which come from the procedure.So when the report is opened i see 6 static parameter fields.</p><p>Now Parameter 3 has to populated depending on selection of Parameter 2 and Parameter 2 should populate depending on selection of Parameter 1.</p><p>So I changed these parameters to dynamic and followed all the instructions mentioned in CR11_UserGuide.pdf from internet.</p><p>But no values are populated in my Parameter 1.</p><p>If i use a View with the report, then it works.</p><p>Please help.</p>

    Thanks Rahul,
    Â I could fix the issue by using Command Objects

  • Problem in extracting data from source system

    HI
       I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

    Vara Prasad,
    I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
    Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • Logical System not appearing in SLD

    Hello Friends,
    Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
    I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
    The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
    [The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
    Request your kind adivse on what can be done. Where can I lookout for possible errors.
    Thanks & Regards,
    Anand Patil

    Hi
    On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
    If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
    Check the Same SLD Roles with some PI Service  User.
    Regards
    Prabhat Sharma.

  • Logical System name in BBP_DET_TAX_CODE

    I am having a problem updating the logical system name in the configuration for BBP_DET_TAX_CODE. The menu path is SRM Server -> Cross-Application Basic Settings -> Tax Calculation -> Determine Tax Code for Country/Product Category. When I try to add new entries to the table, the logical system name field is grayed out so that I cannot enter any value.
    The entries in the table have the logical system name. Example:
    I Domestic     US     CAP035     DRACLNT220     I0
    I Domestic     US     CAP036     DRACLNT220     I0
    I tried using the Edit -> Change Field Contents -> Source system name, but this didn't change any values. We are running SRM Server 5.5 with support pack level 14 in classic mode. Any help would be appreciated.
    Thanks,
    Scott Andrew

    Hi
    Yes, logical system field is greyed out. Once you enter the product category (category ID), it will automatically pick the relevant backend logical system.
    R/Reddy.

  • Conversion of logical system name fails

    Hi,
    when trying to transport a transformation on BW7 the logical conversion name is failing. When i check the setup (on rsa1 menu "Conversion of logical system names") it seams to be ok on source and target system.
    Any tips to solve this ?
    thx in advance

    Hi,
    when you are not maiantained the logical systems properly , then you will get that error when you are transporting the objects
    in Bi production system ( to which server you are moving objects) in that  you should maiantain the all logical systems as below
    1) for examaple BI deve --- BI prd
    one logical systm should be bi Dev to BI prd
    2) ECC production connected to BOI production
    Then one more logical assignment  ECC prd to BI prd
    normally those two you are maintained i think so.
    but when you are moving the objects from the BI development to Bi production
    the daat sources are pertaining to the ECC developmet
    so that ECC deve to BI Dev ( here there is no problem)
    when those daat source s you are moving to production it shows error
    because that ECC deve Data source logical system should be changed to BI production
    so you main tain one more logical system ECC dev to ECC PRD
    in your BI system
    Then try reimport the same.
    Thansk & Regarsd,
    sathish

  • Jco connections Logical System

    Hi All
    i have a problem with Jco destinations--the logical systems.
    -->For META DATA i have used one userid and for MODELDATA i have used another user id.
    -->When accessing the RFC from SAP Webdynpro am using another userid to get connect to R/3 system( at Single Server tab while getting the RFC/ Creating the model class).
    -->When i deployed this application i am facing with following  error:
    Could not create JCOClientConnection for logical System: PWC_OTR_RFC_MODEL_DATA - Model: class pwc.ca.otr.model.OpenTaskReportModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
    Please give me the best / path to the solution atleast.
    regards
    Prasad

    Hi Varaprasad,
    Did you check your JCOs? Whether you are able to test and ping the JCO destination? Ask your basis team to check JCO settings.
    Regards,
    Gopal

  • CRM logical system when uploading material from R/3

    Hi experts,
    CRM is connected to R/3 4.6b which its products are created in CRM by uploading.
    We will connect to the same CRM to ECC 6.0 and then upload all new materials to CRM.
    1. What is the correct information that should appear in CRM material master data (table comm_product) in the Logical system field (comm_product-logsys) ? The CRM logical system or R/3 logical system ?
    2. In the future when I connect CRM to ECC 6.0, what will appear the source system (ECC 6.0) or CRM logical system ?
    Regards
    ahm

    Hi,
    I got confused reading your post.
    Case 1: Are you saying that the products are created in CRM and then uploaded to ECC? 
    Case 2: And again you will connect CRM to ECC 6.0 and download all new materials to CRM?
    1. What is the correct information that should appear in CRM material master data (table comm_product) in the Logical system field (comm_product-logsys) ? The CRM logical system or R/3 logical system ?
    ANSWER: R/3 logical system
    2. In the future when I connect CRM to ECC 6.0, what will appear the source system (ECC 6.0) or CRM logical system ?
    ANSWER: If this is in Case 2 scenario then the source system would be ECC6.0 as we are creating materials in ECC6.0
    PLease let me know if you have nay further Q?
    Thanks,
    Karuna.

  • How to get the current logical system?

    Dear Abapers:
    I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!

    Hi,
    Check with the table T000, the Logical system field name is LOGSYS.
    Regards
    Thiru

  • ATP Check Issue - No business system could be determined for logical system

    Dear all
    Got an issue while executing ATP check on a planned order in product view,
    with a message: "No business system could be determined for logical system"
    CIF setting wise:
    regular business system group maintained and assigned in place,
    master data wise:
    business system group info fine in product master,
    Is there anywhere suggested to check under ATP setting:
    category, check mode, business event, check control/check instruction?
    Your kindest enlighting is appreciated,
    Thank you,
    mandy

    Dear Mandy,
    usually this error is caused by a missing customizing entry:       
    spro:                                        
    Integration with SAP Components
       Integration via APO Core Interface (CIF)
         Basic Settings for Creating the System Landscape                             
           - Maintain Business System Group
           - Assign Logical System and Queue Type :
    Please read the documentation for these two transactions and create the systems.
    You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO  says:                                                                               
    To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3  system to which you want to transfer data as logical systems.          
    I hope this helps.
    Regards,
    Tibor

Maybe you are looking for