Problem in sleep and hiberbate as system restarts if sleep or hiberbate

Dear Sir/Madam,
Please find solution for the problem  of video card driver. My system works well when automatic update from windows 8.0 to windows 8.1 is done the system stops going to sleep or hibernation.
There is problem with catalyst control center (error is settings not found)
After updating Bios and All drivers the problem is not resolved.
Best regards,

Hi @Puneet1 ,
Welcome to the HP Forums!
It is a great  place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after updating your Windows 8 to 8.1 you are experiencing an issue with sleep/hibernation and the Catalyst Control Center.
For the Catalyst Control Center I suggest you download the updated driver and save it.
Uninstall the current drive and delete it
restart your notebook and install the updated driver from where you saved it.
Here is a link to HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8).
If the sleep/hibernation issue remains you can try this step.
Go to the command prompt and run as administrator
Type powercfg -restoredefaultschemes and press enter.
If your issues still remain, I suggest you try installing the original drivers from the recovery manager.
HP PCs - Using Recovery Manager to Restore Software and Drivers (Windows 8)
Next I would do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 8)
There will be an option to backup your personal files to prevent data loss.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You may choose to contact HP support for assistance at any time.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Windows 8 system doesn't get internet, says system event log on service has some problem of STOP 0xC000021A error which system restarts very slowly

    Hi, my system runs on windows 8 on hp laptop envy series. All of a sudden, system event log on service stopped, errors which prevented the system to log on services. It displayed error of STOP 0xC000021A when i use system restore to roll back to previous
    configuration. Also when I tried to refresh my pc, it says i can't do changes as log in was switched to prevent the changes by notification.I don't know what to do next, I tried to put recovery dvds which I made when system was bought, now not at all working.
    Internet is not active, not able to resolve by trouble shooting and system taking lot of time to get dsktop. Previously I used to get my desktop in 10 seconds. Now its 10 min. May be I m infected with virus. My files, they are there. I tried to transfer some
    files by pendrive to another system, now the new system(where i put my files in another system) crashed, windows 7 system which does not display desktop, icons etc and not at all workable. 
    Also in my hp system, i m unable to open control panel. if its opened, it will not go off, when i use task manager, it says explorer and shuts down. I had to force restart the system. Please resolve something to get my hp laptop workable. I m waiting for
    my MS thesis to be working on that. My files are locked and no way to transfer, I fear of infected by virus to another computer also. 
    Pls give instructions to hw to set my hp laptop at the earliest without losing any of the files. Idon't want to reinstall and lose all the data for timebeing. Else, inform me the option for copying data safely. I tried to change the adv startup and recovery
    by changing the boot sequence by DVD but this also shows error 0xC000021A and asks us to see the details. I didn't understand all this. Pls help asap.
    Thanks
    venkata
    STOP 0xC000021A

    MV
    If you can boot either from the win 8 dvd or in safe mode we need the DMP files
    We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.  
    WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
    Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
    If you have any questions about the procedure please ask
    Wanikiya and Dyami--Team Zigzag

  • Problem with GlassFish and Sun Java System Message Queue

    Hi,
    I used application server PE.8 and I upgraded to Sun Java System Application Server Platform Edition 9.0 Update 1 Patch 1, and I changed all my CLASSPATH and everything. My system is working fine, but the Sun Java System Message Queue that I used before is still showing the queues and physical queues of the previous application server, not the new one. Do you know if there is way to change that and link it to the new version?
    thanks

    Use an ESB like ServiceMix to bridge JMS providers
    http://servicemix.org/
    Or write your own MessageListener to consume from one JMS and publish on another one. Be careful with queues to avoid loosing the ordering - so you probably want to use a single MessageListener per subscription/queue - or to take advantage of Tibco's exclusive queues to ensure ordering is preserved. If ordering doesn't matter then don't worry too much about it and maybe have a pool of consumers to improve throughput
    James
    http://logicblaze.com/

  • Provisioning problem for AD and SAP ABAP Systems

    Hi,
    We're using IDM 7.20 SP3 and successfully run he Initial Load for AD, NW 7.30 and ERP 6.0 Systems successfully.
    But, when I add the priviledge of systems to a new user created via IDM UI, It is not provisioned successfully.
    Job Log show the following errors:
    [http://imageshack.us/photo/my-images/69/idmerror1.png/|http://imageshack.us/photo/my-images/69/idmerror1.png/]
    The detail log is as follow:
    JOB: Update context info
    Provisioned entries - Successes: 1 Failures:0
    MSKey AuditID Status Info
    9910 682 OK AALASARLI1
    JOB: SYNC
    Provisioned entries - Successes: 1 Failures:0
    MSKey AuditID Status Info
    9910 682 OK 1608
    JOB: Set task to error state
    Provisioned entries - Successes: 0 Failures:1
    MSKey AuditID Status Info
    9910 682 FAIL uSkip Called to skip entry
    JOB: Skip pending operation
    Provisioned entries - Successes: 1 Failures:0
    MSKey AuditID Status Info
    9910 683 OK not-existing-mskey
    JOB: Trigger notification: assignment failure
    Messages Warning Executing sap_core_getSkippedOK() got RuntimeException - org.mozilla.javascript.EvaluatorException: uSelect(select top 1 avalue from idmv_value_basic_active where attrname='MX_ATTRIBUTE_VALUE' and mskey=not-existing-mskey) got exception com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'not'. HINT: Check line 20 in the script sap_core_getSkippedOK
    Provisioned entries - Successes: 0 Failures:1
    MSKey AuditID Status Info
    9910 683 FAIL Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio
    any idea?

    Hi,
    The entries created when I updated a user (person) and add a priviledge, following entries created in audit table
    Task_name     Provision_status     mcmv_mskey     Message     mcmv_ProvStatus     mcmv_taskid     mcmv_privatetask     IDStore
    Modify Identity     OK     1608     NULL     1100     2578     0     2
    Provisioning     Failed     9911     uSkip Called to skip entry     1101     601     0     2
    Pending Operation Failed     Failed     9911     Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio     1101     898     0     2

  • Why this 6509 module reset caused system restart?

    I had a 6509 switch recycled power to its 6748-GE-TX module. I like to understand why this module reset caused the system to restart, and what this "system restart" means. Please see the syslog messages (I didn't include all messages).
    Thanks
    Gary
    Mar 16 09:52:49.452 EST: %OIR-SP-3-PWRCYCLE: Card in module 9, is being power-cycled off (Module experiencing Port asic error)
    Mar 16 09:52:49.720 EST: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (Module experiencing Port asic error) 00:00:04: %SYS-CFC9-5-RESTART: System restarted --
    Mar 16 09:53:57.497 EST: %OIR-SP-6-INSCARD: Card inserted in slot 9, interfaces are now online

    Hi Gary,
    The message is a bit misleading. The "system restarted" message is coming from the CFC daughter card on the module
    "%SYS-CFC9-5-RESTART: System restarted -"
    So the entire switch did not restart, but just the module and daughter card. Now, I'm saying that based on the provided messages. You should check the system uptime in the "show ver" and/or the reset logs stored in the NVRAM log "show log" as well.
    But, as I said, if the only indication of "System restarted" was in the above syslog, then that's only referring to the CFC.
    HTH,
    Bobby

  • APC UPS, Mountain Lion, and system restart problem

    I have a Mac Pro (3,1) and it's been running Lion (10.7.x) for a long time. It's connected to an APC UPS XS 1500 via a USB cable for years. I've never had any problems with it.
    Two weeks ago I updated to Mountain Lion (10.8.2). Since then I've returned to my machine to find that it had rebooted itself. After logging in, the system tells me that there was a problem and asks if I want to send the error report to Apple.
    Yesterday, I tried unplugging the Mac Pro from the UPS, plugging it directly into a wall outlet, and disconnecting the USB-UPS cable. So far, I've had no problem with system restarts.
    Has anyone had a similar problem? If so, did you solve it? How?
    Thank you.

    Hi, macjack. Thanks for your response.
    So far, with the MP plugged directly into a wall outlet I've had no system initiated reboots or shut-downs.
    I looked in the console log and there's so much stuff in there, I'm simply lost. Are there one or two keywords I should search for that might help in debugging the problem?
    Again, thanks.

  • Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
    iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Problems with SpeedStep and Windows Power Management: SYSTEM FREEZES!

    I am running an E6600 on my MSI 975X PUE-Mainboard @ 2,4 GHz.  I am experiencing a strange problem that seems to be related to EIST and/or Windows Power Management:
    As soon as I set Windows Power Management to "Presentation" or any other mode that lets Windows throttle the CPU frequency the system freezes randomly: no bluescreens, no error messages...the only option is to hit the restart button...
    However, if the Windows Power Management Option is set to "Desktop" the system runs just fine!
    Has anyone else experienced similar problems? 
    Any suggestions?

    @Vaniireg
    Thanks for your reply, but I cannot agree.  Windows Power Management is needed in order to use Speedstep:
    http://www.intel.com/cd/channel/reseller/asmo-na/eng/203838.htm
    Intel clearly states that:
    "An OS that supports Enhanced Intel SpeedStep technology is required. Current supporting OSs include:, Microsoft Windows* XP SP2 includes native support for Enhanced Intel SpeedStep® technology."
    and further:
    "Finally Enhanced Intel SpeedStep technology must be turned on in the OS. Currently, for Windows* XP SP2 operating systems Enhanced Intel SpeedStep technology by default is off. To turn it on do the following: Under Control Panel – open Power Options Under the Power Schemes pull down menu To turn Enhanced Intel SpeedStep technology ON select, “Minimal Power Management,” power scheme.  To turn Enhanced Intel SpeedStep technology OFF select, “Always On,” power scheme."
    If I select the "Minimal Power Management" power scheme, the CPU frequency will drop to about 1,6 GHz and the Voltage (CPU-Z) to 1,136-1,144 V.  Whenever I do that the system will eventuelly freeze.  Skipping through a video file in Media Player Classic is sometimes enough to cause the system to hang. 
    If I select the "Always On" power scheme the system will run stable, no freezes will occur, but the CPU will ALWAYS run @2,4 GHz and the voltage WILL NOT be reduced to 1.14 V. 
    @batcook09:
    Unfortunately, a clean re-install of Windows XP Pro did not take care of my problem.  I've already tried that.  The system is not overclocked and is running with default settings.  Speedstep is enabled. 
    It is interesting to notice, that Dual Core Center always causes my system to freeze, even though Windows Power Management Options are set to "Always On".  I read a lot of bad things about this program and that is one more reason for me to avoid using it.
    Well, I have forwarded my problem to Intel and MSI Support, maybe they will come up with any solution.
    Until then, further suggestions are very welcome...

  • Satellite A60-102 - Blue screen error appears on screen and system restart

    Sometime Blue screen error showing on screen and system restart
    how can solve this problem

    Hi
    What BSOD code you get exactly?
    Which OS you are using?
    Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
    Can you boot in safe mode?

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • My macbook pro 15 inch freezes up. I forced a shutdown. After reboot, system restarted to factory settings, applications/softwares disappeared, apple dropdown menu disabled, dock and icons missing, keyboard not functioning

    Hi. I'm in need of great help as I do not understand how this could have happened.
    I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
    After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
    After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
    Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
    Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
    Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
    So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
    I know my explanation is long, but do help me if you can. I'm really at a lost right now...

    Hi
    Thanks for the help. I did what you advised, but it still did not work.
    The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
    Even tried powering off and on the macbook pro again but the same problems remained...
    I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
    Nothing works.
    Do you have other ideas? Or suggestions?
    Thanks so far!

  • Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

    photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
    can someone help me with this issue?

    Two suggestions:  the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements.  Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1.  I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

  • I am having problems shutting down my MacBook Pro.  I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

    I am having problems shutting down my MacBook Pro.  I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

    Make sure you quit all your applications before shutting down.
    And try resetting the SMC.
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • When I put my macair to sleep overnight and want to put it back on in the morning, it says that it had a problem shutting down and all my work is lost. Is that normal?

    In the evening when I put my mac air to sleep and turn it on in the morning it says it had a problem shutting down and had to restart again, so all my work is gone, and this is happening quite often now and I bought it in January. So shouldn't I use the sleep mode over night is that too long and causes it to crash? Or should I take it to a apple store for them to check it out?

    Overnight isn't too long for sleep mode. I do it all of the time with no problem. However, I save everything first so I would not have the "all my work is gone" issue even if there was a problem. I would have it checked out.

  • MSI P67A-G43 (MS-7673) System Freezes and then will NOT Restart

    Hello Everyone,
    I was hoping someone out there might know what is going on with my system. My issue began about a week ago when my computer simply froze while in use. After realizing the system was not responding I hit the reset button and tried to restart, however the computer restarted to a black screen (NO words) and went no further. I turned off the power supply to force a shut down, turned it back on and then tried to restart again, only this time the computer went into a cycle where the lights flash, the fans run for 2-3 seconds, but the “all clear” beeps never sound and then everything turns off. The only way to stop the cycle is to cut the power. Because this cycle happened when I first built the computer (as a result of an improperly connected cable) I thought something inside the case might be lose, so I opened it up, removed everything  and then put it back together.
    This time when I started the system I got a screen that said “Previous overclocking has failed…” Now I have never tried to overclock my computer, nor do I know how, so I do not understand WHY my computer would give such a message. After this message however, the computer did actually restart and take me to windows, however the computer inevitably freezes again after use, sometimes after only a few seconds, sometimes after a few hours.
    Furthermore, once I shut down the computer and try to restart it, it almost always goes into the cycle of trying to restart, but failing. When it does get past the ‘all clear’ beeps I get the failed overclocking message again. I did just discover a “super-charger.exe” MSI application that was trying to run every time I started the computer and I uninstalled the application, I’m not sure if that had something to do with the overclocking or not. I also took out 3 of the 4 memory sticks and I am running on just 1. For the moment (while I write this post) the computer is working but could very well freeze again at any time, though just now it did start up withOUT the overclocking message and went right to windows.
    Thanks for taking the time to read through my problem. This issue has been going on for more then a week, ANY help would be VERY much appreciated!

    If it is fine with one stick RAM, add the second so that both blue slots are used. If ok, then remove the second stick & replace it with one of the other sticks. If ok, try the last stick. If any of the tests fail with any of the sticks in the second slot, you found the bad one.

  • Pt880 neo system restart problems during gameplay

    hello, im currently running the following setup on my computer. please forgive me if i leave anything out...
    p4-3.4 prescott CPU
    2x 512ddr400 ram (brand unknown) im upgrading to crucial 512 as these are loaner sticks from a friend.
    Western Digital 160gb HDD
    Radeon 9800 pro graphics card
    Dynex ATX midtowercase
    MSI pt880 neo mainboard
    sony cdrw  crx230a
    my powersupply is
    voltage 115-230~
    current 10a/5a
    DC output is +5v/+22V/+3.3v
    frequency is 60hz/50hz
    and max output is 500watts
    I use a thermaltake spark7+ cpu cooler
    as well as 4 case fans, a cpu cooling duct and a lower exhuast fan.
    my problem is this. while loading anygame or running a degfrag my system restarts. completely reboots. I have all the latest bios drivers ver.1.70 i belive. It appears to be a heat or power isssue. but i cannot be sure. my cpu temperature is usally around 56-60c. it seems very annoying because my friend has the same board and near same setup  allthough he is only running a 3.0. does the 3.4 prescott require an insane amount of cooling to run ? or is it a power issue? please help!  

    what are the temp readings under load,also at idle.post in C
    3.4 will run hotter than a 3.0
    explain your cooling solution as far as how many fans,the location of them and the direction of the air flow
    are you overclocked
    what are you using for a thermal interface between the CPU and HEATSINK

Maybe you are looking for