Problem in Submit Statement of Alv Report
Hi All Experts,
i make one report,my requirement is when i execute my report then it displays 100 records, i select 20 records from 100 records
then based upon 20 records execute the another report with out slection screen. i know the process through the submit statement,but it doesn't give exact output 20 of 20 based upon selected entries.
my Code is:SUBMIT ZPS_PROJ_CN41N USING SELECTION-SCREEN '1000' WITH SELECTION-TABLE RSPAR_TAB
AND RETURN.
give suggistions and correct syntax of submit statement.
Thanks.
Hi,
= 'EQ ' for parameters
In for range or selct-options
SUBMIT <Report name>
WITH r_budat IN s_budat " Selection screen parameters
WITH kostl IN s_kostl
WITH kstar IN s_kstar
AND RETURN.
"With Variant
SUBMIT <Report Name>
USING SELECTION-SET 'BPC TEST' "BPC set is Varaint name for report
EXPORTING LIST TO MEMORY AND RETURN.
"capturing the output to another report
SUBMIT <Report name>
WITH r_budat IN s_budat " Selection screen parameters
WITH kostl IN s_kostl
WITH kstar IN s_kstar
EXPORTING LIST TO MEMORY AND RETURN.
Prabhudas
Similar Messages
-
Problem using Submit statement
Dear Experts,
I am trying to use submit statement in a report for transaction ML85. I have used the below code.
submit RMSRVF00 with FRGCO = 'S1'
with FRGGR = 'S1'
with listu = 'ENTRY_REL'
with ebeln = '4500000309'
AND RETURN.
But when I execute the report the values which I set are not filled and the screens opens with error message as '' Fill in all required entry fields". I am passing values for fields Releasecode - FRGCO, Release group - FRGGR, Purchase Order - EBELN, Scope of list - LISTU.
Please tell me why this message is coming and values are not set for fields.
KR,
Bharathhai,
try like this
SUBMIT ZVENDOR_REPORT_NEW1 USING SELECTION-SCREEN '100'
WITH SELECTION-TABLE TB_OUTPUT
WITH P_DATE = SY-DATUM
WITH S_ERDAT BETWEEN '01.01.2008' AND '01.06.2008'
AND RETURN.
or you can go in this way using type pools:
TYPE-POOLS RSDS.
DATA: TRANGE TYPE RSDS_TRANGE,
TRANGE_LINE LIKE LINE OF TRANGE,
TRANGE_FRANGE_T_LINE LIKE LINE OF TRANGE_LINE-FRANGE_T,
TRANGE_FRANGE_T_SELOPT_T_LINE LIKE LINE OF TRANGE_FRANGE_T_LINE-SELOPT_T,
TEXPR TYPE RSDS_TEXPR.
TRANGE_LINE-TABLENAME = 'TB_OUTPUT'.
TRANGE_FRANGE_T_LINE-FIELDNAME = 'S_ERDAT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'BT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW = '01.01.2008'.
TRANGE_FRANGE_T_SELOPT_T_LINE-HIGH = '01.06.2008'.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'NE'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW = SY-DATUM.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
APPEND TRANGE_FRANGE_T_LINE TO TRANGE_LINE-FRANGE_T.
APPEND TRANGE_LINE TO TRANGE.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
FIELD_RANGES = TRANGE
IMPORTING
EXPRESSIONS = TEXPR.
SUBMIT ZVENDOR_REPORT_NEW1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE TB_OUTPUT
WITH FREE SELECTIONS TEXPR AND RETURN. -
Hi All,
I have a problem with the usage of the submit statement.
I have a report program, say report 'A'.
In the report program 'A', I have a custom screen with number '9001'.
In the screen 9001, of program A, there is a button to display ALV.
In the PAI event, under module Module call_report, i am calling another report program say B, using the statement Submit B and return, when the button is clicked.
In the report program B i have a select options. and a docking alv container in it.
Flow of the program is:
1. Run the program A.
2. Select the button on screen 9001.
3. Call the report program B.
4. Enter a value in the select option and run the program B.
5. Go back to program A by selecting back button.
The problem is as at step 4.:
Now, when i press Intervals button ( Arrow mark ) present beside the select option, my program B is getting executed and the list output is being shown.
Kindly let me know what is the problem.you can very well use the submit procedure as suggested above or you also can do "leave to screen '9001' " for the back button.
-
Problem with Page Break In ALV Report
Hi
I have got a problem in my ALV report. I have a checkbox in the user input screen where users decide whether they want a page break or not in the print preview (or print) page. Now i also have the option to have layout name in the input screen. so If i leave the layout box empty the check or not check of page break works fine. but if use a save layout name in the layout box the add check box doesn't work anymore. If i have a layout name in the layout box it doesn't matter whether i have checked for page break or not it does the same thing.(in one report it always puts the page breaked)
Any ideas where to look for the error?
here is the code for the page break. Opt5 is the check box.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'PERNR'.
ls_sort-subtot = 'X'.
IF OPT5 = 'X'.
ls_sort-GROUP = '*'.
ENDIF.
append ls_sort to pt_sort.
ls_sort-subtot = ' '.
ls_sort-GROUP = ''.Never mind it was acting like the page break was not working because the layout was saved with the page break on/OFF.
-
Problem in Print Out of ALV report
Dear All..
I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
i have tried using different formats for printer like :
Format Description
X_PAPER ABAP/4 list: Default list formatting
X_SPOOLERR ABAP list: Spooler problem report
ZX_65_284 65 Rows and 285 Columns
X_65_255 ABAP/4 list: At least 65 rows with a maximum number of c
X_65_200 ABAP list: at least 65 lines with 200 columns (not for a
X_58_170 ABAP/4 list: At least 58 rows by 170 columns
X_65_132 ABAP list: At least 65 rows by 132 columns
X_90_120 ABAP list: At least 90 rows by 120 columns
X_44_120 ABAP/4 list: At least 44 rows by 120 columns
X_65_80 ABAP/4 list: At least 65 rows by 80 columns
but every time the same message appears even on A3 size paper..
i am using REUSE_ALV_GRID_DISPLAY to display ALV.
Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..HI sujeet,
Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
Hiii jyojit..
Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem. -
Problem in submit statement ?
hi friends..
i have one report program (for eg zpgm1) from that i call another program (for eg zpgm2) by using submit statement.
in zpgm1 i have only one radio button
in zpgn2 i have one parameter with obligatory.
the issue is
while executing from zpgm1 it will call the zpgm2 but it show error message like "parameter is required field" because its an mandatory field.
i don't want that message while submit ..
can you plz..
thanx in advancetry this if it works.
in the zpgm2 , instead of making the parameter as OBLIGATORY , do a validation on that field
eg
<b>instead of this</b>
parameters : p_matnr like mara-matnr <b>obligatory</b>.
<b>use this</b>
parameters : p_matnr like mara-matnr.
at selection-screen.
if p_matnr is initial.
message e001(ZE) with 'Matnr is mandatory field'.
endif. -
Problem in Auto Mail of ALV Report : Urgent
Hello All ,
I have created one ALV Report contain 240 Columns . This report is need to schedule for auto mail in HTML Format.
My Problem is when I am sending this report manually the html output displays all the columns in the mail attachment. While it is scheduled thro' SM36 in background mode the HTML format displays only restricted columns (say upto 132 columns)
Also, we have tried to create new page format X_65_512/2 to accomodate the output. However this option did not work.
Any solution to resolve the same is most welcome !
Regards
Swati NamdeoHi
This problem was not resolved. I tried few things but not good. So what we did we created a few profile like MM/SD/FICA and we executed report based on profile and sent them only the column relevant to them.
Regards,
Atul Joshi -
Problem with Submit statement into print program for delivery
Hi all,
i got a problem with the SUBMIT statement that i put into a print program associated to a delivery output message.
If i print the message by VL02N or VL71, everything works.
But if i associate the output with RV56ABST, the SUBMIT instruction isn't accepted and i get the message
"Processor ABAP: POSTING_ILLEGAL_STATEMENT"
There is any solution to this situation?
Why i cannot use the SUBMIT statement in this case?Hi Simone,
you could try to do the operation in a separate task (call a function in starting new task). This will decouple your current process from the new task.
Cheers,
Stefan. -
Write stat below alv report .if i use field catalog.
hi experts,
i want to use write statment after alv report.
note: i am useing fieldcatalog.
i got it if i use standard table with : end_of_list event event.
thank you.Hi snk,
1. It won't work in GRID display.
2. The reason is when grid comes,
it comes on a screen which has container and the grid control.
3. Write statement is displayed on a special screen,
which is generally used for list output.
Normal screens (where we can put textboxes/checkboxes etc),
do not support write statements.
regards,
amit m. -
Problem in excel download of ALV report
Hi All,
I have created an ALV report with 87 fields in it. Whenever I am trying to download that report into excel the number of column breaks into 2 rows. In this case, The downloaded file contains 57 Columns in 1 row and remaining 29 Columns in second row. Can anyone please help me in understanding why this is happening while downloading this report into excel file and what will be the solution to correct it.
To download the file I am using the icon placed at application toolbar or ( Cntrl + Shift + F9 ).
Waiting for your response.
Regards.
PraveshHI Parvesh,
If you want to download the ALV result to you local file however you can follow the below coding.
DATA: l_filename TYPE string,
l_filen TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_usr_act TYPE I.
l_filename = SPACE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
DEFAULT_FILE_NAME = l_filename
CHANGING
FILENAME = l_filen
PATH = l_path
FULLPATH = l_fullpath
USER_ACTION = l_usr_act
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4.
IF sy-subrc = 0
AND l_usr_act <>
CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = l_fullpath
FILETYPE = 'ASC'
TABLES
DATA_TAB = T_DOWNL
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
ENDIF. -
Problem with subtotal calculation in ALV reports
Hi All,
I am doing one program for calculating subtoals in ALV . For this i want to display subtotal text at each envey subtotal 's row.
For that i have created one form 'SUB_SUBTOT_TEXT' and it has given to IT_EVENTS-FORM. But SUB_SUBTOT_TEXT Form is not called by IT_EVENTS event.
what are all the mandatories for displaying subtotal text.
Can any one please help me.
Thanks in Advance.Hi Sree,
*& Table declaration
&----TABLES: ekko.&----
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV&----
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.&----
*& Type declaration
&----* Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
ebeln TYPE char30, " Document no.
ebelp TYPE ebelp, " Item no
matnr TYPE matnr, " Material no
matnr1 TYPE matnr, " Material no
werks TYPE werks_d, " Plant
werks1 TYPE werks_d, " Plant
ntgew TYPE entge, " Net weight
gewe TYPE egewe, " Unit of weight
END OF x_data.&----
*& Internal table declaration
DATA:* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.&----
*& Work area declaration
&----DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.&----
*& Constant declaration
&----CONSTANTS:
c_header TYPE char1
VALUE 'H', "Header in ALV
c_item TYPE char1
VALUE 'S'.&----
*& Start-of-selection event
&----START-OF-SELECTION.* Select data from ekpo
SELECT ebeln " Doc no
ebelp " Item
matnr " Material
matnr " Material
werks " Plant
werks " Plant
ntgew " Quantity
gewei " Unit
FROM ekpo
INTO TABLE i_ekpo
WHERE ebeln IN s_ebeln
AND ntgew NE '0.00'. IF sy-subrc = 0.
SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.* To build the Page header
PERFORM sub_build_header.* To prepare field catalog
PERFORM sub_field_catalog.* Perform to populate the layout structure
PERFORM sub_populate_layout.* Perform to populate the sort table.
PERFORM sub_populate_sort.* Perform to populate ALV event
PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
To build the header
No Parameter
FORM sub_build_header .* Local data declaration
DATA: l_system TYPE char10 , "System id
l_r_line TYPE slis_listheader, "Hold list header
l_date TYPE char10, "Date
l_time TYPE char10, "Time
l_success_records TYPE i, "No of success records
l_title(300) TYPE c. " Title
Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
l_date.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM sub_field_catalog .* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING: '01' '01' 'EBELN' 'I_EKPO' 'L'
'Doc No'(003) ' ' ' ' ' ' ' ', '01' '02' 'EBELP' 'I_EKPO' 'L'
'Item No'(004) 'X' 'X' ' ' ' ', '01' '03' 'MATNR' 'I_EKPO' 'L'
'Material No'(005) 'X' 'X' ' ' ' ', '01' '03' 'MATNR1' 'I_EKPO' 'L'
'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L'
'Plant'(006) 'X' 'X' ' ' ' ', '01' '04' 'WERKS1' 'I_EKPO' 'L'
'Plant'(006) ' ' ' ' ' ' ' ', '01' '05' 'NTGEW' 'I_EKPO' 'R'
'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM. " sub_field_catalog&----
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
p_colpos TYPE sycucol
p_fldnam TYPE fieldname
p_tabnam TYPE tabname
p_justif TYPE char1
p_seltext TYPE dd03p-scrtext_l
p_out TYPE char1
p_tech TYPE char1
p_qfield TYPE slis_fieldname
p_qtab TYPE slis_tabname.* Local declaration for field catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv. wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab . "Quantity table IF p_fldnam = 'NTGEW'.
wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM. " sub_fill_alv_field_catalog&----
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM. " sub_populate_layout&----
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM sub_populate_sort .* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM. " sub_populate_sort&----
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = i_event
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.* Subtotal
READ TABLE i_event INTO l_s_event
WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE c_formname_subtotal_text TO l_s_event-form.
MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM. " sub_get_event&----
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sort
it_events = i_event
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = i_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM. " sub_alv_report_display&----
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
----FORM sub_alv_top_of_page. "#EC CALLED* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_alv_top_of_page.
ENDFORM. "alv_top_of_page&----
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
p_total TYPE any
p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
p_subtot_text-display_text_for_subtotal
= 'Material level total'(009).
ENDIF.* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_text
Hopes its helpful.
Regards,
Raj. -
Problem with User Command in alv report
Hi
I have developed a ALV grid report with drill down capability to transaction code for user command. I am having a trouble with this.
CASE ucomm.
WHEN '&IC1'.
CLEAR: wa_import.
IF selfield-fieldname EQ 'ANLN1'.
READ TABLE t_import INTO wa_import INDEX selfield-tabindex.
SET PARAMETER ID 'BUK' FIELD wa_import-bukrs.
SET PARAMETER ID 'ANl' FIELD wa_import-anln1.
CALL TRANSACTION 'AW01N'.
ENDIF.
here my parameter ids are showing the values but when i call the transaction i am not getting the actual asset numbers.
Can someone help me out this
ThanksHi,
add the AND SKIP FIRST SCREEN...addition..
CALL TRANSACTION 'AW01N' AND SKIP FIRST SCREEN.
Thanks
Naren -
Problem in Back Button in ALV report
Hi Team,
I have created a report which has a selection screen. Based on the input I am showing an ALV OO grid in my custom screen 0100. Now In the system toolbar on my 0100 screen I have enabled back, up and exit button. On click of which I am wrting 'LEAVE TO SCREEN 0. '
But it doesn't take me to the selection screen. Rather it throws me out of the transaction. Can anybody
suggest me a command so that when I click on back button it will take to the selection screen.
Thanks,
MainakHi,
Go through given program it is very usefull for you,
***Correct your program as follows...
PROGRAM rsolett1 MESSAGE-ID sy.
TYPE-POOLS: slis.
data: repid like sy-repid.
DATA: w_fieldcat TYPE slis_fieldcat_alv,
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: w_listheader TYPE slis_listheader,
t_listheader TYPE slis_t_listheader.
DATA: BEGIN OF t_output OCCURS 0,
slno TYPE char10,
name TYPE char10,
lino TYPE char10,
prof TYPE char10,
addr TYPE char10,
fanm TYPE char10,
plbu TYPE char10,
END OF t_output.
w_fieldcat-col_pos = 1.
w_fieldcat-fieldname = 'SLNO'.
w_fieldcat-seltext_m = 'SERIAL NUMBER'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 2.
w_fieldcat-fieldname = 'NAME'.
w_fieldcat-seltext_m = 'NAME'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 3.
w_fieldcat-fieldname = 'LINO'.
w_fieldcat-seltext_m = 'LICENCE NUMBER'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 4.
w_fieldcat-fieldname = 'PROF'.
w_fieldcat-seltext_m = 'PROFESSION'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 5.
w_fieldcat-fieldname = 'ADDR'.
w_fieldcat-seltext_m = 'ADDRESS'.
w_fieldcat-do_sum = 'X'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 6.
w_fieldcat-fieldname = 'FANM'.
w_fieldcat-seltext_m = 'FATHER NAME'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-col_pos = 7.
w_fieldcat-fieldname = 'PLBU'.
w_fieldcat-seltext_m = 'PLACE OF BUSSINESS'.
APPEND w_fieldcat TO t_fieldcat.
CLEAR w_fieldcat.
*PUPULATING TOP-OF-PAGE.
w_listheader-typ = 'H'.
w_listheader-info = 'FORMA'.
APPEND w_listheader TO t_listheader.
CLEAR w_listheader.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = ' '
i_callback_top_of_page = 'SUB_TOP_OF_PAGE'
it_fieldcat = t_fieldcat
i_default = 'X'
TABLES
t_outtab = t_output.
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZPFSTATUS'.
ENDFORM.
Edited by: Ganesh Modhave on Aug 12, 2008 1:06 PM
Thanks&Regards,
Naresh kumar -
In alv report can i use control break events? if no .whay?
Hi all,
in alv report can i use control break events? if no .whay?hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once. -
Subtotals in ALV report for ALPHA-NUMERIC field
Hi Experts,
I have problem while subtotalling values in ALV report.
I have 8 fields in my fieldcatalog. Now, I have to do the subtotal based on 3rd field having name 'ABC'. This field is having type CHAR & having lenght 3.
Now I wanted to do subtotalling for field 7 & 8 as 'NETWR' & 'MENGE' based on 3rd field.
How we can do the subtotal?Hi,
Refer this code
*& Form sub_display_data
text
FORM sub_display_data .
*--To sort the output through material number
DATA : lwa_sort TYPE slis_sortinfo_alv.
DATA : lit_sort TYPE slis_t_sortinfo_alv.
*--Pass the values to the table
lwa_sort-fieldname = 'PERNR'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '1'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = 'X'. "Subtotal
APPEND lwa_sort TO lit_sort.
*--Pass the values to the table
lwa_sort-fieldname = 'WORKDATE'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '2'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = ' '. "Subtotal
APPEND lwa_sort TO lit_sort.
*--Pass the values to the table
lwa_sort-fieldname = 'WEKLY'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '3'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = ' '. "Subtotal
APPEND lwa_sort TO lit_sort.
wa_layout-colwidth_optimize = 'X'.
IF NOT it_final2[] IS INITIAL.
*--Call the function module to display the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
i_callback_program = v_repid
it_fieldcat = it_fieldcat1[]
i_default = c_chk
i_save = c_save
it_sort = lit_sort
TABLES
t_outtab = it_final2
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
*--Message No data found
MESSAGE i888 WITH text-017.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " sub_display_data
Regards,
Prashant
Maybe you are looking for
-
Hello I sent a mixdown of my tracks to a session musician to record his parts but instead of sending a bounce mp3 i sent an M4A by mistake,now his tracks have came back and they just out of sync with the original BPM and i cant seem to be able to mat
-
Getting error: RC-50004 String index out of range when running adclonectx.pl
Hi, I'm trying to clone a RAC database on the same host. I'm using the MOS note: Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone ( Doc ID 559518.1 ) I run the command from Step 5.1.3: perl adclonectx.pl ...... But get
-
Input Menu Reset to US after computer restart
My input menu rest to "US" most of the time after the recent OS X upgrade. This is very strange cos my mac is an Australian one, it was always appearing as an Australian flag at the top before. I am feeling so frustrated now to have reset that back t
-
Render/Lighting/Background colour buttons automatically switch on layers?!
Hi There, I've discovered what is either a bug in Acrobat 3D v7 or a problem with my scripting (most likely the latter!). I have a series of buttons that i've scripted so that when pressed, switch on/off various objects. However, when any of the Rend
-
How do I copy a DVD to my iTunes library?
Yes, I have two Star Wras DVD's that I got for Christmas and I want to add them to my iTunes Library. Can I copy them to my computer and if so how do I do this?