Problem Installing Microsoft Works 4.0 c

My internal hard drive crashed (died) with all of my applications (programs) on it. I have successfully installed back all of my applications from the original program disks with the exception of Microsoft Works Vers. 4.0c. Works will not install the original software back on my HD even though I have the original Works program installation disks. I get the following error messages when I try to run the Installer program on the Works program floppies. 1st error message: Microsoft setup was not completed successfully. 2nd error message: Setup was unable to locate a valid setup table file and cannot proceed without one.
When the crash occurred I had my system folder running OS 9.1 on my other Internal HD so I did not have any startup issues, etc. (thankfully)
I have a gut feeling that because I still have some Works files in my system folder they may be causing the setup program from running properly.
I am hoping someone knows a work around to help me get Works installed back on my HD.

Jan.
I doubt that I have any problems with the install disks, I copied the 68K Vers. of the Microsoft install disk just as you had explained using disk copy 4.2------------it copied perfectly and when I tried to use the copy I got the same errors as I mentioned in my original post. I did not do the checksums as you had mentioned because the disk and the backup I made are working perfectly. I have not gotten any kind of error code that would be linked to a problem with the disks. My floppy disk drive has never caused me a problem in the past so I have no reason so suspect the floppy drive as being the issue.
I think the Micosoft Works error messages hold the key to the problem. Especially the error that says "setup was unable to locate a valid setup table file and cannot proceed without one", if I only knew what a valid setup table file was I might be able to dig deeper into the issue!!
I also ran Disk Warrior from the Disk Warrior CD to check out my Hard Drive, Warrior found some issues with my Hard Drive which it fixed--------I then tried the Works install disk again after fixing the errors with Warrior but had the same errors. ????????
Thanks for your input but we are still out in the woods!
.ld
I

Similar Messages

Problems Installing Microsoft Office 2004 on 10.4.3!

Hi all,
A friend of mine just purchased 10.4.3 from the Apple Store for use with his G5 (the original single 1.8). My friend is not very skilled with computers, so I have been helping him get 10.4 running.
• We wrote zeros to his hard drive.
• We then did a fresh installation.
• We then ran software update.
• Apps like Photoshop Elements have installed without problems.
Microsoft Office 2004 (Student and Teacher) will not install using the installer or drag-and-drop.
• The installer finishes but the Office 2004 apps are not on the Hard Drive!
• Drag-and-Drop encounters an error (-36 I think) and stops installing.
Obviously, my friend is disappointed that Office will not install on a fresh OS - Please help!
PowerBook G4 Mac OS X (10.4.3)

Hi all,
Templeton Peck may have been correct after all! I just got this message from Microsoft Support moments ago:
Thank you for requesting support for Microsoft Office 2004 for Mac. My name is Mike and I will be working with you to resolve this issue.
As I Understand you are Recieving an Error when installing Office 2004, which is not allowing you to Complete the installation.
With Error 36 There is only one thing to do, you will need to contact our Replacment Product Department for a new disc, you can contact them by calling 1-800-360-7561
Please let me know if this resolves your issue.
Thank you for using Microsoft Technical Support...
I guess I'll give a new disk a try -- I'll report back once I've tried that. :~)
rawbertow789

Error messages when trying to install Microsoft Works 4.0 on my Hard Drive

My internal hard drive crashed (died) with all of my applications (programs) on it. I have successfully installed back all of my applications from the original program disks with the exception of Microsoft Works Vers. 4.0c. Works will not install the original software back on my HD even though I have the original Works program floppy disks. I get the following error messages when I try to run the Installer program on the Works program floppies. 1st error message: Microsoft setup was not completed successfully. 2nd error message: Setup was unable to locate a valid setup table file and cannot proceed without one.
When the crash occurred I had my system folder running OS 9.1 on my other Internal HD so I did not have any startup issues, etc. (thankfully)
I have a gut feeling that because I still have some Works files in my system folder they may be causing the setup program from running properly.
I am hoping someone knows a work around to help me get Works installed back on my HD.

And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium

Having problems installing Microsoft Office in my Lenovo S10

I have been trying to install microsoft office for students in my Lenovo S 10, I upgraded my Ram so have enough space and I am using an external DVD writer model SE-SO84 by Samsung...Is there something I should know??? Thanks

Hi all,
Templeton Peck may have been correct after all! I just got this message from Microsoft Support moments ago:
Thank you for requesting support for Microsoft Office 2004 for Mac. My name is Mike and I will be working with you to resolve this issue.
As I Understand you are Recieving an Error when installing Office 2004, which is not allowing you to Complete the installation.
With Error 36 There is only one thing to do, you will need to contact our Replacment Product Department for a new disc, you can contact them by calling 1-800-360-7561
Please let me know if this resolves your issue.
Thank you for using Microsoft Technical Support...
I guess I'll give a new disk a try -- I'll report back once I've tried that. :~)
rawbertow789

App Download manager had problems installing Microsoft C++ 2008

I used download app for Creative Cloud - illustrator / Photoshop / Premier / After Effects all had this error log - should i worry?
They seem to be running OK
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW016 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 2 warning(s) WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0 WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0 ----------- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 ----------- ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Josh\AppData\Local\Temp\{40299384-E9DB-47B4-B4F7-52C767EF7421}\Prelude_1_LS7\Adobe Prelude CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed

I think the solution is present there itself ,
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64).
Please try installing it by double clicking on the executable at
"C:\Users\Josh\AppData\Local\Temp\{40299384-E9DB-47B4-B4F7-52C767EF7421}\Prelude_1_LS7\Ado be Prelude CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe",
or
download and install the
latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com

Problem Instaling Microsoft Apps 2.1 5616

Can not install update Microsoft Apps 2.1 5616 and previously used the 2.00 version.I've tried to solve the problem with reinstal Belle Refresh but again it was the same through the Nokia Suite and via OTA Helppppppppp!!!!!
Solved!
Go to Solution.

We removed the many posts with screenshots as your description is quite clear and these posts do not really add any extra information. Have you attempted to do a fresh install of your device? Follow the procedure below to do a full device reset and (re)install of the system firmware:
If you have data on the phone you wish to keep create a backup using Nokia Suite but when asked deselect the option to include settings in the backup. You can start a backup through Tools>Backup in the Nokia Suite menu.
Now disconnect your phone from the PC and select the offline profile, press the on/off switch and from the menu which appears select and activate the profile offline.
Enter the code *#7370# followed by the security code 12345. Please be aware this reset may take a while. Your phone will restart when finished.
After the phone restarts go through the Device First Use sequence to setup the phone correctly.
Now connect the phone to your PC again and let Nokia Suite install the requires files on phone. After this (re)install the latest system update. When you go to the update screen in Nokia Suite your will either be presented by a system update or you can choose to re-install the current (up to date) version again.
After the update verify if there are any additional updates and install these as well.
After this you can restore the backup if you made one.
It is possible that your device storage area requires a full rewrite to allow the installation of these apps, if the above does not resolve the ability to install the apps please visit a Nokia Care point for further assistance. You can find the nearest one through the 'Contact us' section on this page.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Problem Installing Microsoft Visual Studio Professional 2010 in my laptop ( OS: Windows 8.1 64bit )

hi staff of microsoft or anybody,
I have problem installation of VS pro in my laptop windows 8.1 (64bits) using web installer and offline unzipping iso. BTW i have VS 2013 installed in my computer at the moment. Before i
upgrade from windows 8.0 to 8.1 , i used to have VS PRO 2010 but after installing VS 2013 it was uninstall automatically,
I keep getting this popup of error: DDSet_Error: Internal error: 1009 ( while installing Visual Studio 2010 Professional ) . Could somebody tell me what is the solution because i need VS 2010 for my project. thanks in advance for anybody who could
provide me the solution , thanks a lot

Hello SuperWeb,
I have checked you logs and find something which may related to this issue:
1. WIN64DUALFOLDERS: Substitution in 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Microsoft.VisualStudio.vspGridControl.dll' folder had been blocked by the 1 mask argument (the folder pair's iSwapAttrib member = 0).
2. Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
The folder substitution is blocked and the RemoveDirectoryAndChildren meet access denied in your setup. May I ask a few questions:
1. Do you have admin privilege and have you run your setup with admin
2. Do you have any ant-virus software installed on your OS which may blocked Visual Studio from installing?
I will recommend u refer to this blog:
http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx
You can then run a script to give all your folders and registries admin permissions. Let's see if you can install your setup after that.
By the way, the checksum can be checked by using this tool from Microsoft:
http://support.microsoft.com/kb/841290
However since I cannot download ISO from DreamSpark as I'm not a student, I cannot help you verify it. Please contact your vendor to know the exact ISO hash number. A good ISO is required before you start the install process.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Having problems printing microsoft works 8.5 documents

I'm using hp deskjet 5150. Windows xp (sp3). works 8.5
I've tried deleting and installing the printer hardware. I just can't print the previous documents saved?
I NEED HELP PLEASE. Oh when i print the document it prints the heading of the letter I've typed...one time i was getting a blank page. I can print other things but not in works and wordpad.

I'm using hp deskjet 5150. Windows xp (sp3). works 8.5
I've tried deleting and installing the printer hardware. I just can't print the previous documents saved?
I NEED HELP PLEASE. Oh when i print the document it prints the heading of the letter I've typed...one time i was getting a blank page. I can print other things but not in works and wordpad.

Problems installing Microsoft Office for iMac

I am trying to install the (free) trial version of MS Office Suite for my iMac. Even though I've closed all other programs, I get a warning window saying that the install can't be completed because Safari is open, which it isn't. The installer prohibits me from being able to logoff or shutdown through the Apple menu, I have to do a hard restart. I dragged the download into the trash folder and re-downloaded it and I got the same problem when I tried to install.
A little help?

You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

Problems installing component works

I get the message "The ordinal 6467 could not be located in the dynamic link library MFC42.DLL", then after hitting "OK" I get "Unable to register C:\WINNT\SYSTEM32\CWUI.OCX"
What could be wrong?
Win2000 pro
visual basic
pentium 3
512meg ram

It sounds like another product that has been installed on your machine installed an old or bad mfc42.dll and it could have possibly overwritten your previous version of mfc42.dll. For some ideas on how to fix this, see the Microsoft Knowledge Base article "Linked to Missing Export Mfc42.dll" Error Message After You Install Money. This article discusses the error in the context of Microsoft Money, but I think that the resolution steps could be helpful in your case as well.
- Elton

T61 problems installing microsoft office 2010

I`ve recently purchased a lenovo ThinkPad t61 with Windows 7 preinstaled on it.
I`ve noticed that it didn`t came with Microsoft Office Pack so i`ve took one from my other laptop.
When i hit the "setup.exe" it prompts me with the administrator acceptance i click yes, its opens for a second some kind of commander windows and then stops everything...

Try with right-mouse click and selecting "Run as administrator"
One questions though, when you say:
danutzurs wrote:
I`ve noticed that it didn`t came with Microsoft Office Pack so i`ve took one from my other laptop.
Did you copy the content of the folder from another laptop? Or did you had a copy of the installs CD in it?
Hope this helps!
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Problems Installing Cisco Works 4.2 Evaluation Version

Hello, I'm trying to test Cisco Works LAN Management Solution 4.2
I have a partition in my laptop to test this software but after the installation process i'm unable to access via http to the server,
I does not display anything.
Please help me!

Doublecheck your prerequisites as Vinod suggested. LMS is very particular about you meeting ALL the prerequisites exactly. If some are missing it will notify you during installation. Others may not generate an error but will leave you with a non-working setup.
When you machine starts, it takes as long as 15-20 minutes for LMS to be fully functional. There are many background processes started by the daemon manager. There is a shortcut to see if all are finished starting by watching for the "ready" folder (NMSROOT\objects\dmgt\ready is the default location) to be empty. As CiscoWorks LMS starts up, that folder will at various times have lock files put into it as the processes start.
The pdshow command enumerates the status all of the background processes.
Yes, NMSROOT is the parent folder for your installation. The default location for NSMROOT in Windows is under C:\Program Files\CSCOpx. You can confirm on your installation by checking your environment variables under Windows Server.

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

I have a problem installing itunes (10.7)....it says that i've installed itunes successfully, but when I try to open itunes, it says that itunes have stopped working!

i have a problem installing itunes (10.7)....it says that i've installed itunes successfully but when I click on the shortcut, a popup box states that "Itunes have stopped working and asks me to either search via windows for solution or close program"

Yes, you should be on Quicktime version 7.7. by now. Have you ever used Software Update?
You can download it from here:
http://support.apple.com/kb/DL761

Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C

Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C++?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
littlered1382 wrote:
I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

Problem Installing Microsoft Works 4.0 c

Similar Messages

Maybe you are looking for