Problem: it bounces only the selected track

I'm having this problem when bouncing a project: it bounces only the selected track on the arange window, so I can't select the output 1-2 to get the bounce of the whole project because it does not appear in the arrange window, only in the environment or the mixer
So, first of all: anyone does know why is this happening? Is just an issue or maybe I'm doing something wrong?
And, if it's an issue, how could I create a track in the arrange window assigned to the output 1-2, so I can select it to bounce the whole project?
Thanks in advance
Message was edited by: ardigaldu

You're mixing up something here. Outputs 1-2 don't have to appear in the Arrange window if you want to perform a bounce of your project and it doesn't matter which track is selected in your Arrange as long as you don't have Solo mode activated (either in the mixer or in the transport window).
Make sure solo mode is off - press the little bounce button at the bottom of Outputs 1-2 (or assign a Keycommand to the bouncing function) - set the locators for start and end point - select the file format and off you go.
If you want Outs 1-2 in your Arrange just right click on the Outs in your mixer - menue opens - select "create Arrange track".

Similar Messages

Loading only the selected item

I am developing a data binding app where the source data is stored in the following format:
public void LoadData()
// Sample data; replace with real data
this.Items.Add(new ItemViewModel() { ID = "0", LineOne = "runtime one", LineTwo = "Maecenas praesent accumsan bibendum", LineThree = "Facilisi faucibus habitant inceptos interdum lobortis nascetur pharetra placerat pulvinar sagittis senectus sociosqu" });
this.Items.Add(new ItemViewModel() { ID = "1", LineOne = "runtime two", LineTwo = "Dictumst eleifend facilisi faucibus", LineThree = "Suscipit torquent ultrices vehicula volutpat maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus" });
this.Items.Add(new ItemViewModel() { ID = "2", LineOne = "runtime three", LineTwo = "Habitant inceptos interdum lobortis", LineThree = "Habitant inceptos interdum lobortis nascetur pharetra placerat pulvinar sagittis senectus sociosqu suscipit torquent" });
this.Items.Add(new ItemViewModel() { ID = "3", LineOne = "runtime four", LineTwo = "Nascetur pharetra placerat pulvinar", LineThree = "Ultrices vehicula volutpat maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos" });
this.Items.Add(new ItemViewModel() { ID = "4", LineOne = "runtime five", LineTwo = "Maecenas praesent accumsan bibendum", LineThree = "Maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos interdum lobortis nascetur" });
this.Items.Add(new ItemViewModel() { ID = "5", LineOne = "runtime six", LineTwo = "Dictumst eleifend facilisi faucibus", LineThree = "Pharetra placerat pulvinar sagittis senectus sociosqu suscipit torquent ultrices vehicula volutpat maecenas praesent" });
this.Items.Add(new ItemViewModel() { ID = "6", LineOne = "runtime seven", LineTwo = "Habitant inceptos interdum lobortis", LineThree = "Accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos interdum lobortis nascetur pharetra placerat" });
this.Items.Add(new ItemViewModel() { ID = "7", LineOne = "runtime eight", LineTwo = "Nascetur pharetra placerat pulvinar", LineThree = "Pulvinar sagittis senectus sociosqu suscipit torquent ultrices vehicula volutpat maecenas praesent accumsan bibendum" });
this.Items.Add(new ItemViewModel() { ID = "8", LineOne = "runtime nine", LineTwo = "Maecenas praesent accumsan bibendum", LineThree = "Facilisi faucibus habitant inceptos interdum lobortis nascetur pharetra placerat pulvinar sagittis senectus sociosqu" });
this.Items.Add(new ItemViewModel() { ID = "9", LineOne = "runtime ten", LineTwo = "Dictumst eleifend facilisi faucibus", LineThree = "Suscipit torquent ultrices vehicula volutpat maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus" });
this.Items.Add(new ItemViewModel() { ID = "10", LineOne = "runtime eleven", LineTwo = "Habitant inceptos interdum lobortis", LineThree = "Habitant inceptos interdum lobortis nascetur pharetra placerat pulvinar sagittis senectus sociosqu suscipit torquent" });
this.Items.Add(new ItemViewModel() { ID = "11", LineOne = "runtime twelve", LineTwo = "Nascetur pharetra placerat pulvinar", LineThree = "Ultrices vehicula volutpat maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos" });
this.Items.Add(new ItemViewModel() { ID = "12", LineOne = "runtime thirteen", LineTwo = "Maecenas praesent accumsan bibendum", LineThree = "Maecenas praesent accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos interdum lobortis nascetur" });
this.Items.Add(new ItemViewModel() { ID = "13", LineOne = "runtime fourteen", LineTwo = "Dictumst eleifend facilisi faucibus", LineThree = "Pharetra placerat pulvinar sagittis senectus sociosqu suscipit torquent ultrices vehicula volutpat maecenas praesent" });
this.Items.Add(new ItemViewModel() { ID = "14", LineOne = "runtime fifteen", LineTwo = "Habitant inceptos interdum lobortis", LineThree = "Accumsan bibendum dictumst eleifend facilisi faucibus habitant inceptos interdum lobortis nascetur pharetra placerat" });
this.Items.Add(new ItemViewModel() { ID = "15", LineOne = "runtime sixteen", LineTwo = "Nascetur pharetra placerat pulvinar", LineThree = "Pulvinar sagittis senectus sociosqu suscipit torquent ultrices vehicula volutpat maecenas praesent accumsan bibendum" });
this.IsDataLoaded = true;
This will load all the items and refresh the data. The problem is as the number of items and content increases the delay in clicking the option and getting the content visible is significant and cannot be ignored. This is more annoying since the data
is static and once loaded, it never changes. I am thinking of improving the data refresh rate and looking for ways to load only the data for the selected item and not for all the items listed above.
Anyone has any good suggestions?
Thanks,
Aiseduk

Hi Toni,
Thanks for your reply. I am not too sure about ListBox virtualization. Can you please elaborate how it can help me in my scenario? As of now, I am exploring few possible options to achieve what I am looking for:
1. How to restrict LoadData() to load only the selected item? Since this will only load one item performance will be better on selecting the option. Is there any way to limit "this.Items.Add(new
ItemViewModel()" so that once an item is loaded, the flow jumps to
this.IsDataLoaded =
true;
2. Is there any way to create multiple LoadData() instance and connect them using Case/Switch to the available option? This will only initiate the LoadData() for that particular instance of selected item.
2. Take the performance hit once. Since the data is static and do not change later on do we have any option to load data once and prevent it from refreshing later on every time an option is selected? Will this impact any features depending on system (like
theming)?
3. Create multiple pages, one for each ID, and then somehow link them to the selected items in the list? I am able to achieve this, but this makes my project unnecessary bulky and difficult to manage.
Once again, thank you very much for helping me on this.
Aiseduk

How do view ONLY the selected clip?

Is the sequence marker the ONLy way to view a selected clip(s) -- along with the Play-In to Out button?
Often times, I just want to view just one clip in the timeline after I've added effects. If I don't set a sequence marker, PPro plays the entire sequence in the entire timeline of the project, which is more than what I want to view.
Is there any other way, other than setting sequence markers, to view JUST the selected clip(s)?
I thought that, intuitively, selecting a clip (or group of clips) with my pointer would by default playback ONLY the selected clip(s). But I guess not.

I used the work area bar and it did nothing. I played the clip(s) under the work area bar, but it continued playing beyond the bar. Also, when I hit Play again, it started from the beginning of the timeline, not the beginning of the clip under the bar. So, the work area bar seems to only have use when you want to preview something by rendering the tracks under the bar. Otherwise, nothing special. The work area bar is useless to me, unless someone shows me the light.

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

Need to fetch only the select statement

Hi ,
I am able to fetch all the select statements from my program if program name as my input.
I want only the select statement where we fetch the field entries like
select single from mara
select * from mara
select count(*)
select matnr from mara
like this i want to fetch i dont want to display the select-options or start-of-selection .

Hello Shwetha
If the function module <b>RS_PROGRAM_TABLES</b> (function group <b>SEA1</b>) is available on your system you can run this fm with the following parameters:
- OBJECT_TYPE = 'TRAN' " transaction
- OBJECT_NAME = 'VA03' " example
- OBJECT_TYPE = 'PROG' " report
- OBJECT_NAME = 'SAPMV45A' " example: report executed by VA03
The fm returns you a list of tables that are accessed.
Regards,
Uwe

I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.

Bei aktalisierung erfolgt das download, nach ende Download kommt Fehlermeldung fehler beim Download (Installation nicht möglich, Versuchen Sie es später noch einmal.
Kennt jemand das Problem, was kann ich tun?
Harald Bässle
Emailaddresse: [email protected]

Hello,
I installed the newest Application Manager some updates seems to be installed now but extension manager CS5 5.0 update is not successful > error code U43M1D207. What I must do?
I this the right way t answer?
Whating for reply
Thanks
Harald
Von: R_Kelly
Gesendet: Freitag, 29. August 2014 03:41
An: Harald Bässler
Betreff: I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <https://forums.adobe.com/message/6683157#6683157>

I am trying to upload a project with multiple tracks to iTunes. only the first track seems to be uploading. what do I do?

I am trying to upload a project from garageband with multiple tracks to itunes but only the first track is uploading. what do i do to make them all upload together?

Couple of questions:
What type of Tracks are they (MIDI, AUdio, Drummer)?
WHen you play your Project, do You hear all Tracks playing?
What happens when you change the Track order, i.e. A-B-C to B-C-A? WHen you export, do you still get only one Track and if so, is it talways the first Track in the list or a specific Track regardless if it is the first, second, or third?
Are you sure you don't have any Tracks Muted or Soloed (which auto-mutes the other Tracks)?
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to get only the selected layer data?

Hi All,
I'm using dissolve sample plugin. I added two layers in photoshop both of different dimensions, say 1000 * 1000 & 2000 * 2000. Now I select the layer with 1000 * 1000 dimension and click on Dissolve plugin. The preview image what is shown in dissolve plugin dialog is not just the selected layer, but also some extra pixels around the selected layer.
Do I need to set any flag for getting only selected layer data to display in preview?
Also I need to get only the selected area in a particular layer. When I checked FilterRecordPtr, haveMask flag is TRUE if the part of the layer is selected. But how do I get only the part of the layer that is selected for displaying preview image?
Please let me know if the description is not clear.
Thanks,
Dheeraj

Thanks Tom Ruark for the response.
That is exactly the same thing what I'm seeing.
1.Is there a direct way to know the bounds of the layer without the transparency grid so that I can show only the layer?
2. If I select an area of 50*50 within a layer(1000*1000) using Rectangular Marquee tool, then I want only that selected area to be shown in preview. For this there is a haveMask flag which indicates whether or not there is selection, but the selected bounds are not available. I'm currently calculating the bounds. I just wanted to know if Photoshop SDK has any field for getting the bounds?

When I try to map faders to the volume in audio tracks it only lets me map the "selected track"

LogicX user. I'm trying to map my mpd32's faders up with four audio tracks to control their volume. For the first three tracks, I can map the faders accordingly, and in the Controller Assignments window, in the "channel strip" section on the right, they all say "fader bank (1-3)", which is correct. When I get to the fourth audio track, and I go through the same steps as I have to map the first three audio tracks, the channel strip section says "selected track: 1" instead of what I thought it would say: "fader bank 4". When I try and manually change that to "fader bank 4", I move the control that I want it to be mapped to, it and the text automatically switches back to saying "selected track 1". I made sure that none of the tracks that I was trying to map were selected before I did this. I'm not new to logic by any means but I seriously need to be able to control these all at the same time for a performance I'm trying to do soon. It is driving me ******* crazy.

David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

Problem with checkbox in the selection screen

Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.

Hi d p
             Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M                                        *
*INCLUDE znrpstnd.
Selection Screen                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
            p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                   s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
            p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
             p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'.   " Outbound --> Hide inbound
    LOOP AT SCREEN.
      "IF screen-name = '%BT02011_BLOCK_1000'.
      IF screen-group2 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      "IF screen-name = '%BT01004_BLOCK_1000'.
      IF screen-group3 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path2
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path3
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon

PodCast: problem adding photos to the Podcast Track!

Hi all,
I was just making my 1st podcast when I encountered a strange problem: I wanted to drag&drop photos from the media browser but not all of them worked!
Some photos could be dropped without a problem (instatntly visible by the green + ball sticking to the mouse pointer) while with others this green + icon doesn't appear and the photo won't drop into the Podcast Track.
I consulted the GB Help but to no avail.
However, I observed the following: all my photos in portrait format work and all my photos in landscape format don't work.
The photos are taken with my DSLR camera and have a resolution of 3008x2000 pixel.
So, together with the portrait/landscape observation: could it be that 2000 pixel by 2000 pixel is the max size of a photo so that it can be dropped onto the Podcast Track?
A double click on a photo in the media browser doesn't open GB's own little photo editor (opposed to when you double click on a photo in the markers track list) so one can't crop the photos within GB.
So, do I need to crop the landscape 3008x2000 images in iPhoto (or any other sim. app.) first?
Any comments?
Thanks a lot & cheers from Germany,
Stefan.

Hey Stefan,
A couple of potential issues here. First off you may be right that there's some type of file size limit issue, either because there's a max filesize built-in, or because since you're able to "scale" your photos for display within the chapter/markers area, maybe GB wants a file it knows it can work with reasonably.
Secondly, I'd be wary of putting lots of large photos in your cast, as that may contribute to giant file sizes on export. The one thing you might want to test is to see what GB does with the photos when you've selected the Preferences>Export>Set Artwork to recommended size for Podcasts check box.
Or maybe try unchecking that box (if you have it checked now) and then see if a big photo can then be brought in.
What I've been doing with large photos is exporting them from iPhoto at a smaller scale, then importing them into a new album, or in the case of images from the web, just adding them to iPhoto and scaling them in GB in the chapter markers area. I also use Photoshop to "pre-scale" but I wouldn't think it was necessary just for a Podcast.
Hopefully this helps.

Problem with re parenting the selected component of a JTabbedDisplay

I have a number of JPanels in a JTabbedPane.
I have a mouse listener on the JTabbedPane which displays a popup menu...
one of the options on the menu is Dislpay Tab in Own Window.
The action of the menu is basically ...
Component c = jTabbedPane1.getSelectedComponent();
JFrame f = new JFrame();
f.getContentPane().setLayout(new BorderLayout());
f.getContentPane().add( c,BorderLayout.CENTER);
The component c is removed from the tab - the frame appears .. but the component is not in the frame.
Can anyone offer any insite into what is going wrong.... its driving me mad.
thanks in advance.

I dont think thats the problem because if instead of adding the selected component to the JFrame I add it back to the tabbed panel with addTab("new",c) ... it works.
but I think I have a workaround...
tab.invalidate();
tab.remove( c );
tab.validate();
c.setVisible(true);// overkill
JPanel p = (JPanel)c;
< < add p to the JFrame>>
p.setVisible(true);// <needed
its this last setVisible which makes it work ... for some reason , the component is being set visible(false) when the tab does the remove.

Bugreport: Seed updates all languages, not only the selected one

I just encountered a "Bug" when seeding a multilingual translation.
It looks as if SEED would insert only values for the chosen language mapping (good!), but in case of an update overwrite the values in all languages, not only the chosen one.
I know it is not that bad, but causes some irregular statistics after seeding.
e.g. my applications main language is "eo", language mappings for "en", "de", "es".
When i change a single text (e.g. button label) in the main app and do a seed for "en" i get "3 existing attributes updated and may require translation" (because there are 3 languages...). when i do a seed for "de" right afterwards i get "0 existing attributes updated and may require translation".
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

Apparently you have more choice than you are aware of. Thunderbird has three ways to sear messages.
I am guessing from what you say that you want to '''find''' (Ctrl + Shift + F) instead of '''global search''' (Ctrl+K) or '''quick filter''' (Ctrl + Shift + K)
Note that global search offers options
<img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-25-16-49-59-21b72c.png" height="106" width="217">
First your messages
Then the internet
Then people in your address book
''Yes I know your a mac user, but they tell me macs have a CTRL key these days an you do not need to use3 command''

Does anyone know of an iTunes 11 plugin that shows the album art preview of the selected track in the bottom left?

In previous versions of iTunes, there was a little box at the lower left side of the screen that displayed the album artwork of whatever track you had selected (or whatever track was playing, depending on your settings).
I really miss this feature, as many others do. I have considered downgrading to 10.7, but my iPhone 5 is running 6.1 and I don't think the two will work together..(any way around this?)
I really don't know much about iTunes plugins, but could they be a possible solution to this problem?
Does anyone know of one (or could anyone write one) that could help me and many others get that album art preview back?
Thanks!
-Nick

Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC.

Problem: it bounces only the selected track

Similar Messages

Maybe you are looking for