Problem loading Stocks Via LSMW

Hi,
I am doing LSMW using the standard programe as you mentioned also i.e Batch Input
Object 0110 Goods movement
Method 0000
Program Name RM07MMBL
Program Type B Batch Input
But i get an error when i go to SPECIFY FILES and there i provide a file and press save saying "No Logical path has been specified". Can anyone pls help me.
Thanks!
Arun

in 'Specify file' double click the last knot which has the file name of converted data. A pop-up will come up where you can enter a logical file name and path.
This can be created with transaction FILE if it does not exist..
there is a very good OSS note 35992 that explains
Futher specific to LSMW there is OSS note 753511 that describes what to do.
If you have authority for x-client customizing then you can directly type a name for logical path and file name
e.g. LSMWLOGPATH and LSMWLOGFILE, hit enter and LSMW will create the logical path and file name for you.and you dont need to do it with transaction FILE.

Similar Messages

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

Maintain Text in Infotype 0041 via LSMW

Hi,
Has anyone had success loading text into Infotype 0041 via lsmw?
I am trying to create an lsmw to maintain text in infotpye 0041. I follow the route PA30, then when in IT0041 I go to edit and maintain text.
The problem is that I get a syntax error because the field I am trying to update is RSTXP-TDLINE which is a length 0 and format type string. LSMW won't accept string fields so in the generated program for the lsmw the line reads: "tdline_01(000000) type c,". This obviously doesn't pass the syntax check.
Any help greatly appreciated.
Regards,
Warren.

Hi
I just tried to create a LSMW in my DEV environment. I didnt get any error when recording. I entered the text in IT41 without any issue. What I am getting in the source code is:
RSTXP-TDLINE(01) Abcde TDLINE_01 ABAP Source Line
Am I missing what you are seeing?
Cheers
Pramod

I get problem loading page (error 404) it says the page cannot be found when i try to access the game Mobsters through my mysapce account and i cannot access it no longer through firefox and i want to find out why i cant, can you guys please help?

i cant access my mobsters account through myspace. every time i try to access it i get "problem loading page" "this page cannot be found" "404 error" and it wont let me access it. myspace works fine but as soon as i click on the mobsters app i get the 404 error, this page cannot be found, problem loading page! can you please help?
== This happened ==
Every time Firefox opened
== i try to access mobsters game through myspace

I dont understand the answer
'''''""The problem can be solved by opening FF and choosing Tools...Add On's...select the SEARCH addon and choose UNINSTALL...restart FF browser when asked, then reload Mobsters. This worked for me. The suggestion on the 404 that says to remove Search via Add/Remove Programs is completely BS, as Search doesnt show there. ""'''''

Master data upload via LSMW using IDoc method

Dear all,
I know this has been a topic of many discussions but I would like to ask you is to share your thoughts and possibly experience with the following scenario:
Interface between non-SAP system and SAP system has to be built whereby master data gets created in the non-SAP system and has to be uploaded into SAP. This is a process that needs to be performed on a constant basis and hence my question: is there a way that the MD upload takes place in the background via LSMW with IDoc? Or any other way, for instance, with a flat file, etc.?
Thank you very much for your input!
Regards,
Miro

Miro - It depends upon many factors
1. Number of source systems
2. Volumn of recorsds ( Data to be loaded)
3. Transformation needed or not needed from S to D ( source to destination), We may consider it as
business rules/mapping
Based on above you may segrigate the objects related to data, eventually you can shoose approach of loading in SAP,
As if straigt forward load for some 20k-30K records ( Just a file load on regular basis), one to one mapping then go for LSMW, if some complex transformation logic needed then go SAP data services implementation. best part here is if you multiple sources that can be handeled here.
Accordingly you can proceed ...
Hope it helps.
Best !
Deep

Problem using image via URL

Hi everybody
I have a problem with loading images via URL into my PDFs.
I am using LCD ES2 Version 9.0.1....
I want to create a PDF which loads images from the internet but it does not work.
So far I have tried to add an image or image field to my PDF in the LCD and populate that image using the Object-->Field-->URL: palett. I put the URL in there like this http://www.adobe.com/imageshome/pdfgift_home.gif , tick the "embed image Data" checkbox (also tried with without that just to be sure) and save as Dynamic PDF (I also tried static) but when I open the PDF in adobe reader 9 or 10 or acrobat 9 there is no image showing. I also put the image in a subform and made that subform flowed, as well as the page itself and made the binding global.
I have the form properties - default set to "Acrobat and Adobe Reader version 9.0 or higher", Default Language to JavaScript, PDF Render format to Dynamic PDF.
I also tried using JavaScript events like "form:ready ImageField2.value.#image.href = "http://www.adobe.com/imageshome/pdfgift_home.gif" as discribed here http://partners.adobe.com/public/developer/en/tips/lc_dynamic_images.pdf but that also does not work.
What am I missing?
Any help would be great and greatly appreciated!!!
Thanks and best regards
Norbert

As far as I can tell, this use case is not allowed because of cross site references related security concerns. The form can refer to the images stored on the same server from where the PDF is served, but the images cannot come from external servers.

Loading dimension via plsql

Hi
I am trying to create a dimension and load it via plsql and am able to create dimension and its corresponding table in database.I am quite unsure of how to load the dimension D_OFF from an equivalent relational table R_OFF
I have a dimension D_OFF with following structure.
Hierarchy:OFFKEY is child of OFF30 is child of OFF20 is child of OFF10
Levels -->Attributes
OFF10 ID--> CD ,DSCR
OFF20 ID -->CD ,DSCR
OFF30 ID-->CD ,DSCR
OFFKEY ID-->CD,DSCR,UPDATE BY,UPDATE_DATE,CREATE BY, CREATE_DATE
I have created the dimension and the table structure in the database and are as follows
CREATE DIMENSION D_OFF
LEVEL "OFF10" IS "OFF10_ID"
LEVEL "OFF20" IS "OFF20_ID"
LEVEL "OFF30" IS "OFF30_ID"
LEVEL "OFFKEY" IS "OFFKEY_ID"
HIERARCHY "STANDARD" (
"OFFKEY" CHILD OF
"OFF30" CHILD OF
"OFF20" CHILD OF
"OFF10"
ATTRIBUTE "OFF10" DETERMINES ( "OFF10_CD", "OFF10_DSCR" )
ATTRIBUTE "OFF20" DETERMINES ( "OFF20_DSCR", "OFF20_CD" )
ATTRIBUTE "OFF30" DETERMINES ( "OFF30_DSCR", "OFF30_CD" )
ATTRIBUTE "OFFKEY" DETERMINES ( "OFFKEY_DSCR", "UPDATE_DATE", "OFFKEY_CD", "UPDATE_BY", "CREATE_DATE", "CREATE_BY" )
CREATE TABLE "D_OFF"
( "DIMENSION_KEY" NUMBER NOT NULL ENABLE,
"OFF10_ID" NUMBER,
"OFF10_DSCR" VARCHAR2(200),
"OFF10_CD" VARCHAR2(500),
"OFF20_ID" NUMBER,
"OFF20_CD" VARCHAR2(500),
"OFF20_DSCR" VARCHAR2(200),
"OFF30_CD" VARCHAR2(500),
"OFF30_DSCR" VARCHAR2(200),
"OFF30_ID" NUMBER,
"UPDATE_DATE" DATE,
"CREATE_DATE" DATE,
"UPDATE_BY" VARCHAR2(250),
"OFFKEY_ID" NUMBER,
"CREATE_BY" VARCHAR2(250),
"OFFKEY_CD" VARCHAR2(500),
"OFFKEY_DSCR" VARCHAR2(200),
CONSTRAINT "OFFE_DIMENSION_KEY_PK" PRIMARY KEY ("DIMENSION_KEY")
My source table is
CREATE TABLE "R_OFF"
( "DIMENSION_KEY" NUMBER NOT NULL ENABLE,
"OFF10_DSCR" VARCHAR2(200),
"OFF10_CD" VARCHAR2(500),
"OFF20_CD" VARCHAR2(500),
"OFF20_DSCR" VARCHAR2(200),
"OFF30_CD" VARCHAR2(500),
"OFF30_DSCR" VARCHAR2(200),
"UPDATE_DATE" DATE,
"CREATE_DATE" DATE,
"UPDATE_BY" VARCHAR2(250),
"OFFKEY_ID" NUMBER,
"CREATE_BY" VARCHAR2(250),
"OFFKEY_CD" VARCHAR2(500),
"OFFKEY_DSCR" VARCHAR2(200),
Could you please let me know how to load the dimension via plsql.
Best Regards,
Sri

I assume you're quite sure that the relevant dimension does at least sometimes get updated by the build process, and that you've searched the outline just in case the member was added somewhere you didn't expect.
How is the data pulled in to the load rule? If it's from a relational database, check the SQL query used to extract it (could there be a WHERE clause restricting records)? If it's from a flat file, check the select / reject criteria set up in the load rule.
Another possibility is that your load rule is set up to skip X lines at the beginning, and the new member appears there.
You could build a brand new load rule against a test copy of the cube and confirm that ABC does build in successfully (that at least tells you that the problem is in your rule somewhere).

Problems Loading Programs

Hi, I'm having some problems loading programs, specifically the game Neverwinter Nights 2.
It has been working fine for a month or so. Now when I click to load, the icon jumps a few times then nothing.
- I have reinstalled the game, but with no success.
- I have tried to repair the disk permissions in Safe Boot mode.
- I have unsuccessfully searched for Plist files connected to the game (found none).
- I have tried to load the game via a New Login account, with no success.
Im Reluctant to do an 'Archive and Install', as I have no idea where have my app disks are.
Has anyone an other idea's? Loosing the ability to play the game is annoying but I'm more worried that this may happen to other more important applications in the future!
Any help or suggestions would be appreciated!
Thank You!
Specs are.
10.4.11
2.16 Intel Core Duo
2gb 667
ATI Radeon X1600

Don't even think about deleting Quicktime, it's an integrated part of the OS.
If that (or any other) game is that important to you, and you are prepared to lose the security fixes in QT 7.6, then it is possible to revert to an earlier version of Quicktime:
If you wish to downgrade Quicktime to 7.5.5, (even though you will lose the important security fixes contained in the 7.6 update, and you will also find that parts of iTunes 7.6, iMovie and iChat may not now work without QT 7.6) there are two methods for doing this (note that attempting to manually delete Quicktime from your hard disk is doomed to failure. QT has components all over the place as it is used by many applications):
(Note: I am running 10.4.11. Some things may be different in Leopard, but the principle should be the same.)
First: Go to HD/Library/Receipts and drag the file QuickTime750_Tiger.pkg to the trash, and delete it.
1. Perform an Archive and Install process to remove all of the QuickTime update's (and potentially problem-causing) components, and replace them with the components of the older release. Unfortunately, this means you will lose some system settings and some or all third-party system add-ons. This method is therefore longwinded and inconvenient, but will ultimately work. Because QT is an integral part of OS X using an archive and install to also downgrade to a previous version of OS X so that the various versions can work in the intended tandem, is the safest way to do it. But there is also another way:
2. Install Quicktime 7.5. in such a way that it overwrites the QT 7.6 files without interfering with your other system settings and third-party add-ons. This can be done using a shareware (you can use it a few times for free, but worth paying for and having) application called Pacifist. This method works perfectly:
(Note that there separate QT 7.7.5 installer packages for Leopard and Tiger , and you can get them here:
For Panther: http://www.apple.com/support/downloads/quicktime74forpanther.html
For Tiger: http://support.apple.com/downloads/QuickTime7_5_5_forTiger
For Leopard: http://support.apple.com/downloads/QuickTime7_5_5_forLeopard
Make sure you download the correct version for your system!
If you don't have it already, download Pacifist from:
http://www.charlessoft.com/
and install it.
Open Pacifist, and drag the icon of the QT installer to the Pacifist window. This will have the 'open carton' icon. Click on this, then click Install from the top left-hand corner of the Pacifist menu. You will be asked if you want existing files replaced. Say yes to all. Job done!
You will now have Quicktime 7.5.5.x installed.
N.B. Repair permissions and restart both before and after installation.

Load balancing via CHOC12/STS3

Hi, our customer has a connection between 2 x 12012 via the 4 embedded channels of CHOC12/STS3 module.As every subinterface has its own ip-subnet we have 4 equal paths to every destinations.
Customer wants to configure dCEF per-packet load balancing and is concerned if he can get packet sequence problems for his VoIP applications like it may happen on 'normal' equal path cost connections when load balancing per-packet instead of per-destination.
Does anybody know if this can be a concern on the embedded channels ?
Regards Guenther

Generally speaking, for a given source-destination pair, with Per-packet load balancing enabled, packets might take different paths which could introduce reordering of packets. Thus Per-packet load balancing is inappropriate for voice over IP traffic and also for certain other types of data traffic that require packets received to be in sequence. For more information please see
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca62c.html#3589. Whether the CHOC12/STS3 module has some special meachanism built in to take care of this is unknown to me. Per-packet load balancing via CEF is not supported on Engine 2 Gigabit Switch Router (GSR) line cards (LCs).

Problem loading metadata from ODI to HFM ( Error code: 0x80040154 [Class...

Hi Experts
I have an issue when I load metadata via ODI to HFM. I get this message:
Error code: 0x80040154 [Class not registered
com.hyperion.odi.common.ODIHAppException: Metadata load failed. Error code: 0x80040154 [Class not registered
After some search on the net I see that this is due to a patch which is already been installed(ODI 10.1.3.5.5). The HFMDriver.dll is renamed as HFMDriver32.dll and HFMDriver64.dll rename as HFMDriver.dll.
Patch 9377717: ORACLE DATA INTEGRATOR 10.1.3.6.0 PATCH
1. I have reversed the HFM application TestApp into target for ODI and everything seems fine in the operator
2. I have created a simple source flat file for the Account dimension
3. I have created an interface to the Account dim. and verified the mapping with no errors
4. The process stops when trying to Load the Metadata to HFM(Step 5 / of 7)
5. When I search the log I see the Error code: 0x80040154 [Class not registered]
Does anyone have any idea why the interface does not load the metadata?
Brs
Inge Andre
Edited by: 819836 on Apr 14, 2011 12:49 PM

This instructions given us by the support have fixed the problem on the first topic.
1. Unregister the adapter by opening the command prompt and changing the path to
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ RegSvcs.exe /u C:\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmAdapterCOMadmin\fdmAdapterCOMadmin.dll
and:
RegSvcs.exe /u C:\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5C\fdmFM11xG5C.dll
Please verify the correct path to the dll's before proceeding
2. Re-register the adapter using the 64 bit version of RegSvcs, C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\RegSvcs.exe <PathToDLL> i.e. ..\Hyperion\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5C\fdmFM11xG5C.dll
N.B. Do not re-register the ComAdmin.dll because that is not a 64 bit component.
4. Open the FDM workbench and configure the adapter by right clicking the adapter -> Configure and re-entering the username and password.
Regards.

Problem loading flash player...

I am running windows xp sp3 ....... I down loaded the flash player 10. 102. 64 . everything went as planned ...the only place I could find evidence that the player downloaded was by going in to the control panel and add or remove software feature. It showed that it loaded it...but showed no memory occupation. While in Control panel, I highlighted the new flash player entry. and it simply showed a link to adobe support. So, I am here trying to help solve by providing my input.
I logged on as System admin, killed the virus software processes, and downloaded it all again after having removed the previous version. Same Results
I have taken several approaches with no success...each time going into the control panel and noting the entry of the flash player 10 with no mem. size being their. I then uninstalled the thing using adobes DLM...it does say that it is installed and done...also it does remove the entry when uninstalling.
I updated my java script .....once again the same results....right now ...my computer says that the flash player is loaded no memeory occupied (via control panel) but the only thing is a link to adobe....so, has any body had this experience.

Thanks, I will revist the forum and look up the threads, I need all the help I can get, You have a great Christmas.
I too will do without streaming videos , until after the Lords bithday has been celebrated.
========================================================
Date: Thu, 23 Dec 2010 15:59:47 -0700
From: [email protected]
To: [email protected]
Subject: problem loading flash player...
Hi, The Flash Player is a browser plugin, not a standalone player. There will be no size or any info in Control Panel/Add/Remove/Programs & Features.
Check a couple of recent threads or click on my name to several threads I have posted on helping users with the same issue.
Company coming in for the Christmas weekend and my time right now is limited.
On those threads you'll see the info you need.
Hope that helps,
eidnolb
>

Problem loading XML in firefox

I have stumbled across a problem when loading XML via an
external address in Firefox.
If you specify a valid port like '
http://www.mydomain.com:80/test.xml'
in the path for XML.load(), then it will not work when viewing the
Flash in Firefox ,but It works correctly in IE and also in both
browsers when viewing the page locally (rather than from a server).
please help me to solve this problem
Thanks,
shanthi.

HI Micke,
What is the code you are using to load the XML file ?
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Problem loading an email from message list

When I click to open an email from the list (Inbox, Sent, etc.), I get: "There appears to be a problem loading the email "xxx". Retry". When I click on Retry, I get: "An unexpected problem has occurred. Performing your action again in a few moments will probably solve the problem. If it persists, we suggest you close this window and re-launch Yahoo! Mail." It does persist, but re-launching does not help. Please help me. Thanks.

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

Problem Loading Large XML Doc

I'm running 10.2.0.3 on a Linux box and I'm having problems loading a large XML document (about 100 MB). In the past, I would simply load the XML file into a XMLType column like this:
INSERT INTO foo VALUES (XMLType(bfilename('XMLDIR', 'test.xml'). nls_charset_id('AL32UTF8')));
But when I try this with a large file, it runs for 10 minutes and then returns an ORA-03113. I'm assuming the file is just too large for this technique. I spoke to Mark Drake when I was at OpenWorld and he suggested I use Oracle XML DB, so I created and registered a schema and tried using sqlldr to load the doc, but it ran for 2 1/2 hours before returning:
Parse Error on row 1 in table FOO
OCI-31038: Invalid integer value: "129"
I tried simplifying both the XML file and schema to just the following:
<schedules>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="19672"/>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="15387"/>
<s s="2009-09-21T04:00:00" d="25200" p="335975" c="5256"/>
<s s="2009-09-21T04:00:00" d="86400" p="335975" c="26198">
<k id="5" v="2009-09-21 09:00:00.000"/>
<k id="6" v="2009-09-22 03:59:59.000"/>
<k id="26" v="0.00"/><k id="27" v="US"/>
</s>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="11678"/>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="26697"/>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="25343"/>
<s s="2009-09-21T04:00:00" d="21600" p="335975" c="25269"/>
<s s="2009-09-21T04:00:00" d="86400" p="335975" c="26200">
<k id="5" v="2009-09-21 09:00:00.000"/>
<k id="6" v="2009-09-22 03:59:59.000"/>
<k id="26" v="0.00"/><k id="27" v="US"/>
</s>
</schedules>
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
     xmlns:xdb="http://xmlns.oracle.com/xdb"
    version="1.0"
    xdb:storeVarrayAsTable="true">
     <xs:element name="schedules" xdb:defaultTable="SCHEDULES">
          <xs:complexType xdb:SQLType="SCHEDULES_T">
               <xs:sequence>
                    <xs:element ref="s" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="s">
          <xs:complexType>
               <xs:choice minOccurs="0">
                    <xs:element ref="f" maxOccurs="unbounded"/>
                    <xs:element ref="k" maxOccurs="unbounded"/>
               </xs:choice>
               <xs:attribute name="s" use="required" type="xs:dateTime"/>
               <xs:attribute name="p" use="required" type="xs:int"/>
               <xs:attribute name="d" use="required" type="xs:int"/>
               <xs:attribute name="c" use="required" type="xs:short"/>
          </xs:complexType>
     </xs:element>
     <xs:element name="k">
          <xs:complexType>
               <xs:attribute name="v" use="required" type="xs:string"/>
               <xs:attribute name="id" use="required" type="xs:byte"/>
          </xs:complexType>
     </xs:element>
     <xs:element name="f">
          <xs:complexType>
               <xs:attribute name="id" use="required" type="xs:byte"/>
          </xs:complexType>
     </xs:element>
</xs:schema>
Keep in mind both the actual XML file and corresponding XSD is much more complex, but this particular section is about 70 MB so I wanted to see if I could just load that. I used the following sqlldr script:
LOAD DATA
INFILE *
INTO TABLE schedules_tmp TRUNCATE
XMLType(xml_doc)(
     lobfn FILLER CHAR TERMINATED by ',',
     xml_doc LOBFILE(lobfn) TERMINATED BY EOF
BEGINDATA
/tmp/schedules.xmlThis worked fine on a small doc - loaded correctly and I could query it fine - but when I tried using the 70 MB file it ran for a couple of hours before dying with a memory problem.
So what am I doing wrong? Is there a better way to load a large file?
Thanks for the help.
Pete
Edited by: mdrake on Nov 9, 2009 8:46 PM

Mark:
Answers to your questions:
Do you use direct load ? -> Yes. I tried again using UNRECOVERABLE LOAD DATA to try to speed up performance, but it still ran for a couple of hours before dying.
Which DB Release are you working with ? -> 10.2.0.3
Can you see if you can upload via FTP ? -> I added noNamespaceSchemaLocation to my XML file and ftp'd it to my XML directory, but it wasn't recognized. Is there something else I have to do?
The change for unsignedInt should have code rid of the issue with the value 129. Did it ? -> I didn't try it again on the whole XML file (I'm just working with the schedules section), so I haven't verified this.
I'm still stumped as to why sqlldr takes so long. I could write something to parse the XML file into a flat file and then use sqlldr to load it into a relational table, and the load would only take a few minutes. But then I wouldn't be using XML DB which I thought would be faster. What am I doing wrong?
Pete

I receive the "problem loading page" error message many times daily

I frequently receive the error message "problem loading page." "Server not found... Firefox can't find the server at www.whatever.com" shows up in the window and I click the "Try Again" button. Sometimes I have to click the Try Again button several times to connect to the desired website.
What should I look at to solve this problem on my 3 office computers connected via cable to an older neatgear router?

You can check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Problem loading Stocks Via LSMW

Similar Messages

Maybe you are looking for