Problem of nested windows in SRM EBP 5.0
Hi All,
We are working on SRM EBP 5.0 where user can create a shopping cart and submit it .
Below mentioned is the scenario which creates the issue..
1)User is at step 1 ie Select Goods/Services .
Thers one roadmap on top of the screen .
2)User selects a material and add it to shopping cart .For this an OCI BSP application is used which is called using Integrated Structure ie. it opens in the same window .
Now within the subwindow(say subscreen1) in which the BSP application opened , thers one more Road Map , with Step 1 (Select Goods/Services) as hyperlink.
So there are total two roadmaps on screen one at top and other in subscreen1
3)Now if user clicks the Select Goods/Service link of the inner roadmap one more subscreen (subscreen2) opens within Subscreen1 .
N number of nested subscreens can be created this way..
How can we stop this?
On the other hand if we use the standard call structure , a new child window is opened for the BSP application and after adding material to shopping cart thers only one roadmap , but we cannot use standard call structure .
Hope my issue is clear .
Has anyone encountered this?
Regards,
Anubhav
Hello ,
Check wether the entries are maintained in the table TWPURLSVR.
Cheers,
Sid
Similar Messages
-
Problem of nested windows in ITS application of SRM EBP 5.0
Hi All,
We are working on SRM EBP 5.0 where user can create a shopping cart and submit it .
Below mentioned is the scenario which creates the issue..
1)User is at step 1 ie Select Goods/Services .
Thers one roadmap on top of the screen .
2)User selects a material and add it to shopping cart .For this an OCI BSP application is used which is called using Integrated Structure ie. it opens in the same window .
Now within the subwindow(say subscreen1) in which the BSP application opened , thers one more Road Map , with Step 1 (Select Goods/Services) as hyperlink.
So there are total two roadmaps on screen one at top and other in subscreen1
3)Now if user clicks the Select Goods/Service link of the inner roadmap one more subscreen (subscreen2) opens within Subscreen1 .
N number of nested subscreens can be created this way..
How can we stop this?
On the other hand if we use the standard call structure , a new child window is opened for the BSP application and after adding material to shopping cart thers only one roadmap , but we cannot use standard call structure .
Hope my issue is clear.
Regards,
Anubhavno answers...
-
Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. GermainGlen,
Thank you for the prompt reply.
We have already done what you suggested (My explanation was not very
clear ... sorry) to no avail.
Any more takers and/or ideas anyone?
Thanks,
Sean
-----Original Message-----
From: Glen A. Whitbeck [SMTP:[email protected]]
Sent: Monday, January 26, 1998 2:47 PM
To: GERMAIN Sean
Cc: 'Forte Users Group'
Subject: Re: Nested Window Problem
You may need to dynamically tell the child window what its parent is (such
as a named grid that exists on the parent window). Setting the child
window to size to its parent should work once the child window knows who
its parent is. You should be able to put your window into that grid at
specified row and column coordinates. To reset the parent and position a
widget in a grid, you do something like the following:
<Widget>.Parent = NIL;
<Widget>.Row = 1;
<Widget>.Column = 1;
<Widget>.Parent = <TargetGrid>;
I believe that you should be able to do the same thing for a window, too
(using "Self.Window" instead of "<Widget>").
Glen
GERMAIN Sean wrote:
Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. Germain<< File: vcard.vcf >> -
Every time I open up Firefox it appears to open two nested and linked windows, each with their own minimize, maximize and close buttons but the both work the same. The homepage does not come up, the back and forth buttons do not work. Both the refresh button and F5 do not work. The Bookmark Toolbar does not show up until I disable it in View and then re-enable it and this causes the outer nested window to disappear or close.
This issue can be caused by an extension or theme that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS
Hi Masters of SRM.
could you please show how make the configuration in XI into Builder configurations
the scenario is SRM/ebp -
> XI -
> SRM/SUS
any guide because I have the guide for the ERP----> XI -
>SUS. but does not my requirement.
the both systems are in same box but different client.
thanks for yours atentionsThanks: Nichil.
I follow your instructions., when I make simulation in Generation Log. show all lights in yellow color for example:
Receiver Determination(s):
| SRD_009 | PurchaseOrderRequest_Out | * | *
Analysis
Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
Results
The reused receiver determination is already assigned to the configuration scenario
Notes
Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
I am message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
but no show an error or problems only stay in Recorded Status , othe observation into the SXMB_MONI the fiel Receiver component and Receiver Interface are empty,
what you suggets ?
best regards. -
Hi ,
Can you please tell where can i<b> get material document for SRM EBP WORKFLOW .</b>
thanks in advance,
Regards,
Kannan.Pls. Go to following links
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
http://help.sap.com/saphelp_srm30/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
https://websmp104.sap-ag.de/ibc
Path :- Integrated Business Content> .... for mySAP SRM> Self-Service Procurement> Page 70
Re: Work Flow error - Shopping cart
Workflow problem
regards
Sanjay -
IDOC problem during goods confirmation in SRM
Hi guys,
I am facing some problem during goods confirmation in SRM.I am getting an error relate to IDOCs.i have setup the desired message and partner ID for goods confirmation in SRm but the IDOC gets stuck with the code 30 and the idicator is yellow.But when i manually reproces trhe IDOC after that it works fine.I dont want to process it manually.Can anyone help me out with the possible source of problem.
Regards,
Pawan.Hi
Which SRM version are you using ?
<b>Please see related links -></b>
Note 549846 - FAQ: Goods receipt confirmation EBP
Note 847250 - IDoc error remains in alert monitor although IDoc is ok
<u>Othere related OSS Notes -></u>
Note 1049536 Incorrect reference doc year when deleting goods receipt
Note 683848 Problems with delivery note number with upper/lower case
Note 747422 Replace internal units with ISO codes - modification
Note 545657 Error in ERS procedure in back end: Delivery note missing
Note 338985 BBPCF & IV: incorrect IDocs in backend system
Note 561881 Posting of returns for partial confirmation not possible
Note 550884 Check of return delivery and reversal against back end
Note 514669 Goods receipt cannot be posted
Note 502869 Return delivery possible despite posted return delivery
Note 430153 Classic scenario: Goods receipt/issue slip, bill of lading
Note 360833 "Purchase order & is being processed", IDoc error
Note 388601 Follow-up processing for GR/SE confirmation is not possible
<u>Do let me know.</u>
Regards
- Atul -
Firefox start with nested window after update up to v.25.0
When I start Windows Firefox starts with nested window interface. If I close and run it again firefox starts fine.
http://easycaptures.com/fs/uploaded/809/5563680305.pngTry to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
Automatic PO creation - only for PRs based on catalog SRM/EBP items
Dear Experts,
i am facing the following question w.r.t. automatic PO creation:
Is it possible to have automatic PO creation in R/3 only for those purchase requisition items, that are based on shopping cart/EBP/SRM items that are from a third party punch out catalog?
The idea is, that the requisitioner on the SRM EBP side shops in a catalog. Once the the SC is approved and the purchase requisition is created in the R/3 system, automatically a PO should be created based on that PReq. This would save the time for the buyer, who do not need to pay attention to this document, because the purchase from the catalog guarantees the buyer, that the already pre-agreed conditions are getting applied.
But PReqs that are based on Free Text shopping cart EBP items must not be taken into account for the automatic PO creation.
Is there a way to distinguish between the catalog-based and the non-catalog based PReq positions?
Thank you.Auto PO transaction ME59N comes with huge selection crieteria. If you can distinguish between catelog vs non catalog requisition then it very easy to set up variant to filter non catalog based requistion. you can also think about ehnacement of polulating text fields like Requisitioner or Requirement tracking number with unque idetifier in case of non catalog based PR then you can set variant to filter out those requistions..
-
A lot of problems after installing Windows XP using Boot Camp on a Mac Book
I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight---I'm moving this topic to the Boot Camp forums.
-Twilight -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
I purchased in in-app component for an email program but it has not shown up in the app on my ipad. I tried to report a problem, but no window opens in which to explain my situation. How do I get a message to the seller or to itunes? I am reluctant to re-purchase the component.
Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/
Maybe you are looking for
-
Purchased ıpd 2 but cannot connect it to apple tv via airplay
purchased ipad2 but couldnt connect it to apple tv via airplay, cant see the icon
-
I upgraded operating systems and now I can't find my photos in iPhoto. There are only random photos, but I can't find all the other albums I had. Where are they?
-
Insert graphics in smartform from URL
Hi, In a particular scenario i am trying to insert graphics in the smartform from the URL. Is it possible? If Yes, pl. let me know the steps. I know how to use graphics from the SE78 transaction, but not from URL
-
Most programs including Firefox have a menu bar. This seems to have gone in FF4. How do I get it back, or do I go back to FF3.x
-
After reformatting i do not see iphoto
after reformatting i do not see iPhoto app