Problem posting items to webblog
I have been able to post items with lifeblog to my (typepad) account for about 3 weeks. Then, from one moment on another, I am unable to post items. I didn't change any webblog properties (double checked it hundred times).
Any ideas?
Kind regards
Rob Zoeteweij
thats unusual, if something like that is happening then you could assume two scenarios:
1) the blog service has fallen over in some way, so the phone is waiting for a response from the site but isnt getting any so it sits there forever...
or
2) the application on the phone has broken in some way, the only way to see if that is the issue is to either reinstall the app if it is third party, or reset the phone if it is built in.
mind and take a backup of everything if you want to try restting the phone.
At least you know its not a connection issue, would be good if you could try updating your blog from another device to see if it is the site itself causing the issue.
Similar Messages
-
Problem posting items to lifeblog - N95
I have been able to post items with lifeblog to my (typepad) account for about 3 weeks. Then, from one moment on another, I am unable to post items. I didn't change any webblog properties (double checked it hundred times).
Any ideas?
Kind regards
Rob Zoeteweijthats unusual, if something like that is happening then you could assume two scenarios:
1) the blog service has fallen over in some way, so the phone is waiting for a response from the site but isnt getting any so it sits there forever...
or
2) the application on the phone has broken in some way, the only way to see if that is the issue is to either reinstall the app if it is third party, or reset the phone if it is built in.
mind and take a backup of everything if you want to try restting the phone.
At least you know its not a connection issue, would be good if you could try updating your blog from another device to see if it is the site itself causing the issue. -
hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help me out
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Problem Posting an Event to the EventQueue
Hi all,
while i develop a java application i get problem posting ana event to the EventQueue using postEvent method.Here is the problem.i have a menu which have 3 menu items (Load, store, hide).i want when the user click "hide" the code in "store" option excuted plus extra code in option "hide".i tried to implement this using the postEvent of EventQueue. i simlate this by tring to post ActionEvent to simulate user cliks option "store" but this didn't work. can anyone tell me what's the problem.thankstry JMenuItem's doClick(). that simulates the user clicking on your menu item.
thomas -
Hello,
I am running an advanced tutorial: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/issue_track_ui.htm#BGBJCGIC
and I have a problem with item Validation.
Tutorial offers the following:
You must manually create another validation to ensure that the Actual End Date is the same or later then the Start Date.
To add a validation for the Actual End Date:
1.Under Page Processing, Validations, click the Create icon.
2.For Level, accept the default, Item level validation, and click Next.
3.For Item, select Project Details: 50.P3_ACTUAL_END_DATE (Actual End Date) and click Next.
4.For Validation Method:
a.Select PL/SQL and click Next.
b.Accept the default, PL/SQL Expression and click Next.
5.For Sequence and Name:
a.Sequence - Enter 50.
b.Validation Name - Enter P3_END_AFTER_START.
c.Accept the remaining defaults and click Next.
6.For Validation:
a.Validation - Enter:
to_date(:P3_ACTUAL_END_DATE,:APP_DATE_FORMAT) >= to_date
(:P3_START_DATE,:APP_DATE_FORMAT)
b.Error Message - Enter:
Actual End Date must be same or after Start Date.
c.Click Next.
7.For Conditions:
a.Condition Type - Select Value of Item in Expression 1 is NOT NULL
b.Expression 1 - Enter P3_ACTUAL_END_DATE
8.Click Create.
Is there a mistake in explanation? I did it 3 times already, very carefully! I ran the page, entered the date, which is After the Start date, and get the error message: Actual End Date must be same or After Start Date!!
Thank you for your consideration...I got it solved. I don't know if this is documented(or a bug) but what I did was declare an exception and then raise it and put the form_trigger_failure into the exception handler rather than raise form_trigger_failure in the body.
declare
alreadyExists exception;
begin
-- select .....
raise alreadyExists;
exception
when alreadyExists then
message('.....exists');
raise form_trigger_failure
end; -
Total weight of a post item in purchase order message
Hello !
I want to write in the sapscript form used to edit the purchase order the total weight of a post item.
I found in the table EKPO the net weight, but iti is the weight of one article and not of the whole post item.
Does someone know how I can get this information (in which table or structure that is filled the MAIN element of the form) ?
I could multiply this weight by the ordered quantity but it seems not to be possible directly in the form and I want to use the standard program for my sapscript.
I precise that my form is an copy of the standard form MEDRUCK.
I thank you a lot for your help.
Regards,
Céline J.Any idea ?
-
Public Sector Records Management Incoming Post Items
My task is to create Incoming Post Items from SAP-Office Emails and automatically assign them to records.
Now I'm at the point to automatically assign the Incoming Post Items to records. I need access to the content of the Post Items for automatic assignment. Properties are accessed by using function module. But how can I get the content of the Incoming Post Items?Hi virgilo,
Thanks for your reply,
i have check for the transaction, it took me to my inbox, but i can send mail only to internal or external user or some business object etc... but
Actually my doubt is i have a mail in my inbox, but the mail should come to my Electronic desk(SCASE -PS) as an incoming post item under the workbasket.
How can i achieve this. can you please explain me the steps involved in creating(customizing) the incmoing post items.
Also please tell me where is the 4 level process route useful.
Thanks in advance,
Kavitha -
I am a graduate student and have problems posting to my schools discussion board "blackboard". Any suggestions?
Download the Blackboard for mobile app for the iPad.
-> http://itunes.apple.com/us/app/blackboard-mobile-learn/id364252826?mt=8 -
Log Entries not sorted in Problem work items
We have noticed that the Log Entries in all Problem work items appear to be randomly sorted. You can manually sort them by clicking on the column headers.
Log entries for Service Request and Incident work items are sorted by Created date as default which I guess is how most people would want them. Has anyone else noticed this or can this be configured locally somehow?
ThanksHi,
I checked my lab, and saw that only incident's log entries is sorted by date:
Log entries for SR and Problem are not sorted:
And this is hard-coded, if you want to sort them by date, we should click Date Time.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Activate WF for incoming post item Records Management
Hi.
Could anyone tell me the steps to activate Workflow for incoming post item (Records Managemet).
I'm traying with this Standard Task
TS78800015
TS78800013
Regardshi Virgilo,
WF activation has two main steps for initial setup:
go to swu3 & use the automatic workflow generation to do the initial setup of workflow in system
u will need to ensure that the mail traffic to & fro works from the system. This is also one of the setting in SWU3.
Once this is done, u shud be able to see the mails arriving in r/3 inbox, in scaseps inbox plugin.
Further customizing like automatic workflow for processors etc can be found in RMPS_CUSTOMIZING.
thanks & regards,
Pragya -
Records Management - Incoming Post Item
Hai,
How can we capture the mail to workbasket in PSRM as incoming post item.
Regards,
KeerthikaI don't know any WF to atach mail into record, however you can use BAPI
First with FM capture documents and then use BAPI_RECORD_ADDELEMENT.
Regards. -
How do you do post item validations or calculations?
In Oracle Forms, you can use Post Item triggers or When Validate Item triggers to validate data or do calculations as you move out of a form field. How can I do the same in Apex?
In Forms you can run PL/SQL code on both the client and the server, and the client trigger code can seamlessly access server PL/SQL program units and the state of the database session through its dedicated, always-on connection. With APEX things are different. The client (browser) only runs JavaScript and the server only runs PL/SQL; their session states are entirely separate; and they can only communicate through transient, stateless HTTP requests.
In this case, your dynamic action code has executed, but as it's PL/SQL it executes on the server and only affects server session state. (You can check this by reviewing session state—if the session state reflects no change, ensure the Page Items to Submit dynamic action setting includes <tt>P36_AMTRQ</tt>.)
If you require the action to execute in the browser then it needs to execute JavaScript code:
var amt = parseFloat($v("P36_AMTRQ")) * .0025;
$s("P36_FFEDU", amt);
$s("P36_CFEDU", amt);Page events, JavaScript and server PL/SQL programming can be combined using AJAX techniques to run code in the database and return the results to the page without page submission and rendering. htmldb_Get() Documentation vs Real Life. -
Hey Verizon / HTC / Google Please fix the caller ID problem, post 2.2 Froyo UPDATE. This is a major Problem.
I have provided some steps below that may help with the Caller Id issue you are experiencing.
Try completing a soft reset on the device. A soft reset would be powering the device off and pulling out the battery. Once the battery is removed, place it back in and power the device back on.
Dial *228 and send. Once dialed, listen for the recording to prompt you for option 1 and select option 1. The phone should complete its programming within a minute.
Ensure you are using the area-code and 7 digit number format (ex. 9999951212)
Try removing the contact and re-adding it. -
Hi fellows, i'm a beginner in SAP-FI and am having problems posting documents.
The error says:
<b>System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder TAX2</b>
any suggestions??Hi,
can you explain a little bit clear....what kind og postings are you handling and where are you getting problem ...
regards,
vinay -
Hello there. Im having problems purchasing items in a game I just downloaded, I managed to top up the game before w/ my credit card, however something has happened and this is no longer possible. The tricky part is that Purchases at itunes are normal, since I just bought a tune...Please help
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Macbook pro mid 2011 battery lasting only 3 hours
How can I get my brand new Macbook pro mid 2011 battery to last longer, now it's lasting only 3 hours.
-
I want to transfer all my contact and calendar info from my iphone 4s to my home computer (not a mac). My home computer currently doesn't have this info on it.
-
Bootcamp Windows 7 Blue Screen of Death on MBPwR
Hello all, I've never needed to use this before but gosh darn it I need some advice, because I can't figure this out... I'd rate myself a 9 out of 10 in "Windows PC" experience And maybe a 6 out of 10 with Macs, I'm still new! I just bought the new M
-
I scanned document to acrobat 9 standard and I can not see it to review.
I scanned a document to acrobat 9 sandard. When I went to review it the pages were grey and I could not see what I had scanned in. What could I have done wrong? Or, is a setting on acrobat set wrong from prior use ( I recently reinstalled due to a vi
-
IE 9 incorrectly encoding Unicode characters in URIs to ISO-8859-1 instead of UTF8
Lets take the example word präsentation In Firefox, if I specify that as a CGI parameter, on the receiving end, I recieve: pr\\303\\244sentation which decoded as UTF-8 gives me: pr{U+00E4}sentation or my submitted word präsentation. What does IE give