Problem printing in Ical

hello, hoping i could find some help here. i am trying to print a month of my ical but i am getting the same problem. i want the event to list the title, but not have them next to it.
i want the 9am out of the picture, but i cant seem to find a way to do so, can anyone help?
Message was edited by: acrahm

my problem is that all i get when i print is a line without the time next to it. how do you get the times to show up?

Similar Messages

ICal Problem, everyday in iCal is monday

Hey guys
i have a problem in apple's iCal since i use Snow Leopard on my MacBook. I have a iMac and it run's with Leopard (iCal works on my iMac without any problem).
My problem is that iCal shows me everyday in the weekview as Monday. I tried already to change the days per week from 7 to 5 without any effect so back to 7 days per week. I also tried to change the start of week from Monday to Sunday but also this without any effect
iCal shows me the days of week in the monthview without problems but in the weekview i got always Monday.
have any one of you an idea?
what i notice is that i got the whole week (Money - Sunday) when i print that calender.
I NEED HELP please

Freeza1two,
Welcome to Apple Discussions.
Open System Preferences...>Language & Text>Formats>Region: and select/re-select the appropriate Region.
;~)

Printing with iCal

I'm having trouble printing iCal pages. The printer only prints about an 1/8 of an inch of the left side of the calender. I've had some problems printing out some PDFs a while ago, they did something similar. Everything else prints fine.
Is it glitch in my printer, or iCal.
Dual 1.8Ghz G5 Mac OS X (10.4.6) HP psc 2110 printer

I have exactly the same problem with my HP printer which works fine with everything else. The print preview pane shows the correct object but still only a fraction of it comes out on the page. Looks like a printer problem.
iMac intel core duo Mac OS X (10.4.5) hp psc 2115

Problem printing from Safari to hp printer

I have been having trouble printing documents such as fedex shipping forms and epicurious recipes from safari to my hp officejet 6110. For example, a one-page document will kick out a blank page or two, then print the upper one-third of the document then kick out another blank page. This only happens with Safari. I am not having any other printing issues with other programs. Any Ideas?

Buckeyefan
I had the same problem printing to my HP 6110 All-In-One from Safari and, in addition, printing from iCal. The problem may have also been present in other OS X Tiger programs; I just may not have been aware of it. I was not, however, having printing problems with non-Tiger apps, ie. MS Office, Adobe, Quicken, etc. Following the steps outlined at the HP link below fixed my problem. Hope it helps.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=79477&dlc=en〈=en
JagsFan
PowerPC G4 Mac OS X (10.4.7)
PowerPC G4 Mac OS X (10.4.7)

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

GACU,
OK, now I think I understand your problem.
If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

How can I print from iCal on iPhone and iPad?

HHow can I print from iCal on iPhone and iPad?

Hi EScott,
This is an easy fix. You indicate that you get these emails just fine on your desktop, so they are not getting lost. They are just not making it to your iPhone or iPad. This tells me that you need to change the preferences of the accounts on your desktop machine. Each account will have a setting for what to do with mail on the server after you have checked it. The choices are to leave on the server, or to delete it.
If you have it set to delete, it won't be there when you later go check your mail from your mobile device. Most of the people I see post here with email issues have the opposite problem from you. They check their email from the phone during the day, then can't get it on the desktop later. It sounds like your iPhone and iPad are already set to leave on server.
All you have to do is go into your mail client on the desktop and in the individual preferences for each account change this setting. You may also want to check how you have deleted mail set up. It also can be set to be removed immediately, at a later time (like a week, month), or never. If you have it set to delete it won't be in your trash folder.
Good luck.

Problem printing my time range

I'm trying to print my iCal weekly view for the range of 10am to 8pm, but when I print it prints the whole day (12am to 10pm!). In the prefs I have "day starts" and "day ends" to the proper times. And if I set view to "Day" it prints the right range. Any reason it would be doing this, or does anyone know of a workaround so I can print just the time range I want?
Thanks,
Tony
Power Mac G5 Mac OS X (10.4.9)

I don't see any problems with your permissions.. it is showing read and write for everyone.
But the TC trash works differently.. and can cause issues.. all of this is the reason you should not be using the TC as a NAS..
See E6 here about emptying trash..
http://pondini.org/TM/Troubleshooting.html
Also your TC name is too long.
See C9 for why you should keep you name shorter..
In fact under Mavericks.. I would stick to SMB standard .. 2-20 characters.. less than 10 even better.
No spaces
Pure alphanumeric.
Much pain when Mavericks is involved.
Pondini also has some instructions on better way to use the TC if you do want to mix data and TM backups.
Q3 here.
http://pondini.org/TM/Time_Capsule.html
Remember also if you move this data to the TC it cannot be backed up by Time Machine in the computer.. and you will have no backup of your files.

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Problem printing out to a parallelport printer

Hello, I am using the javax.comm.*; package and I am having problems
printing to the parallelport.
Well, it prints out the string but the problem is that the light for paper feed
starts blinking eventhough there is paper , once I click the paper feed button
the printer then prints out the string.
So, basically, everything is ok, apart from that I have to press the paper feed
button for each time I want to print something.
There is an error in my code somewhere, but as I am new to port communications I cannot understand what to do.
Below is my code, please help.
Thanks!
public void print(String s){
Enumeration ports;
CommPortIdentifier portId;
     try{
          portId = CommPortIdentifier.getPortIdentifier("LPT1");
         addPort(portId,s);
     }catch (NoSuchPortException e){
                 e.printStackTrace();
public static void addPort(CommPortIdentifier portId,String s){
     try{
          ParallelPort port = (ParallelPort)portId.open("LPT1",2000);
        /*port.notifyOnError(true);
        port.notifyOnBuffer(true);
        port.addEventListener(new ParallelPortEventListener(){
               public void parallelEvent(ParallelPortEvent ppe){
                       System.out.println(ppe.toString());
                       System.out.println("An event has occured");
          try{
               OutputStream os = port.getOutputStream();
               if(os == null){
                    System.out.println("Os is null");
               else{
                      os.write(s.getBytes());
               //os.flush();
          catch(Exception eis){
               eis.printStackTrace();
          port.close();
     catch(PortInUseException e){
          System.out.println(e.currentOwner);
          e.printStackTrace();
     catch(Exception ecl){
          ecl.printStackTrace();
}Of course this class imports :
import java.util.Enumeration;
import javax.comm.*;
import javax.comm.CommPort;
import javax.comm.CommPortIdentifier;
import javax.comm.ParallelPort;
import javax.comm.NoSuchPortException;
import javax.comm.PortInUseException;
import java.io.*;

Wow - I wonder how the OP thought that the
Developers Home > Developer Forums > Java Forums >
Java Mobility Forums > Consumer and Commerce >Consumer and Commerce General >
Forum was a correct choice for this problem??It's the same logic that leads one to believe that being new to port communications omits them from the responsibility of using general troubleshooting techniques to isolate/identify a problem.
This logic often leads to obscure questions also, sadly.

Possible solution for problems printing with ICC profiles - esp. R2400

(N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
sips -s renderingIntent perceptual
Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
Thomas
Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz Mac OS X (10.4.10)

Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian

How do I print my iCal (Mountain Lion 10.8.5) in 5x7 format?

How do I print my iCal (Mountain Lion 10.8.5) in a 5x7 format? 5x7 is not listed as an option in the print menu.

For custom print sizes, see the software called Clickbooks: http://www.bluesquirrel.com/products/cbmac/
I would ask them if what you want is possible before purchasing. A customer of mine got it to make many other custom formatted pages. Don't have them anymore, but they I'm sure could tell you if it is possible. Be sure to also indicate your printer model.

Problem printing Report with Image in BI Publisher 11g

I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PM

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

Having problem printing to hp officejet pro 8500 since updated to yosemite. any help please?

I am having problem printing to Hp Officejet pro 8500 printer, it says it is in use. I never had any problem until Yosemite update. Any ideas please?

I had the same problem with a HP 4000 laser jet & SL, this is how I solved it
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
Etow

Welcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems Printing to HP 2610 All-in-one

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

Problem printing in Ical

Similar Messages

Maybe you are looking for