Problem regarding request not coming to the cube,

Hello,
I created infocube then in source of transformation , select object type( data source) and specifed the name and source system u2022 Activate created transformation u2022 Create Data transfer process (DTP) by right clicking the master data attributes u2022 In extraction tab I specified extraction mode ( full) u2022 In update tab I specified error handling (requestgreen).I activated DTP and executed tab click execute button to load data in data targets.
Then I right clicked data targets and selected manage and in contents tab select contents to view the loaded data. But the duplicate records were there.So i deletd the requets from cube and again ran the infopackage but the request didn't come again.
So please tell me what to do in this point of time to bring the request again into the cube and get the selected contents.
Thanks
JINI

This is a known issue and the workaround is to do ctrl+alt+bksp+bksp(kill session) or disable USB redirection for that pool
if you are not using USB-R.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer

Similar Messages

Problem of DTU not coming to the VDI Screen after the VM is rebooted

Hi All,
In my POC Setup, there is a strange issue that I am facing: Upon rebooting the VM image, the DTU does not return back to the VDI Login Screen.
Can somebody help me troubleshoot this issue?
Regards,
Rajveer

This is a known issue and the workaround is to do ctrl+alt+bksp+bksp(kill session) or disable USB redirection for that pool
if you are not using USB-R.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer

Data from one cube is not coming in the multiprovider

Hi,
I have two cubes with a common characterstic.
I created multiprovider above these two cubes. But data is not coming from the cube 2. The values from cube 2 are showing as 0.
Can anyone help me out in this?

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Problem in the main area of the table not coming on the same page

Hi Experts,
I have created a invoice in the table header with descriptions and main area with the values,below main area i have also created a template in smartform for calculation when i have assigned this to a transaction and i goto printpreview my main area and the calculation template are not coming in the same page,and the calculation and the header template goes to next page without main area,even if i decrease the size of main window my problem does not get solved.Is there any way out.
Please Help
Regards

Hi Summet ,
Just check in the form where your writing the code if theer are any new lines before your calculation template .
It happens that may be the form you write is unabl;e to accomadate your window size .
Try this!
Hope it helps!
Much Regards ,
Amuktha .

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Web Analysis report is not coming with the border/logo/heading while print

Hi All,
I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
So please suggest us with a resolution to have border, logo and heading, while using Print all object.
Thanks with regards....
Rao

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

TS2446 Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

What happens when you try to buy something ?
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it's a different problem ... ?

What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Data not validating in the cube

We have upgrade the quality box to BI 7.0 recently as part of the testing we found that data is not consistent.The quality box is a copy of the production box and thereafter the quality box was upgraded to BI 7.0. The no of requsts in that specific cube which I say data is not consistent has the same number and same requests between QA & prod,but I found that in one of the data requests the data is different between QA & prod.
This data request should be the same bcoz it is just copied from the prod it has the same requestno/no of added records,but the data looks to be diffrent inside the request.
Pl let me know if anyone encountered the same problem during the upgrade and how to resolve this.
Thank you

Hi Kumar,
1. are you sure no selective deletions were done on the cube?
2. is the data still different if you check the data via a query?
I'm mentioning this because we sometimes see very strange results when using LISTCUBE (wrong figures!).
When using a query, the correct data are displayed.

UDF Value is not coming in the query report

Hi all,
i have designed query report based on AR Invoice which has some UDF .
all udf have FMS applied and all these udf has values.
when i run report some times udf values are coming in the report and somtimes not even if udf contains values.
if i open perticular invoice and again update that udf and again run report now udf value will come in the report.
every time i need to manualy update the udf even if that udf contain value.
how to avoide this problem.
Pls suggest solution.
Regards,
Chetan

Hi Chetan,
Try this,
-> Open the require document(module).
Assign this procedure and then ADD the document
and Run the Query Report.
1. Goto the UDF and Click (ShiftAltF2).
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query in UDF.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the Auto Refresh Field (for example CardCode (or) Remarks).
6. Check the Display Saved Values.
OR
-> Open the require document(module).
1. Goto the UDF and Click (ShiftAltF2).
2. When will you add the document at that time
you can Click the SHIFT + F2 and than ADD the document.
and than Run the Query Report.
Regards,
Madhan.

Trouble with Meeting Requests not coming through - GMail to Exchange

I've just started trying to get a handle on all the thing my wife schedules for me around the kids. I've tried to get her to send me meeting requests so they go on my calendar but a lot of the time they're just not coming through. I get all of her emails and I get meeting requests all day long but there seems to be a problem getting the meeting requets from her.
She has an iPhone 4S and I have an iPhone 5 both running IOS 6.
She has gmail set up as Exchange in Mail on the iPhone.
I have a true MS Exchange account set up on the iPhone
She will create an event and add my work email as the invitee. It will show up on her phone but never come through sometimes.
Sometimes I've noticed that on her phone my name has a question mark next to it in the invite.
Any ideas? Any direction?
Thanks
Josh

Any ideas on this? Still having the problem.
Thanks
Josh

Reference number not coming in the fotter of the sec pafe

Hi,
I am designing a interactive adobe form. In the master page i have a header witht he formname and a logo and in the footer I have page number and a text field binded with the interface field to display the reference number. Form has one page ,but at run time when in some condition data may flow to next page . Now Problem is on the second page evrything come fine header, data in the content area and the fotter. but In the footer the value of the text edit fields that is mapped to reference number is not coming as it is in the first page.
Adding a picasaweb link for the footer pics for reference.
http://picasaweb.google.com/118441215574862266574/UntitledAlbum
Pooja

>>In the master page i have a header witht he formname and a logo
>>..
>>on the second page evrything come fine header
header info seems to be static, so no probs while displaying in the second page.
>>in the footer I have page number and a text field binded with the interface field to display the reference number
is your interface field that is binded a simple string field which can occur only once, or is it a part of multi occuring structure like table.
>>Now Problem is on the second page ..In the footer the value of the text edit fields that is mapped to reference number is not coming as it is in the first page
the problem seems to be in the binding of the text-field to the corresponding reference number coming from the interface-context. for the text-field in the footer, verify: Object -> Binding -> Default Binding, make sure it does not contain any * in it.
other check could be, you can apply some coloured border to the text-field in footer of master pages, and ensure the rectangle atleast visible in both pages
regards,
BJagdishwar.

Problem regarding request not coming to the cube,

Similar Messages

Maybe you are looking for