Problem still after reset, etc...

I purchased my 2nd gen shuffle about a year ago, used while running, then had not used it for several months. When syncing thru the USB, it shows that all my songs and podcasts are loaded (when I dragged and dropped) onto my shuffle. When attempting to play, it blinks green and orange alternating for 2 seconds. I've run the diagnostics, and everything works except the sync test. I've restored, updated, and reset all to no avail. when clicking on the help tab, it just takes me to the web page showing the picture of what the diagnostics look like, but gives me no option as to what to do next. Please help.
Wes A

In one of the recent iTunes upgrades, podcasts all defaulted to 'skip when shuffling'.
If the Shuffle is loaded with files that are set to skip when shuffling and the switch is set to the shuffle position, the iPod will freak and blink this way...maybe in this case?

Similar Messages

Problems still after adding Media Feature Pack (win8.1, 64bit, c660d)

Hi guys!
I.m just after installing win8.1 pro N to my Toshiba Satellite C660D laptop, it was a clean install directly from win7 (so no 8 meanwhile), i updated everything just after install, also the newest Media
Feature Pack (6.3-KB2835517-x64) update to have media content too.
The following problems I had:
still nothing that helps me in media parts (no media player, no sound recording, no webcam-i couldn.t see its place in device manager either)
i couldn.t install one update (error code: 0x80070003 )
and some appeareance problems, might due to the lack of video card driver
and some smaller background missings.
So i.ve installed drivers (it was a collected driver pack by Toshiba, directly to help upgrading from 7 to 8), which made my appereance running good, all the installs came down and installed - but still no media pack (no
player, no mic, no webcam).
If I want to install again 6.3-kb28355.... it tells me that i.ve already did it.
The errors i still have at system logs: some services cant run "the system is configured to not allow interactive services.", and "The server did not register with DCOM within the required timeout." Also
some warnings: "WLAN Extensibility Module has stopped." and "The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM.........", this last one is from source "Kernel-Pnp"
Update Troubleshooting tells me that "problems installing recent updates" is Not Fixed, also
SFC Scan (same time at the Command Prompt too) "did not find any integrity violations". However
checkin the updates it comes that I have installed all the recent updates (everything is green and happy)
Since yesterday i.ve tried many many possible solutions; these above are from the last reseting of windows (so there shall be no other disturbing factors in the background (?) ). Please if somebody has any idea what a) happened b) shall i do to fix. Is there
one problem here that might causes the others, or is it more difficult..?
Thanks for listening,
cheers
totto

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Problem editing after resetting computer

I recently had to reset or reinstall my laptop, and therefore had to reinstall Adobe Premiere Elements 12 as well. Before this it worked fine to import and edit MVI video files from my Canon Powershot SX260 camera, but now when I was about to edit for the first time since the reinstalling, I couldn't import the video files to the editing program.
Before, when I've tried to import AVI files a window has popped up saying I don't have the right codec, or whatever, but now the problem is different as nothing happens at all. I drag the files as usual to PE12 but, well, like I said, nothing happens. The program doesn't seem to react at all. I assume it has to do with some settings having changed after the reinstalling? Well, my computer is a Lenovo ThinkPad. Windows 8.1. 64-bit. I don't know what information is needed exactly. Some help would be appreciated.

jollestudio
Glad to learn that you have resolved your own issue. Great job.
If you have the time, could you please tell us what was the key to your success to get Premiere Elements working for you again.
Others looking for answers in these threads would benefit from those details.
Best wishes
ATR

Iphone 3GS white screen, still after reset. I DIDNT GET IT WET?

I hit a dirt jump on my bmx bike with my phone in my pocket and fell. Not to hard but i guess hard enough to make the screen turn white ;[. So after googling the issue i found out i should try to reset it. After restating the phone several times the white screen still stayed there. It sometimes had faint Rainbow vertical lines. I can still use my phone because it vibrates and rings when i call it. The touch screen still works to. But the ***** screen is white. So i was thinking if i replaced it with a new digitizer and lcd screen *http://cgi.ebay.com/iPhone-3Gs-full-LCD-digitizer-screen-replacement-/2507962423 17?pt=PDA_Accessories&hash=item3a649ef58d* it might work. Am i right? If i drop 50 bucks on this and its still broken im gonna be ***** pist.
The lcd screen doesn't seem broken, when i disassembled the phone there wasn't any obvious tears or scratches.

how would you recondmend selling it for parts? And do you honestly think its worth a try buying that item i linked in my first post? i can get a gold back housing and gold metal trim thing for cheap. Would those new aditions make it sell for more and if so would i get profit over the money i spent in parts?
GOLD BEZEL
http://cgi.ebay.com/Metal-Middle-Frame-Bezel-housing-Fr-iPhone-3G-3gs-Gold-/2805 50935001?pt=PDA_Accessories&hash=item41522389d9
HOUSING
http://cgi.ebay.com/iphone-3G-3Gs-16gb-housing-back-cover-Chrome-Gold-/230586106 456?pt=PDA_Accessories&hash=item35b000c258

Problem Fan after reset SMC

Hi All,
I'm getting mad. Just few days ago my Mac died during a skype conversation and it was the logic board, now fully substitute from Apple.
Now I have a different problem, during youte or something that take a lot of memory the temperature grow up quickly and the computer shuw down.
I've tried also to reset SMC but nothing...the temperature is very high (85) and the fan is always 2000rpm...what can i do befor bring back again to apple?
Best Regards

Problem solved by my own. But do not how :) magsafe again working and the laptop tooo

HT201412 After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several time, but the problem still exists

After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several times, but the problem still exists

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Contact the developer/go to there support site
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

After resetting & restoring iPad from iTunes backup, I got A LOT of a problems

These might not me "A LOT :O" for you
But for me, I'm getting sorta mad that Steve Jobs is dead, apple went ⬇️DOWN
I have 2 problems:
Problem 1: after resetting and restoring from iTunes backup, i get all the settings back. But my apps didn't. If I download them, would I have my files back? Like my minecraft worlds? I had VERY important stuff
Problem 2: when I want to download a paid app like minecraft, and I downloaded it from the same apple ID, it doesn't say 'free', nor it has a cloud, But it says $6.99. Please help me. I have IOS 7.1.1.
Thank you,
Ab

[b]SOLVED[/b]
Answer for question 1: yes
Answer for question 2: follow these steps:
1) Log out of your apple ID
2) log back in
So hard

After upgrading to yosemite on my macbook pro the spinning wheel does not go away.i have reset the SMC and PRAM but the problem still persists

After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help

Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

i mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
Thnksssssss....

So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

Eek. Sounds like something in the app caused some serious software issues. You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; '''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

Problem still after reset, etc...

Similar Messages

Maybe you are looking for