Problem using help areas on Organizer.  Log-in never connects

Technical Question:  Problem…Can’t log-in.  Details:  “Photoshop Elements-10 Organize” is open and I am trying to access the “suggestion” that shows in the lower right corner of the screen. I am using my ID as my email address and my Adobe password that was updated yesterday. When I put this in the log-in window that pops up in the middle of the screen and click “submit”....the resulting buffering symbol just keeps moving and it never stops…it shows a message as, “Signing In…”  Since the buffering symbol never stops moving, this locks the page. I have to use Ctrl-Alt-Delete to close the program. I know that my email address and password are correct because I just used them to log in to www.adoberevel.com and into this current Adobe site. What should I do?

Is this from the welcome screen? What is the suggestion you are trying to access and have you previously been using photoshop.com? That service has now closed along with the inspiration browser. All video tutorials are available on Adobe TV at the link below.
http://tv.adobe.com/show/learn-photoshop-elements-10/

Similar Messages

  • Is anyone else having problems using the Elements 9 Organizer?

    I have upgraded from Elements 6 to Elements 9 and am finding glitches in the organizer and some of its functions. For example, to share my images online through Photoshop Showcase, I need to unstack them before making an album. If I do not unstack, all the images in the stack, regardless of how I select them, are included in the album. I stack my worked and edited images together with the original photo. When I use the display in 'import batch' view, I get several copies of my images in each import date of those that are also included in my stack, very frustrating. Often the stacks just keep on multiplying in the display using this sort of view. When I delete an image from a stack, the display jumps to another time and date and image on my organiser and I need to note and remember where I was working so that I can get back to the right spot again. I am less than happy with this and other obvious bugs in this version.

    Hello,
    I too encountered difficulties with Stacks.  The advantages were few, the disadvantages many, so I unstacked everything and have never never used it again.

  • Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems,

    Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions.  When I click to accept the terms and conditions, nothing happens and the editor fails to open.  Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open.  Any advice?

      Premiere Elements 10 is now 64 bit, but not PSE10.
    Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
    Click image to enlarge
    Turn off face recognition and the auto-analyzer to improve performance.
    When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

  • "Sorry, we are unable to log you in" message when trying to purchase a product. Any help please?

    I am trying to purchase (or even use a trial version at least) a product in extension manager and it gives me "Sorry we are unable to log you in" message no matter how many times I press "Log in" button.
    Would appreciate any help please

    Hi Alwaysadobe,
    Glad to hear that you have solved the problem. We also got the help from Adobe Exchange team. They gave the steps below for this issue. If you have any other problems, please let us know. Thanks.
    Xiaoyi
    ========================================================================================== ============================
    If the user has already created a new AdobeID and tried to deleted file at the Application Support/Adobe/opm.db and it is still not working he should try this.
    you could suggest that the user closes all applications and Repair Disk Permissions on OSX:
    2. Open Disk Utility, located at /Applications/Utilities/Disk Utility
    3. Select your startup disk on the left of the Disk Utility window
    4. Select First Aid from the tabs
    Click the "Repair Disk Permissions" button
    It is always a good idea to run Repair Disk Permissions on OSX after an update, say from 10.8 to 10.8.x.
    On Windows he can Run sfc /scannow In the command prompt.
    1. Type sfc /scannow and hit Enter.
    He could also try and disable any 3rd party firewall, antivirus programs. I hope this helps.

  • Log in problems-please help!

    Hi everybody!
    I repost my log in problems with some uppdate info, it may help someone to come up with a solution....I am no computer expert, so please excuse my way of describing this problem.
    I switched my Mac off manually after having been frozen from the sleep mode.
    I have 2 accounts, one admin and one regular. I try to log into my admin, and I get the message "You are unable to log in to the user "my username" at this time".
    I restart the computer, same problem again. I can log in to my second account with no problem. I reinstall OS X, same problem again. I ran the disk utility from the installation CD, even changed the passwords and I am still gettig the same message. Neither can I log in when in safe mode.
    I would appreciate any suggestion, since my admin account contains valuable data and to reinstal/restore everything will be a pain..and probably impossible. Moreover, the data are encoded in the file vault and I cannot open them from my regular account, or can I? I have tried to open the sparseimage file in the admin user catalog, but I get "no mountable file systems".
    Is there any hope? Or should I return my Mac to Apple, in 3 days my one year guarantee expires....
    Thanks
    Evacha
    iMac G5   Mac OS X (10.4.6)  

    "no mountable file systems"
    Sorry to hear of your difficulties, but unfortunately, the above message suggests that your data is likely permanently lost.
    When data is stored in a disk image, damage to any portion of that image has the potential to render all of the files on the image inaccessible. Shutting off the power to the computer without "shutting down" normally increases the risk of damage to the directory in general, but if the image was actually mounted at the time, then damage could also occur to the directory in the disk image. Sometimes such errors may be repairable, but with "FileVault", the disk image is encrypted, reducing the chances of a successful recovery. It is unfortunate that nobody told you that maintaining up to date backups is essential when working with "FileVault" protected accounts.
    " the data are encoded in the file vault and I cannot open them from my regular account, or can I?"
    Normally, only the owner of the ".sparseimage" used in "Filevault" is able to access the image to attempt to open it - this is strictly a permissions issue and has nothing to do with encryption. If someone other than the owner attempts to open the disk image, the message is something like "Filesystem failed to mount... permissions denied". If the permissions are changed such that other users are allowed to use the ".sparseimage", the they would normally be prompted for the password and be allowed to mount the image. However, the "no mountable file systems" error indicates a problem with the image itself.
    It is not likely to succeed because I think the filesystem needs to be mounted for this to work, but there is no harm in trying to repair the disk image. Control-click on the "user.sparseimage" file and select "Get Info" from the contextual menu. Under ownership and permissions, change the "Owner" to the second user, or else give "Owner", "Group" and "Other" "Read & Write" access, then follow the instructions in this document:
    http://docs.info.apple.com/article.html?artnum=25695
    You could also try some of the strategies described in this hint, but again, the probability of success is low:
    http://www.macosxhints.com/article.php?story=20050326041757989
    I don't think you will be able to return your computer - check the documentation to make sure, but I think the "one year" only covers repairs if there is an actual physical defect - perhaps what is responsible for the original sleep problem. However, if you suspect you may have a lemon, you might want to consider buying two more years of AppleCare coverage as insurance, but I think it has to be activated before the original 1 year is up so you would have to hurry. But so far, I don't see any solid evidence of a defect - loss of the user data can be attributed to cutting the power without shutting down, which you said you have done more than once.

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • HELP! Problem using HPSCAN.exe or TWAIN driver for HP Laserjet Pro cm1415fnw using Windows 7

    I have been using the HP Laserjet Pro cm1415fnw for over a year without a problem.  At the time when I first purchased the unit, I was using a Dell desktop with Windows XP and connected the printer via USB port.  I was able to print and scan from my computer, including from within applications that use TWAIN scanning driver such as Word, Acrobat, etc.
    I have since upgraded to an HP slimline s5-1160 computer using Windows 7.  I installed the Laserjet software from my installation CD's without a problem.  The printer is connected to the computer by USB port.  I can continue to print without a problem.  However, I no longer am able to scan using the HP software (HPscan.exe) nor from within applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I attempt to do so, it takes a long time before it asks me what TWAIN scan driver to select.  When I select the HP cm1410 MFP series, the program either crashes or reverts to the state it was before I attempted to scan an image into a document from within the program.
    I can however scan successfully using the Windows Scan and Fax wizard or if I choose "Devices and Printers" from the Start Menu and select "Start scan" from the menu after right-clicking the HP printer icon.  However this option limits my use of the scanner -- I cannot scan to a PDF nor can I scan multiple pages into an OCR application.  I'm forced to scan to either a JPG or TIF or PNG.
    As for attempting to resolve this problem I have done the following with no success:
    Uninstall and reinstall the full software and drivers (and using the most recent version on the HP website)
    Change USB ports and/or cables
    Run the HP scan diagnostic utility, which seems to show an error at the WIA scanning step and then recommends that I uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting that I use the most recent version of the drivers (the driver that I am using is v 3.0 dated 11/12/2009)  Therefore in this case the HP scan diagnostic utility does NOT provide a fix for this problem other than uninstall and reinstall, which I have done several times to no avail
    Contact HP support both for the computer and the multifunction printer (which as I understand are different support staff).  The printer staff claims it's a software problem and that the computer staff should be able to resolve it (something about not having "launchpad" installed properly.  When I contact the computer staff, they claim it's a printer driver issue.  So I am at a standstill
    I researched the HP support forums only to find from this link - http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02661093&cc=us&dlc=en&lc=en&product=4089468&tmp​... - that if you cannot scan from HP software that you can use the programs that rely on WIA drivers (Windows Fax and Scan) which I already know I can do but implies that HP does NOT have a solution for how to scan using their own software!
    My gut tells me that this is one of those problems that many others may have but for which there is no workable solution.  It's possible that during the course of uninstalling and reinstalling the software, remnants may remain behind that prevent proper functioning of the drivers, but without knowing how to specifically "clean" those remnants before reinstalling the software, I am at a loss.  Oh and by the way, I've also tried using CCleaner and Norton Registry Cleaner in an attempt to clean those remnants, but that effort didn't help.  
    My question is basically this... does anyone know of a fix around this problem or must I resign myself to using the Windows Fax and Scan wizard to scan in documents and images and forget about using TWAIN programs as HP seems to be suggesting?  I would think that given that I am using an HP printer/scanner along with an HP computer with Windows 7 that this problem should NOT be a problem!  
    This question was solved.
    View Solution.

    Before attempting to install the printer on my computer (HP slimline s5-1160), I had been able to successfully install the printer previously on two other computers: a Lenovo T-410 laptop (work computer using Windows XP) and an HP Pavilion Elite HPE (wife's computer using Windows 7).
    On those computers, I can use the TWAIN driver from within applications without a problem, and the HPSCAN.exe file works as well.  Both computers connect to the printer wirelessly.
    It is while trying to install the printer on my home computer via USB that I am having all sorts of difficulty. I have also tried to connect my s5-1160 to the printer wirelessly from my computer. I also checked the Windows Services, and all seems fine there.  I also tried switching USB ports and cables.   Again, no luck with the scanning using TWAIN driver. 
    One other point: when I use the original installation CD that came with the printer to install on the s5-1160, the installation seems to stop when it says "Checking requirements for installation"  That didn't happen with the two other computers.   However, that problem doesn't happen the s5-1160 when I used the more recent version of the full software from the HP website.
    Let me reiterate.  I have never had any problems with printing from any computer.  The scanner works fine from my s5-1160 if I resort to using the scanner and fax wizard using the WIA drivers.  What I am unable to do is to get the scanner to work from within an application using the TWAIN driver or if I use the native HP application (hpscan.exe).  Nothing seems to happen.   Because of that I cannot scan directly into a PDF.
    And the only fix that the HP scan diagnostic utility continues to recommend is that I uninstall and reinstall the software.  It shows errors in the WIA scanning step and TWAIN step.
    Is it possible that because of behind-the-scenes Windows updates that my s5-1160 is receiving that a software conflict is created that prevents the TWAIN driver from functioning properly?  Other than that I am at a loss to figure out why this is happening.

  • I just got a new ipod and i dont know how to use it. it keeps asking me for wifi connection or to log on to itunes. i logged on to itunes but its still not working please help

    please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes

    iPod touch User Guide (For iOS 5.1 Software)
    Are you connected to wi-fi?
    If not, then connect.

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • Every time I use PSE 10 to organize my photos, it says it has encountered a problem and has to close

    Every time I use PSE 10 to organize my photos, it says it has encountered a problem and has to close.  How can I reinstall it without going to a newer version?

    Generate another of those errors, and click the "Click here" link in the error message box.
    What modname and modver do you see for the error? (Precise spelling, please.)
    If the error is a BEX and you thus aren't seeing a modname or modver, let us know what P1 through P9 items are being listed for the error.

  • I am having a problem using the help menu in Adobe elements 5

    I am having a problem using the help menu in Adobe elements number five.
    When I open the help menu, the dialogue box defaults to an unreadable display font. Is there any way to change that default font? Using the help menus to find a solution is not possible for I cannot read what it is displaying.

    For product, there is an option in preferences where we can set fonts. There are two options: One is application font and other is system font. I am talking about elements 8 which I have but not sure that will solve your problem which is help related.
    Hope Help in 5th version is html which opens in Browser? Please confirm.

  • Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

    photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
    can someone help me with this issue?

    Two suggestions:  the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements.  Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1.  I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

  • HELP!! Problems using some apps??

    Can someone please help?
    Im having a problem using some Apps - mainly Natwest banking and My Fitness Pal both are saying i require internet to use (wifi or 3G)
    I do have BIS on my phone and can acces internet and other apps suck as Facebook, GoogleMaps, Paypal etc etc.
    Is there something different i need to do to use these apps?
    Im using BB Curve 8520 OS 5v
    Thanks

    Did these apps work ok for you in the past?
    On your Manage Connections screen, click on the Services Status. What is the status of the BlackBerry Internet Service?
    Try turning off the Mobile Network at your Manage Connections screen, and using ONLY a WiFi connection and see if that works.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Problems with installation SAP Netweaver ABAP 7.0

    Hello, can someone give me an adice on installing SAP NetWeaver ABAP 7.0 trial version, please? After installing the application server and SAP management konsole and stopping the application server following message pops up. The same message pops up

  • Shared Disk - can't connect with Fast User Switching

    Hi, I've created a Disk on my Time Capsule, and shared it via "File Sharing", it's secured "with a disk password", and is working well ... sort of. I can connect to it with no issues, and so can my wife via her MacBook Pro. However, if I'm signed int

  • All music on external hard drive - ITunes 'sees it' but can't find it

    a while back i moved all of my music to an external hard drive - i was unaware of all the steps that had to be taken to preserve the ITunes library. Now I've gotten back on ITunes and there's an "!" next to every single song i burned from all of my C

  • Displaying an Ipad 1 photo on a TV screen

    Hi. I want to show photo images (one at a time) on a large screen TV for a class I teach. I have a first generation iPad, a HD TV and the HDMI cords, etc. Is this ONLY possible with the slideshow format (which has too short of viewig times for my pur

  • Color artifacts with A7s and A6000 files using Camera calibration profiles

    I'm seeing some really obvious chroma artifacts / false colors with RAW files from either a Sony A7s or A6000 when using any of the Adobe-provided Camera calibration profiles that emulate Sony's rendering. This seems to happen at any ISO, and is very