Problem with a user-password request, urgent please!!

Hi all!!
I´m consuming a WS on XI with a Web Dynpro ABAP. When I execute the proccess I get an error, because is necessary to introduce an user and password in a popup to access XI.
How can I avoid this request??

In addition to SSO to connect to XI,
you can also look at PROXies.
See transaction SPROXY.
Proxies to Interfaces on XI can be generated on the ABAP stack. Using SPROXY.
The genrated ABAP classes can be called from your WDA application.
System users are registered for the connection between stacks.
See XI post installation Guide for more details.
So you have a couple of alternatives.
But we strongly recommend you dont use URLs to pass passwords.
If the password must be sent with the SOAP call, speak to you XI consultant about
passwords inside the payload / message header and use HTTPS to do the SOAP call.
regards
Phil

Similar Messages

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

There's a problem with the recipient's mailbox. Please try resending this message.

I have a user who cannot receive a message from a particular external sender. That senders assistant (same domain and server as the external sender with the issue) is able to forward the exact same message to my user and it arrives as it should. In
message tracking, I can see the message came in through my smart host, through my front end and to the users mailbox server, where an NDR was generated. We had the assistant forward us the NDR and it says:
There's a problem with the recipient's mailbox. Please try resending this message. If the problem continues, please contact your helpdesk.
From my 3rd party smart host/spam filter, I have a copy of the message in audit and when I forward it to myself, the same thing happens - it generates an NDR when it arrives at my Exchange mailbox server. This makes me conclude that my end users mailbox
isn't corrupt, rather it's something in the message header that our server doesn't like (I've seen this happen with other senders as well, but it is extremely rare and random).
Details/facts of my environment:
-Current production messaging system is Exchange 2003.
-Working on Exchange 2010 co-existence.
-This problem between this sender and us has been an issue before the introduction of Exchange 2010.
-I'm hoping to begin end user mailbox migrations to 2010 and will have the sender try again at that time, but I still have testing to do with our voice messaging system before I can begin moving end user mailboxes.
....Begin redacted NDR detail....
Remote Server returned '< #5.2.1>'
Original message headers:
Received: from fe.mydomain.com ([192.168.1.10]) by
mailboxsrv.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675);      Thu, 4 Sep
2014 12:49:48 -0700
Received: from exc2010.mydomain.com ([192.168.1.50]) by
fe.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675);        Thu, 4 Sep
2014 12:49:47 -0700
Received: from smtp.mydomain.com (192.168.1.49) by exch2010.mydomain.com
(192.168.1.50) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 4 Sep 2014
12:49:47 -0700
Received: from pps.filterd (PPMail.mydomain.com [127.0.0.1])   by
PPMail.gsblaw.com (8.14.5/8.14.5) with SMTP id s84Jkb0n023682       for
<[email protected]>; Thu, 4 Sep 2014 12:49:47 -0700
Received: from na01-by2-obe.outbound.protection.outlook.com
(mail-by2on0098.outbound.protection.outlook.com [TheirIP])    by
PPMail.gsblaw.com with ESMTP id 1p6da7h0jw-1 (version=TLSv1/SSLv3
cipher=AES256-SHA bits=256 verify=NOT)       for <[email protected]>; Thu, 04 Sep
2014 12:49:42 -0700
Received: from Theirexchange.theirdomain.com (TheirinternalIP) by
Theirexchange.theirdomain.com (TheirinternalIP) with Microsoft SMTP
Server (TLS) id 15.0.1019.16; Thu, 4 Sep 2014 19:49:38 +0000
Received: from Theirexchange.theirdomain.com ([10.141.86.14]) by
Theirexchange.theirdomain.com ([TheirinternalIP]) with mapi id
15.00.1019.015; Thu, 4 Sep 2014 19:49:38 +0000
Content-Type: multipart/mixed;
        boundary="_000_9a166afd24964edda2d5439ba3dbe712DM2PR08MB445namprd08pro_"
From: Mr Sender <[email protected]>
To: My User <[email protected]>, "Another external recipient ([email protected])"
        <[email protected]>
Subject: FW: A Subject
Thread-Topic: A Subject
Thread-Index: Ac/C2zn97ruwXQpoQtGNrjKOr1NckgFmNoeAAAEpQ2A=
Date: Thu, 4 Sep 2014 19:49:37 +0000
Message-ID: <[email protected]domain.com>
References: <[email protected]domain.com>
<[email protected]ET>
In-Reply-To: <>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]domain.com>
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [internetIP]
x-microsoft-antispam: BCL:0;PCL:0;RULEID:;UriScan:;
x-forefront-prvs: 0324C2C0E2
x-forefront-antispam-report: SFV:NSPM;SFS:(10009015)(6009001)(189002)(199003)(377454003)(164054003)(64706001)(66066001)(19609705001)(15202345003)(50986999)(19300405004)(19625215002)(90102001)(80022001)(20776003)(83322001)(101416001)(99936001)(76176999)(54356999)(81542001)(21056001)(19580395003)(86362001)(4396001)(92566001)(16236675004)(85852003)(551944002)(74502001)(83072002)(87936001)(74662001)(31966008)(107886001)(81342001)(76482001)(46102001)(85306004)(105586002)(33646002)(15975445006)(99396002)(76576001)(74316001)(77982001)(79102001)(95666004)(108616004)(2656002)(106356001)(99286002)(24736002);DIR:OUT;SFP:1101;SCL:1;SRVR:DM2PR08MB446;H:DM2PR08MB445.namprd08.prod.outlook.com;FPR:;MLV:sfv;PTR:InfoNoRecords;MX:1;A:1;LANG:en;
MIME-Version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.27,0.0.0000
definitions=2014-09-04_03:2014-09-04,2014-09-04,1970-01-01 signatures=0
X-Proofpoint-Spam-Reason: safe
Return-Path: [email protected]
X-OriginalArrivalTime: 04 Sep 2014 19:49:47.0046 (UTC) FILETIME=[61900460:01CFC879]

A little more discovery...
From my smart host/SPAM filter audit folder, I could see the message was received with a 2 meg "winmail.dat" file. Yesterday, I had attempted redirecting the message to my own mailbox, and it bounced. I decided to try redirecting the message
to a 2010 mailbox, and the message arrived. It had 3 attachments, 1 Word doc, and 2 PDF files. So, this appears to be an encoding issue with the winmail.dat file. Any work arounds/reasons for winmail.dat from being rejected at the mailbox
server? Once it made it to a 2010 mailbox/client, I was able to forward to a 2003 mailbox no problem.

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Problems with the sap* password

Hi,
i have a problem with the sap* password.
I tried my masterpassword but it did not work.
So i tired the following from the Tread: Password problem with user DDIC
resetting password for sap*
sqlplus "/as sysdba"
sql> update sapsr3.usr02 set bname='SAP1' where bname='SAP' and MANDT=000;
sql> commit;
Bud it did not work. After i tried to delete the sap*1 from the table sapsr3.usr02 but it did not work.
sql>delete from sapsr3.usr02 where mandt='000' and bname = 'SAP*1';
I also restarted the instance after the commands. But i can not logon with 'sap*' and the password 'pass' .
Mybe someone can help me?
Regards
Mike

Starting with release 7.00 based system you have to set
login/no_automatic_user_sapstart=0
in your instance profile and restart the instance.
Markus

Having problems with key chain password

I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?

There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem

The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

Problem with AppleID login password

Hi - I'm from Europe. How can I contact talk to a real live person from "nonstop " customer support service - I need help - have problem with AppleID login password

DanielBuggati wrote:
Hi - I'm from Europe. How can I contact talk to a real live person from "nonstop " customer support service - I need help - have problem with AppleID login password
Have you tried MyAppleID <<== click this
There is a link there for "Forgot your Password?"

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

I'm having problem with my bios password. It tells me to enter current password 100-10250x

Having problem with my bios password.it tells me to enter current password 110-10250x

Place the iPod in recovery mode and restore via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Urgent - problem with multiple users on same page

Hi all,
I have got an big problem with my app:
when several users are using the same page, the action launched by USER_A affects the page displayed and used for USER_B.
If there is only one user using the page, there is no problem at all.
The webapp is deployed on Tomcat or JBoss and the problem remains the same on both.
Thank you for your help.
PS: I am not accurate because I don't know what to paste here.

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Problem with a user-password request, urgent please!!

Similar Messages

Maybe you are looking for