Problem with CRL distribution in AD Certification Authority

I am implementing an AD Cert Auth for purposes of 802.1x secure WLAN. I am using a 2012R2 domain controller as the CA and a 2008R2 web server.
Following the steps in this document: http://technet.microsoft.com/en-us/library/cc730811.aspx and other docs linked therein.
Part-way through I had to change the web server being used for distribution of Certs and CRL's (for reasons I won't elaborate just now) and doing so seems to have screwed things up.
When I run pkiview.msc on the CA it shows the cert itself and the AIA Location as OK, but the CDP and DeltaCRL locations as in error. The url's are correct.
In the event log I find Cert Auth Event ID 65 with this text: "Active Directory Certificate Services could not publish a Base CRL for key 0 to the following location: file://\\pki.mydomain.com/pki/mydomain-Server01-CA.crl.  The system cannot
move the file to a different disk drive. 0x80070011 (WIN32: 17 ERROR_NOT_SAME_DEVICE)."
Running certutil -crl produces a similar error:
PS C:\Windows\system32> certutil -crl
CertUtil: -CRL command FAILED: 0x80070011 (WIN32: 17 ERROR_NOT_SAME_DEVICE)
CertUtil: The system cannot move the file to a different disk drive.
PS C:\Windows\system32>
I am not (to my knowledge) trying to move anything, but presumably under the covers something is being moved.
If I manually copy the CRL and +.crl files from the CA to the web server, the error goes away but only until the next reboot or redistribute cycle - which is daily.
Anyone know how I can recover from this?
No sig is a good sig

I never had this issue previously, however, I would check:
1) whether CA server has Change or better share permissions on remote share
2) whether CA server has write or better NTFS permissions on the remote folder
only if all is correct and all permissions are set correctly, I would try to remove file:// prefix. Just UNC path.
just to clarify: isn't this share located on the same server as CA?
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Similar Messages

  • Problems with cost distribution "by value"

    Hi All,
    We have the following problem in cost assignment in shopping cart: We can choose different cost distributions: 1. by percentage; 2. by quantity; 3. by value. When choosing 3 - "by value" and distributing values to different WBS-elements with budget check, system comes up with several error messages saying budget overspend, also we exactly fill in the open budget on theese WBS-elements. The main reason for this seam that our backend system R/3 4.70 just knows the two posibilities 1. - by percentage; 2. by quantity.
    Do you guys know a possibility in customizing or elsewhere to deactivare the possibility 3 - by value, since I think back end can not work with this kind of distribution.
    Best Regards Thomas

    Hi
    Do you want to remove the drop down by value in the shoping cart screen ?
    BADI - BBP_UI_CONTROL_BADI  - method BBP_SC_UI_CTRL  field control You may try here
    regards
    Muthu

  • Problems with my Distribution Certificate.

    Hi,
    My iPhone app is ready to roll and I can't get this distribution certificate to work. The developer certificate uses my name but the distribution certificate needs to be under my company name. Since that is my account name.
    So I requested a certificate from a certificate authority (no cert authorities were selected). I uploaded the file to to developer program portal. I approved the request and downloaded the certificate.
    It looks fine. It's name is iPhone Distribution: My Company name and it is issued by Apple worldwide relations blah blah blah.
    I then created and downloaded a distribution provisioning profile. By dragging it over iTunes.
    Now when I go into the Target info of my app I can only do one of two things. Choose the code signing identity for Any iPhone OS Device to be iPhone Distribution: but with no company name.
    Then in the code signing provisioning profile. I can choose the provising profile that I set up.
    If I enter the iPhone OS Device to be iPhone Distribution: My Company name then the provisioning profile is no longer selectable. I can enter it manually but I get a build error
    CodeSign error: no certificate found in keychain for code signing identity 'iPhone Distribution: My Company Name'
    Can someone please help me? It's driving me not so slowly insane.
    Thanks,
    Travis

    Yes my provisioning profile is in the directory, and yes the name matches exactly.
    Something I read somewhere and what I've tried is leaving the company name off and just entering iPhone Distribution:
    From what I can tell it does a search for certificates with these words. Since the only certificate for distribution is my company one then I think it has found it. I did a build and the keychain part appeared to work (it asked if my company wanted to allow access.)
    It also has the embedded.mobileplatform file.
    Do you think it worked even though I didn't put my company name in there?

  • Problem with data distribution from HCM to e-Recruiting

    Hello masters:
    I have a problem when I try to distribute data from HCM to e-Recruiting. I´m getting code 51 just for the PA infotypes segments (E1P0000, E1P0001, etc.). The error message tha I am receiving is:
    "Error in subroutine read_namtb for structure of infotype".
    My e-Recruiting system is SAP EHP 1 for SAP NetWeaver 7.0, so I'm using Business Partners for storing data from PA infotypes.
    I'm using message type HRMD_ABA, basic type HRMD_ABA05.
    I think it could be the implementation HRRCF00_INBD_NEWMOD from the badi HRALE00INBOUND_IDOC, because it usually get inactive even though I go to activate it.
    Does anybody knows what can I do?
    Thanks in advance!
    Edited by: Rodrigo Arenas Arriola on Jun 25, 2009 2:45 AM

    Hello Rodrigo,
    Ifyou are using EhP1 for NW 7.0 you should have E-Recruiting 600 EhP 4 on your system.
    I never encountered this special error message so far, so i have to "guess". The message indicates that the system had trouble reading some infotype information.
    The ALE distribution for EhP4 is storing the PA data in new infotypes 558*. The error you get points to a missing BAdI activation. If the BAdIs are not activated correctly, ALE will try to write the information from the PA infotypes 1 to 1 into the E-Recruiting system. But E-Recruiting does not know the PA infotypes which should exactly lead to the error you get.
    Could you check the following settings:
    BAdI                     Implementation 
    HRSYNC_P                 CONV_HR_DATA_TO_EREC -> active
    HRALE00INBOUND_IDOC      HRRCF00_INBD_NEWMOD -> active
    HRALE00SPLIT_INBOUND     HR_INB_PROCESS_IDOC -> inactive
    HRALE00INBOUND_IDOC      HRRCF00_DELETE_SPREL -> inactive
    Kind Regards
    Roman

  • Problem with standard distribution function

    Hi,
    The task is following:
    There are three cubes - one with data to be distributed (non-transactional), one with reference data (non-transactional) and one where the distributed data should be written (transactional).
    I am trying to use standard IP planning function Distribute with Reference Data to achieve the result. However when I put 0INFOPROV as a characteristic to be changed, I can select value for it only in block FROM and TO, and not in REFERENCE DATA SELECTION.
    So to tell the system, taht reference data are located in third cube I have added new car which for the is always filled with constant in the reference cube (for every record).
    But it seems that it does not help: When trying to execute, following error message appears: Cannot find reference data for sub-process 1 of the function
    Anywone has ever customied standard function in a way that it is able to use data from three cubes? What do I do wrong?
    Thanks in advance,
    Marcin
    ps. I work with IP, but assume that BPS is very similar regarding stadard planning functions, so any suggestion is welcome.

    of course you can include 0infoprov into fields to be changed, but in your szenario it wouldn' make any sense.
    if fox formulas you set values for 0infoprov by yourself, in distr. function you are telling the system: distribute origin field value for char xy according all posted values in certain reference records.
    as 0infoprov is a technical infoobject and given the fact that your reference records are stored in cube 3 which is non transactional as well) -> to tell the function, that your reference records are stored in cube 3 you have to set 0infoprov as reference char.
    if you can not copy all data before distribution (to be honest i don't see any reason why this shouldn't be possible) you could only ditribute the values using function of type fox or exit.

  • Problem with Software Distribution in LMS 3.2

    LMS 3.2 on Solaris 10
    I'm trying to distribute IOS images via Software Mgmt. I'm getting the following error on step 2 - View Recommendations.
    "SWIM0087: Recommendation module timed out while waiting for the procedure to complete.
    Either the device had many images to process or one of the services used by this application is not responding.
    Either fine-tune the administrative preferences to filter out any unwanted images or check the application logs for more details."
    We have two LMS 3.2 systems in a master-slave configuration. Both of which were recently upgraded to LMS 3.2 from 3.0. Software distribution is working as expected on the Slave system. It was working on the Master system before the upgrade to LMS 3.2 also.
    I've checked all of the administrative settings I can think of and they match on both systems.
    Am I missing something?
    Thanks,

    Without debugs I can only guess but the symptoms you report could be caused by a few corrupted files.
    You could try the following as it has solved similar situations.
    Move SharedHelpACE.zip, SharedSwimACE.zip, and SharedSwimGSS.zip somewhere outside the CSCOpx directory.
    The files can be found:
    \CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
    As well as:
    \CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\lib\pkgs
    Then restart the services:
    net stop crmdmgtd
    net start crmdmgtd
    If this proves unsuccessful then replace the files in their original locations.

  • Problem with InHouse Distribution

    Hello
    I hope somone can help me.
    I've developed a new App for our Company. Now this App works fine and can be installed over our Apple Server with Profile Manager.
    But some devices won't work correct.
    After the App is successfully pushed to de device and the User start it, the only thing that happens is, that the Launch Image appears. But after this the App crash.
    Some facts:
    - I read the UDID (is deprecated but works with my InHouse Account)
    - 30 Devices are working
    - 2 Devices dont work
    Have someone a Idea?
    Greets

    Fine thank you very much!
    I found the error. It'was caused by the name from the iphone. I send the name as url param, but not right encoded.
    And the error was reported in the logfile

  • Problem With Distribuction Of Acrobat Reader 9.0 (GPO)

    We have some problems with the distribution trought GPO of reader 9.0.
    We had follow this instruction
    http://www.adobe.com/devnet/acrobat/pdfs/deploying_reader9.pdf
    http://www.adobe.com/devnet/acrobat/pdfs/gpo_ad_9.pdf
    but, if the english version work fine, the italian version its bugged.
    We have download the files exe from your website (version ITA), and we have repackaged in msi version, but when we tried to do a manual install of the msi, the program dont work fine (for example the icon its not associated correctly to pdf files, some programs for example our management software dont recognise pdf files).
    I repeat, its not a problem with GPO or our IT infrastucture, becouuse the english version its work fine. We have problems only with the italian version.
    Thanks.

    You can download  Microsoft Installer Cleanup tool from
    http://majorgeeks.com/download.php?det=4459
    regards,
    Rohit

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • Client can not communicate with MP over https. Certification Problem

    Hi All,
    I have been fighting with this problem for the last 3 days and couldn't solve yet. So, I hope we can solve it here.
    I am trying to install client manually from a usb drive by using the below command. 
    Ccmsetup.exe /usepkicert smsmp=”srvsccm2012.domain.local” ccmhostname=”sccm.domain.tr” smssitecode=”AUTO” 
    Client Installs on workstations but only info that I can see under Configuration Manager Properties are:
    Client Certificate: None
    Connection Type: Currently Intranet
    Version:5.00.x.x
    So, there is a problem with connection to MP, It can not get policies and certificate info (PKI) etc...
    If I try to browse these urls, result is 403 - Forbidden: Acces is denied.  
    http://siteservername/SMS_MP/.sms_aut?MPCert<o:p></o:p>
    http://siteservername/SMS_MP/.sms_aut?MPlist<o:p></o:p>
    This makes me think certificates are messed up but if I try to browse my MP with the url below, Result is IIS 8 page. 
    https://sccmserver.domain.local
    I can see these errors in my log files:
    CcmMessaging Log errors:
    Post to http://”myservername.mydomain”/ccm_system/request failed with 0x87d00231.
    Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7.
    ClientIDManagerStartup Log errors:
    RegTask: Failed to refresh site code. Error: 0x8000ffff
    LocationServices Log errors:
    Failed to retrieve DNS service record using _mssms_mp_”auto”._tcp.mydomain lookup. DNS returned error 9003
    Policy prevents failover to WINS for lookup
    LocationServices 8/26/2014 4:18:29 PM
    3900 (0x0F3C)
    LSGetSiteVersionFromAD : Failed to retrieve version for the site '”AUTO”' (0x80004005)
    The ip address of workstation on DNS is correct.
    I can ping and resolve the name of MP from workstation.
    I want to check if my certificates are OK but I dont know how to make sure certificates are good. Please advise.
    By the way, This problem is happening on the newly reformatted workstation, existing workstations can be re-installed with client without problems.
    Yavuz Selim Atmaca

    Hi Peter,
    I checked IIS Logs and I didn't see any error messages.
    I checked the certificate requirements and I think there is no problem with them.
    certutil -verify -urlfetch command outputs some results that I couldnt understand. Here it is:
    ssuer:
        CN=mydomain-SRVDC01-CA
        DC=mydomain
        DC=edu
        DC=local
    Subject:
        EMPTY (DNS Name=selimtestPC.mydomain.edu.local)
    Cert Serial Number: 29e6fe37000000005edb
    dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
    dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
    dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
    dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
    dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
    ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
    HCCE_LOCAL_MACHINE
    CERT_CHAIN_POLICY_BASE
    -------- CERT_CHAIN_CONTEXT --------
    ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
    ChainContext.dwRevocationFreshnessTime: 7 Hours, 33 Minutes, 49 Seconds
    SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
    SimpleChain.dwRevocationFreshnessTime: 7 Hours, 33 Minutes, 49 Seconds
    CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
      Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
      NotBefore: 26.08.2014 14:19
      NotAfter: 26.08.2016 14:29
      Subject:
      Serial: 29e6fe37000000005edb
      SubjectAltName: DNS Name=selimtestPC.mydomain.edu.local
      Template: ConfigMgr Client Certificate
      74 cf 94 a4 5d 72 0f e9 19 d1 36 b4 5c 06 4e 55 12 04 89 26
      Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
      Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
      ----------------  Certificate AIA  ----------------
      Verified "Certificate (0)" Time: 0
        [0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=AIA,CN=Public%20Key%20Services,CN=Servi
    ces,CN=Configuration,DC=mydomain,DC=edu,DC=local?cACertificate?base?objectClass=cer
    tificationAuthority
      ----------------  Certificate CDP  ----------------
      Verified "Base CRL (057a)" Time: 0
        [0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
    es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?certificateRevocationLi
    st?base?objectClass=cRLDistributionPoint
      Verified "Delta CRL (057a)" Time: 0
        [0.0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Serv
    ices,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?b
    ase?objectClass=cRLDistributionPoint
      Verified "Delta CRL (057a)" Time: 5
        [0.0.1] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
      Verified "Base CRL (057a)" Time: 4
        [1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA.crl
      Verified "Delta CRL (057a)" Time: 0
        [1.0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Serv
    ices,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?b
    ase?objectClass=cRLDistributionPoint
      Verified "Delta CRL (057a)" Time: 4
        [1.0.1] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
      ----------------  Base CRL CDP  ----------------
      OK "Delta CRL (057e)" Time: 0
        [0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
    es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?bas
    e?objectClass=cRLDistributionPoint
      OK "Delta CRL (057e)" Time: 4
        [1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
      ----------------  Certificate OCSP  ----------------
      No URLs "None" Time: 0
        CRL 057a:
        Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
        a4 81 a4 bb 01 7e e1 be e2 33 4b 06 5d 00 3c 30 97 93 27 f6
        Delta CRL 057e:
        Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
        52 c5 95 b3 9d c2 9d 22 ee fa 3b c4 b9 04 08 3e 95 98 1d 5c
      Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
    CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
      Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
      NotBefore: 22.10.2010 16:50
      NotAfter: 22.10.2025 17:00
      Subject: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
      Serial: 49c50a78f367cdb8466cd34160977233
      Template: CA
      01 a8 da 41 35 f7 52 be 7a 9b 4d 26 3d ee 33 af c4 e0 9c e0
      Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
      Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
      Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
      ----------------  Certificate AIA  ----------------
      No URLs "None" Time: 0
      ----------------  Certificate CDP  ----------------
      No URLs "None" Time: 0
      ----------------  Base CRL CDP  ----------------
      OK "Delta CRL (057e)" Time: 0
        [0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
    es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?bas
    e?objectClass=cRLDistributionPoint
      OK "Delta CRL (057e)" Time: 4
        [1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
      ----------------  Certificate OCSP  ----------------
      No URLs "None" Time: 0
        CRL 057a:
        Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
        a4 81 a4 bb 01 7e e1 be e2 33 4b 06 5d 00 3c 30 97 93 27 f6
        Delta CRL 057e:
        Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
        52 c5 95 b3 9d c2 9d 22 ee fa 3b c4 b9 04 08 3e 95 98 1d 5c
    Exclude leaf cert:
      58 db 23 c9 81 00 ff 3e de e0 13 da 87 29 66 96 56 45 51 cd
    Full chain:
      ba 55 5a 92 f0 b4 69 47 01 d7 02 23 1c db 7e 88 66 f2 42 dc
    Verified Issuance Policies: None
    Verified Application Policies:
        1.3.6.1.5.5.7.3.2 Client Authentication
    Leaf certificate revocation check passed
    CertUtil: -verify command completed successfully.
    I  just checked SCCM SystemStatus/ Component Status from the SCCM Console  and found errors under SMS_MP_CONTROL_MANAGER
    component:
    "MP has rejected a message from GUID:A90AA88F-FB10-407C-B2ED-DCE41479FBDC because the signature could not be validated. If this is a valid client, it will attempt to re-register automatically so its signature can be correctly validated."
    Should I delete all config manager related certificates and re-create them? 
    Yavuz Selim Atmaca

  • I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. HELP

    I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.

    Well Authorize the Computer...........

  • Attention! About problems with Oracle 8.1.6 on newer Linux distributions!!

    Hello all, I've just got some feedback from a helful person at http://www.crunge.com/ about the problems concerning RedHat Linux 7.0 and Oracle 8.1.6, this MAY apply to other newer linux distributions.
    I've tried, without luck, to install Oracle on RedHat 7.0 and Slackware 7 (the newest one), and it would not install properly, kept stopping right about when the database initialization started at 80% finished install procedure. Sp i wrote them a mail, not expecting an answer really, but I did got an answer, and below is what the person said;
    Thanks for the feedback.
    Oracle 8.1.6 does not work under Red Hat Linux 7. Yes, that's the problem
    that I mentioned in the doc--you get to 80% and the DBCA crashes and the
    Oracle executables die.
    I've heard, but I haven't tried it myself, that if you install the latest
    glibc errata (2.1.94) then the DBCA completes but the Oracle executables
    still die. The DBCA problem was apparently a Java issue that is fixed in
    the errata. But you're still out of luck since the exes won't work.
    It might appear that this is a problem with Red Hat Linux 7. But it appears
    that it is a problem with some assumptions that Oracle made, assumptions
    that worked with glibc 2.1.3 (the C library included with RHL 6.2) but which
    prove false with later glibc versions. As other Linux distributions adopt
    the new glibc Oracle will fail to work on them as well.
    The best advice I can give at this point is to install and run Oracle on
    Red Hat Linux 6.2. Hopefully Oracle will address the glibc issues with the
    8.1.7 release.
    Chris
    p.s. Do not construe this
    as an official Red Hat response; I merely forwarded your e-mail from my
    home account. This response and the web pages I put up are mine.
    So i guess one sollution to the problem is to try a bit older version of the linux you are having problems with (i tried it on RH 6.1 and it worked like a dream).
    Another solution can be to wait it out to check and see if Oracle put a fix out here on technet...?
    Hope this helps people bogged down in fustration.
    Regards
    Ole-Henrik Helin
    Computer consultant, Mesan AS
    Norway

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Graham Strang ([email protected]):
    Hey all. Just to let you know that it is entierly possible to get Oracle to install under RedHat 7 and run happily. I have done it on two differenct machines. There is a bit of fooling with glibc to get it to work. However after you do that it works like a dream. VALinux has a work around posted at: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/
    The READEME.Oracle8i has the work around and the two tar balls are the necessary files. I followed the directions to the letter and they worked like a dream. Any questions feel free to drop me a line.
    Cheers,
    Graham<HR></BLOCKQUOTE>
    OK, so i followed your instructions to the letter (several times), sure I get past the 80% bug but now I have new erros coming up , -"Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk". I get a whole series of these errors for various mk files. These errors apear during the link phase of the install, prior to the glibc workaround I was not getting this. I am a newbie to Linux and trying to give it a serious go but so far I have had little luck
    Any help appreciated.
    Nick
    null

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Problem with distribution model receiver ports

    Hi,
    I am facing a problem with distribution model.
    I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
    But both objects will run at different times.
    Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
    I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
    When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
    So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

    Hi kotesh,
    A similar issue.
    check if this will help.
    Do the following:
    Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
    Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
    Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
    source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
    Regards,
    SuryaD.

Maybe you are looking for

  • Itunes filter prob

    is there any way that i can filter my Libary to display muisc archives instead of podcasting stuff so that i can view all my podcasting in the podciasting section and not the libary part thanx Althon 64 3800+ Windows XP Pro

  • Baffled by HP Help and Support

    I own a HP laptop ZD8000 series (ZD8215us) and my manual tells me I can upgrade my RAM to a max of 2 GB.  Recently I re-installed HP Help and Support software and after scanning my system it reported I could upgrade my RAM to 4 GB.  WHICH do I believ

  • Can't download music because ""File seems to be corrupt.''

    In the past 24 hours I have attempted to download 3 songs from iTunes, but get this message: ""The file seems to be corrupted. To redownload the file, choose ""Check for Purchases'' from the store menu.'' When I do that, the same message comes back a

  • Does icloud work with third party apps?

    Will icloud work with third party apps like minecraft pe, 360 panorama or real MYST? Just wondering...

  • Find and delete private browsing history

    trying to find and delete private browsing history in safari.  info suggests data in safari folder, file  "WebpageIcons.db".  Unable to locate.  any assistance appreciated. using IMac Mac OS X, version 10.5.8 Processaor:  2.4 GHZ Intel Core 2 Duo mem