Problem with Desktop Setup

My problem is, I select one of Apple's desktop pictures. The picture changes when I select to change on frequent times (for example every 30 minutes) or when I select Random. Is there a way to stop it from changing immediatly? Thanks

This may be a bug related to Remote Desktop.
I have a problem where Remote Desktop tries to steal the focus when I work with Excel on a dual monitor setup. So, if I have Excel open on one screen, and if I then have a remote desktop session on a second screen, sometimes when I copy that back and
forth from the RD window, the taskbar will begin to flash as if trying to get the control when I work in Excel. Note that my primary computer is Windows Vista, I am using Excel 2007 and I am using RD to connect to a Windows XP computer. Both computers
are fully patched with the latest SPs. Monitor 1 (left) is the primary monitor that has Excel on it, and Monitor 2 (right) has the RD window in full screen mode.
This becomes a problem because normally, my taskbar is hidden, but each time the RD window keeps flashing, it unhides the taskbar and covers a lot of my work. I do not recall this problem occuring in XP, but I may have forgotten. Also, I have only
noticed this problem when I am working with RD and Excel. In addition, this problem is not consistent and the problem sometimes doesnt occur.
A workaround that I use is to not open the RD window in full screen mode.
Anyone else have this issue, or any suggestions on resolving this problem?
Thanks.
Have you tried updating your Remote Desktop software?
I was having this issue on Windows XP SP3. Fixed the issue by updating Remote Desktop from version 6.0.6001.18000 to 6.1.7600.16385.
See this article for more: http://support.microsoft.com/kb/969084
EDIT: Unfortunately, this did not solve the issue as previously stated. After updating RDC it worked for a few days, then the issue came back. Still have not found a solution :(

Similar Messages

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Problem with desktop aplication

Hello, I have a problem with logging in creative cloud desktop applications.
when I enter an Adobe ID and password, so do not register the application and return me back to re-enter your username and password, and so forth ..

http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Problem with J2SDK setup

Hi all,
I am experiencing problems with my J2SDK setup. I think my problem due to many previous versions of JDKs.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
I would be really grateful to you (and anyone else) for help with this problem.
Regards,
Vipul

Hi,
Thanks for getting back to me. I have altered my CLASSPATH and path. Unfortunately it is still not working. I have run java using the full path to the jdk and the jars are loaded in from the right place, but I still get the noclassdeffound error. I have removed all references to CLASSPATH and PATH. When I run with the verbose option (with no ref to the jdk in any variable), the jar files are loaded in from C\program files\java\j2re1.4.2_03! But there is no reference to this location in any variable.My j2sdk is installed in C:\j2sdk1.4.2_03.
Currently ,
CLASSPATH =".;C:\Program Files\eclipse\plugins\org.eclipse.swt.win32_2.1.1\ws\win32\swt.jar;C:\cygwin\usr\share\postgresql\java\postgresql.jar; C:\Program Files\Database Report Writers\DB Drivers\pg73jdbc.jar "
And PATH = " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\cygwin\bin;C:\Program Files\Common Files\Adaptec Shared\System;C:\MSSQL7\BINN;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\Program Files\cvsnt;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\tools\maven\maven-1.0-beta-11-SNAPSHOT\bin "
Please help.
Ciao,
Vipul

Problem with audio setup of IDT

Sorry, if this question isn't for this forum, but I need the solve of this problem
HP Pavilion dv6-6c53er.
Hello, it's me again.
My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
So, the problems are:
1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
2) What Can I do with problem with Skype and outs?
3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
And problem with Traktor is:
I can't to set each earphone out for playing each deck in Traktor.
Help me, please with this problems!
Yours, Xardas007

I have the same problem. I was however able to install 9i. Then I was able to use the 9i Installer to install the 8.17 software. But I can not run the 8.17 Database Configuration Assistant. It will not start same as the 8.17 setup.exe.

Problem with keyboard setup.

Hi
I am having problem with my keyboard setup. When clicking the option key (alt) and a number key no symbols appear. Instead the computer gives away a beep. If I view the Keyboard viewer the symbols appear correct. I have created a new user and tried logged in as the new user. Then the symbols appear instead of the beep. What strange settings can I have made?
Thanks for your help.
/Erik

Yo
I seemed to have a folder in my users Library folder called KeyBindings and a file in there called DefaultKeyBinding.dict. When removing this everything was back to normal. So seems as though the file was steeling my option key mapping. Not good.
/E

Problem with Multiserver setup in LMS4.01

Hello,
we have a problem with a Multiserver setup in LMS4.01.The devices that should be manged in the slave server stay in unmanaged state.
Our goal configuation is:
Server-1 = DCR-Master
Managed devices = 4200
Apllications = RME, CM, IPM
Server-2 = DCR-Slave
Managed devices = 150 (this number is a subset of the 4200 devices on Server-1)
Applications = DFM + HUM
We created on the master-server a user-defined group with 150 critical devices and we configured a Master-Slave Setup as described in the documentation:
- Master Server - creating a peer user
- Slave Server - Creating a system identify user (with the same name/password as the peer user on the master server)
- Master + Slave Server - Creating certificate on slave + master server and import these certificates to each other
- Master Server - Enabling DCR-Master mode
- Slave Server - Enabling DCR-Slave mode
- Slave Server - Enabling at device allocation settings the functions <Inventory Mgmt>, <Fault Mgmt> and <Performance Mgmt> only
- Slave Server – Creating policy configuration for device allocation for the user-defined critical device group only
When I create the policy configuration on the slave server I can see all devices in the DCR and I can also see the user-defined group with the critical devices that I created on the master server. So there shouldn't be a problem with certifiactes or the peer/system identify users.
Now I would expect that I see the 150 imported devices in the slave server in a managed state. But when I check “Inventory> Device Administration> Manage Device State” in the slave server I see all 4200 devices in unmanaged state. And this looks wrong.
Any ideas about it?
Thanks + Regards
Hendrik

Hi Tomasz,
Nope. No solution from anyone. I had been fighting with it with several SAP Notes but not yet success. I opened a ticket with SAP but no solution yet.
I think it caused by our already existing SSL and integration with federated Portal.
I don't have any system with the same software to compare.
I followed all related notes by the book. My system was upgraded from BW 3.0B to NW04s SR1 SP Stack 10 then new Java add-in installation with usage BI-JAVA & EP SP Stack 10 .
I will conquer this some day- Wish me luck!
Thanks.
Mimosa

Volume problem with Desktop Theatre 5.1 DTT2200

Hi,
I'm experiencing problems with my Desktop Theatre 5.1 DTT2200's volume. It goes up and down with no sense. Doesn't matter if I'm watching a movie, listening to music, playing games or whatever. The speaker system is connected to a SB Live! Sound card but even if I disconnect it and I use the onboard sound plugs it is still happenning the same problem.
Can anyone help me with this?
Thanks in advance!

I Have the same problem, really a shame cause the soundquality is very good, but if i have too keep adjusting the volume it's not really serving it's purpose.
The potmeter of the volumecontrol is malfunctioning. You could try disasssembling it and clean it but that didn't work for me till yet. Best is to replace the potmeter but it is impossible to find a replacement. I'm told it's a very (too) cheap component unsuitable for frequent use so i think Creative shouldn't had used it in the first place. I'm told it's a ct. component fot the far east.
I contacted Creative but they can't supply me with a substitution, either a potmeter or volumecontrol.
The volume control can't be found elsewhere because Creative designed their own connector i think.
Guess i have to annoy the crap out of myself before i buy another set.

Timezone problem with Desktop 6.2 calandar and outlook 2007 after HotSync

After recently being upgraded to Desktop 6.2 I have a problem with Hotsync Palm-calendar and outlook 2007.
When I create a new appointment in outlook 2007 and next do a HotSync it is stored in PalmTungsten-E2 calendar with a timezone CEST (=2 hours earlier than it should be).
At least I won't be late for these appointments, but its a bit annoying.
I already tapped and untapped the box -New events use time zones- in the Calendar Preferences, but that does not help.
Louis
Post relates to: Tungsten E2
This question was solved.
View Solution.

Thanks Colapop for you suggestion.
I had already tried that option and it gave no good result.
Yesterday I bought KeySuite from Chapure and now everything works fine again.
I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
Cheers
LouisK100

Problem with Desktop sync with Torch 9810

I recently acquired a Torch 9810 (upgrading from a Curve 8900).
Sometimes, when I try to sync the Torch using my Macintosh (OS 10.6.8) I have the following problems:
1. When backing up calendars the desktop software warns me that if I continue 487 entries will be deleted on my desktop computer. But I have the Blackberry and my Mac iCal program set so as not to delete old files. There seems not to be an option just to update the Blackberry and leave my desktop computer alone. The choice seems simply to sync or not to sync. How can I ask Blackberry Desktop to modify my handheld device ONLY?
2. If I try to cancel a "sync" functions, sometimes the program just hangs, then I have to use "Force Quit."
3. Then when I reconnect the Blackberry the Mac OS tells me the Blackberry memory is corrupted and I should re-format the disk.
I did not have this problem with my Curve 8900. What is happening? How can I prevent this from happening again?
Eric

hello,
there is an article in the public knowledge base :
http://www.blackberry.com/btsc/KB14924
"Error Encountered 0x8004FD2B, Check Documentation"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Problems with desktop/app sharing/viewing through conference

We have a problem with viewing shared desktop/app with external contacts in a conference. We're able to share/view desktop/app directly with an external users, but not in a conference. We get the error message: "Sharing failed to connect due to network
issues. Try again later."
If we're using the web app on the same computer where we have the problem, we're able to view the content in the conference.
It's working fine internally, it's also working fine when users are outside of our office.
All other functions in Lync are working fine.
We have 1 standard Lync server and 1 Edge, we don't have a reverse proxy but multiple IPs with port forward to corresponding ports on each server.
How does the Lync client connect the shared content?

To Fix your issue, you can follow below steps
A common root cause for this error occurs when required ports are not available. Begin troubleshooting by verifying required ports.
Public --> Edge server:
TCP/443
UDP/3478
TCP/50,000-59,999 (Outbound only)
Determining External A/V Firewall and Port Requirements
Topologies for External User Access
From the Front End pool to the internal Edge:
TCP/5062
TCP/443
UDP/3478
From the internal Edge to the Front End Pool:
TCP/5065
TCP/49152-65335 (Inbound/Outbound)
Ports and Protocols for Internal Servers
From the internal Client to the internal Edge:
TCP - 443
UDP – 3478
Also you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Problems with email setup on my E72

I have problems with my email setup, the phone will not notify me when a new email arrives. I have had the unit in the shop, tried to get help form my service provider, have sent it back for repairs and it still will not work properly. The repair centre told me that it does have the latest software on it and said it should work fine. It,s a brilliant phone but this so frustrating. I would appreciate some help to get this sorted. Thank you, fuzzy2

Check homescreen applications-> e-mail notification.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problem with Desktop Setup

Similar Messages

Maybe you are looking for