Problem with Dreamweaver Crashing When Trying to Resolve Bad Image URLs

I have consistently had this problem ever since using Dreamweaver CS4 (3-4 years). I constanly hand code HTML emails using Dreamweaver (about 100-150+ / yr), when I start a new email, becaue of the nature of the emails, I have to use absolute URLs for the images contained within said email. Usually when I go to create a new email, I pick up an old one, to grab keep the same basic template and then do a find and replace to update the URLs for the images contained within the email. The emails and image assets are kept on a web server and separated out with different directories, for example: mysite.com/email1/ and mysite.com/email2/. If I fail to upload all of the images from email1 into email2's directory or is I mistype the new URL Dreamweaver gets stuck when it tries to resolve the updated URLs and it can't find the images. Quite frankly, I don't need dreamweaver to resolve the URLs for images, I don't use design view and probably never will, it automatically pulling the height and width attributes is conveinient but not neccessary. Dreamweaver will stay hung up (completely unresponsive) indefinitely when this happens, and I usually have to kill the process via the Task Manager to even get it to shut down. Then when I restart Dreamweaver it rebuilds the site cache which takes at least 5-10 minutes, I have a very large internal developement server. This has caused me an absolute ton of frustration and lost time. I was hoping someone could suggest a solution.
A couple of ideas I have kicking around as possible solutions but don't know how to do:
Killing the resolving of the absolute URLs (I can't find this in the Dreamweavers settings, I haven't checked the config files themselves though)
Disabling design and split view (last resort)
In case this helps my, system info:
Windows 7 64-bit
Intel Xeon W4530 @ 2.8 GHz
12.0 GB of RAM
Abobe CS4 Master Suite
Thanks,
Jason

Thank's for replying. Since the first time I put in this answer, I've done a couple of tests to see what actually would go through the exporting process in iMovie and it turns out that I can export videos created using my webcam along with videos with slideshows.
The only problem is that with the slideshows (which is the type of video I'm attempting to export now), if I'm using all still images/pictures, I can only export videos no longer than about forty five seconds...anymore than that and iMovie crashes.
So my new question is...do you or anyone else know why this could be and how I could fix this problem? Also, I'm not very tech savy and this is the first Mac I've ever owned so more details and instructions in the answers would be greatly appreciated. Thanks.

Similar Messages

Problem with imovie crashing when trying to import clips

I just purchased an imac, connected my video camera (panasonic hd camera) and opened imovie, it shows my two movie clips in the preview window within imovie and then crashes (says relaunch, quit or ignore). Any suggestions?
Should I just install the drivers that came with my video camera? I thought Imovie would just detect my camera (which it does) and then work properly without crashing the program). thanks for the help!

This worked for me with a Panasonic HDC-SD9:
Check Software Update under the Apple logo in the menu bar. If you see Quicktime 7.5 update, install it. After installation, go into Software Update again. If you see iMovie 7.1.2 update and iDVD 7.0.2 update, install them. Try downloading clips again. If it still does not work you will have to reformat the card which will destroy any clips. Good luck!

I reset my iPhone5 and I'm putting my ID and password in and it says there is a problem with the server when trying to restore all my information with iCloud backup. What do I do?

I was having several problems with my iPhone5, apps crashing everywhere, nothing working. My father who is very tech savvy told me we would have to restore the iPhone using the iCloud. So I went to settings, erased all my stuff and got the grey starting screen. I got up to the point where it says to enter your Apple ID and Password and I couldn't remember so I went on Apple.com and changed my info so I could remember it no matter what. I got the email saying that my info has been changed and accepted and all that but now when I put the information in its says that there is a problem connecitng to the server.
Help!

http://www.apple.com/support/itunes/contact/
In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552

Problems with iPhone freezing when trying to answer while on another call?

I am wondering if others are having the problem with your iPhone freezing when you are on a call and another calls comes in. I have had this problem repeatedly. If I try to answer a call while on another call, the other caller can not hear me. when I try and hang up the call...iPhone freezes and disconnects ALL calls.
I do not have a problem if I initiate BOTH calls for a conference call. I am hoping that Apple is aware of this issue and are working on a fix in the next update. Whenever that will be???
Oh well, if you are having this problem and know how to fix it...please let me know. Thanks

I have noticed that during or at the end of a conference call when one party hangs up all parties have always been disconnected. I can tell you that if this is the way it works normally, this is not the way is should work. This is a pain in the butt when it is necessary to call one of the parties back since that party is also trying to call you back. You both get a busy signal.
I do not have a problem answering a second call during a time when I am on a first call. It will place the first call on hold and I will only be talking to the second party. It should work that way. My iPhone works that way.
It should also allow you to add the second call to the first call through the 'merge' feature so that both the first and second calls can be joined together. My iPhone works that way.
My previous Treo worked great on these situations but I do have burps with the iPhone.
I think that the problem is with the iPhone and AT&T interface in these conditions.
I would provide your comments to Apple via:
http://www.apple.com/feedback/iphone.html.

I am still having LR4.2 problems with app crash when launching plusloading images 'losing the source

this has another thread, but some of the entries are older.. so I am asking again. I entered this information last night.
I am having intermittent app crashes on booting lightroom4.2. It happens whether I just open it, or if I import pictures. the second try is usually successful.
Also, lightroom 'loses the source' while importing images. After all the thumbnails load, it loses the source.    This was a problem previously only with selecting images to import, nwt it happens all the time on import.
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             lightroom.exe
Application Version:                           4.2.0.11
Application Timestamp:                     505a0579
Fault Module Name:                          StackHash_cb7b
Fault Module Version:                        6.1.7601.17725
Fault Module Timestamp:                  4ec4aa8e
Exception Code:                                  c0000374
Exception Offset:                                00000000000c40f2
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  cb7b
Additional Information 2:                  cb7b5c306c9a7a4763a64680327d8e94
Additional Information 3:                  1bc0
Additional Information 4:                  1bc0cd5fe204d306a476aa9208cad465

wellllll. its been ages and nobody ever offered a solution. i was ready to tear my hair out with computer crashes and other issues...after the update to LR 4.3 a lot of my problems ended abruptly, but i still have the lost source issues occasionally.
most of the time i can exclude a row of images or include only a row, but i cant select a few at random to be imported.

Calendar app crashes when trying to view jpg image off calendar event.

i run my electrical buisness off the calandar app and it synces with 5 other people including myself. we scan an image(work order) attach it to the event in the calander then everyone can download it and view it anyware instantly. my problem is that 1 out of 5 times it will crash as soon as you tap the attachment in the calander event. it crashes back to home screen. any suggestions?
i really dont want to go back to windows operating system. i convinced everyone to go apple and now they are on my *** about this issue. THANKS

An obsertation: I have what appears to be an all-day event on April 1, that is a note that it is April Fools Day. However, this note is part of a holidays calendar that I subscribe to on my iPad. The holiday entries are an actual subscription, not individual entries on the calendar.
I have not had any Calendar crashes with this April 1 entry at all. As Skydiver said, it might be a DST problem, but it seemed strange that some folks are having crash problems with all day entries on 4/1 and some are not. Maybe this subscription entry doesn't count as an all day entry?? Dunno.

Problem with CS5 crashing when inserting or deleting page

I have a legacy file (educational textbook) that was created in CS2 and has been edited and updated over the past couple of years with no problems. The file is approximately 360 pages with around 30 illustrations, a ToC, and large index. When updating the material today, I went back to insert a page due to overflow text and InDesign crashed. This happens every time I try to insert or delete a single page. I can insert a single page on pages i through viii, but when I try to insert a page beginning at Sec2:1 InDesign crashes. I can open and close the file and edit it anywhere with no problems.
If I insert 2 pages at a time, it works fine and I can flow the text into the page. But, when I go to delete the extra page I don't need, it crashes. It doesn't seem to be specific to any particular master page in the file. I tried several times to export to an IDML file, reopen and save it to an InDesign file but the same problem occurs.
The same thing happens with the file on the same verson of InDesign that is on my laptop. This problem does not occur with other InDesign files that I have created in the past. I need some help. Thank you!

I think Steve was looking for a bug that affects new Macs, which we can rul out at this point.
I suspect some corrupt text of some sort, but that's just a guess. Ther first thing I'd do is make a copy of the file for backup, then start trying to find the problem.
You mentioned this was a CS2 file originally. What was the last version, and how much editing has beeen done in CS5? Do you have the old file and can you add pages in that version?
In the CS5 version, are you able to select half of the pages at a time in the Pages panel and use the Move Pages command to move them to a new file (you need to make the new file first)? In the new file, before you move the pages, rename Master Page A to something that you didn't use in the file that is giving you trouble so that it isn't applied to any of your pages when they are moved, and open the Paragraph Styles panel flyout menuand choose Load Styles. Load the [Basic Paragraph] style from the problem doc and replace the existing one, then you are ready to move the pages.
If you are able to move the pages, move half the pages into one file, and the other half into a second file. Save both files with new names. This is a divide and conquer search technique to see if we can isolate a problem page. With each half document, see if you are able to add or delete a page. Hopefully the answer will be yes for at least one half. If it's yes for both, move the pages from one of the new docs into the other to recombine them (you may have broken a text thread when moving the pages, so check for that at the point where the two were originally separated), save As with a new name and you should be good to go.
If only one half is working, repeat the exercise with the bad half, moving halves to two more new files. Continue to do this until you are down to a single page from the old file, then remove half the text (or illustrations) and try the test again. You should be able to isolate a problem very quickly this way -- about 8 steps to get a 360 page book to down to one page.
If NEITHER half doc works, it might be a corrupt style (and that may be the problem even if one of the half-docs is OK if that style is rarely used and doesn't get imported). When you move pages to a new doc, the styles will travel with them unless there are same-named styles already there. If you suspect a bad style, you should make a new blank doc, then define, not load, duplicate styles for all of the styles in the problem file, before moving the pages. This may be a lot of work, so an easier alternative might be to place your cursor in each story, then export that story to InDesign Tagged Text (If you ask over iin scripting, someone may have a script to export all the stories at once). You can then place the tagged text into a brand new file and see if that works.
Keep us posted.

Problems with a Restore after trying to resolve problems with Yosemite

Hi there,
I stupidly upgraded my OS to Yosemite without waiting a month or so for any problems to be fixed.
After the upgrade which went really well, or so I thought, all my apps worked, and I was very happy with it until I switched to Bootcamp to to find that I didn't have the option to select Bootcamp as startup. Although I had the BC icon on my Mac desktop, and I could access it from my Mac, I couldn't switch over.
So I did a restore to a timestamp just before my Yosemite upgrade - and this went... sort of well... I panicked when I thought I'd lost all my 10's of thousands of emails but the rebuild went well. The problems I have with my restore are that some of my applications are missing - I just get a '?' in the dock and it tells me what the apps are when I hover my pointer on them. The apps are;
System Preferences
Safari
Preview
Skype
Vox
VLC
uTorrent
Tunnelblick
Quicktime Player
My Pages documents no longer open - it says The required index.xml file is missing but it does manage to show me a quick view in spotlight
I have seen on this forum that this can be due to having more than one version Pages but I can only find one version in Application/iWork '09
I can't see why Safari wouldn't be present because I thought it was part of the operating system, as in Preview as well. I thought that maybe they are still on my Mac but need some sort of reset or something...
My bootcamp problem has been resolved by the way and I can switch to my Windows apps that I use regularly.
So I would really be grateful for help in restoring the apps above. I was thinking that apps I downloaded like Skype and Vox say, I can download again, but maybe I need to delete files etc. before reinstalling these missing ones.
Many thanks, Maz

Hmmm, problem resolved by restoring forward to my Yosemite backup.
It's the lesser of two evils and I have my Windows apps on my old PC...
So come on Apple and get this fixed - it's absolutely disgraceful that this should happen... absolutely disgraceful!
Maz

Dreamweaver CS6 - After Yosemite upgrade, Dreamweaver crashes when trying to go "Live". How do I fix this?

Upgraded to OS 10.10.1 (Yosemite) and now the "Live" function in Dreamweaver (CS6) crashes the software. Help!!!! How do I fix this???

You could try clearing the program cache and/or restoring preferences...
Deleting a corrupted cache file
Restore preferences | Dreamweaver CS6, Dreamweaver CC
The "Nuke it from orbit", you don't generally do this until other options have failed, option is...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Problems with "corrupt" ipod when trying to sync

To elaborate on the title
Ever since downloading itune version 11 (and something) I've had a complete nightmare. Kept getting lots of technical warnings that I didn't understand. After reading lots of websites etc of people with same problem, I ended up having to do a system restore from an earlier backup. Unistalled all apple products and reinstalled version 10. Then had to reimport my whole library and spent days tidying this up.
I have now just come to re synch my ipod to add some more music and i tunes has deleted the whole contents and then failed to copy music to it. It now says that the hard disk on my i pod is corrupt and I have to restore the device. Everytime I try and do this, i tunes reports that same message and so won't do the restore.
On the settings on my ipod, although there is no music, videos etc it says that the disk is full and there is no spare space.
HELP!!!! I've now lost use of my favourite gadget that i use everyday and no idea what to do. I am extremelly angry with apple as it all seems to stem from an update that has been reported to be flawed. I am not computer literate and every error messgae just seems to lead to ten more - none of which I have any idea what they mean.

IPOD_Control/music/F20/WWJT.m4a
that's a corrupt music file on the ipod.
just doublechecking ... by restoring, did you mean you've used the procedure described in the following document?
Restoring iPod to factory settings

Problem with elementary streams when trying to export

I just purchased the MPEG2 plugin from the apple store because it said:
"The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved together into one track) and non-multiplexed (a.k.a. elementary) streams. It is perfectly suited for professional and semi-professional content creators with projects such as:"
My movie is already encoded to m2v with a separate audio file. I wish to export to mpeg4 for internet distribution.
Now when I open the player, It does not give me the option of opening both audio and video components of my project.
How do I get the program to let me add both parts of the project to the player in preperation for export?

As you have discovered QT and that mpeg2 component have a number of llimitations when working with audio and video mpeg streamsl: QT Mpeg Limitations
Try using this freeware to deal with mpeg streams: Mpeg StreamClip. Since you already have the playback component the freeware should allow you to export to other formats like mp4 with both sound and video in the export.

Problem with IE8 crashing when opening a PDF

I have run all the troubleshooting to get IE8 to stop crashing. I have ensured that Adobe is "Enabled" for add-ons. I have also gone into Adobe and deselected "Allow Fast Web Access" under Preferences>Internet. I have had not luck and am very frustrated. Can someone help?

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

Problem with ID parameter when trying to view survey responses

Hi,
I am creating a survey tool for Sharepoint where the admin can initially put in a number and description for the project he wants the survey to be created for. Then the admin sends out the link to the survey for the questions to be filled in by a customer.
The link directs to a custom form I created in Sharepoint and it is composed of the link to the .aspx page and the ID of the individual survey. I created this link in SharePoint Designer:
<a href=http://mysite/sitecollection/Lists/Survey/CustomEditForm.aspx?ID={$thisNode/@ID}></a>
Unfortunately this link only works for the admin account but not for other accounts I tested. I think it is because of the wrong parameter because ID is not a global variable and only works for the user who created the survey. Is there any other variable I
could use to send out the correct link?
I guess I am just looking for another (custom) parameter that can be passed to my custom form.
I've tried this but the solution did not work for me: http://support.microsoft.com/kb/972225
Thanks in advance for any help!

Hello,
>every user is able to edit every response of any other user as well.
Yes, this is true. If user is having contributor rights then they would be able to edit other responses as well. You have to create custom event handler to stop this, where you can cancel the event if someone tries to edit other response.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Outlook crashes when trying to attach file. Excel crashes when trying to save. (Possibly Connected)

A colleague is trying to attach a file to an email by clicking the attachment icon and it crashes, however it does not crash when you drag and drop.
When they try to save an excel file by going New File > Save as, it crashes, but when you right click in a folder or desktop and create new excel and then work on it and save, it works.
I already uninstalled, install compatibility pack again, reinstall, updated, disable all add-ons and ran them both in safe mode and it still crashes. Any ideas?
Thanks in advance.

'''eshbach''', Did you try updating the Trusteer Rapport software and did it fix the problem with Firefox crashing when downloading a file or saving a page?
'''mike_berry413''',
If you don't need the Trusteer Rapport software, you can remove it. If you need the software, you can try updating it or else temporarily disable it to see if that stops the crashes.
For the record, here is the crash report from the ReportID you posted:
https://crash-stats.mozilla.com/report/index/bp-fcd33048-3845-45f3-907c-9c5c62110930
Firefox 7.0.1 Crash Report [@ rapporttanzan7.dll@0x620c ]
ID: fcd33048-3845-45f3-907c-9c5c62110930
Signature: rapporttanzan7.dll@0x620c

Firefox crashes when trying to attach a file to an e-mail.

Foxfire crashes when attaching a file to an e-mail

'''eshbach''', Did you try updating the Trusteer Rapport software and did it fix the problem with Firefox crashing when downloading a file or saving a page?
'''mike_berry413''',
If you don't need the Trusteer Rapport software, you can remove it. If you need the software, you can try updating it or else temporarily disable it to see if that stops the crashes.
For the record, here is the crash report from the ReportID you posted:
https://crash-stats.mozilla.com/report/index/bp-fcd33048-3845-45f3-907c-9c5c62110930
Firefox 7.0.1 Crash Report [@ rapporttanzan7.dll@0x620c ]
ID: fcd33048-3845-45f3-907c-9c5c62110930
Signature: rapporttanzan7.dll@0x620c

Problem with Dreamweaver Crashing When Trying to Resolve Bad Image URLs

Similar Messages

Maybe you are looking for