Problem with drop user

Hi,
I have à big problem when i try to drop a user my session is hanging.
After many minutes the user is'nt dropped.
An idea.
Regards

use the following command:
drop user <username> cascade:

Similar Messages

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problems with dropped frames in FCP 4.5 Log & Capture

Thanks for the advice on my previous post regarding sound problems - those are now sorted, but I am having problems with dropped frames in Log and Capture. I am using FCP 4.5 with OS X 10.4.10 on a Powermac G4. CPU 867 mhz dual processor. L2 Cache 256 kb, L3 cache 1 mb. Memory 1g. Bus speed 133hz. I am capturing from a Canon XM1 via Firewire. The scratch disk is a 500gb Seagate FreeAgent USB 2.0, 7200rpm.
Basically, the video and audio are fine while playing back in Log and Capture and I can control the device, but any attempt to capture, whether Capture Now or Clip result in a very jerky picture and aborts with dropped frames after a few seconds. The sound is ok for the few seconds before it aborts. There do not appear to be any problems with the timecode.
My capture preset is DV Pal 48hz.
Any advice or pointers gratefully received.
Thanks, Ally

Well quite. I have just tried it in the internal hard drive and it works fine now. I am going to have to capture everything to my small hard drive and move it across to the external. Then, when I have finished I am going to bang my head against the wall and buy an external HDD with Firewire.
Thanks,
Ally

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

Problem with dropped connections...

Hi,
I'm having a problem with dropped connections. Let me explain...
I have a computer with Windows XP SP3 where I have installed Toad, PuTTY and Oracle 10g client. I need to connect to several database and Linux hosts and have a strange problem. What happens is the following:
1 - When I arrive at a customer location, I boot up my computer (I'm not using hibernate or standby) and plug-in to the network.
2 - After I login to Windows, every session in PuTTY (to Linux), SQL*Plus or Toad (to database) gets dropped after only a few seconds.
3 - I reboot my computer again, and everything works fine.
I have no explanation for this beahavior. This happens across different customers, database versions and Linux OS kernels and versions. It seems to be related to something in my computer that is fixed on the 2nd restart.
Has anybody experienced any similar problem?
Thank you!

pmcatarino wrote:
I plug directly at client's site.
And I can access the web and messaging on the first reboot... the only thing that appears to be malfunctioning is putty and toad as I stated above.
Edited by: pmcatarino on Oct 24, 2008 6:25 PMDoes that mean you can ping to the server without problem when putty and toad having problem?
If you install an Oracle client on your machine and configure TNS, will the sqlplus drop as well? Or download and install SQL Developer, see if SQL Developer having any problem connect.

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Ethernet Problem with Multiple users on same Mac

Hi, sorry i advance for my english. I am writing from italy.
I have an imAc with 2 users profiles on it. one profile is administratoe, and the oter a standard user.
I also have a time capsule configured to connect to my network with the ethernet cable. the cable is plugged in the wan pot, the configuration is "bridged" and i use as a router a linksys wifi router.
well. suppsung that i am logging in with one of my users and access to time capsule wirelessly, it shows me the disk content.
i then swith to the other user without logging off the first one and then access time capsule where i see the same folfder and i can access it. so everything works fine.
in the case i connect my mac with ethernet (disabling airort) to my linksys router, ifuser 1mounts time capsule, user 2 can't access it if user 1 does not unmount.
why so?
i need to switch from user 1 to user 2 without logging off, and i don't understand why it works wirless and not with ethernet..
thak you
paolo

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Urgent - problem with multiple users on same page

Hi all,
I have got an big problem with my app:
when several users are using the same page, the action launched by USER_A affects the page displayed and used for USER_B.
If there is only one user using the page, there is no problem at all.
The webapp is deployed on Tomcat or JBoss and the problem remains the same on both.
Thank you for your help.
PS: I am not accurate because I don't know what to paste here.

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Problem with transfered user sessions from a 10.4 system

On my new MacBook pro with ML, I tranfered the user sessions of my previous mac (power book G4 working with OS 10.4).
With these "old" users accounts, part of the trackpad features (like scroling up and down with 2 fingers) does not work, whereas it is working with new users.
Any idea on how to solve this?
Thanks in advance

That was a good idea, I tried to delete the com.apple.finder.plist and the com.apple.systempreferences.plist but that did not work.
Eventually to solve the problem, I transferred all the files I needed to a session created with the new system. I'm waiting a week or two just to see if I have not forgotten something important and then I will delete the "old session".
Thanks anyway for your help.

Problem with forum user name

I appear to have been 'bitten' with the user reset problem. My original id is now "nealeh-Y42Jq8" while my original "nealeh" now appears as a brand new user. I recall others having this problem in the past. How do you get it put right?
Cheers,
Neale
Insanity is hereditary, you get it from your children

I noticed that, as was going to point you to the Forum Comments forum, where Adobe-Admin (John) would be able to help you, BUT the forum was so very wonky today, that it was taking me six log-ins, just to read the PrE forum.
It looks like you have the "real" Neale back, and I'm glad.
For the fix, just post to the Forum Comments forum, with your log-in details (sans PW). John will fix things for you.
Glad to have you back!
Hunt
PS - the UK was not the only area of Earth, that was smurfed by the Adobe Forum issues - the US was hit just as badly, and many experienced similar to you.
PPS - in a few days, I'll be terrorizing Mayfair, and will hoist a pint, or two, in your honour.

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

Problem with drop user

Similar Messages

Maybe you are looking for