Problem with ending user session in backend with BSP

Hi,
I'm having this strange problem. When I use the standard SAP Budgeting Maintenance BSP application for Enterprise Compensation Management, whatever sessions I have opened doesn't close it automatically in the backend system when I close the BSP application. It leaves my sessions open for a few hours.
I'm using the standard BSP functionality for Budgeting Maintenance, without any sort of modifications whatsoever.
Anyone else have this problem? Perhaps there's a OSS note out there somewhere.....
Thanks.

Hi,
the problem is, that the system gets no session exit.Are you are calling the right page for the applifcation entry point?
If yes, try the following:
Go SE80, have a look at the BSP-Applidcation 'SYSTEM' and the instructions in the page 'session_single_frame.htm'.
Copy the whole BSP-Application in your namespace.
Now, when leaving the Budget-Application, a sessionexit-page will be called, which correctly terminates the session.
Best regards,
Stefan

Similar Messages

How to end user session correctly as sys or system user

Hi,
Database version Oracle 10.2.0.3
We have to end user sessions to update database content. We cant stop/shutdown the instance but we have to assure that some users are not logged on.
So we are looking for a solution to end some arbitrary user sessions as sys or system user without using the KILL USER SESSION option. We want to assure that the user sessions end correctly.
Is there a possibility or a command in Oracle 10g to end a user session correctly ?
Thanks for your assistance.

http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#i2053602
I think DISCONNECT SESSION Clause is what you are looking for.
Let us know if this is not the case.

SA520 web access problem, all admin users sessions appears active when it is not true

Hi, all the users for the management access to my SA520 are blocked via web, all the admin users sessions aparently they seem active, and when i do click on the "continue" button these sessions does not terminate. I guess i have to reset the firewall, but my question is if anybody has the same problem with this device.

Hi Luis,
What firmware version are you running? How frequent do you see this occurrence?
If possible, when you start to see this issue before all the admin sessions are reporting active,can you provide us the debug logs from your SA 520 so that I can forward to the development team to investigate? We are tracking an issue with a customer, but his device takes 3-4 months to show the symptoms you describe.
To get the dbglog from SA520, login through web UI and in the browser enter the following URL:
https://LAN_IP_address_of_SA520/scgi-bin/dbglog.cgi
These logs will store password, so please remove any sensitive information and passwords. Also if you are not comfortable posting the dbglog on the community, you can send it directly to me through private message.
Best regards,
Julio

Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE

Hi folks, this issue has been challenging.
Acrobat Pro CC install
W7 X64
Deployment went ok after the code was worked out, but.....
We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
“Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
Thanks eh.
GPLabs-Acrobat Reader default .PDF file open
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Adobe Acrobat XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Acrobat                                      Disabled
Adobe Reader XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Reader                                      Disabled
Adobe Reader XI/Preferences/Startup
Policy         Setting       Comment
Enable Protected Mode at startup                                                Disabled
Preferences
Windows Settings
Registry
ELUA=1 (Order: 1)
General
Action        Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path    Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name        ELUA=1
Value type           REG_DWORD
Value data           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                No
Remove this item when it is no longer applied                                                         No
Apply once and do not reapply                                                                        No
EULAAcceptedForBrowser (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                           No
Remove this item when it is no longer applied                                                                 No
Apply once and do not reapply                                                                                             No
ELUA=1 (Order: 3)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                        ELUA=1
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                          No
Remove this item when it is no longer applied                                                                   No
Apply once and do not reapply                                                                                  No
EULAAcceptedForBrowser (Order: 4)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 5)
General
Action                                                                           Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 6)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Acrobat\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 7)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
User Configuration (Enabled)
Preferences
Windows Settings
Registry
ELUA (Order: 1)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                    REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
ELUA (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                     REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
.pdf (Order: 3)
General
Action                                              Update
Properties
Hive                                                  HKEY_CURRENT_USER
Key path                                           software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
OpenWithList] (Order: 4)
General
Action                                                                                     Update
Properties
Hive                     HKEY_CURRENT_USER
Key path              Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
Value name        (Default)
Value type           REG_SZ
Value data           "AcroRd32.exe"
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Control Panel Settings
Folder Options
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
pdf (Order: 1)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
pdf (Order: 2)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No

Hi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4   Installation Workflows — Enterprise Administration Guide
Regards,
Rave

Reader X problem - Accept End User License Agreement

I have recently updated to Adobe Reader X.
I use Windows XP (SP3) and Internet Explorer.
Now, when I attempt to read a .pdf file a Reader X message pops up with the following message;
"Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement".
I do not have Adobe Acrobat, I am using the free Adobe Reader X.
Why am I getting this message and what can I do to stop it so that I can again read .pdf files.
This never happened with the previous version of Adobe Reader.
How can I go back to the previous version?
Thanks
Gryphon2345

I have the same issue reported by Gryphon, however this response is an odd fix IF it were to be available to me.
The "Enable Protected Mode" is a new feature in Reader X that allows for a "sandbox" security layer in Reader. You can read up on that here: http://blogs.adobe.com/livecycle/2010/11/technical-details-of-adobe-reader-x-protected-mod e.html
While it does prevent you from opening up certain PDF's directly, we've only seen this when opening up files over our network. The message received was an "Access Denied" issue, and turning this off got rid of that.
In my scenario, I originally attemtped to update Reader 10.0.1 to 10.1.0 using SCUP and the published update. This caused my custom setup to be overwritten (customizations included default acceptance of license agreement, removing Auto Updater, and disableing Protected Mode). I then had to re-create a custom installation using the Customization Wizard with the 10.1.0 MSI file from the Adobe FTP site. After running this, I'm getting the above error now on machines that never had Acrobat.
That being said, Alex's suggestion of turning this on or off is not applicable b/c it's disabled based on my custom installation. The box is grayed out and I can't even enable/disable it anyway.
Anyone out there have a better solution?
UPDATE: It appears that Alex is correct. I removed the registry entry bProtectedMode from HKLM\Software\Policies\adobe\10.0\featureLockdown and was able to open all files w/out the message. However, I'm not 100% sure what this will do to other PDF files as we originally disabled this so that certain files could be opened. So far, this user has been ok with Protected Mode ENABLED, however, in a recent test, I was blocked from opening a web PDF b/c of it on my PC at my desk.
also appears others threads have been started (http://forums.adobe.com/message/3767559#3767559) so not sure when this may be looked at or answered.
Message was edited by: alarose20

How to delete last user session from backend SQL query?

Sometimes user session gets closed between some work by any reason.
When next time that user logs to P6, he gets some error or particular functionaly dosen't work for that user or system hangs.
In that case if i decided to clear last session history of that user from database, how to write SQL query?
I don't want to delete all user sessions from table USESSION and USESSAUD, i simply want to delete last user session of particular user (E.g XYZ).

I am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta

Problem with BSP MVC

Hi all,
I had a bsp application which is now running live in the organization. Recently, I got a problem report back from user, which is causing data loss.
After the support team check the problem and found out the source of the problem. Let me briefly state the problem here. The application is using bsp mvc and it is stateful.
First, when a user open the application in IE, it is a timesheet entry application, first page will display the time entry of that user for current month. let say the default selected month is September. then if the user wan to compare the entry with previous month, then he will open a new window (ctrl + N) or new tab (ctrl + T), then open the application again. Because of using SSO, the application will not prompt user to login again and will directly lead user to the time entry page. then the user change the month to August for the second new page.
after the user change the month to august, it will refresh the model that hold the data of the month. means the model now carry August calendar. then the user go back to the first window or the first tab with september time entry, he try to add in new data into that time entry, and save. when it is saved, the september data will go into the August data not go into the September data. this causing data loss in September.
If I tried this again with not using (ctrl + N) or (ctrl + T) but is open another new IE broswer instance, then it wont give this problem at all. because it create another new model to hold the calendar data. It work fine as long as the user not open two or more windows or tab in a same IE instances.
Does anyone here meet this problem before or could provide any suggestion to solve this kind of problem? I cant simply changed the application to stateless because it already using worldwide and it will cause a lot of problem. Sorry if my question here was not clear enough.
Thanks you. (reward point will be given for helpful answer.)

Is there anyone can understand my problem?
Thanks you.

Problems with BSP application using HTTPS in EP6.0

We developed a custom BSP which uses HTTPS protocol and HTMLB tags. The BSP page has a date field (htmlb inputfield of type date..which allows the user to pick a date). If I run this BSP in its own browser window, clicking on the date field will display a calendar. However, if I run this BSP as an iView in the portal (we use EP6.0) and click on the date, I see a Javascript error message (in the browser status area) that says "access is denied" and the calendar isn't displayed.
Also, this BSP is a stateful application with the portal integration flag checked. However the DSM terminator is not invoked when I close the iView.
If I change the BSP settings to use HTTP, I can run it as a portal iView without any such problems. Has anyone experienced this and/or know how to resolve it? Any feedback would be greatly appreciated? Thanks,
Pradeep

Hi Pradeep,
You replied that you have "I fixed the date dropdown issue by specifying the theme in iView definition", could you please let us know where to specify the theme because when i ty to create the BSP iView i never get the option for specifying the theme,your assistance would be highly appreciated,do we have any Note on this issue.
Regards,
Rohit Pathak

House Bank number problem with BSP import

Hi,
I have a problem when i import an bank statement that i get an error that the house banknumber is not the same as in de import file. I believe the problem is that in de house bank definition in SAP there are dots (.) between the housebank number like 12.56.58.789 and in the import file on row :25 there are no dots between the number 125658789. Does anybody know how to solve this problem ? i tried something with the add-on format definition and find out that the field "AccountInfo" need some changes.
The expression that is used in the bfp file is (?<=:25:)[^\r\n]*(?=\r\n)
Can somebody help me?
THANKS
Mark

Hi Mark,
The rule for importing data from a bank statement is that house bank account defined in B1 and the data filled into account number field should match bit by bit. So in your case there are two options:
1. change the account number definition in B1 to remove all the dots.
2. if that's impossible, you have to change the BFP file via Format Definition add-on to insert the dots into the pure digit series. that could be done by assigning a mapping method to the account number field.
use concat() function and substring() function together. about the usage of the function ,you can refer to the online help of the tool.
Cheers,
Tedy

Problem with BSP Application

Hi all,
We have three BSP applications running on Production Environment, but after applying Support Patches only two are running , and the third one is not running. But all three applications are running fine in Development, and Consolidation. Here are some inputs which we figure out while trying to fix this problem:
1) When we point the Production Server to Test Server's Web Dispatcher all three applications executed well, and when we point the test server to Production Server's Web Dispatcher, two applications which were running fine executed, but the third one failed. So this excercise gave us a conculsion that problem is with Web Dispatcher of Production . but we couldn't figure what.
2) After debugging both successful applicationa and failed application both are indeed passing some basic URL to HTML Viewer, here are the URL's
Successful Application : https://sun109.pseg.com:443/sap/bc/bsp/sap/zhr_ta
Failed Application :
https://sun109.pseg.com:443/sap/bc/bsp/sap/zhr_poe
(sun109 is host for Production Web Dispatchure)..
and following are the URL's which i have got after i did right click on the HTML viewer when the application is pulled up.(In case of failed application i am getting blank page).
SuccessFul Application:
https://sun109.pseg.com/sap(bD1lbiZjPTEwMCZ0PVpQU0VHJnc9NjE1NzcyMCs=)/bc/bsp/sap/zhr_ta/ta_intro.htm?sap-htmlb-design=
Failed Application:
https://sun109.pseg.com/sap/bc/bsp/sap/zhr_poe
One more point when i took the URL of successful application and changed the application name like this, and pasted it on browser :
https://sun109.pseg.com/sap(bD1lbiZjPTEwMCZ0PVpQU0VHJnc9NjE1NzcyMCs=)/bc/bsp/sap/zhr_poe/default.htm
it worked.
So i think if we compare the URL's ( both input to Web Dispatcher and on properties) of both successful and failed , we notice somepart of URL is missing (some kind of encryption) is missing in failed application.
I want to know why this conversion of URL is happenning , where and how can i fix this problem.
Regards,
Akash
PS: It's very urgent.

Hi,
https://sun109.pseg.com:443/sap/bc/bsp/sap/zhr_poe
is the url of the failed application and under SAPGui we are opening applications in HTML viewer control.This is the url which is passed to the HTML viewer control.
Contrary, this is the URL of successful application
https://sun109.pseg.com:443/sap/bc/bsp/sap/zhr_ta
I have checked this URL while debugging, and this URL is getting passed to HTML Viewer control.
Also, please let me know how to close the thread.
Regards,
Akash Modi

Problem with Bsp URL !!

This is the first time that i create an Bsp and i have some problems.
I created a new Bsp with one Controller , one View and One Page with logic of control.
In these pages I scribed little rows of codice . Then these operations I have created an extern alias and I have associated to it my Bsp (Services).
Now I have some questions:
The First is:
1) How can i associate an URL to BSP and set an First page to Bsp?
Another Questions I'll explicate after to resolve this one.
Sorry for my English and I'll hope that Anyone will answer me.
Thank You BP.

HI BP,
can you please elaborate more on what exactly you need.
here is link for <a href="http://help.sap.com/saphelp_nw70/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm">BSP</a> help.
regards
-Kedar Kulkarni

Session timeout problem with CCA

I have developed a Client applicaiton in ASP.Net 2005 using the SOAP Api provided in Oracle CCA 8.1.3
The System details are as under:
Product – Oracle CCA 8.1.3
Server on Windows 2003 Server – Standard Edition
Web Server – BEA Weblogic 10g3
Database – Oracle 10g
Java Version – 1.5 Update 10
I am facing a problem where the users session changes every 5 Minutes 30 Seconds. I get the "Session Change" message and at this point I cannot see the Agent on the CCA Agent Monitoring screen. What I need to do now is to Reopen the session. Upon Repoening the Session I would get the same SessionId from the WebServer that I had get earlier.
Please help.

Hi All,
could u please help me out how to make the SIP CAlls in the CCA
I am able to chat between supervisor and agent.
when it comes to th eoutbound cal
i am using X-lite software for making the outbound Cal.
when i make a cal the status will be changed to rining mode and comes back to on-hook after few min.
when i see the logs the legs are inviting and getting disconnected
RVSIP_CALL_LEG_STATE_INVITING [44173472]
26/04/2011 15:08:15.931 : 4 : 8028 : 4552 : CallCenter : 27 : # 9: CCallCenter::SendOutMessage() Sending message [##;4;2;99880103;106,9,27,2582,:10.103.91.13,hschbscgn25001,,;] to [type=20, id=0, grp=102]
26/04/2011 15:08:15.931 : 4 : 8028 : 4552 : CallCenter : 27 : ******** : Sent : new message (99880103) to CtiServer Id[0] group[102] version[0]
26/04/2011 15:08:15.931 : 4 : 8028 : 4552 : CallCenter : 27 : # 9: Added Timer[68] for line[9] about[4100] on[1303810945,931]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : CCallCenter::SendOutMessage(CMessage) Sending message [99880100] to [type=20, id=0, grp=0]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : ******** : Sent : new message (99880100) to CtiServer Id[0] group[0] version[1]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : CCallCenter::SendOutMessage(CMessage) Sending message [99880100] to [type=103, id=0, grp=0]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : ******** : Sent : new message (99880100) to RedirectServer Id[0] group[0] version[1]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : Sending GET_CHANNELS_INFO_UPDATE to all NetworkManager
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : CCallCenter::SendOutMessage(CMessage) Sending message [1018] to [type=12, id=0, grp=0]
26/04/2011 15:08:17.009 : 4 : 8028 : 4552 : CallCenter : 27 : ******** : Sent : new message (1018) to NetworkManager Id[0] group[0] version[1]
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : AppCallLegStateChangedEvHandler [[email protected]]
26/04/2011 15:08:19.431 : 0 : 13712 : 4552 : CallCenter : 27 : RVSIP_CALL_LEG_STATE_MSG_SEND_FAILURE [44173472]
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : Adding SDP info to Message
26/04/2011 15:08:19.431 : 0 : 13712 : 4552 : CallCenter : 27 : Failed to DNS continue on a call
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : AppCallLegStateChangedEvHandler [[email protected]]
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : RVSIP_CALL_LEG_STATE_DISCONNECTED [44173472] reason[15]
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : CH[9]: Sending EVENT_DISCONNECT_CALL
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : addAlarm() 44173472
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : AppCallLegStateChangedEvHandler [[email protected]]
26/04/2011 15:08:19.431 : 4 : 13712 : 4552 : CallCenter : 27 : RVSIP_CALL_LEG_STATE_TERMINATED [44173472] reason[19]
26/04/2011 15:08:19.431 : 4 : 8028 : 4552 : CallCenter : 27 : GOT sip_event on channel [9] type [12002]
26/04/2011 15:08:19.431 : 4 : 8028 : 4552 : CallCenter : 27 : # 9: GOT EVENT CALL WAS DISCONNECTED BY REMOTE
26/04/2011 15:08:19.431 : 4 : 8028 : 4552 : CallCenter : 27 : # 9: New event received [0X3 - CALL_MAKECALL_EVENT - 0X4001]
26/04/2011 15:08:19.431 : 4 : 8028 : 4552 : CallCenter : 27 : # 9: CCallCenter::SendOutMessage() Sending message [##;4;2;99880104;106,0,101,;] to [type=20, id=0,

Problem with CIC0 transaction OK codes

Hi Experts,
We are using CIC0 transaction in CRM 3.1 system. As you know there is a button "Reset all fields" ( the one with a crooked arrow sign ) which is used to reset all the fields before entering the next business partner. This button is not working consistently. In my system, I am getting an OK CODE of "%_GC 117 1" when I click this button. But, when the actual user ( who is in a geographically different location ) clicks this button, he gets an OK CODE of "CSEARCH_DELETE". As a reslut I am not able to provide some functionality the user asked for. I checked the SAP GUI version, Patch Level, OS Version, and IE version and settings. There is no difference in these between my PC and user's PC. What could be the problem ? Is it due to some problem with BSP ? Please advise.
Regards,
Sameej T.K.

OK CODE? Hmmmm... are you sure that BSP even in sight of transaction CICO, the one with the crooked behaviour? No ideas. This does not sound like BSP.
But if you feel like experimenting, check whether it is language dependent (EN vs DE). This is just wild shot over my shoulder as I exit stage right.

End Users Problems

Hi Experts:
If any one can answer that after implimentation of SAP, what are the most frequent problems whihc End User suffers from??
Thanks
Rashmi

if it is for time management
mostly u will problem related to Absences and absence quotas updation and some time u may get worng reports when u take reports
End user problems means it depends upon the nature of the functionality which he works
so check Time Related infotypes functionalities and their configuration issues
AS TIME IS UNIVERSAL MODULE

Problem with bank statement processing

Hello,
I have problem with BSP. When I try to add file formats to bank statement I have error - "You are not authorized to change the folder path [message 10003520-34]". I try to add file SAPBPESIB_CSB43.bfp from SAP portal. Path to file is C:\Program Files\SAP\SAP Business One\Attachments\. I have full permissions to group "Everyone" to that folder.
Do you have any idea what can it be?
Regards,
Bartek
Edited by: Darius Heydarian on Mar 28, 2008 11:22 AM.

Hi, I have the same problem when working with local Sap B1 client and DB on the local computer (and connecting as a superuser). Can anyone help?
May be this additional info will help to determine the problem:
when working with SAP-client on the terminal server via remote desktop (and DB is on another server) and when I try to update FormatFilePath (in File Formats Setup window), SAP-clinet hangs on (for approximately 10 minutes ) and then I see that no changes were saved (I see button "Update" again, while expect to see "OK", and no changes were saved to DB). There are no error or warning messages..
When I am updating FileFormat without setting FormatFilePath-column - everything is ok. (info about FileFormat is updated)
Regards,
Katrine

Problem with ending user session in backend with BSP

Similar Messages

Maybe you are looking for