Problem with product registration online

i ahve problem registering my macbook pro online since i bought it up until now which is about 1 month. is there any problem with the system?

Check first if you are already registered:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
registration:
https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa
if the server is down or not responding, try again later.

Similar Messages

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Problems with my Registration Reactivation Required

Mac G5 OS X 10.4.8, Studio 8
With every few launches of Dreamweaver or any of the Studio 8
applications i get a window saying that there's a problem with my
registration and that I need to reactivate my license. I have to
enter my license again (and again) and go through the activation
process and then get taken to the registration page at Adobe only
to discover that I can't register because I am already registered.
That's not the problem. The problem is having to keep re-entering
my license number at, usually, the most inconveniet of times.I have
completely uninstalled Studio 8 per Adobe's instructions, did an
Archive and Install of Mac OS X and reinstalled Studios 8. All is
fine for a few weeks and then this starts all up again. Why is this
happening?
Thanks!

MTSTUNER's advice is right on in this case. I've seen problems with the older versions of Photoshop not being able to write to their installation areas because of UAC.
If Run As Administrator doesn't work, one additional thing you can try is to turn the UAC level down to the lowest setting, run Photoshop once, then return UAC to its default (or leave it off, your choice).
-Noel

Problems with my registration of Photoshop CS2

I have owned different versions of Photoshop over the years, and the latest version I have is CS2.
I have it installed on two computers, one running Windows XP and the other running Windows Vista.
Apparently, Adobe has me under two IDs, both using the same email address, but with different physical addresses, my old one and my new one.   All my registration information is apparently stored under the one with the old address, but I can only get access to the one with the new address when I go to the Adobe website.   That one doesn't see my registrations.
For the past several years I've worked primarily under Linux, using gimp, but I just got a new printer, which is not supported under Linux, so I have to use Windows and Photoshop to print.
Every time I start Photoshop CS2 on the second computer, it tells me I need to register. If I do---needlessly I presume---it accepts the registration, but then the next time I start the program, it does the same thing over again.
I can live with this, but if there is some simple way to fix it, I would like to do so. I've spent a lot of time talking to Adobe on the phone or using chat online, but haven't got any help on this matter.
Also, I hope to make some changes to my system in the near future.    First, I will probably upgrade both computers to Windows 7. Second, I may replace one of the computers with a new computer. Finally I may upgrade to Photoshop CS5.
Can anyone give me any advice about how to go about these things so as to end up with two legitamate versions of Photoshop on two computers, and so as to avoid problems..    I am worried that I may have to spend hours on the phone trying to get it done.

MTSTUNER's advice is right on in this case. I've seen problems with the older versions of Photoshop not being able to write to their installation areas because of UAC.
If Run As Administrator doesn't work, one additional thing you can try is to turn the UAC level down to the lowest setting, run Photoshop once, then return UAC to its default (or leave it off, your choice).
-Noel

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Problem with Adobe Help Online

Dear sir,
Hi, My name is Palm.
I have a problem with Adobe Help. Every time I use the function "Leyer Style" >> "Gradient Overlay".
Adobe Help Online is often displayed without my pressing or click anything.
It was a problem with my work.
I have to restart the program. To work again.
Thanks for the help.

Thank you.
It's excellent for this solution.
I have solved the problem as suggested.
Now the problem is still not found but I will monitor this issue further.

Migration to CS4 has caused problems with production

Hi guys
We have been developing a production in Flash CS3 for the
past month. We were experiencing problems with memory leaks in
Flash Player 9 and it was recommended that we upgrade to Flash CS4
and Flash Player 10 so we could use the new unloadAndStop() method
to unload assets from the production.
On upgrading to FP10 we were able to solve our memory leak
issue. But on doing so, the upgrade introduced a new problem into
our production. Some of the methods that worked in FP9, now do not
work in FP10. Nothing in the code of the methods has changed.
Is anyone aware of any bugs in FP10 or any differences in the
coding that is needed to do tasks like reference the stage, create
event listeners, etc?
Cheers
Jay

matti3 wrote:
Hi, i have tried that and whilst it works for some folders it doesnt work for all, but more frustratingly than that, it has stopped reading quickly, it now takes anywhere up to 5 minutes to scan the dri've whereas before it was taking 5-0 seconds. Also everytime i exit out of one folder and then want to go back into it it again takes ages to search.. almost like it isnt storing info from the previous search anywhere... any ideas why this change will have come baout.. it cant be a coincidence.. it just never is.
thanks for replyin so quickly btw
Message Edited by matti3 on <SPAN class=date_text>02-0-2006 <SPAN class=time_text>09:25 AM
No probs. Have you tried it on other computers? If other computers work fine, then it probably spells that the player is fine, but possibly the computer is lagging due to the running of too many applications or there are viruses, adware or spyware in your computer that is slowing it down.

Problem with Individual Registration of HTMLDB app schema with SSO

I have successfully registered HTML DB instance as partner application to SSO and it works well.
Then, I also want to try with Individual registration of partner application schemas on the same HTML DB instance.
I have followed every steps in 'How-To' but keep getting this following error message:
Error Unable to run parse_url_cookie procedure as schema ICONNFNB with partner app name ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PARSE_URL_COOKIE' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

To add more info to my previous question, my HTML DB version is 1.6.0.00.87
I have successfully registered HTML DB instance as
partner application to SSO and it works well.
Then, I also want to try with Individual registration
of partner application schemas on the same HTML DB
instance.
I have followed every steps in 'How-To' but keep
getting this following error message:
Error Unable to run parse_url_cookie procedure as
schema ICONNFNB with partner app name
ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number
or types of arguments in call to 'PARSE_URL_COOKIE'
ORA-06550: line 1, column 7: PL/SQL: Statement
ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

Problem with AppleCare Registration

Hi,
I've purchased an AppleCare Plan for my Unibody MBP, but I have some problems during registration. It says my serial number is not valid, and when I try to see the warranty status, it says that my product serial number is not valid.
Can anyone tell me what I have to do in order to solve this problem?
Thanks in advance

that happened to me with my brand new MBP. Went to register it and it didn't like my serial #. I just called in and spoke to apple. They did it on their end and all was well after that.

Problem with Whole Database Online+Redo log Backup

Dear Marcus Sir,
I am facing while taking "Whole Database Online+Redo log Backup" through DB13 T-Code.
Below is the "Problem part of the Backup log", however if you need I will send you full log.
Hope you will find out problem soon
#FILE..... /oracle/ANP/sapdata2/sr3_8/sr3.data8
#SAVED.... sr3.data8 ANPB260810/12
BR0280I BRBACKUP time stamp: 2010-08-27 11.03.22
BR0063I 9 of 51 files processed - 19400.070 MB of 135986.469 MB done
BR0204I Percentage done: 14.27%, estimated end time: 11:47
BR0001I *******___________________________________________
BR0202I Saving /oracle/ANP/sapdata2/sr3_9/sr3.data9
BR0203I to /dev/rmt0.1 ...
BR0278E Command output of 'LANG=C dd obs=1024K bs=1024K if=/oracle/ANP/sapdata2/sr3_9/sr3.data9 of=/dev/rmt0.1':
dd read error: I/O error
462+0 records in
462+0 records out
BR0280I BRBACKUP time stamp: 2010-08-27 11.03.36
BR0279E Return code from 'LANG=C dd obs=1024K bs=1024K if=/oracle/ANP/sapdata2/sr3_9/sr3.data9 of=/dev/rmt0.1': 2
BR0222E Copying /oracle/ANP/sapdata2/sr3_9/sr3.data9 to/from /dev/rmt0.1 failed due to previous errors
BR0280I BRBACKUP time stamp: 2010-08-27 11.03.41
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bedziydp.ant 2010-08-27 11.03.36
BR0280I BRBACKUP time stamp: 2010-08-27 11.03.41
BR0054I BRBACKUP terminated with errors
Warm Regards
Ahsan

Hi,
since you are getting a read error, it might as well be, that your datafile is defective.
Try the same dd-command to /dev/null, to see if it is possible to read the entire file.
First make sure that your null-device is existing, otherwise you might face a root-fs full problem.
dd obs=1024K bs=1024K if=/oracle/ANP/sapdata2/sr3_9/sr3.data9 of=/dev/null
or try a dbverify on it, which would also read the entire file and do a checksum test.
brbackup -c -u / -m /oracle/ANP/sapdata2/sr3_9/sr3.data9 -t online -w only_dbv
Good luck
Volker

DEFAULT_WS_DEST web service destination - problem with production server

Hi All,
I'm getting close to go live for a project which uses a vast number of custom web services to access an Oracle DB backend to supply data to a Portal front end. Many of the applications we have developed are based on Web Dynpro and so we have used adaptive web service models to call the web services. My basis guy and I sat down and configured the DEFAULT_WS_DEST logical web service destination to work correctly in both our DEV and QA systems.
We completed the production build but when testing the Web Dynpro applications I get a dump saying '"DEFAULT_WS_DEST/default" cannot be found'.
Does anyone know why our production system is looking for a connection called "DEFAULT_WS_DEST/default" instead of just "DEFAULT_WS_DEST" as per our DEV and QA system?
Thanks in advance.

Ok, I was really hoping for some response at least! Guess no-one has had this problem before?
Here's the exception message:-
Caused by: java.rmi.RemoteException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.NameNotFoundException A configuration with the path
"webservices/proxies/sap.com/DynamicWSProxies/DEFAULT_WS_DEST/default" does not exist.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].;
nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class
com.sap.engine.frame.core.configuration.NameNotFoundException A configuration with the path "webservices/proxies/sap.com/DynamicWSProxies/DEFAULT_WS_DEST/default" does not exist.
If anyone has any suggestions at all I'd be very grateful. As mentioned, the DEFAULT_WS_DEST configuration does exist and it works perfectly in both DEV and QA but not PROD.
Thanks,
Gareth.

Problems with ratio when onlining

Having cut my project at photo-JPEG quality offline, I've onlined the sequence using media manager at DV quality. My sequence settings are fine, however my clips are being cropped in the timeline - rather then being 16:9 the side edges are cropped slightly. The problem is neither with the clips nor the sequence settings, as when I drag a clip onto the sequence the problem does not occur. Is there any reason that the clips already edited within the sequence would only playback cropped?
G4 Powerbook Mac OS X (10.4.3)

Check in the browser for the column pixel aspect (or something alike).
For Photo-JPEG it was Square, but for PAL (Liverpool UK, it was) it should say PAL CCIR 601. Select ALL in the browser. Control click within the column and select PAL CCIR 601.
Also make sure that Field Dominance is 'Lower' (probably now on 'none') and that Anamorphic flag is on.
It;s possible that you have to remove aspect changes that FCP made when you dropped the clips in the timeline:
In the timeline select all. Command-Option-V (remove attributes) and select DISTORT.
If that choice is not available: GOOD
Be aware that this will also take changes you made manually in the motion Tab > Distort.

Publishing Folio as PUBLIC - Problem with Product ID

How do we get a Product ID for folio publishing?
I had a lot of trouble learning this DPS and I am stuck over here.
Also.... I exported the .folio file for viewing it on the desktop using Adobe Content Viewer.... It produced a zip file. When the zip file was opened there was a .folio file. I opened that file in Adobe Content Viewer. This shows me only horizontal layout and not vertical. Please provide a solution for this problem too....
Thank You,
Ankit Tanna

Hi Ankit,
Can you explain what you are trying to build? Will you be using DPS Single Edition or a DPS Pro/ Enterprise? Will you be building a Single Edition app or a multi-folio app?
For Single Edition, you can just 'make up' any productId, for example "tanna1"
For previewing your folio on the desktop, you can just hit 'preview' in the Overlay Creator in Indesign ; no need to export and download a ZIP file. This is only needed if you will build your own Single Edition app with Viewer Builder.
With kind regards,
Klaasjan Tukker
Adobe Systems

Please help! problem with my registration form

Hi all im hoping someone can point out a problem in the code
to me cuz i have searched and searched the form and all seems
completely fine. I am trying to have a message to popup in the
header if someone tries to register with an already registered
email address? i am using mysql 5.0 connected datasource with the
mysql 3.x driver, using cf MX7. oh and im connected via the RDS and
the localhost.

Hi yeah there is no errors coming up.. if i was to insert a
user with an email address not already registered then it will go
to the registration success page howerer if i tried registering an
already registered email address the registration is not successful
but it just resets itself without any messages?

Problem with product category

Hello,
I have replicated my product category for my new backend but i have a problem.
When i'm logged on germand it is OK but in english I have none and in french juste a few.
I saw that I have the translation but I don't understand why they don't appear when i create my schopping cart.
can you help me?
thanks

Hi Eileen,
You don't have filled description for English and French language.
Please go to transaction COMM_HIERARCHY and double click in product categories -
(R3MATCLASS). Then go to backend R3MATCLASS node and click on category.
On bottom in table You will see language. Add proper description for proper language code.
Regards,
Marcin Gajewski

Problem with product registration online

Similar Messages

Maybe you are looking for