Problems with my Registration Reactivation Required

Mac G5 OS X 10.4.8, Studio 8
With every few launches of Dreamweaver or any of the Studio 8
applications i get a window saying that there's a problem with my
registration and that I need to reactivate my license. I have to
enter my license again (and again) and go through the activation
process and then get taken to the registration page at Adobe only
to discover that I can't register because I am already registered.
That's not the problem. The problem is having to keep re-entering
my license number at, usually, the most inconveniet of times.I have
completely uninstalled Studio 8 per Adobe's instructions, did an
Archive and Install of Mac OS X and reinstalled Studios 8. All is
fine for a few weeks and then this starts all up again. Why is this
happening?
Thanks!

MTSTUNER's advice is right on in this case. I've seen problems with the older versions of Photoshop not being able to write to their installation areas because of UAC.
If Run As Administrator doesn't work, one additional thing you can try is to turn the UAC level down to the lowest setting, run Photoshop once, then return UAC to its default (or leave it off, your choice).
-Noel

Similar Messages

I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

I am having problems with certain websits that require adobe flash player

Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

Problem with sound in games requiring quicktime

I recently purchased CSI 1. I installed the game and the latest version of quicktime player. As soon as the game starts and the first character starts talking the game pauses as if loading and then plays for a second and pauses again for a few seconds. This intermittent sound problem makes it impossible to play the game as the freezing stops everything from functioning. I tried another game that requires quicktime to be installed and that game is pausing the same. Has anyone else had this problem? I have all the latest drivers installed for Vista. Any help would be much appreciated.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

Problems with my registration of Photoshop CS2

I have owned different versions of Photoshop over the years, and the latest version I have is CS2.
I have it installed on two computers, one running Windows XP and the other running Windows Vista.
Apparently, Adobe has me under two IDs, both using the same email address, but with different physical addresses, my old one and my new one.   All my registration information is apparently stored under the one with the old address, but I can only get access to the one with the new address when I go to the Adobe website.   That one doesn't see my registrations.
For the past several years I've worked primarily under Linux, using gimp, but I just got a new printer, which is not supported under Linux, so I have to use Windows and Photoshop to print.
Every time I start Photoshop CS2 on the second computer, it tells me I need to register. If I do---needlessly I presume---it accepts the registration, but then the next time I start the program, it does the same thing over again.
I can live with this, but if there is some simple way to fix it, I would like to do so. I've spent a lot of time talking to Adobe on the phone or using chat online, but haven't got any help on this matter.
Also, I hope to make some changes to my system in the near future.    First, I will probably upgrade both computers to Windows 7. Second, I may replace one of the computers with a new computer. Finally I may upgrade to Photoshop CS5.
Can anyone give me any advice about how to go about these things so as to end up with two legitamate versions of Photoshop on two computers, and so as to avoid problems..    I am worried that I may have to spend hours on the phone trying to get it done.

MTSTUNER's advice is right on in this case. I've seen problems with the older versions of Photoshop not being able to write to their installation areas because of UAC.
If Run As Administrator doesn't work, one additional thing you can try is to turn the UAC level down to the lowest setting, run Photoshop once, then return UAC to its default (or leave it off, your choice).
-Noel

Problem with product registration online

i ahve problem registering my macbook pro online since i bought it up until now which is about 1 month. is there any problem with the system?

Check first if you are already registered:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
registration:
https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa
if the server is down or not responding, try again later.

Problem with Individual Registration of HTMLDB app schema with SSO

I have successfully registered HTML DB instance as partner application to SSO and it works well.
Then, I also want to try with Individual registration of partner application schemas on the same HTML DB instance.
I have followed every steps in 'How-To' but keep getting this following error message:
Error Unable to run parse_url_cookie procedure as schema ICONNFNB with partner app name ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PARSE_URL_COOKIE' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

To add more info to my previous question, my HTML DB version is 1.6.0.00.87
I have successfully registered HTML DB instance as
partner application to SSO and it works well.
Then, I also want to try with Individual registration
of partner application schemas on the same HTML DB
instance.
I have followed every steps in 'How-To' but keep
getting this following error message:
Error Unable to run parse_url_cookie procedure as
schema ICONNFNB with partner app name
ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number
or types of arguments in call to 'PARSE_URL_COOKIE'
ORA-06550: line 1, column 7: PL/SQL: Statement
ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

Problem with AppleCare Registration

Hi,
I've purchased an AppleCare Plan for my Unibody MBP, but I have some problems during registration. It says my serial number is not valid, and when I try to see the warranty status, it says that my product serial number is not valid.
Can anyone tell me what I have to do in order to solve this problem?
Thanks in advance

that happened to me with my brand new MBP. Went to register it and it didn't like my serial #. I just called in and spoke to apple. They did it on their end and all was well after that.

Problems with CVS and improvements required

Developing with JDeveloper 9.0.3 preview we have found some bugs and some improvements that would be very useful.
Problems
1)     Overlay icons on versioned files dont show the real state of the file as described in the Using Concurrent Versions System (CVS) With JDeveloper section of the Using Support for Team Based Development help manual (this issue was solved with a patch for the 9.0.2 release but it cant be applied for the 9.0.3 preview).
2)     When CVS finds revision conflicts on the project file (.jpr) or on the descriptors of BC4J objects and packages, it overwrites (properly) the source file with the <<<<<< and >>>>>> comments to denote the conflict, and the warning for the conflict is signaled in the CVS log; but it would be nice (because it is annoying to check everytime the CVS log especially for a critical message like a conflict) having a message box reporting these critical messages.
3)     During the import module function to import the project files into the CVS server, the image files (such as .GIF and .JPG) ought to be automatically added as binary files, or better still, it would be useful a configuration fuction to enumerate the extensions to be added as binary files.
4)     After some types of CVS commands the CVS editors and CVS watchers windows becomes suddenly closed.
Required Improvements
1)     It would be useful a function showing all the files to be added to source control in a list and in a more general case, the versioning status of all the project files, without having to expand all the nodes of the project tree.
2)     Its uncomfortable the current behaviour for the check out/edit on the project file (jpr) that automatically selects all files included within it. It would be useful to explicitly select to operate only on the project file or to include also the files within it; or at least to place the project file at the top of the list.
3)     The Edit Files command for the CVS source control ought to support the cvs edit option -c (to check that working files are unedited) and an option to execute an update command before the edit one, to have the most recent revision of that file.
4)     The opportunity to treat every type of BC4J object as a single CVS entity, taking all the files required by the single BC4J object grouped together and then checked-in, checked-out, etc. in a simple one-click operation.

1) Overlay icons [cut] Has the problem returned in 9.0.3 and if so can you give me details of your cvs client version i.e CVSNT 1.0.11.1.3 etc.. It would be really helpful in tracking this down. The CVS version in use is (from the cvs --version command output): Concurrent Versions System (CVSNT) 1.11.1.3 (Build 57a) (client/server). The JDeveloper version is 9.0.3.988 preview.This is the client version we test against and recommend. We have seen no problems here and can't reproduce this. Could you help us track this down by supplying the answers to the following questions?
1, What OS and CVS version is the server using?
2, For a file that is showing the incorrect overlay could you check the timestamp in the CVS\entries file and post that and the timestamp on the actual file system file?
3, What timezone are you currently working in and is daylight savings time in operation?
and finally
4, Is the CVS server in the same timezone?
Hopefully this will give us a good start on where the problem is.
[cut]
We have already configured cvswrappers to properly handle binary files, but the cvs import function seems to ignore these settings, while cvs add uses it. If you try to import a project with some gif files using jdev, having configured cvs as described, these files will be corrupted. After this, if you add another gif file using cvs add function (not add binary) the settings will be used and the file are correctly stored.
It seems that to make the import command work properly, file types have to be explicitly specified for each binary file (-kb option) on the cvs command line. To verify this we have tried the same operations using wincvs client. Inspecting the log window, we see that the client explicitly force the file types (they use an internal filtering to recognize binary files instead of file extension):
cvs import -I ! -I CVS -W "*.gif -k 'b'" -m "no message" testmodule avendor areleaseRight, I'll add this information to the bug and make sure it gets evaluated.
4) After some types of CVS commands the CVS editors and CVS watchers windows becomes suddenly closed. Could yet tell me what these operations are so I can log a bug? We dont know if its effectively a bug, but the window becomes closed when automating layout switching occurs (if its enabled in preferences), for example: Im in the ide without any open editors (current layout Editing), I get the editors list, then I open an uiXML file (the layout switch to Web Editing) and the list disappears. Even if the layout switch back to Editing (automatically or manually) the list is not re-shown (its not saved in the layout).This is an issue with JDevs layout in that the SCM windows are not default in any layout and so they are closed when the switch occurs. This is being looked at for a future release.
3) The Edit Files command for the CVS source control ought to support the cvs edit option -c (to check that working files are unedited) and an option to execute an update command before the edit one, to have the most recent revision of that file. I'll add enhancement requests for these I especially like the update before edit suggestion. For team based development the reserved edit functionality (the -c option) would be very useful, especially for working with business components.I'll add your use case to the enhancement, as this is a very good reason to have "-c". Hopefully if we can implement 4) and integrate source control and BC4J better in a future release.
4) The opportunity to treat every type of BC4J object as a single CVS entity, taking all the files required by the single BC4J object grouped together and then checked-in, checked-out, etc. in a simple one-click operation. We would also like to have support for this in source control and it is a feature that is currently under investigation.It would be -very- useful if, while trying to edit a generic component under source control, jdev suggested (in the edit dialog window, for example) which other files are likely to be modified, giving the chance to edit them also (if not already). For example, trying to edit a ViewObject component, it will be probably needed also to edit the .jpx, the project, the business package descriptor, in addition to the component implementation and descriptor.Agreed.
We also have some doubts on the meaning of the dialog that often appears after a checkout or a folder update, asking New checked out files were detected; how would you like them to be dealt with?. Can you explain whats the behavior of each choice?The three choices breakdown as follows
1. Open checked out files in the active project
This adds all files to the project that is active in the IDE, if all files were already in the project no change will appear to occur. If new files have been downloaded they will now appear in the project
2. Create a New project for the checked out files
Generate a completely new fresh project from the checked out files, similar to the default behaviour of checkout module in JDev
3. Do not open a new checked out files.
Perform no action with the files, lets the user add them if they so wish.
Thanks for the replies,
Geoff Waymark
JDev SCM Team

Please help! problem with my registration form

Hi all im hoping someone can point out a problem in the code
to me cuz i have searched and searched the form and all seems
completely fine. I am trying to have a message to popup in the
header if someone tries to register with an already registered
email address? i am using mysql 5.0 connected datasource with the
mysql 3.x driver, using cf MX7. oh and im connected via the RDS and
the localhost.

Hi yeah there is no errors coming up.. if i was to insert a
user with an email address not already registered then it will go
to the registration success page howerer if i tried registering an
already registered email address the registration is not successful
but it just resets itself without any messages?

Problem with BIS registration at mobile provider

Hello, I just bought an unlocked BB 9720, as a provider I choosed Vodafone (I live in Spain). Can I register for BIS online? I contacted vodafone, but they dont even know what it is.

Hi and Welcome to the Community!
You need to ring them back up...they certainly do know what BIS is, or at least what the specific plan they sell is required for BB devices. The person you spoke to might not be properly trained...so try someone else.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unique problem with validation/ making field required

I have searched the forums trying to find a way to make a field required based on the users selection of a check box, or something else. So far, everything says use nullTest = "error".
I have tried to do this and get the following results: The red highlighting, which shows up around my other required fields, will not show up unless you click in the text box and then out of it. Weird! Then, when pressing the submit button, it will not actually give you an error message if there is nothing in that text box, as it will if there is nothing in the fields that I originally make required.
Any thoughts, or fixes would be greatly appreciated.
Thanks in advance for any help.

We do the same thing here. We haven't had any issues with the submit not validating the field correctly though. Our only issue was the red highlighting. To get around this, we would call resetdata on the field. resetData clears out the value of the field so you need to store it off and then reset it.
if (form1.BP1.ChangeActivities.Pos1.Department==1) then $.validate.nullTest = "error" else $.validate.nullTest = "disabled"
endif
$=$
var x = $
xfa.host.resetData("form1.BP1.ChangeParticulars.Pos1To.DeptNo")
$ = x

Problems with iBook, urgent help required...

Hi, a few months ago, i went to the power settings and checked the option for shut-down at midnight and power on at 6am... Then just last week, i unchecked the option for the automatic on/off... But since then, my iBook still does its' routine... BTW, i made sure that the option is unchecked every night as i leave my com on throughout the night ti download stuff, but it still does what i programmed it to do months ago, even after i readjusted the settings...
I have tried resetting the PMU, but to no avail...
AND...
Whenever i log in to MSN, the display picture will be the picture from my User Account on my iBook... I have changed it serveral times to my desired picture but when i log in again the next day, the picture is still the one from my administrator account... And also, every time i close my conversation windows, the application will ask me whether to save my conversations even though i have alsready selected automatically save all conversation... The last problem is very often with no apparent reason, the application logs out on it's own, sometimes in the middle of a conversation...So what is wrong with my MSN and what should i do about it...?
Ian

Hi Linuxuser,
I also would suggest not using MSN. I find it to be a pain, and you have more capabilities with other programs. I really like using iChat. I love the Mac feel of iChat so I configured iChat to work with MSN through Jabber. The link below might help if you are interested:
Using iChat/Jabber to work with MSN
To have iChat work with other programs like Jabber, ICQ, MSN and Yahoo, you can use a similar technique. Here is one way of doing it:
iChat Jabber Tutorial
There also is a link to the thread Does iChat work with Jabber, ICQ, MSN, and Yahoo?
I hope that helps,
Jon 

Problems with videos and music requires restore

I have a 30GB Video and in general everything works fine. However, I have had to restore the device 4x since Christmas due to the following;
When I select a video, the display shows the play icon and battery icon then goes blank and returns to the list of videos and/or when selecting a song, it displays the song I selected (with artwork) and then scrolls through the list of songs in that play list and does nothing.
I can resolve the issue by restoring and syncing, but the problem eventually returns.
5th Generation 30GB Video Windows XP USB connection

In case anyone else has this issue, I found the solution. The problem was caused by my earbuds. I bought a new pair and that fixed the problem.

Problems with the registration pop up menu

is there a reason why that when i go to open a document in either photoshop or indesign, the registration pop-up window comes up completely blank, won't go away and i can't go on to type or edit the document at all? i've just tried illustrator now and that is the same.

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Problems with User Privileges - Help required Novice Server Experience

Hi, We have an old Xserve runing Mac OS X 10.2.8.
I have shared the 3 drives out no problem. The problem I have is with Workgroup Manager 1.2.2. I have set 4 User accounts with their own username and password to access the drives which works fine, but if one User modifies a file or puts a new file on to the Server another user has only read access to that file from the server, and if they try to copy the file/folder to their local machine a warning box comes up saying that they have Insufficent Privileges.
It seems each User can only work on their individual files which is problem when we all need access to the same files/folders.
What do I need to do?
Many Thanks
Richard

Hi Richard.
You need to create a Group, and add all of your Users to that Group.
Make the owner of the sharepoint your admin account (who can be added to the Group, or not), and make the Group , well, the new Group you've created.
Set permissions for the Group to Read & Write.
In Workgroup Manager, Sharing, Share Points
select AFP and then choose “Inherit permissions from parent"
This is all in the 10.2 Server Admin, worth reading. The 10.4 docs are far better and it's a worthwhile upgrade if that's in the cards at all.

Problems with my Registration Reactivation Required

Similar Messages

Maybe you are looking for