Problem with saving record - second post.
Hi I have another post in this forum for the same problem.
I have form with over 100 items which works fine but while I was testing some new features I got an error (I have tried to execute PLSQL with error) I got an error
wwv_flow.accept: SIGNATURE (parameter names) MISMATCH
VARIABLES IN FORM NOT IN PROCEDURE: P_T101
NON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM:
DAD name: apex
PROCEDURE : wwv_flow.accept
URL : http://XDB HTTP Server:8081/apex/wwv_flow.accept
PARAMETERS :
===========
P_FLOW_ID:
101
P_FLOW_STEP_ID:
9
P_INSTANCE:
4797160937577913
P_PAGE_SUBMISSION_ID:
3712119240091649
P_REQUEST:
SAVE
P_ARG_NAMES:
6894643590876812
6894450662876812
6913761084643064
2346719179217056
6895051399876812
6894054107876811
1095816090216725
2378326059004269
2378513031010052
and more...
Now when I try to save or submit this record I always get the same error, the rest of the application works fine.
Is there any way so I can re-save this record and continue process it?
Thanks in advance.
Robert
Here is what could be happening. If some of the page items are conditional or conditionally display do not save state then they do not get counted in the 100 limit. As and when the conditions allow more than 100 items to be enterable or save state it might be causing these errors.
I did not understand the "resave these records" bit.
Regards,
Similar Messages
-
Problems with ECATT recording using SAPGUI Record
Hello,
I got a problem with my recording. All the prerequisites are done. The problem is, that when the recording is done i don't see the recording in SECATT testcase. Normally when you do a recording you see at the bottom right of the gui a red/white icon active. When i do a recording now, this red/white icon isn't active.
For my it's a very strange error. I hope somebody can give me a hint where i can look,
Thanks in advance.
Kind regards,
Maarten.Maarten,
First when you start the recording using SAPGUI, you will get the pop-up whether to record this new session. You need to select Yes before continuing your recording.
Secondly check the scripting values in the target system whether it is enabled or disabled using the RZ11 transaction. Mostly SAP Basis team have authorization to change these values for us.
Here is the parameter we need to check in RZ11 - sapgui/user_scripting. It should be TRUE.
Let me know if this helps. -
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.
Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?
W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago. -
Problem with "Saved with Id" in Reports
Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur BhandariAnkur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas -
Hello,
Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
Have i accidentally locked something up?
Regards,
NiclasRun disk utility on your hard drive to repair your permissions. http://support.apple.com/kb/HT1452
-
Problems with Saved Watermarks - Wrong Font Size
Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes -
Error, problem with saving documents, Illustrator
I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?<moved from Downloading, Installing, Setting Up to Illustrator>
-
Looks like there is a problem with your recording ...
When I turned on my laptop today, I noticed that I was unable to use the webcam in skype. When looking within the video settings, there is a message that states "Skype could not find a webcam...". When trying to use Skype Metro App, it detects the webcam, however when trying to do a video call, the webcam does not turn on, and when trying to send a video message, there is the message "Looks like there is a probelm with your recording".
This problem impacts all applications except for the Camera Metro App (Which works without problem).
I've confirmed that the webcam is in the device manager under imaging devices and I've tried to use both the default microsoft drivers, as well as the manufaturers drivers with no avail. There is no error under device manger for the webcam. I also tried a system restore to a date before the issue took place which also did not work.
Any help would be greatly appreciatedruwim wrote:
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
How do you attach a file on these forums? I've tried looking for an option to attach a file however I could not find one. -
Problem with saving data in text file in Application server
Hello Experts,
I am trying to save a text file in application server.When I text file have less that 60000 (i.e 59999) records, it saves the file successfully, but if records in text file (saved in application server) is more than 60000 (i.e 60002), it creates a new file at the 60000th record with the continued records.
Can anyone please advise, why it is creating a new file if records are more that 60000. I tested it with 59000 records in my internal table and it is working fine. I have not given any restriction in my program to create a new file if records are more than 60000.
The logic I implemented is the following:
*Open file
open dataset g_accnt_file for output in text mode encoding utf-8.
if sy-subrc = 0.
clear g_header_record.
*Building header record for Accounting Validation file
concatenate gc_hdr_desc
gc_filetype
gc_sequence
gc_idntf_refresh
gc_cmpny_idntf
gc_accnt_id
sy-datum
sy-uzeit
gc_linde_group
sy-sysid
gc_not_used into g_header_record separated by
gc_deliminator.
transfer g_header_record to g_accnt_file.
*Move Cost center data to file to create a detail record for Accounting
*Validation file
loop at gt_csks into gs_csks.
*Remove leading Zeros
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = gs_csks-kostl
importing
output = gs_csks-kostl.
* Overlay gs_csks-kostl with space.
* SHIFT gs_csks-kostl RIGHT DELETING TRAILING gc_space.
*Prepare Cost Centre String
perform prepare_costcentre_string.
*Prepare detail record with Company Code & Cost Centre
perform prepare_detail_record.
clear:g_detail_record,gs_csks,g_coa.
endloop.
*Move Order data to file to create a detail record for Accounting
*Validation file
loop at gt_aufk into gs_aufk.
*Remove leading Zeros
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = gs_aufk-aufnr
importing
output = gs_aufk-aufnr.
* SHIFT gs_aufk-aufnr RIGHT DELETING TRAILING gc_space.
*Prepare Order String
perform prepare_order_string.
*Prepare detail record with Company Code & Order
perform prepare_detail_record.
clear:g_detail_record,gs_aufk,g_coa.
endloop.
*Move WBS data to file to create a detail record for Accounting
*Validation file
loop at gt_prps into gs_prps.
call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
exporting
input = gs_prps-pspnr
importing
output = g_wbs_element.
* SHIFT g_wbs_element RIGHT DELETING TRAILING gc_space.
*Prepare WBS Element String
perform prepare_wbs_string.
*Prepare detail record with Company Code & WBS Element
perform prepare_detail_record.
clear:g_detail_record,gs_prps,g_coa.
endloop.
*Building trailer record for Accounting Validation file which will
*contain the total number of detail records in file
concatenate gc_trail_desc
g_total_count
into g_trailer_record
separated by gc_deliminator.
transfer g_trailer_record to g_accnt_file.
*Close file
close dataset g_accnt_file.
if sy-subrc = 0.
message s036(/lig/fi).
endif.
endif.
endform. " SELECT_DATA
Edited by: Matt on Sep 30, 2010 11:02 AM - added tagsHi Pankaj,
Can u check the concatenate statement with one more data. Check the no of lines for a single file.
concatenate gc_hdr_desc
gc_filetype
gc_sequence
gc_idntf_refresh
gc_cmpny_idntf
gc_accnt_id
sy-datum
sy-uzeit
gc_linde_group
sy-sysid
sy-subrc
gc_not_used into g_header_record separated by
gc_deliminator.
Regards,
Amitava -
Performance problem with selecting records from BSEG and KONV
Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
PrashantHi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient. -
I specifically purchased the Soundblaster x-fi HD for vinyl recording to my computer. The problem is as the signal runs through the unit into my computer, i am unable to designate the different special effects available with this unit. I can record the record just fine but I was counting on being able to record vinyl and adding in the effects into the actual recorded file, but no matter what I do, i cannot get this to happen. Is it possible to do this with this particular unit, or if not, can you direct me to something that will? My email address is [email protected] Any info anybody can give me on this is deeply appreciated.
Jord, when I called it a "phenomenon" I did not mean to describe it as a bug or fault - you're right, it is a desireable feature of cycle recording.
As far as your question goes: Suppose you are recording track-by-track a song with two parts, an acoustic guitar and vocals, and the acoustic guitar part has an intricate eight-bar solo that needs to be redone. The advantage of using cycle recording and autodrop here is that you could define a cycle region giving you a two-bar intro (say) to the part you need to rerecord and a couple of bars of outro, making it easier to accomplish a musical phrasing. For example, say you're a vocalist trying to record a one-octave scale, and your pitch is off on the "fa-so." With cycle recording and autodrop, you could sing along with the "do-re-mi" and settle your pitch before rerecording the notes you flubbed, whereas (as I understand it) if you're just rerecording the "fa-so" in cycle mode, you won't get the "do-re-mi" as an intro after the first pass and would then just hope that you're nailing the notes you need to rerecord cold.
You can combine cycle recording with autodrop in Midi - why not in audio? It's a desireable feature in both. -
Problem with User Defined Second Selection Screen
Hi Gurus,
I have a problem with the selection screen selections. My requirement is that , User when he selects a check box on the main selection screen ( which is 1000) then at the at-selection event, another screen (whose number is 2000) will be called and it has some parameters to enter values. My problem is that how to get the values from this second screen and use them in the in my program. There is an execute button on the second selection screen and when i click that, nothing is happening.
Can anybody suggest me how to get the values from this screen which we called, and entered values in that screen. How to use these values and is there any way that we can do this.
Thanks in advance for helping me out.
Regards,
Srinivas.Use <b>DYNP_VALUES_READ</b> FM to read the values from your dynpro screen...
Like this...
DATA: ls_dyname TYPE d020s-prog,
ls_dynumb TYPE d020s-dnum.
gt_dynpfields TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
ls_dynumb = '0112'.
gt_dynpfields-fieldname = 'RF05A-NEWKO'.
APPEND gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = ls_dyname
dynumb = ls_dynumb
TABLES
dynpfields = gt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
Greetings,
Blag. -
Problem with P45 Platinum during POST
Good day!
I have MSI P45 Platinum mainboard and from to time to time it freezes during POST with AMI bios POST code - 423C. This happens right after the message that "4096MB OK" and before the detection of SATA/IDE drives. When this happens, the only way to make the system run is to turn off the power (pressing Ctrl-Alt-Del of Reset would result in the same error) - after that the POST procedure finishes correctly and I don't experience any problems afterwards (system is rock-solid after POST completion).
So my question is - can anyone explain me what does this post code mean (D-Leds are not much of a help)? Is this a mobo problem or may be there is some kind of incompatibility with my hardware. I should mention also that I've tried all versions of Bios both official and beta without any success.
This problem does not trouble me that much (doesn't happen often), but still I would like to understand what may cause it.
P.S. My system config - iC2D E8300/MSI P45 Platinum/4x1Gb DDR2-800 Geil Black Dragon (5-5-5-15)/MSI Radeon 4870 1Gb OC edition/HDD 250 Gb WD + 120Gb Seagate/SB Audigy 4/DVD-RW Asus 1814/PSU TT Toughpower 700w (w0105)
Thanx in advance and please excuse my poor EnglishThank you for the reply!
Quote from: Jack the Newbie on 16-December-08, 06:39:42
What is your current BIOS Version?
I've recently flashed the latest beta bios version - 1,5 beta 6... but it produces the same error as did the latest official bios v1.4
Quote from: Jack the Newbie
Does the same problem occur with only one memory module installed?
I don't know actually. But thanks for pointing this out - I will test the system with one (and then with two) module(s). I've tested the modules with the memtest86+ software (the latest version, which supports P45 chipset) several times and it showed no errors. So the modules are OK and they worked without any problems with my previous mb (Gigabyte P35-DS3).
Quote from: Jack the Newbie
What do the POST-Status LEDs of the board tell you, when the system freezes at the described stage?
Well, I guess I don't fully understand what does the combination of LEDs tell during the freeze. I'll try to describe the combination -
LED12 - OFF LED13 - GREEN
LED8 - RED LED7 - OFF
LED14 - OFF LED10 - GREEN
LED15 - RED LED11 - OFF
In mobo's manual this diagnostic LEDs are grouped in 4 groups and the description of the group that most closely resembles my case is - "Testing base and Extended memory etc." But I'm not sure that I'm identifying the problem correctly, because of the LEDs that are OFF.
Quote from: Jack the Newbie
Are you experiencing any freeze and/or stability problems appart from the described problem?
No, as I said in my initial post, once it get past this stage everything is running smoothly - OS boots and all software, including the most demanding games or tests, are running OK. -
Problems with Upload record to Infotype 2010 together with Cost Assignment (PREF)
Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank youHi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you
Maybe you are looking for
-
How do i sync a voice memo to my mac?
How do I sync a voice memo to my mac?
-
Organizing by Album Name, Not Year?
Hi, I'm a newly converted Mac user. Everything has been fabulous so far, and I'm overall very happy with iLife. There's one thing that annoys me about iPhoto, though. That is the fact that, after I import my photos, iPhoto automatically sorts them by
-
How to generate a mail into the SAP Inbox
Hi everyone, I have an MM Workflow that is starting correctly and a mail is supposed to be generated in the user Inbox in SAP after the completion of a material enhancement but it does not. The Workflow was copied from another system and it was worki
-
How do I uninstall photoshop cs-2
how do I uninstall photoshop cs-2
-
Spiceworks SQL disks vs disk_partitions vs physical_disks
I am attempting to write a custom SQL query to display all of the disk related information for a client of mine. They have one server that has multiple iSCSI LUNs connected to the server. I would like to show from iSCSI LUN all the way down to Wind