Problem with SLQ Date and Daylight Saving Time
Hi everybody!
It seems, that when I have a date in the database, which falls on start of the daylight saving period, it is converted to the previous date.
Example: '2001-10-13' will become '2001-10-12' after doing a date = rs.getDate() and then converting back using date.toString().
This caused a lot of trouble because the date value is part of an unique key constraint!
Currently I wrote a wrapper method, which obtains the date as string and converts this one into a date by setting the hours to 12:00.
Does anybody know a straighter way to avoid the conversion?
Because the default time zone is using day light saving time. To remove this feature, reset your default time zone at the very beginning of your program:
TimeZone.setDefault( new SimpleTimeZone( TimeZone.getDefault().getRawOffset(), TimeZone.getDefault().getID() );
Similar Messages
-
Hello,
We are approaching this time of the year again...
I would like to redirect you to the Support Note 1370083.1 "Oracle WebLogic Server (WLS), Time Zones, and DayLight Saving Time (DST) Changes"
This note lists what is to be expected from WebLogic Server regarding this time change period, in terms of behavior, both for the engine and the applications deployed onto WLS.
Regards,
Patrick.Probably this:
http://www.jdocs.com/castor/0.9.5.3/api/org/exolab/castor/xml/handlers/DateFieldHandler.html -
I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.
Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.
-
Conversion mapping is losing time zone data during daylight saving time
We have a problem with conversion of Calendars to timestamp with timezone for the last hour of Daylight Saving Time (e.g. 01:00 EDT - 01:59 EDT) where it is being interpreted as Standard Time which is in reality 60 minutes later.
We've written a JUnit test case that runs directly against TopLink to avoid any issues with WAS and its connection pooling.
The Calendar theDateTime comes from an object called TimeEntry which is mapped to a TIMESTAMP WITH TIMEZONE field using conversion mapping with Data Type TIMESTAMPTZ (oracle.sql) and Attribute Type Calendar (java.util).
We are using:
Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build Patch for Bugs 5145690 and 5156075)
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
Oracle JDBC driver Version: 10.2.0.1.0
platform=>Oracle9Platform
Execute this Java:
SimpleDateFormat format = new SimpleDateFormat("MM/dd/yyyy HH:mm z");
TimeZone tzEasternRegion = TimeZone.getTimeZone("US/Eastern");
Calendar theDateTime = Calendar.getInstance(tzEasternRegion);
theDateTime.setTime(format.parse("10/29/2006 01:00 EDT"));
Persist to the database and execute this SQL:
SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
FROM time_table WHERE time_table_id=1
This provides the following results:
THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
The wrong time zone is in the database. It should be EDT -4. Let's test the SQL that should be generated by TopLink. It should look like the following.
Execute this SQL:
UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 US/Eastern','mm/dd/yyyy HH24:MI TZR') WHERE (time_table_id=1)
SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
FROM time_table WHERE time_table_id=1
This provides the same results:
THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
Now, execute this SQL:
UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 EDT US/Eastern','mm/dd/yyyy HH24:MI TZD TZR') WHERE (time_table_id=1)
SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
FROM time_table WHERE time_table_id=1
This provides better results:
THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EDT -4
The correct time zone is now in the database. Let's test reading this with the following Java:
System.out.println("cal= " + theDateTime);
System.out.println("date= " + theDateTime.getTime());
System.out.println("millis= " + theDateTime.getTimeInMillis());
System.out.println("zone= " + theDateTime.getTimeZone());
This provides the following results:
cal= java.util.GregorianCalendar[...]
date= Sun Oct 29 01:00:00 EST 2006
millis= 1162101600000
zone= sun.util.calendar.ZoneInfo[id="US/Eastern",...]
The TimeZone object is correct since we are using the US/Eastern regional time zone, but the millis are wrong which makes the time EST instead of EDT. The millis should be 1162098000000.
The conversion from java.util.Calendar to TIMESTAMPTZ loses the actual offset when setting to a regional time zone. It can maintain this info by specifying it explicitly.
The conversion from TIMSTAMPTZ to java.util.Calendar also loses the actual offset even if the correct offset is in the database.
Has anyone else encountered this conversion problem? It appears to be a conversion problem in both directions. I know that the Calendar is lenient by default and will assume Standard Time if time is entered during the repeated 1 o'clock hour at the end of Daylight Saving Time, but the Calendars we are using are explicit in their time, so this would be classified as data corruption.
NikOpened an SR. Looks like there is a problem with conversion either in TopLink or in JDBC.
-
Clock UI control and daylight saving time.
Hi,
We have a customer that has several sites around the world.
In a VC-model I like to use the Clock UI control to display the times of the different sites.
This can be done by setting the time zone in the control properties.
A long ago we have introduced daylight saving time.
It seems that the clock control does not do anything with this ?
How can I change the time zone when the model is running ?
Can it be done by an expression and how ?
There is also a problem of the country, some have DST, others dont.
See http://en.wikipedia.org/wiki/Daylight_saving_time_around_the_world
Example:
I have 2 clocks and the end-user lives in Amsterdam:
Amsterdam, time zone = GMT + 1
Santiago, time zone = GMT 4
During the winter in Amsterdam it is summer in Santiago and has daylight saving so the time in Santiago should be GMT 3 in stead of GMT -4.With the current version of VC / flash, it is not possible to display the correct time all the year 'round.
If you only want to show the (user) current time then you can use this VC clock object.
If you need to show clocks from different cities around the world, than its better NOT to use the VC clock.
Because you can not define the country and city in the clock properties, that determine the use of DST, it will not always show the correct (default / DST) time.
Solution:
Add a HTLM-view to your model with a links to a web clock.
Nice (free !) clocks can be found (and customized) on <a href="http://www.worldtimeserver.com/clocks/wtsclock001.aspx">worldtimeserver.com</a> or <a href="http://www.timeanddate.com/clocks/free.html">timeanddate.com</a> .
Example:
For the city Santiago (Chile) the URL =
http://free.timeanddate.com/clock/ielrw91/n232/tluk/fn13/fs16/fc009/tt0/tw1/td2/th1/ts1/tb4 -
Problem with Java Dates and UPDATE for SQL2000
I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee -
Java 1.4 and Daylight Saving Time 2007
The current version of Java 1.4.2 for Tiger, 'Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-244)' does not handle the new 2007 Daylight Saving Time rules correctly. Will Apple be updating Java 1.4.2 to the version that does support 2007 DST correctly? (at least 1.4.2_11 is required per Sun, http://java.sun.com/developer/technicalArticles/Intl/USDST/).
If so, when? Thanks!Since you didn't list your computer, here's a link to Java 5.0 release 4 for both PPC and Intel-based Macs, which came out in April: http://search.info.apple.com/?q=J2SE50Release4.dmg&type=kbdload&search=Search&lr =lang_en&search=Go. That should solve your problem.
-
TimerThreads and daylight saving time
I have this task that I need to do everyday at 0:00 AM.
I am using the ScheduleAtFixedRate method to perform this starting it at 0:00 AM and running it again every 24 hours. It is very important to run at 0:00 because it involves money a a reconciliation file.
According to the API documentation:
Fixed-rate execution is appropriate for recurring activities that are sensitive to absolute time, such as ringing a chime every hour on the hour, or running scheduled maintenance every day at a particular time.
My question is what about daylight-saving time ? What happens to such a task that is supposed to run every day at 0:00 ?
Thanks
Luis CordeiroMy guess, and it is just a guess, is that the task will run every 24 hours, and therefore after a daylight saving time switch you will find it running at 01:00 or at 23:00. But I would suggest you test for yourself. Set up a test program that schedules a task every 3 hours, change your system's date and time to be 5 hours before the end (or start) of DST, and see what happens after it runs for 6 hours.
-
TimeZone getDisplayName and Daylight Saving Time
Hi all,
Is this a good way to get "CST"/"CDT" accurately?:
// Determine whether or not we're in Daylight Saving Time
// (affects the CST/CDT/etc. printing in the output).
boolean isDst = false;
if (cal.get(Calendar.DST_OFFSET) != 0) {
isDst = true;
Thanks so much :-)I'd use one of the TimeZone methods, for instance inDaylightTime(date); one of the other DST methods may work better for you.
-
Castor and Daylight Saving Time 2007 Changes
Hi,
Can anyone tell me if Castor will be affected by the changes to Daylight Saving Time (DST) in the US in 2007?
ThanksProbably this:
http://www.jdocs.com/castor/0.9.5.3/api/org/exolab/castor/xml/handlers/DateFieldHandler.html -
Events created around 4/6/2002 at 8pm get created with the wrong time (9pm) and there are several other creation and display problems tied to Daylight Savings in April and October. Version 5.1 of the software seems to fix that but we are looking for a fix until we can upgrade. We have been using Windows systems to access the calendar.
Thanks.We have not seen exactly this, but many users appointments are lining up in the wrong time slots. Also, when scheduling, the time display is off by an hour. We have found what looks like a temporary fix.
We noticed that the problem only affects users who have the start of the week set to Sunday (when daylight savings time started). Setting the week to start on Monday fixed our display problems (you can do it in the users, options section).
I am placing a support call w/SUN. -
Problem with Inserting Date and Time in Oracle 8i
I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kanwal:
I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
<HR></BLOCKQUOTE>
Hey Kanwal,
You can try the following statement
UPDATE TABLE_NAME SET DATE_COLUMN = to_date('08/16/2000 12:45:00','mm/dd/yyyy HH:MI:SS'
WHERE .... ;
null -
SG-300 28P switches problem with VLAN Data and Voice, working all the time as Voice VLAN
Hi Everyone,
Thank you very much for your help in advance. I’m pulling my hair to fix the problem.
I just got the new SG-300 28P switches. My Bios ordered for me. I did not know how it runs until now... not an IOS based. I really do not know how to configure it.
I have 2 VLAN are Data and Voice.
- Data VLAN ID is 2 IP 192.168.2.X/255.255.255.0
- Voice VLAN ID is 200 IP 192.168.22.X/255.255.255.0
- I created two vlans, in switch, Data and Voice.
- On the port number 28, it is trunk by default, so I add Data vlan ID 2 tagged.
- On the port number 26, it is trunk by default, so I add Voice vlan ID 200 tagged.
- On the port number 27, I add Data vlan ID 2 tagged for Data vlan out.
- Port settings No.1
I set it up as Trunk with Data vlan 2 untagged, and 200 Tagged (voice vlan). I plugged in a phone with a pc attached. But the PC will get to the vlan 200 to get the DHCP address, but no from vlan 2. The Phone works with correct vlan ip.
- Port settings No.2
Trunk with vlan 1UP, 2T, and 200T. The phone is even worse. Would never pick up any IP from DHCP.
- Port settings No.3
Access with 200U...of course the phone will work... and the PC could not get to its own vlan. Instead, the PC got an ip from the voice vlan. Not from VLAN 2.
I have Linksys phone I’m not sure if this help.
For more information I setup in switch,
- enable voice vlan
- set the port on auto voice vlan
- enable LLDP-MED globally
- create a network policy to assign VLAN 200
- assign this network policy to the port the phone is connected to.
I hope this information help to help me to setup Data and Voice vlans, to plug the phone to work with vlan Voice 200 (IP rang 192.168.22.X), from phone to Pc and pc work as Data vlan 2 (IP rang 192.168.2.X).I just got done setting up voice VLANs on an SF 300-24P and verified working. This was working with Cisco 7900 series phones connected to a Cisco UC setup.
Here's my sample config.
Note that I edited this by hand before posting, so doing a flat out tftp restore probably won't work. However, this should give you a clue. Also, don't take this as 100% accurate or correct. I've only been working with these things for about a week, though I've worked with the older Linksys SRW switches for a couple of years. I'm a CCNP/CCDP.
VLAN 199 is my management VLAN and is the native VLAN on 802.1q trunks.
VLAN 149 is the data/computer VLAN here.
VLAN 111 is the voice/phone VLAN here.
VLAN 107 does nothing.
interface range ethernet e(1-24)
port storm-control broadcast enable
exit
interface ethernet e1
port storm-control include-multicast
exit
interface ethernet e2
port storm-control include-multicast
exit
interface ethernet e3
port storm-control include-multicast
exit
interface ethernet e4
port storm-control include-multicast
exit
interface ethernet e5
port storm-control include-multicast
exit
interface ethernet e6
port storm-control include-multicast
exit
interface ethernet e7
port storm-control include-multicast
exit
interface ethernet e8
port storm-control include-multicast
exit
interface ethernet e9
port storm-control include-multicast
exit
interface ethernet e10
port storm-control include-multicast
exit
interface ethernet e11
port storm-control include-multicast
exit
interface ethernet e12
port storm-control include-multicast
exit
interface ethernet e13
port storm-control include-multicast
exit
interface ethernet e14
port storm-control include-multicast
exit
interface ethernet e15
port storm-control include-multicast
exit
interface ethernet e16
port storm-control include-multicast
exit
interface ethernet e17
port storm-control include-multicast
exit
interface ethernet e18
port storm-control include-multicast
exit
interface ethernet e19
port storm-control include-multicast
exit
interface ethernet e20
port storm-control include-multicast
exit
interface ethernet e21
port storm-control include-multicast
exit
interface ethernet e22
port storm-control include-multicast
exit
interface ethernet e23
port storm-control include-multicast
exit
interface ethernet e24
port storm-control include-multicast
exit
interface range ethernet g(1-4)
description "Uplink trunk"
exit
interface range ethernet g(1-4)
switchport default-vlan tagged
exit
interface range ethernet e(21-24)
switchport mode access
exit
vlan database
vlan 107,111,149,199
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 107
exit
interface range ethernet e(21-24)
switchport access vlan 111
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 111
exit
interface range ethernet e(1-20)
switchport trunk native vlan 149
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 149
exit
interface range ethernet g(1-4)
switchport trunk native vlan 199
exit
voice vlan aging-timeout 5
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
voice vlan oui-table add 108ccf MyCiscoIPPhones1
voice vlan oui-table add 40f4ec MyCiscoIPPhones2
voice vlan oui-table add 8cb64f MyCiscoIPPhones3
voice vlan id 111
voice vlan cos 6 remark
interface ethernet e1
voice vlan enable
exit
interface ethernet e1
voice vlan cos mode all
exit
interface ethernet e2
voice vlan enable
exit
interface ethernet e2
voice vlan cos mode all
exit
interface ethernet e3
voice vlan enable
exit
interface ethernet e3
voice vlan cos mode all
exit
interface ethernet e4
voice vlan enable
exit
interface ethernet e4
voice vlan cos mode all
exit
interface ethernet e5
voice vlan enable
exit
interface ethernet e5
voice vlan cos mode all
exit
interface ethernet e6
voice vlan enable
exit
interface ethernet e6
voice vlan cos mode all
exit
interface ethernet e7
voice vlan enable
exit
interface ethernet e7
voice vlan cos mode all
exit
interface ethernet e8
voice vlan enable
exit
interface ethernet e8
voice vlan cos mode all
exit
interface ethernet e9
voice vlan enable
exit
interface ethernet e9
voice vlan cos mode all
exit
interface ethernet e10
voice vlan enable
exit
interface ethernet e10
voice vlan cos mode all
exit
interface ethernet e11
voice vlan enable
exit
interface ethernet e11
voice vlan cos mode all
exit
interface ethernet e12
voice vlan enable
exit
interface ethernet e12
voice vlan cos mode all
exit
interface ethernet e13
voice vlan enable
exit
interface ethernet e13
voice vlan cos mode all
exit
interface ethernet e14
voice vlan enable
exit
interface ethernet e14
voice vlan cos mode all
exit
interface ethernet e15
voice vlan enable
exit
interface ethernet e15
voice vlan cos mode all
exit
interface ethernet e16
voice vlan enable
exit
interface ethernet e16
voice vlan cos mode all
exit
interface ethernet e17
voice vlan enable
exit
interface ethernet e17
voice vlan cos mode all
exit
interface ethernet e18
voice vlan enable
exit
interface ethernet e18
voice vlan cos mode all
exit
interface ethernet e19
voice vlan enable
exit
interface ethernet e19
voice vlan cos mode all
exit
interface ethernet e20
voice vlan enable
exit
interface ethernet e20
voice vlan cos mode all
exit
interface ethernet e1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e5
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e6
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e7
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e8
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e9
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e10
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e11
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e12
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e13
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e14
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e15
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e16
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e17
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e18
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e19
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e20
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e21
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e22
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e23
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e24
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e1
lldp med notifications topology-change enable
exit
interface ethernet e2
lldp med notifications topology-change enable
exit
interface ethernet e3
lldp med notifications topology-change enable
exit
interface ethernet e4
lldp med notifications topology-change enable
exit
interface ethernet e5
lldp med notifications topology-change enable
exit
interface ethernet e6
lldp med notifications topology-change enable
exit
interface ethernet e7
lldp med notifications topology-change enable
exit
interface ethernet e8
lldp med notifications topology-change enable
exit
interface ethernet e9
lldp med notifications topology-change enable
exit
interface ethernet e10
lldp med notifications topology-change enable
exit
interface ethernet e11
lldp med notifications topology-change enable
exit
interface ethernet e12
lldp med notifications topology-change enable
exit
interface ethernet e13
lldp med notifications topology-change enable
exit
interface ethernet e14
lldp med notifications topology-change enable
exit
interface ethernet e15
lldp med notifications topology-change enable
exit
interface ethernet e16
lldp med notifications topology-change enable
exit
interface ethernet e17
lldp med notifications topology-change enable
exit
interface ethernet e18
lldp med notifications topology-change enable
exit
interface ethernet e19
lldp med notifications topology-change enable
exit
interface ethernet e20
lldp med notifications topology-change enable
exit
interface ethernet e21
lldp med notifications topology-change enable
exit
interface ethernet e22
lldp med notifications topology-change enable
exit
interface ethernet e1
lldp med enable network-policy poe-pse
exit
interface ethernet e2
lldp med enable network-policy poe-pse
exit
interface ethernet e3
lldp med enable network-policy poe-pse
exit
interface ethernet e4
lldp med enable network-policy poe-pse
exit
interface ethernet e5
lldp med enable network-policy poe-pse
exit
interface ethernet e6
lldp med enable network-policy poe-pse
exit
interface ethernet e7
lldp med enable network-policy poe-pse
exit
interface ethernet e8
lldp med enable network-policy poe-pse
exit
interface ethernet e9
lldp med enable network-policy poe-pse
exit
interface ethernet e10
lldp med enable network-policy poe-pse
exit
interface ethernet e11
lldp med enable network-policy poe-pse
exit
interface ethernet e12
lldp med enable network-policy poe-pse
exit
interface ethernet e13
lldp med enable network-policy poe-pse
exit
interface ethernet e14
lldp med enable network-policy poe-pse
exit
interface ethernet e15
lldp med enable network-policy poe-pse
exit
interface ethernet e16
lldp med enable network-policy poe-pse
exit
interface ethernet e17
lldp med enable network-policy poe-pse
exit
interface ethernet e18
lldp med enable network-policy poe-pse
exit
interface ethernet e19
lldp med enable network-policy poe-pse
exit
interface ethernet e20
lldp med enable network-policy poe-pse
exit
interface ethernet e21
lldp med enable network-policy poe-pse
exit
interface ethernet e22
lldp med enable network-policy poe-pse
exit
lldp med network-policy 1 voice vlan 111 vlan-type tagged
interface range ethernet e(1-22)
lldp med network-policy add 1
exit
interface vlan 199
ip address 199.16.30.77 255.255.255.0
exit
ip default-gateway 199.16.30.3
interface vlan 1
no ip address dhcp
exit
no bonjour enable
bonjour service enable csco-sb
bonjour service enable http
bonjour service enable https
bonjour service enable ssh
bonjour service enable telnet
hostname psw1
line console
exec-timeout 30
exit
line ssh
exec-timeout 30
exit
line telnet
exec-timeout 30
exit
management access-list Management1
permit ip-source 10.22.5.5 mask 255.255.255.0
exit
logging 199.16.31.33 severity debugging description mysysloghost
aaa authentication enable Console local
aaa authentication enable SSH tacacs local
aaa authentication enable Telnet local
ip http authentication tacacs local
ip https authentication tacacs local
aaa authentication login Console local
aaa authentication login SSH tacacs local
aaa authentication login Telnet local
line telnet
login authentication Telnet
enable authentication Telnet
password admin
exit
line ssh
login authentication SSH
enable authentication SSH
password admin
exit
line console
login authentication Console
enable authentication Console
password admin
exit
username admin password admin level 15
power inline usage-threshold 90
power inline traps enable
ip ssh server
snmp-server location in-the-closet
snmp-server contact [email protected]
ip http exec-timeout 30
ip https server
ip https exec-timeout 30
tacacs-server host 1.2.3.4 key spaceballz timeout 3 priority 10
clock timezone -7
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 199.16.30.1
sntp server 199.16.30.2
ip domain-name mydomain.com
ip name-server 199.16.5.12 199.16.5.13
ip telnet server -
Converting unix timestamp to date after Daylight Saving Time change
Hello,
in one of the products we use the internal scheduler stores dates (and times) in an Unix-like format, that is seconds since 1st of January 1970. We have used this SQL to extract the actual date:
TO_CHAR(t.next_fire_time/(24*60*60*1000) +to_date('19700101020000','yyyymmddhh24miss'),'yyyymmddhh24miss')
Everything worked fine until the time has changed this weekend from UTC+2 to UTC+1 (we are located in Eastern Europe). Since then the query above returns one hour later than it should.
I.e. timestamp *1320067800000* is returned as *20111031153000* even thought correct is (and the actual time the event was scheduled) *31-OCT-11 02.30.16.000000 PM*
I found queries like this on different forums and no one seems to worry much about the daylight savings. Is this a configuration issue in the DB or is it a bug in our code?
I tried selecting the SESSIONTIMEZONE and DBTIMEZONE and both were +1.
Any help appreciated.Your problem is hard-coded 2hour offset:
to_date('19700101<font size=5 color=red>02</font>0000','yyyymmddhh24miss')You need to calculate current offset to adjust it to current DST situation:
with sample_table as (
select date '1970-01-01' + 1320067800000 / 1000 / 3600 / 24 dt_utc from dual
select dt_utc,
dt_utc +
extract(
timezone_hour
from
from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
) / 24 dt_prague,
extract(
timezone_hour
from
from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
) tz_offset
from sample_table
DT_UTC DT_PRAGUE TZ_OFFSET
2011-10-31 13:30:00 2011-10-31 14:30:00 1
SQL> SY. -
Problem with Software update and n70 Branded Tim
Excuse me just before for my no fluenty english.
I'd tried to flash my phone N70 Fw. v2.x branded 3 Italy to new version 5.x branded 3 Italy and all have finish ok, but
when i'd tried to flash my N70 fw. v3.x branded TIM to new fw 5.x the flash was ok but the Themes, the screen saver, and the multimedia button wasn't correctly installed.
When i went to change themes i can see one theme called TIMN70_2nd.skn but the option for it is delete it or exit.
If i try to delete it not work..
I want my old screen saver, desktop and theme of TIM branded
Can anyone help me?
It's a problem of firmware or Software Update?For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?
Maybe you are looking for
-
Error while creating contract wrt pr
hi i am creating a pr for cotract, via me51n..selecting outline agr req..then creating pr for a raw material... i m releasing this pr in 54n...now i go to 31k...i select wrt pr....now when i give my pr no. i get this error message "Requisition doc. t
-
Cannot be read from or Written to. And cannot eject ipod! PLEASE HELP
I'm having tonnes of problems with my ipod and itunes: 1. I just bought a brand new macbook, and wanted to put all the music from my ipod onto my macbook, So i followed the directions on here for how to do that. incidentally, it did not work, and i w
-
Section Master Objects Every Other Page
Hello, I am using Pages version 5.1 and I have a 13 pages document that gives me the following trouble: I have section master objects and headers that appear just every other page. There only a single section for the whole document. Why is this happ
-
Unable to install Reader on OS X 10.7.5
Have gone through download and install process, and the install app seems to run, but then the application just isn't there. Have looked at security settings in Safari, but I do not have the option to allow Java, only Javascript. Any ideas appreciate
-
KM2M Combo -L MS 6738 MB with VIA NIC
When I try to install Norton Internet Security or any other Firewall the TCPIP install on my WIN 98 SE goes away. The NIC is not enabled after the install. I try to reinstall the NIC and it does not work (will not install.) Teh adapter is a VIA Rhi