Problem with the portal on 64bit computer(s)

None of the replies fixed the issue but after doing more troubleshooting I am starting to narrow the issue down.  I am going to start a new post with my new findings.
Hello
Wondering if this is a known issue or not.  I am having troubles with windows 7 x64 machines getting a blank page when getting to the portal.
I can get to it just fine on my 32bit machine but when I login on a 64bit machine the silver light part does not load. I have tried adding the site to both trusted and/or local intranet zones with no change.
If this a known issue is there a work around?

You would need Silverlight for the 64bit browser, which I am not sure even exists. You probably have Silverlight for 32bit browser installed and working fine.
Cheers,
Anders Spælling
Senior Consultant
Blog:  
Twitter:   LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

Similar Messages

  • I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

    When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

    Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
    I've tried windows update but this doesn't do anything as '...the service is not running'.
    Any suggestions?

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • Problem with the creation of the _pageflow folder in the portal project

    Hi,
    I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
    Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
    Please help.
    Thanks & Regards
    Prakash.

    Hi Dmitry,
    What state are the tasks in?  Are they in Active, Running, or Completed?  There will only be output files if the tasks are in state running or completed.
    Additionally, what is the status of the pool which the tasks ran on?  If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost.  This is because the files of the tasks reside on the VM which ran
    the task.
    Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
    passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
    It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
    here - it also has some code snippets for how BatchExplorer performs the operations that it does.
    Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

  • Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

    Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
    Thanks!
    Angela

    You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
    I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
    Best of luck.

  • The cursor on my iMac freezes, and I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard ... it is internal. How do I fix this??

    The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?

    ClassicII wrote:
    Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
    The cost to get this repaired is more than what you could find another used imac for.
    I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity.

  • I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

  • Photoshop CC 2014 having a problem with display driver then crashes computer

    Since the Photoshop update in October most of the time when I open Photoshop CC 2014, either my computer crashes with the driver state power failure or the program is able to boot and provide an error message involving a problem with the display driver and then my computer crashes with the driver state power failure. I did not have this problem until the update in October. Any help would be greatly appreciated.
    I am using Windows 8.1 64-bit
    Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz processor
    12.0 GB of RAM
    NVIDIA GeForce GTX 860m
    Intel HD Graphics 4600
    All drivers and programs are up to date.

    VHail wrote:
    …All drivers and programs are up to date.
    You need to update your video driver from the website of the manufacturer of your video card.  You cannot rely on Windows Update or Microsoft, which typically have outdated drivers.

  • Problems with the new itouch...

    I got the new touch less than a month ago. Now he is not charging or conecting to any computer. I tried mine and a friend's and neither worked. Can this be a problem with the ipod or could it be the cable?

    If you have the 5G iPod is could be the cable some users are reported either an initial defective cable or a cable that became defective after a short time.

  • Communication Problem with the second battery

    Hello,
    In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
    Thanks Lina

    Hi, Lina
    What is the machine type and model of your computer? Also, what operating system are you running?
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

    I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years,
    I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation.  All other synchronisation areas (eg Contacts, Notes etc) work fine.
    I have looked for help through the Apple Support Community and tried many things.  I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
    What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from  my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether.  I need to have a properly synchronising calendar on my phone.  Do you have any suggestions?

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

    I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
    Do you have Verizon Fios Internet?
    Are you on the 20/5 connection?
    If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
    I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
    Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
    When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
    I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
    From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
    His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
    The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
    The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
    My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
    Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
    We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
    I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
    This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
    We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
    This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
    If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
    My contact information,
    I have left this out here, you can contact me on these forums...

    Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
    Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
    Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
    Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
    Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
    We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
    It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
    Just strange that one computer can effect all the other computers on the network, even when it is shut down...
    I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
    So now we have three choices,
    We can go back to Windows XP.
    We can buy a new NIC or a wireless card to replace the RealTek...
    Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
    Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
    Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
    Message Edited by keiser0619 on 08-06-2009 03:58 PM

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

Maybe you are looking for