Problem with Transport Layer
Hello every body,
We are doing an upgrade from 4.6C to ECC6. we have imported a transport request from 4.6C to ECC6.
When I change the transport layer of a package that is newly imported and save it, the system prompts for a local work bench request. How do I save it in a transportable request instead of local work bench request?
Regards,
Praveen
Hi
just as I wrote that behavior should be ok, so after creating the local request (so after changing the layer)
- Run SE09 and explode the node of the local request where package is
- Place the cursor on the package and delete it from the request
- Run SE80, choose your package and change the descrption: now the system should create a transportable request.
U make sure the layer is correct for the new system
Max
Similar Messages
-
STMS problem with transport import
Hello all
I had a problem with transports in STMS.
Log history of imported transport didn't show any error and simophore is green.
But in target system data element wasn't presented.
When i import this transport again - it's all ok.
It happened twice. And i didn't find any solutions yet.((
Did anyone have the same problem???Start import LIMUMETH/NPQ/CL_RESERVATION SPLIT_RESERV ...
0 entries from SMODILOG (CLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CVCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CUCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (PRCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (SVCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CICLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
method SPLIT_RESERVATION include /NPQ/CL_RESERVATION===========CM01Z will be impor
REPOS /NPQ/CL_RESERVATION===========CM01M A replaced.
End of import LIMUMETH/NPQ/CL_RESERVATION SPLIT_RESERV
E071-LOCKFLAGs 000016 - 000016 updated ('2', 1 entries).
E071C entries 000016 - 000016 deleted (1 entries).
report /NPQ/CL_RESERVATION===========CM01M (L) synchronized.
report /NPQ/CL_RESERVATION===========CP (L) synchronized.
169836 5330910
LIMUTABD/NPQ/LOCATION_HIERARCHY_QRY was not imported in this step
LIMUTABD/NPQ/RESERV_ROOM_SERVICE_STR was not imported in this step
LIMUTABD/NPQ/RES_SERVICE was not imported in this step
LIMUTABD/NPQ/RES_SERVICE_DETAILS was not imported in this step
Start import LIMUWAPP/NPQ/FM SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM SERVICE/GETS ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/GETS ...
0 entries from SMODILOG (WAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIO
0 entries from SMODISRC (CVWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CUWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (PRWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (SVWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CIWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 d / 0 i / 2 u / 1 = 33% ucf O2PAGCON
3 entries for O2PAGCON imported (TR/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 1 u / 0 = 0% ucf O2PAGDIR
1 entry for O2PAGDIR imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 0 u / 4 = 100% ucf O2PAGDIRT
4 entries for O2PAGDIRT imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 0 u / 1 = 100% ucf O2PAGEVH
1 entry for O2PAGEVH imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %) d
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %) d
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %)
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %)
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
End of import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/GETS
R3TRDTEL/NPQ/DELIVERY_POINT was not imported in this step
R3TRDTEL/NPQ/SRV_POINT was not imported in this step
E071-LOCKFLAGs 000021 - 000025 updated ('2', 5 entries).
E071C entries 000021 - 000025 deleted (5 entries).
DEVK902177 touched.
table O2PAGDIR (R) synchronized.
1 tables in P-buffer synchronized.
2 tables in R-buffer synchronized.
42832 5373742
158359 bytes read.
Transport overhead 15.3 %.
Data compressed to 5.3 %.
Duration: 14 sec (11311 bytes/sec).
1 0
Summary:
15 REPOS imported.
Totally 15 Objects imported.
Totally 1551 tabentries imported.
5373742 bytes modified in database.
[dev trc ,00000] Thu Mar 03 18:26:16 2011 13410099 13.410099
[dev trc ,00000] Disconnecting from ALL connections: 21 13.410120
[dev trc ,00000] Disconnecting from connection 0 ... 33 13.410153
[dev trc ,00000] Now I'm disconnected from SAP DB 4897 13.415050
[dev trc ,00000] Disconnected from connection 0 63 13.415113
[dev trc ,00000] statistics db_con_commit (com_total=17, com_tx=17) 26 13.415139
[dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 25 13.415164
Disconnected from database.
End of Transport (0000).
date&time: 03.03.2011 - 18:26:16
Main import
End date and time : 20110303182616
| Ended with return code: ===> 0 <=== -
Hi,
I have a problem with transporting from DEV to PROD. There are no imports in import queue in SMTS.
I can export data from DEV, but there are not displayed in STMS. (Only texts as Language Netweaver 04 SR1 CS).
In TMS alert viewer there are a lot of errors. F.E. READ_DOCU_FAILED, RFC_SYSTEM_FAILURE, TP_REPORTED_ERROR (Transport control program tp ended with error code 0012).
We had no problems with this before but the old transports are not displayed in gueue too.
The RFC connection seems to be ok.
Can anybody help?
Thanks
RadkaHi,
it seems does not help.
But I found a problem in transport groups.
If i run a check of transport groups. The error message "System DWP cannot read test file written by DWD" is displayed.
"When the system checked the transport groups, it discovered that system DWP cannot read a test file written by system DWD to the transport directory. The return code of the action was 0008"
DWD=DEV
DWP=PROD
Can anybody help? Or does somebody know, where sap creates the test file? Or the name of the test file...
Thanks
RH -
I have a problem with Transport the personalization of standard ess compone
I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02. -
Player compatibility problem with dual layer media
I've created a dual layer DVD and there is a problem with compatibility from player to player.
It plays fine in one of my DVD players but will not load in the other.
The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
-Jake -
Having problem with applying layer style "stroke" to group
- Windows 8.1 / 64bit
- i3-4150 / 4GB / Geforce GTX 750 TI
- Photoshop CC 2014
Hi!
I don't know why, but there is some problem that applying layer style "stroke" to group.
When i make a group with some layer and apply to group a layer style-stroke with inside option,
the strokes looks like grid are generated inside.
Why i said that stroke cross to ㅎrid, because it looks like grid if i make that group bigger.
(that black square is 'Rectangle 1' layer. Just resizing bigger than before)
Does anyone have same problem with me?
Please, I need your help..pillfish wrote:
I am having the same problem. it happens every time in cc and cc 2014. I am back using cs6. Which seems to run better on the whole.
That's interesting. And this is happening with CC and CC 2014? Do you have all the updates for the Photoshop CC versions?
I've just tried to duplicate it without success, (windows 7, GTX570) so I wonder if there is a condition that triggers it? Unfortunately, with this being such an old thread, the only person still around is R Kelly.
OK, I just thought to try it on my Cintiq Companion 2, which has Windows 8.1 and Intel 5100, and the bug occurred. I actually got as far as firing up my Win 8.1 laptop before remembering that I had to sign out of CC to put it on my Cintiq, so I only have CS6 on it.
Anyway.... looks like the bug is still there. Are you using Win 8.1? -
Problem with BMM layer warning messages.
Hi,
I have modelled with the following tables in BMM layer.
Dimension tables: Regions,Countries,Departments, locations, Employees, jobs, job history
Fact table: HR Facts (measured columns like salary, max salary, min salary, commission)
The model is consistent with the following warnings:
Logical dimension table REGIONS has a source REGIONS that does not join to any fact source.
Logical dimension table DEPARTMENTS has a source DEPARTMENTS that does not join to any fact source.
Logical dimension table COUNTRIES has a source COUNTRIES that does not join to any fact source.
Logical dimension table LOCATIONS has a source LOCATIONS that does not join to any fact source.
and also in the answers section (Presentation services) i could not able to view data, it's giving the following error (when i am trying to display REGION NAME field values)
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: REGIONS.REGION_NAME. Please fix the metadata consistency warnings. (HY000).
I could not able to trace the problem where exactly is to be fixed.
regards
chandra kanth.Hi,
Thanks for the information. Ideally that works out without any hierarchies. But the problem with which i was facing is somewhat different.
Let me explain the problem scenario exactly:
I have an employee, region tables in physical layer. Employee table has SALARY Column. Region table dont have any
join with Employee table. In BMM layer i have created a fact table "HR Facts" and crated a logical fact column SALARY.
The logical fact table source is Employee table. I have drag dropped Region table into BMM layer and joined with HR
Facts table. While consistency check its given a warining message: Logical dimension table REGIONS has a source
REGIONS that does not join to any fact source.
What is the problem exaclty?
regards
chandra kanth. -
Problems with Transport Management System
Hi All,
i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
Regards,
Abhishek Jain -
Problems withe transport example
Hi,
I'm trying out Oracle lite 10g on Windows XP. I've installed the mobile server with examples and now I want to install the Mobile Client on the Win32 Device. After synchronising I tried to install the transport application. This works without error messages. Then I opend the update-window (I think ist the one in the start-menue) but there is nothing to install. I find no transport.exe on the whole device.
Then I looked on the Mobile-Server. There are two transport.exe files in the folder <oracle home>\Mobile\Server\samples\Transport\Win32\bin and <oracle home>\mobile_oc4j_\j2ee\home\applications\mobileserver\samles\Transport_win32.
What's going wrong with my installation?
Best Regards
MarkHello Jorge,
I have the same problem with PPC2002. I posted this problem at September 17th. But nobody replied.
Problem registering PPC 2000 Client
The Device can't register with the Device Manager on the Server. I updated the firmware of my client and everything else what I thought could cause the problem.
What language has the PPC2003 system of your device?
Perhaps the problem is that only the english PPC2003/2 system is supported. Because I have the german version of PPC2002. Hopefully someone from Oracle or someone else responds to this thread. -
Problem with Gradient Layer and second layer with opaque object
I opened a new document with a white background. I then used the gradient tool under the paint bucket to make a blue sky fading to white. I then created a second layer to put a sun in with diffuse edges, so as to not have just a round yellow ball. Problem is, the yellow sun comes out fine on its' transparent layer, but when I turn on the gradient layer, it gets a blue tinge from the sky and is really only half visible. An example is below. Please help. Thanks in advance.
I'd guess, without seeing your layers palette, that your sun image is partially transparent and as such some of the blue sky is mixing with it, yielding the green color you see.
It really boils down to what you want it to look like. If you're shooting for more or less a "child's" style drawing of a big yellow ball, make the brush you draw the sun with have a harder edge, and paint it in so that the central pixels are opaque. Make sure the sun's above other layers that could influence the result.
It might be good if you screen grabbed your layers palette and posted it.
-Noel -
Strange noise problem with music layer after replacing the music file using script in CS6
Hey guys,
I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
Does anyone know what's going on here?
I'm using After Effects CS6 windows Server 2008 64bit.
Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Hi Myleniu,
Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
I'm starting to think that win server might be the problem. -
PROBLEM WITH DW LAYER HIDING/UNHIDING
I've serious problem and trouble in working with layer. I've
created my webpage with layers. I have several layers and sublayers
inside each. However I'm not albe to work easy with these . I need
to load some layers on webpage load. Attaching behaviour at the
index loading I cannot see in the windows that appear what are the
current layers shown, active, or hided or predefined. the window is
unresizable and I guess this is a bug of dreamweaver.
PLEASE SOMEONE CAN HELP ME HO WBYPASSING THIS PROBLEM?
Thanks
VIKTOR
Text> I've created my webpage
> with layers.
Yes, this could be a serious problem. Make sure you know
these -
http://www.thepattysite.com/layer_laws.cfm
and then make sure you understand this -
http://www.great-web-sights.com/g_layer-overlap.asp
Now, please post a link to the page so I can see what you
have.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"coolplus" <[email protected]> wrote in
message
news:e27h4a$cnc$[email protected]..
> I've serious problem and trouble in working with layer.
I've created my
> webpage
> with layers. I have several layers and sublayers inside
each. However I'm
> not
> albe to work easy with these . I need to load some
layers on webpage load.
> Attaching behaviour at the index loading I cannot see in
the windows that
> appear what are the current layers shown, active, or
hided or predefined.
> the
> window is unresizable and I guess this is a bug of
dreamweaver.
> PLEASE SOMEONE CAN HELP ME HO WBYPASSING THIS PROBLEM?
>
> Thanks
> VIKTORText
> -
Character set problem with transportable tablespace
Hi,
I'm trying to import a transportable tablespace with data pump into a database with a different character set compared to the source database. I know this is by default not possible. But there's no violating data in the tablespace that could make it a problem when transfering the TS. So I issued 'ALTER SYSTEM SET "_tts_allow_nchar_mismatch"=true;' on the target to force the import. However; I still get the eror:
ORA-29345: can not plug a tablespace into a database using a different character set
How can I fix this?Hi,
What're the character sets of the source and target database?
A general restriction of transportable tablespace is that the source and target databases must use the same database character set.
Regards
Nat -
Time effect problem with adjusment layer
Hi,
I made an adjustment layer above two footages. Everything is working (color, levels etc.) with that except time effects. When I drag twixtor to it the video turns to red. The original picture:
The twixtored one:
And when I use timewarp effect this happens:
The lower side has crapped out and even my black and white color has been removed. Is it because of the size or fps or what else?
(720p footages, 50 fps, I changed comp size, version is AE CS6 11.0.0.378)Pre-compose or render the comp that you want to speed up or slow down. Add a solid. Apply Twixtor to the solid. Use the pre-comp as the source and make the time changes you are planning.
-
.png transparency- problem with underlying layer control
I have an opaque orange rectangle with a clear uneven square cut into it through which I am displaying a slideshow (Spry Image Slideshow) and it works fine except that I cannot control the slideshow with my cursor. I can control the slideshow fine when it is on top of the rectangle, but I want the cutout to act as a frame on top of the slideshow.
Is the transparency in the .png akin to a sheet of glass? If so can I access the controller somehow through the "glass" with some added code?Hi
You cannot place a 'layer' over the slideshow, as this 'layer', (Is this an ap div?) will then 'have focus' above the slideshow and anything underneath this, (the slideshow controls) will not be selectable.
You could program your own event handlers in javascript to control the slideshow, but this will require you to have a reasonable understanding of javascript programming.
PZ
Maybe you are looking for
-
I recently bought a Macbook Pro back in March 2012 to replace a deceased iMac G5. Assuming all my music was dead and gone, I began building my new library on my Macbook ever since. Recently, I was able to remove the hard drive from my older G5 and fo
-
HH5 (Type A) - Drop-out issues now resolved? Still...
I have had a quick read about the forums - nothing conclusive on this one and as BT told us time and time again there wasn't a fault with the HH5 I don't suppose there will be an official post confirming a fix :-) So, I had an HH3 with external VDSL
-
Runnning report from Sap menu screen
hi my client is running loan management module. in some transaction when he presses a button on the sap menu ( something called cash flow) , SAP generates a table with all calculated values and stuff ( like a report ) . they want a different output
-
If I have iOS 5.1 how can I update to 6
If I have iOS 5.1 how can I update to 6 & 7
-
Why "kgepop: no error frame to pop to for error 1801"
when i use wrap.exe, the err message in the title always appears. D:\>c:\oracle\ora92\bin\wrap.exe iname=mypro.tmp oname=mypro.plb kgepop: no error frame to pop to for error 1801