Problems between HP network printer, WRT55AG, and wireless-G devices...help!

I'm having a weird problem that I just can't figure out.  If I connect my HP LaserJet 2605dn printer via Ethernet to my WRT55AG router, all of the devices on my network (wireless-A, Ethernet) can see/access the printer except for the wireless-G devices.  However, if I connect the printer via Ethernet to a wireless-G bridge, and then use the bridge to connect wirelessly to my router, my wireless-G devices can access the printer without any problems.
Here's a little more info.  If I reset the router, the wireless-G devices are able to access the printer (connected to the routher via Eithernet) up until the point when I enable WEP...then the printer is inaccessible from the wireless-G devices.  I've made sure that all of my WEP keys are correct; besides, the wireless-A devices can access the printer with WEP enabled and the wireless-G devices can connect to all the other devices on the network.
I suspect that something is screwy between the printer and the router.  Using the wireless bridge is an acceptable work-around, but it bugs me that I can't get this working the "right" way.
Oh yeah...the firmware on both the printer and the router is up-to-date.

Have you tried reinstalling the drivers for the printer?

Similar Messages

  • Problem on installing network printer Officejet Pro x451dw

    Problem on installing network printer Officejet Pro x451dw
    Hello everyone. I'm trying to install the above printer on my PC belonging to a network of about 7 pc. I should say that on the PC in question is running Windows XP Professional SP3 and that the printer has already been installed on other computers in the network and is functioning. I tried using both the driver CD that can be found on the HP website and they both do not give errors during instalation, indeed, perfectly detect the printer and its IP address, so the installation finishes successfully, but the press the test page, the waiting time extends until the error message "unable to print the document." I also made ​​an attempt with the software "hp scan doctor" and also this does not detect errors up to the test of the final print, that does not go through. At this point the software calls to make a print "internal" that this time occurs. The suggestion is to uninstall and then reinstall the HP software, but this intervention does not have a positive outcome. How else could I do attempt ??? I ask for help! Thank you for your attention. regards Roberto
    Problema su installazione di rete stampante Officejet Pro x451dw
    Salve a tutti. Sto cercando di installare la suddetta stampante sul mio PC appartenente ad una rete di circa 7 pc. Devo premettere che sul pc in questione è installato Windows Xp Professional SP3 e che la stampante è stata già installata sugli altri computer della rete ed è funzionante. Ho provato ad utilizzare sia il driver del CD che quello reperibile sul sito HP ed entrambi non danno errori in fase di instalazione, anzi, rilevano perfettamente la stampante ed il suo indirizzo IP, così l'installazione si conclude con esito positivo, ma alla stampa della pagina di prova il tempo di attesa si protrae fino al messaggio di errore " impossibile stampare documento ". Ho anche fatto un tentativo con il software "hp scan doctor" ed anche quest'ultimo non rileva errori fino alla prova di stampa finale, che non va a buon fine. A questo punto il software invita a effettuare una stampa " interna" che questa volta avviene. Il suggerimento è quello di disinstallare il software hp per poi reinstallare, ma anche questo intervento non ha esiti positivi. quale altro tentativo potrei fare ??? Chiedo aiuto ! Grazie per l'attenzione. Saluti Roberto

    Hi
    Install the full software on your computer and follow the following instructions:
    Step 1: Print out a network report by pressing the "Setup" icon on the display,Choose Printer reports and select network configuration report and make a note of the IPV4 address from the document.
    Step 2: On your computer,Go to control panel,Choose printers and faxes.Right click on the X451 printer and choose Properties.
    >>Then select Ports>Add Ports>Standard TCP/IP Port,Click on new port whicjh would open up an installation wizard.
    >>Click on Next and type in the IPV4 address an the box,Click on next>Finish
         Donot forget to click on apply and try printing a Test page.
    I hope this helps.

  • After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

    After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

    Hi,
    What version of the OS did you upgrade from ?
    Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
    In the Apple Icon menu use the About this Mac item.
    In the new panel click twice on the line that tells you the current OS level
    It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
    If it is missing you need to get it replaced.
    (It is supposed to be done on Repair or Refurbishment).
    An Apple Store or Apple Authorised Service Provider as the best choices.
    There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
    8:56 pm      Sunday; November 24, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    Message was edited by: Ralph Johns (UK)

  • PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP.  HOW DO WE FIX THIS?

    PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP.  HOW DO WE FIX THIS?

    cherifrombartlett wrote:
    PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION
    What are you talking about? If I'm not not mistaken the iPad was released in April 2010 so there is no 2009 iPad version.
    Typing in all capital letters in a forum like this is considered to be rude and all capital letters indicate that you are shouting.

  • I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default

    I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default. This was after I tried to implement the steps set out in Real World Photoshop CS5. I stuggele to match the colours of my two screens, the one a laptop and the other a LCD and the printer, even after calibration with Spyder 3. Really lost at present.

    Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
    Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
    If that didn't help, try here >  Apple - Support - iPad - Wi-Fi Assistant
    And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

  • HT1414 forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    I forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n.  It is a network printer. Not Wireless.

    How do I connect a network printer to ipad 3. I have a wireless router on my LAN.  I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN.  The printer is not on the AirPrint list. The printer is not wireless.

    Hello,
    I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes. 
    Thanks!

  • Get network printer ip and name

    how can i get network share printer ip and name in oracle 10g developer.

    From where do you want to get this? On the client? In that case you can use client_win_api_environment.read_registry to get the value from the registry (if the client is on Windows. Don't ask me which key :-) ).

  • Network Printer for 1 user...help???

    You've done a pretty good job of investigating and reporting on the problem; well done!
    I would suggest checking the event log; see if there are any warnings in there. But otherwise, it looks like it might just be easier to delete the account and create a new one.

    Help!!
    I have a windows server 2008 r2 running a print services.  +/- 30 network printers.  The specific printer in question has "Everyone" set as "Print" access. 
    I have one user trying to print to 1 of those printers from his desktop PC.
    Everyone is able to use the printer as expected... except for 1 user.
    I have uninstalled/reinstalled the printer from his computer, rebooted said computer and printer.   And nothing...no windows test page.. nothing.
    I log in with my account on his computer and the printer works as expected.    Use his account on another computer and it works as expected.
    So I have narrowed it down to his user log on with his computer.  
    Is my only choice to blow away his account and re-create it?
    Thanks!
    This topic first appeared in the Spiceworks Community

  • What is the difference between MOVE var1 TO var2 and var2 = var1? Help!

    Hi Experts,
        What is the difference between MOVE var1 TO var2 and var2 = var1?
    Thanks
    Gopal

    Gopal,
      pls. look into it.Good explanation on you requirement.
    To assign the value of a data object <f1> to a variable <f2>, use the following statement:
    MOVE <f1> TO <f2>.
    or the equivalent statement
    <f2> = <f1>.
    The contents of <f1> remain unchanged. <f1> does not have to be a variable - it can also be a literal, a text symbol, or a constant. You must always specify decimal points with a period (.), regardless of the user’s personal settings.
    Multiple value assignments in the form
    <f4> = <f3> = <f2> = <f1>.
    are also possible. ABAP processes them from right to left as follows:
    MOVE <f1> TO <f2>.
    MOVE <f2> TO <f3>.
    MOVE <f3> TO <f4>.
    In the MOVE statement (or when you assign one value to another with the equal sign), it is not possible to specify the field names dynamically as the contents of other fields. If you need to do this, you must use field symbols .
    There are three possible outcomes of assigning <f1> to <f2>:
    The data objects <f1> and <f2> are fully compatible, that is, their data types, field length, and number of decimal places are identical. The contents of source field <f1> are transferred byte by byte into the target field <f2> without any further manipulation. The MOVE statement is most efficient when this is the case.
    The data objects <f1> and <f2> are incompatible. This is the case, for example, if the two fields have the same type, but different lengths. The contents of the source field <f1> are converted so that they are compatible with the data type of <f2>, and are then transferred. This procedure only works if a conversion rule exists between the data types of <f1> and <f2>. Type conversions make the MOVE statement less efficient. How much less efficient depends on the individual conversion.
    The data objects <f1> and <f2> are incompatible, and no conversion is possible. The assignment is not possible. If this can be recognized statically, a syntax error occurs. If it is not recognized before the program is run, a runtime error occurs.
    The source and target fields can be of different data types. In contrast to other programming languages, where the assignment between different data types is often restricted to a small number of possible combinations, ABAP provides a wide range of automatic type conversions.
    For example, the contents of a source field with an elementary data type can be assigned to a target field with any other data type. The single exception to this rule is that it is not possible to assign values between type D fields and type T fields. ABAP even supports assignments between a structure and an elementary field, or between two structures.
    DATA: T(10) TYPE C,
          NUMBER TYPE P DECIMALS 2,
          COUNT  TYPE I.
    T = 1111.
    MOVE '5.75' TO NUMBER.
    COUNT = NUMBER.
    Following these assignments, the fields T, NUMBER, and COUNT have the values ‘1111      ’, 5.75, and 6 respectively. When you assign the number literal 1111 to T, it is converted into a character field with length 10. When you assign NUMBER to COUNT, the decimal number is rounded to an integer (as long as the program attribute Fixed pt. arithmetic has been set).
    Pls. reward if useful

  • Help!  Strange Problem with 23" Apple Cinema Display and Wireless Internet

    For some reason, Safari runs much much slower on my housemates new 23" Apple Cinema Display than just on his new Macbook. He is running Tiger. We use Airport Extreme for house-wide wireless, and he has an Airport Express to connect to his printer. Here is what he wrote:
    "Last night, I was watching videos on ABC.com --- not a problem to watch on my laptop screen (new Macbook) - very fast. Then, after dinner, I plugged in my external screen (Apple Cinema Display), and it was so slow and wouldn't load. I unplugged the screen, and it was lighting fast again, so I watched the videos on my laptop screen. This morning, I was plugged into the external monitor and the Internet was slow to check my email. I unplugged the screen, and it's lightning fast now on my laptop screen.
    Does this make any sense??? Why would my external monitor affect the Internet speed? "

    I am having a similar problem as well. When I attach my 23" cinema display to my MacBook core 2 duo, my connection to the internet immediately stops working. I have tested this several times and it happens every time I connect the Cinema Display to my MacBook. When I disconnect the Cinema Display, my internet connection works perfectly again. I'm stumped as to why this happens.
    I have tried several different searches on the forums, but have found no other threads besides this one. I'm I won't have to suck it up and pay the $50 for the call to AppleCare support.

  • Connecting Network Printer to New Wireless Network

    We just changed our router from one our normal phone company provided to a mobile "hot spot" from our cellular phone compnay.  We have a HP Deskjet 6980 that I need to switch to the new network but the new router doesn't have any "SecureEasySetup" button or any ethernet or USB ports to connect to.  How do I get the printer to recognize the new network?

    Hi hjmcm,
    I hate to hear you are having issues.  If the router does not have a WPS button or Ethernet ports, we are limited in the ability to connect the device to the network.  If you currently have a computer running an operating system that coincides with the original software CD or you have an XP machine this may be possible.  Due to the age of the product, this would require the full feature software to be installed on an operating system of XP or earlier with a USB cable, then converted to wireless.  For additional information about this product, Click Here. 
    Try this:
    1. Locate original software CD or download the full feature software for an XP machine from Here  
    2. Install the unit with a USB cable
    3. Convert connection type (see below)
    To change a USB connection to a wireless connection
    1. Unplug the USB connection from the back of the printer.
    2. Insert the printer software CD in the computer CD-ROM drive or access setup through HP folder (start-all programs-HP folder-device name) if installed with download, and then follow the on screen instructions. This runs the Setup Wizard.
    3. On the Connection Type screen, select Wireless, and then click Next.
    4. Follow the onscreen instructions to complete the network installation.
    5. When the installation is complete, open Printers and Faxes in Control Panel and delete the printers for the USB installation.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Access network printer w/o wireless

    I recently purchased a laser printer, airport express, and thought I was merrily sharing my printer with my roommate who does not have an airport connection, but is plugged into our Lynxs wireless router with a coax cable. It was working fine. Then one day my computer was off and he no longer had access to the printer.
    Does my airport enabled computer have to be on for him to access the airport express connected printer? He's always plugged into the router and gets internet through it whether my computer is on or not?
    I guess I'm missing something about networks. Any info appreciated.
    Theo
    Dual 1 Gig G-4   Mac OS X (10.4.9)  

    Ok I have since learned that my laptop will not connect with the printer unless the other computer is on as well. My laptop has an airport extreme card. It has been suggested to me by a Linksys employee that my other computer is the access point-not the router! I guess that means everything broadcasts to the other computer first which then send the signal to the printer? I guess that would include the computer that is hardwired to the router as well. I'm having a hard time wrapping my head around this. Any thoughts would be appreciated.
    TC

  • Unit of measure problem between Order UOM, Base UOM and Inspetion UOM

    Material: ROH-001
    Base UOM: Meter
    Order UOM: Kilogram
    Inspection UOM: Roll
    I have already maintained conversion factor in material master between meter and kilogram.
    Is there any way to maintain KG in inspection plan header level and Roll in inspeciton plan operation level?
    I tested, but the sample quantity is not as expected. Below is my testing data, please advise, thanks.
    10 KG = 1,989 M
    100 KG = 1 Roll
    GR: 100,000 KG = 198,900,000 M
    Sample size = 200 Roll  (My expected sample size is 50 Roll)
    Sampling plan:
       Lot size                  Sample size           c1                 d1
                   8            5     0     1
                  15            5     0     1
                  25            5     0     1
                  50            5     0     1
                  90            20     1     2
                 150            20     1     2
                 280            32     2     3
                 500            50     3     4
                1200            80     5     6
                3200            125     7     8
               10000      200     10     11
               35000      315     14     15
              150000     500     21     22
              500000     500     21     22
         10000000000     500     21     22

    sorry, my mistake.
    This is  applicable.
    Problem solved.

  • Problem centering page when printing: Lion and CS 5

    Just installed Apple's Lion. Am running Illustrator CS 5.
    Went to print a file, chose the center on page option from the new icon in Adobe's Print dialog box. The page does not print centered on the paper. It prints way off!
    I can get the page to print to fit the page, borderlessly, which is what I would like to do now; but, I have to select the option to fit in the upper left corner. I am now anticipating problems in the future when I simply want to print a page centered.
    This could be an Adobe, Apple, or Epson problem (I have an Epson Stylus Photo 1400); or a combination.
    Has anyone else experienced this? Does it happen on other apps? Is there a place to report bugs to Adobe?

    Good call! After your post, I did run Software Update, but the only thing there was an iTunes update. I do recall seeing an Epson printer update in the last day or two; but, I don't recall which of my computers called for it. In any case, on this computer, after checking Software Update and finding nothing, there is still an issue printing centered pages from Illustrator CS 5 15.0.2.

Maybe you are looking for