Problems capturing DV video that has 32k audio

While capturing in a project that has a basic set up for DV/PAL 48kz, I keep getting warnings after capture, that the frequency of my captured material does not match my project settings and there might be synchro problems with my audio later!
My problem is that if I can change my sequence set up to 32k - a frequency that seemingly matches the video I am trying to capture (showing on my video monitor what I think is the 32kz info) I cannot find how to actually _set up the project for audio at 32k_ . For PAL video, the only choice I have seems to be for audio at 48kz.
I am getting confused and my audio not in sync...
Anybody could unconfuse and re-sync me ?
Thanks

From the menu bar: Final Cut Pro > Audio/Video Settings > Capture Presets.
You will see that the setting for DV PAL has a lock next to it, to indicate that it cannot be changed.
Click on Duplicate. You can now make the changes that you need.
Match those settings to what you shot.

Similar Messages

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • How to edit both audio tracks with video that has two tracks?

    I have video that has 2 tracks with it. Both however are marked ch. 1 on the premiere timeline. The properties say they are 48000 hz audio. Now when i hilight both tracks and right click to edit in Audition, only one comes over. I am wondering a few things here. Why are they both the same channel and how can i edit both of them at once since they ae exactly the same in Audition? Do i even need both tracks?

    Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

  • A problem with Yotube Videos that run on flash

    Yotube Videos that run on flash load for a while then stop loading permanently and the video freezes. Im not experiencing this problem with videos that don't have adds and use HTML5 .I have tried everything from reinstalling flash to removing cookies to trying other web browsers. please help.
    (note that bofor this problem happened i updated to the latest version of mountain lion)

    amad55 wrote:
    i just relised that the problem happens to videos that only have a (MACKEEPER) add , when different adds appear the videio works normaly and doesnt freez, what do i do ?
    Since you mention MacKeeper, I'd suggest taking a look at this thread: https://discussions.apple.com/thread/3952819

  • I am having trouble with Itunes registering the Mp4 video that has been converted.  Help!!

    I am having trouble with Itunes registering the MP4 video that has been converted.  Help!

    What do you mean by iTunes registering the mp4?
    Which iTunes, on iPad, iTunes is a Store and it won't take your .mp4.
    On pc, check if it supports the mp4 (there are a number of different mp4 format) you have converted.
    Can you import it to computer iTunes?

  • HT3775 i cant play some videos that has flv please any solution to it? thanks

    i cant play some videos that has flv please any solution to it? thanks

    agodey4,
    Some reading here, mant players for download, do w= a web search.
    http://www.ifunia.com/mac-os/howto-play-flv-videos-on-mac-os-x-lion.html

  • Hi I would like to know how I can view a video that has been send via mail. When I tap on the video it only gives me the option to send iit as mail again

    Hi  I would like to know how I can view a video that has been send to me via email. When I tap on the video icon it only gives me option to send as a mail or to open in drop box which I don't want to open in.

    Welcome to the Apple community.
    If you are doing this from your phone (as you mention) then you can use the new iPhoto Photo Journal feature to do this.
    Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage.

  • Problem capturing video that has no timecode

    I have some video that I want to capture in FCP that is on a VHS tape. So, I hooked up the VCR to my camcorder then camcorder to my computer, of course. The video plays in my log and capture window. So far everything is cool. The problem occurs when I try to capture the video. FCP can't find a time code from the VHS tape and won't start to capture. Is there a way to capture without timecode? Or, what can I do to capture this video?

    All true...
    OP...bear in mind that Sugarmansmile's suggestion would be optimal, if you ever need to recapture the media...you'd need the timecode.
    Any quality hit is happening in the DV device anyway, so it's simply a matter of time to dub (for timecode) vs. speed (without timecode).
    K

  • Problems capturing VHS video - help please (Elements 11)

    I've tried without success trying to capture a VHS tape into Elements 11 for two hours now and really need some guidance please.
    The hardware is a Win 7 64 bit desptop and my VCR player is connected to the PC via a Canopus ADVC55 firewire connection, through an S-video and L/R audio inputs. The VHS tape is a Japanese one whihc plays fine through the VCR when it is connected directly to my TV.
    The capture process I'm trying to use is "DV Camcorder" but I keep getting an error message in the capture window stating that "Camera settings do not agree with project settings" and that the capture process may not work properly.
    To solve this I've tried almost all the NTSC settings in the New Project dialogue box. Sometimes the Canopus isn't recognised, sometimes it is but I get the above error message but nothing gets captured.
    I would have thought the correct project setting would be NTSC/DV/Standard 48kHz but i just get the error message. When I ticked the "force these settings for the project" box I got an immediate blue screen of death!
    I'm obviously doing something - or several things - that aren't right. I'd be very grateful if somebody could put me straight. All over the internet are articles saying how easy this VHS to DVD transfer is!!
    TIA. John.

    Thank you very much gentlemen for your help and advice. I've had a whale of a time this afternoon trying to make some sense of the problem.
    I've downloaded WinDV and updated the Firewire drivers. I've checked Device Manager and there is nothing there about dropped frames or timcodes. I've also tried every combination of the Canopus dipswitches making sure that I reboot bewteen setting changes. I've tried 2 different VHS players and also swapped out the cables. I've also found an old Miglia capture device and tried that as well in case the problem lies with the Canopus.
    The conclusions so far:-
    1. Using WinDV with the Canopus set to NTSC I get a picture straight away no problem and audio works as well. BUT the pictures are in black & white not colour.
    2. The Canopus doesn't pass the video through to WinDV with the dipswitches set to PAL - the status light stays red.
    3. So going back to elements 11 I've tried both dipswitch settings. With PAL the Canopus doesn't pass the signal through as for WinDV.
    4. With Elements 11 with the dipswitch set to NTSC and the New Project settings at PAL/HD/Standard 48kHz I get the error message about "Camera settings and Project settings being different" and my PC hangs completely.
    5. With Elements 11 with the dipswitches set to NTSC and the New Project settings at NTSC/HD/Standard 48kHz I get the message as above but if I close it then the "record" button is inactive and no video is recorded.
    6. And those results are the same for both VHS players.
    7. With The Miglia device I get no picture or sound with either WinDV or Elements 11 no matter what type of VHS tape I try to record.
    And that's as far as I've got.
    Are there any other Project settings I should try? Can anybody help with the Black and White issue with WinDV?
    I just want to get the VHS recorded via any piece of software now!
    Thanks again.

  • Please help me load an .flv video that has been embeded onto a web page

    Hello there,
    I was hoping someone on this forum could please help me with one specific problem that I am having. I would like to embed the a flash player into an html page, and load the video from a service that has the streaming video provided.
    This is the context of the situation...
    We have created a site that was to be used on a showroom floor (no internet connection) and loaded the .flv videos at the local root level for the site.
    Now however, we would like it to be an online site. I have been able to use the flash "jw player"to load videos to play using the shadowbox javascript, but when I try to embed it onto a page and have it play, it isn't working and I am not sure why.
    Below is the code that is currently working to load the videos on the local root level.
    Might someone have any ideas on what I need to replace to have it load the videos from the streaming service?
    I would greatly appreciate any assistance that could be provided.  I can also provide a URL if it would help.
    I would GREATLY appreciate any assistance provided.
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
    swfobject.registerObject("player1","9.0.98","expressInstall.swf");
    </script>
    <object id="player1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="640" height="380">
    <param name="movie" value="player.swf" />
    <param name="allowfullscreen" value="true" />
    <param name="allowscriptaccess" value="always" />
    <param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
    <object type="application/x-shockwave-flash" data="player.swf" width="640" height="380">
    <param name="movie" value="player.swf" />
    <param name="allowfullscreen" value="true" />
    <param name="allowscriptaccess" value="always" />
    <param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
    <p><a href="http://get.adobe.com/flashplayer">Get Flash</a> to see this player.</p>
    </object>
    </object>

    Hello,
    Thanks  a lot for the reply.  However, I am pretty confident that the jw player supports the streaming video option, but as I mentioned that I was able to use it as a popup using the shadowbox javascript before. After doing a bit of investigating on how the videos are hosted, I am using "progressive download" method for these videos.
    I think the problem is that the player.swf is hosted on my website server -  and the videos are then hosted on the media hosting service.  I think that the player needs to be located on the media hosting service, and then embedded onto the page along with where to point to the .flv video.  Does that sound right?
    If so, the paramater I am using to embed the player as I mentioned in my original post is simply:
    <param name="movie" value="player.swf" />
    does the "value" then have to change to the http:// address for the video player.swf that would then be hosted on my video hosting service?
    Little help?
    Please let me know if there is anything I can provide to clarify the issue.
    Thanks
    M

  • Problem capturing PAL video into FCE HD

    I'm having a problem capturing video from a PAL MiniDV tape. The tape was recorded on a PAL camera during a shoot in India; when I got home with the tapes the cameraman gave me, I was unable to view them on (or capture them from) my (NTSC) Canon GL-1 to my PowerBook G4 running FCE HD3.5.1 (external hard drive).
    I borrowed a friend's Sony Handycam and CAN view the tape without a problem on that, AND get a "VTR OK" message in the FCE "Capture" window (though I get color bars and a "Preview Disabled" screen). I can also control the tape playback from the FCE Capture interface.
    However, when I click "Capture Now", after clicking the "Play" button, I get a dialogue box that says "This operation could not be completed as there is no video."
    I have tried a number of different "Easy Setup" device control options, but to no avail.
    Can anyone help? Thanks!

    I'm going to correct myself ... although I was able to capture the contents of ONE tape, after that the problem returned and I cannot capture anything else (even that same tape). So it seems the "solution" was not "FireWire-all-the-way" but remains out of my reach for the moment ...

  • Menu problems - changing background video length to fit audio

    Hi,
    I've been struggling for hours (feels like weeks!) trying to adjust the background video length to match the audio length on my encore menu to prevent the white screen appearing once the background video has finished.
    Having read through some previous questions on here I see the general advice is to adjust the audio length to match the video length but is there really no way of doing it the other way around?
    I tried editing the background video in premier pro, and managed to do that effectively so it was identical in length to the audio track, however then I couldn't work out how to export it back into encore so it would use it as a menu.
    I'm still getting to grips with all the software so any help would be greatly appreciated!
    Thank you!!
    Liz

    Hi jsbman,
    Thanks for your reply, I'm not sure I was totally clear about what I am trying to do. Basically I have a menu image with background video that currently runs on a loop of 16 seconds, and I have an audio file (song) that lasts 3 minutes and also loops. I can put the audio on the menu fine as long as I have menu with no background video but if I try and have both it runs but then goes to a white menu screen after the 16 second loop while the audio continues to the end.
    I understand from what I have read that the audio track and video background need to be the same length (I guess so they can loop together or something) and to edit the audio track down to 16 seconds makes it pretty pointless in using. This is why I have been trying to increase the background video to the same length as the audio track. They will then both loop until play is pressed on the remote for the DVD to start.
    I forgot to say in my original post I am using CS4, with Windows 7 - I'm not sure if that makes a difference.
    Any ideas welcome!
    Thanks
    Liz

  • Can anyone stabilize this video that has some minor, key camera jumps?

    I have around fifteen seconds of video that forms a flashback in my short.  Unfortunately, the recording suffered from some tiny bouncing in our floorboards which we couldn't pick up on the monitor.
    I've tried the standard warp stabilizer in Premiere CS6 and even the motion tracking using points in After Effects, but either my skills aren't up to it or there just aren't enough points in the footage to track.
    The closest I can get is separating the footage into three sections, correcting them individually and then trying to realign them using scale and position - but given that it's a fixed frame and is being shown on a large screen, even the tiniest of remaining movements are visible.  It looks fixed in the preview screen but shows up on the HD export.  Is anyone able to shed some light on this one?
    This is the take that would be ideal to correct:
    http://speedy.sh/uvtep/MVI-0410.MOV
    Or failing that, there's this one:
    http://speedy.sh/zDk2F/MVI-0404.MOV
    There's a second or two of shake at the very beginning and end, but that can be completely jetissoned.  The audio featured in these clips also won't be used, as'll be obvious when you see it.
    If anyone can suggest where I can cut this and what settings I can use on the warp stabilizer to get this perfect, I'll be forever in your debt.
    Thanks to you all as always and have a great night,
    Lee

    I haven't tried anything yet but at first look the little glitch in the first shot  only lasts a frame or two. Have you tried time remapping to remove the offending frames? This is the wrong kind of motiion for Warp Stabilizer to help with. AE's point tracker or Mocha is far better suited to the job.
    Second, I noticed the shots have not been trimmed. It's usually a good standard practice to trim your shots before stabilizing. I always leave a few frames at each end to facilitate editing but it's usually a waste of production time to stabilize an entire take.
    OK, I took about 2 minutes to use the point tracker on about 10 frames where the camera jumps around a bit. Worked perfectly by simply selecting the top right corner of the card and using stabilize motion.
    Here's an AEP with the fixed shot. You can adjust the in and out points as needed and scale the shot up if you need to fix the edges of the frame. You'll have to replace the footage with your first shot.
    As I was cleaning up my desktop I took a last look and noticed that the jitter is not uniform. If you stabilize the corner of the card then the package stills moves a bit. I had the best luck tracking the intersection of the package and the card. and the corner of the card by stabilizing scale and rotation. This tells me that it is more likely that the table rocked changing perspective than the camera was bumped. Either way, there is no way to make the shot absolutely perfect without warping the image. I'm not sure it would be worth it.
    The hardest part about video production is deciding when you're done.

  • I am trying to use video that has sound throughout it. I want the sound to remain in it's current time locations but want to replace parts of the video with pics

    I am tring to make a movie on IMovie that has continous film footage with sound.  I want to retain the flow and current time location of the sound...but replace portions of the streaming video with still pictures without losing the current placement of the sound track portion of the current film.  Please help.  Thanks  Philfrompendleton

    use the keyword 'cut away' in iMovie's built-in Help for detailed advice ... 

  • Problem Synchronizing Multiple Video Clips to One Audio Clip

    So i recently shot some video for a cool project I have coming up however I am having issues with Synchronizing the Audio and Videot together in Final Cut Pro X. I have used Final Cut Pro X since Day 1 that it came out and I thought I had a pretty good grasp on how Synchronizing Clips and MultiCam worked. I record my audio separately so in the past I would start recording on the TasCam Recorder (Wireless lav set up) I have, start recording on the DSLR and end up with both a video and audio clip. I would take these into Final Cut Pro and highlight both and use the "Synchronize Clips" command to pair them both into a single clip and then turn off the natural audio from the DSLR and begin my cuts. I thought I had done this with multiple clips before without issue but I seem to have a problem now.
    Yesterday I shot 50 interviews. I pressed record on the Audio Recorder in the beggining and let it run for the full 2 hours, giving me one long audio file. Instead of wasting video space on my CF Card, I started and stopped recording for each of the 50 interviewees. My goal and what I thought would work was to highlight all 50 video clips and the 1 audio clip and say Synchronize Clips. This did not work. Upon looking at the Synchronize Clips in depth, i noticed that it synched all of my video stacked in the beggining in the first couple minutes. It didn't sync all of my clips, it merely just put them in the same timeline all up front.
    I then tried to highlight all and do the same thing with MultiCam, however thought it matched a few more clips, it still had an issue of not synching the way I was hoping for.
    I was wondering if anyone has had this issue in the past and what they might have done to fix it. Does FCPX have a limit on the number of clips it can Synchronize? Does anyone have any ideas for workflow for synchronizing all of these clips? In the future upcoming shoots should i resort back to starting and stopping audio recording the same way I start and stop video recording and then pairing individual interviews later?

    So i just read this in the support for FCPX
    Final Cut Pro analyzes the clips for sync points such as markers you’ve added, timecode, file creation date, and audio content. If no sync points can be found, the clips are synced at their respective starting points.
    This is what I am aiming for , however not what I am getting. The piece about how the clips sync via timecode, markers, and creation date/time intrigue me though. There is no timecode cause my external audio is just a wav file, but maybe I can get it to sync better via markers? Has anyone else had this issue? Maybe my audio file being close to 2 hours is too long?

Maybe you are looking for